user interface customized with VI does not
Hello
I tried to use a user interface customized for VBAI using VI. I got to the point where I can run the VI all by himself and to see the work of logic. However when I add to as part of the user interface and switch to the inspection mode and run it, it does nothing. Let me know if I'm doing something wrong. Attached you will find the program, I work with.
Thank you.
I just tried your VI... you must have a VI that does not forever in a loop. You can use some time recording the loop that runs once and uses the SHIFT to follow the previous results of previous runs of the step. Use of the is the first call? Primitive in LV to initialize the first shift register. Here is a modified Test.vi that will work better.
Tags: NI Hardware
Similar Questions
-
User interface customized to run at the same time?
Hello
My question is about the user interfaces customized for performances with the parallel model. In my current project, we use the parallel model with sockets to the UI and test 4, we have flags of chain for its execution, which displays messages to the user and the other 2 which has the function of a streaming indicator that displays information throughout the test, also showing instances of time. So, in total 8 indicators that display information about the 4 independent runs alongside. Up to now, I managed to create the user interface only for the sequential mode, using 2 simple string indicators and sending messages to the TestStand to the strings through the user interface Messages. My problem is that I don't know how to implement this feature for the sockets to test more.
Attached images of the façade and the diagram of blog of the GUI as it appears now.
I am very new to TestStand (I know that for the last month), so I expect that my question and description of cases are not so clear, so please let me know if anything is badly explained.
I would be grateful for any help.
Basically, whenever you get a message from UI associated with running (e.g. UIMsg_StartExecution, UIMsg_Trace, etc.), you will need to determine what testsocket the UIMessage applies to and then update the corresponding user interface controls. A way to get the testsocket is as follows:
testsocketindex = uimsg. Thread.GetSequenceContext (0, frameId_Notused). AsPropertyObject(). GetValNumber ("RunState.TestSockets.MyIndex", 0)
In addition, once you know where to go a particular run, you can attach to the control Id of this execution (i.e. property of Execution.Id) and just look at the execution Id instead.
Hope this helps,
-Doug
-
Display success or failure of the images only in the user interface custom
I built a user interface customized to my project VBAI 2010 that displays 2 images from 2 different cameras. I want to have the "View menu" available for an operator to choose between images, only passed, only having failed, etc. The view menu is using the default user interface, but when I build a custom one from one of the templates, this option is no longer available. How can I get the view menu to show up? If I can't do it, is there a good work around for this?
This is the VI amended with an additional option for any display puts is not up to date.
If you do advanced UIS Custom like this, you should definitely check out LabVIEW. You can even install it for evaluation to try... later, when you're not on the customer site
Hope this helps,
Brad
-
When I send someone a document I changed if his crossing of the stuff or by adding arrows, when the customer print, it does not show my changes, I'm going through our prices so visitors cannot see and when the customer print them they can see prices?
You probably use drawing markup tools. There are options to print with or without annotations. You can not change this.
If you don't want them to see the prices, either remove the original document and recreate the pdf without them there or you can use the redaction tools in the full paid for version of Adobe Acrobat Pro.
-
I can't connect to my user account name, and it does not accept my password.
I can't connect to my user account name, and it does not accept my password.
Hi Jillgatewood,
You did a recovery password file? You can use it to reset your password. Unfortunately if you have lost or forgotten your password, you will need to consult this article KB http://support.microsoft.com/kb/189126/en-gb
-
ORA-01917: user or role ' OPS$ MSMIT110 ' does not exist
Hi all
I have a user OPS$ msmit110 in my database KONQ. I want to revoke create session privilege from this account. But when I try, I get error ORA-01917 same account already exists in the database. Here are the details:
Konq > select name, open_mode from v$ database;
NAME OPEN_MODE
--------- ----------
KONQ READ WRITE
Konq > select username, account_status, profile from dba_users where username = ' OPS$ msmit110 ";
USERNAME ACCOUNT_STATUS PROFILE
------------------------------ -------------------------------- ------------------------------
OPS$ msmit110 OPEN ENDUSER_PROFILE
Konq > select the BENEFICIARY, the PRIVILEGE of dba_sys_privs where DEALER = ' OPS$ msmit110 ";
HOLDER OF PRIVILEGE
------------------------------ ----------------------------------------
OPS$ msmit110 CREATE SESSION
Konq > revoke create session to OPS$ msmit110;
Revoke create session to OPS$ msmit110
*
ERROR on line 1:
ORA-01917: user or role ' OPS$ MSMIT110 ' does not exist
Please let me know the reason behind it and please help how can I solve this problem.
Kind regards
Michel
> revoke create session to OPS$ msmit110;
not as above but as below
Revoke create session of "OPS$ msmit110";
-
When I uninstall an application virtualized with ThinApp does not eliminate the root folder, any suggestions to fix this?
Can you try to change the shortcuts = active on all entry Points setting?
Change of Shortcuts=%Programs%\Check Point\Identity Shortcuts=%Programs%\IdentityAgent Agent
In this way, we can see if it's the second folder level do. Because when I use only one file, I don't get the issue you reported.
Out of curiosity:
It is a Security Check Point Software? What is doing? It works like a ThinApp package?
-
Error 1327.Invalid Drive: G:\ mapped to a user folder. The drive does not exist or could not be connected. You can disconnect the drive or reassign the drive letter. For details see http://kb2.adobe.com/cps/404/kb404946.html
Hi jamal d w,.
Please see the KB Doc to install error 1327. "Invalid drive" | CS4, CS5, Acrobat Reader | Windows - ive.html http://helpx.adobe.com/creative-suite/kb/install-error-1327-invalid-dr which explains how to solve your current problem.
-
Custom scan box does not touch "scan" because of my 13 "screen. Cannot reach it. How can I fix it? THX.
Try increasing your screen resolution.
-
So I have a macbook pro - and she advised me that I had to update my Adobe flash player. So I go through all the steps and I'm stuck at the last stage, where he asks me my user name and password. I go in there correctly - several times and it does NOT connect. He shakes to show that there's an error. Double check my file AND I go to the Adobe site to connect with the same information. and it works very well.
WHAT IS THE PROBLEM? Help please.
Could you please try ComputerName administrator as username and the password as password.
I hope this works.
Concerning
Hervé Khare
-
Custom class event does not reach Application?
Hey everybody,
It is probably a pretty easy question, but it left me speechless. I can handle the events of user interface components in the Application. I can handle the events of a custom user interface, within its own class object. But the dispatched event of a custom, object of the user interface does not seem to reach the Application. The event is expected to reach Application? Event if an object should be managed within the class of this object, how can I control my program flow?
Thank you!
I saw only he made in the settings where they inject an event dispatcher. If you don't want to use a frame, you could have a singleton (vomits in the throat) and pass a UIComponent. Now remember you this UIComponent must be fixed on the display as list
var vbox:Group = new Group();
vbox.dispatchEvent ("myEvent")
still will not be heard by the rest of the application. You would have to wait for a user interface component to add pass THEN to your singleton for use in the rest of the application. Honestly, I didn't think too much about.
-
Photosmart 5510 e - all-in - One: Photosmart 5510 - scanning with iMac does not work
After you have reinstalled the SW printer via the home network, the scan function is not visible when I opened the printer on my iMac. After the first installation has worked well. Then I had to reinstall all the SW on my Mac, so I lost the first installation of my printer. What can I do?
Hi @HWEB
What happens when you try to scan? Do you have a message of error before or during transmission scan, or do the software is not open? Maybe you can not locate the software now, or the software cannot communicate with the printer.
While I wait for you, if the problem occurs when you print from several programs, please follow the steps below and let me know the results of your efforts.
Scrub / uninstall
- Open the Applications folder > HP or Hewlett-Packard folder > Uninstall HP
- Click continue, click on one of the printers in the list.
- * Only perform this step if you have not all other HP printers. Press and hold the Option, control and command, while now the three buttons.
- Click Uninstall.
Manually uninstall the remaining files potentially - I apologize in advance is not a fun task! I'll try to make it easy to follow. Some of the files described in the following steps can be found, if you can't find one of the files or folders on your computer, do not be alarmed.
Move the files or folders to the Recycle Bin, drag and drop
- Macintosh HD/Applications / /Hewlett-Packard folder
- Macintosh HD/Library/Application Support /- delete all files and folders on HP/Hewlett Packard
- In Macintosh HD/Library/Caches - delete all files and folders on HP/Hewlett Packard
- Macintosh HD/Library/Documentation/Help /- delete all files and folders on HP/Hewlett Packard
- MacintoshHD/Library/Frameworks/HPServicesInterface.framework
- MacintoshHD/Library/Frameworks/HPSmartX.framework
- Macintosh HD/Library/Image Capture / TWAIN Data Sources /HP Scan Pro
- In Macintosh HD/Library/Image Capture/Scripts - delete all files and folders on HP/Hewlett Packard
- In Macintosh HD/Library/Preferences - delete all files and folders on HP/Hewlett Packard
Move the Macintoshloginwindow.plist on the desktop. NOTE: Does not delete the loginwindow.plist file during the manual uninstallation may cause uninstall be retained.
- In Macintosh HD/library/printers/hp - delete the folder
- In Macintosh HD/Library/StartupItems, drag the following files in the trash, IO HP and HP trap monitor
- In Macintosh HD/users/username (this should have a symbol of a house next to him) / Library/Preferences, drag the following files to the Trash: * all files starting with com.apple.print, * all files starting with com.hp, * all files beginning with Hewlett-Packard, * files starting with HP or hp
- In MacintoshHD/users/USERNAME/Library/printers, drag all all-in-one printers listed here in the trash.
- Drag the icons of HP from the dock and drop it onto a blank space on the desktop. The icon will disappear.
Close all open windows.
Turn it back on.
Empty the trash.Reset the printing system
- Click on the Apple icon ( ), then click on System Preferences.
-
Interface Web of SGE2000 does not
Get a blank screen in the two settings of the web interface when you are connected. Cannot know why it will not load.
SW worm 3.0.0.18
Start: 2.0.0.03
HW Ver: 00.00.01
Have tried to use the easy upgrade tool and get a caveat: not found device information. Application will end.
Step 1: trying to open the telnet connection...
Information STEP1:Gathering
show the system - control of result for «show system unit 1-2»
Step1:type:
Step1:OID: 1.3.6.1.4.1.9.6.1.72.2000.2
Step1:sys name: company
Step1:location: Salledeserveurs.com
Step1:sys Contct: IT
Step1:MAC - address: f0:25:72:89:9e:e2Has anyone experience this problem? Any ideas how to fix?
Salvation of parking, if the GUI does not load, please try the following:
The same computer using IE, Firefox, Chrome, etc.
Another computer with the mentioned browsers (preferably Windows 7 or more)
If none of these works, try the plant selector as it seems that the software is hooked
-
Why is my link to Oracle 12 c with PostgreSQL does not?
My Oracle 12 c to PostgreSQL connection returns the following:
Select * from 'test"@PG_LINK '.
*
ERROR on line 1:
ORA-28500: connection between ORACLE and a non-Oracle system has sent this message:
connection string [unixODBC] lacks some options {08001, NativeErr = 202}
ORA-02063: preceding 2 lines of PG_LINK
Here's my setup. Someone at - it a time to take a look?
. ODBC.ini
[ODBC data sources]
PG_LINK = PostgreSQL
[PG_LINK]
Debug = 255
CommLog = 1
ReadOnly = no
Driver=/usr/pgsql-9.4/lib/psqlodbcw.so
ServerName = < delete the IP address >
FetchBufferSize = 99
User name = csm_test
Password = < removed >
Port = 5432
= Postgres database
TRACE = Yes
TraceFile=/tmp/sql.log
Protocol = 7.4
sslmode = disable
[Default]
Driver=/usr/lib64/liboplodbcS.so.1
initPG_LINK.ora
HS_FDS_CONNECT_INFO = PG_LINK
HS_FDS_TRACE_LEVEL = 255
HS_FDS_SHAREABLE_NAME=/ora/DBA/work/unixODBC/lib/libodbc.so
HS_LANGUAGE = AMERICAN_AMERICA. WE8ISO8859P1
HS_NLS_NCHAR = UCS2
Set ODBCINI=/u01/app/oracle/.odbc.ini
Generated trace file: PG_LINK_agt_13870.trc
Oracle Corporation - Tuesday 20 October 2015 15:04:11.308
Heterogeneous Agent release
- 12.1.0.2.0
Oracle Corporation - Tuesday 20 October 2015 15:04:11.307
Version 12.1.0.2.0
Hgogprd entries
HOSGIP to 'HS_FDS_TRACE_LEVEL' returned '255 '.
Hgosdip entries
default assignment of 50 HS_OPEN_CURSORS
setting HS_FDS_RECOVERY_ACCOUNT or 'RECOVER '.
HS_FDS_RECOVERY_PWD layout to the default
default HS_FDS_TRANSACTION_LOG of HS_TRANSACTION_LOG layout
HS_IDLE_TIMEOUT layout to the default 0 value
layout by default HS_FDS_TRANSACTION_ISOLATION of "READ_COMMITTED".
HOSGIP returned the value of 'UCS2' for HS_NLS_NCHAR
layout HS_FDS_TIMESTAMP_MAPPING default 'DATE '.
layout HS_FDS_DATE_MAPPING default 'DATE '.
layout HS_RPC_FETCH_REBLOCKING failure to 'ON '.
HS_FDS_FETCH_ROWS layout without '100 '.
parameter HS_FDS_RESULTSET_SUPPORT default 'FALSE '.
parameter HS_FDS_RSET_RETURN_ROWCOUNT default 'FALSE '.
parameter HS_FDS_PROC_IS_FUNC default 'FALSE '.
parameter HS_FDS_MAP_NCHAR if there is no 'TRUE '.
setting HS_NLS_DATE_FORMAT or 'YYYY-MM-DD HH24:MI:SS ".
parameter HS_FDS_REPORT_REAL_AS_DOUBLE default 'FALSE '.
HS_LONG_PIECE_TRANSFER_SIZE layout without "65536".
parameter HS_SQL_HANDLE_STMT_REUSE default 'FALSE '.
parameter HS_FDS_QUERY_DRIVER if there is no 'TRUE '.
parameter HS_FDS_SUPPORT_STATISTICS default 'FALSE '.
parameter HS_FDS_QUOTE_IDENTIFIER if there is no 'TRUE '.
setting in HS_KEEP_REMOTE_COLUMN_SIZE if 'OFF '.
parameter HS_FDS_GRAPHIC_TO_MBCS default 'FALSE '.
parameter HS_FDS_MBCS_TO_GRAPHIC default 'FALSE '.
Default value of 64 assumed for HS_FDS_SQLLEN_INTERPRETATION
setting HS_CALL_NAME_ISP to "gtw$:SQLTables;gtw$:SQLColumns;gtw$:SQLPrimaryKeys;gtw$:SQLForeignKeys;gtw$:SQLProcedures;gtw$:SQLStatistics;gtw$:SQLGetInfo;gtw$:OPTTables;gtw$:OPTColumns;gtw$:OPTPrimaryKeys;gtw$:OPTForeignKeys;gtw$:OPTProcedures;gtw$:OPTStatistics"
parameter HS_FDS_DELAYED_OPEN if there is no 'TRUE '.
HS_FDS_WORKAROUNDS layout by default "0".
HS_WORKAROUNDS layout by default "0".
Release of hgosdip, rc = 0
ORACLE_SID is 'PG_LINK '.
Product information:
Port RLS / Upd:2 / 0 PrdStat:0
Agent: Oracle Database Gateway for ODBC
: Installation
Class: ODBC, ClassVsn:12.1.0.2.0_0023, Instance: PG_LINK
Release of hgogprd, rc = 0
hostmstr: 0: HOA after hoagprd
hostmstr: 0: HOA before hoainit
Hgoinit entries
HOCXU_COMP_CSET = 1
HOCXU_DRV_CSET = 31
HOCXU_DRV_NCHAR = 1000
HOCXU_DB_CSET = 873
HS_LANGUAGE is american_america.we8iso8859p1
RC = 32512 trying to get environment variable LANG.
HOCXU_SEM_VER = 121000
HOCXU_VC2_MAX = 4000
HOCXU_RAW_MAX = 2000
Entry hgolofn to 2015/10/20-15: 04:11
HOSGIP to 'HS_FDS_SHAREABLE_NAME' returned ' / ora/dba/work/unixODBC/lib/libodbc.so '.
Entry hgolofns to 2015/10/20-15: 04:11
LIBNAME=/ora/DBA/work/unixODBC/lib/libodbc.so, funcname is SQLAllocHandle
symbol_peflctx = 0xdc741040
hoaerr:0
Out of hgolofns to 2015/10/20-15: 04:11
Entry hgolofns to 2015/10/20-15: 04:11
LIBNAME=/ora/DBA/work/unixODBC/lib/libodbc.so, funcname is SQLBindCol
symbol_peflctx = 0xdc741180
hoaerr:0
Out of hgolofns to 2015/10/20-15: 04:11
Entry hgolofns to 2015/10/20-15: 04:11
LIBNAME=/ora/DBA/work/unixODBC/lib/libodbc.so, funcname is SQLBindParameter
symbol_peflctx = 0xdc741970
hoaerr:0
Out of hgolofns to 2015/10/20-15: 04:11
Entry hgolofns to 2015/10/20-15: 04:11
LIBNAME=/ora/DBA/work/unixODBC/lib/libodbc.so, funcname is SQLCancel
symbol_peflctx = 0xdc742c20
hoaerr:0
Out of hgolofns to 2015/10/20-15: 04:11
Entry hgolofns to 2015/10/20-15: 04:11
LIBNAME=/ora/DBA/work/unixODBC/lib/libodbc.so, funcname is SQLDescribeParam
symbol_peflctx = 0xdc74adb0
hoaerr:0
Out of hgolofns to 2015/10/20-15: 04:11
Entry hgolofns to 2015/10/20-15: 04:11
LIBNAME=/ora/DBA/work/unixODBC/lib/libodbc.so, funcname is SQLDisconnect
symbol_peflctx = 0xdc74b220
hoaerr:0
Out of hgolofns to 2015/10/20-15: 04:11
Entry hgolofns to 2015/10/20-15: 04:11
LIBNAME=/ora/DBA/work/unixODBC/lib/libodbc.so, funcname is SQLEndTran
symbol_peflctx = 0xdc74ddd0
hoaerr:0
Out of hgolofns to 2015/10/20-15: 04:11
Entry hgolofns to 2015/10/20-15: 04:11
LIBNAME=/ora/DBA/work/unixODBC/lib/libodbc.so, funcname is SQLExecute
symbol_peflctx = 0xdc74f420
hoaerr:0
Out of hgolofns to 2015/10/20-15: 04:11
Entry hgolofns to 2015/10/20-15: 04:11
LIBNAME=/ora/DBA/work/unixODBC/lib/libodbc.so, funcname is SQLFetch
symbol_peflctx = 0xdc74fc10
hoaerr:0
Out of hgolofns to 2015/10/20-15: 04:11
Entry hgolofns to 2015/10/20-15: 04:11
LIBNAME=/ora/DBA/work/unixODBC/lib/libodbc.so, funcname is SQLFreeHandle
symbol_peflctx = 0xdc7516a0
hoaerr:0
Out of hgolofns to 2015/10/20-15: 04:11
Entry hgolofns to 2015/10/20-15: 04:11
LIBNAME=/ora/DBA/work/unixODBC/lib/libodbc.so, funcname is SQLFreeStmt
symbol_peflctx = 0xdc7516c0
hoaerr:0
Out of hgolofns to 2015/10/20-15: 04:11
Entry hgolofns to 2015/10/20-15: 04:11
LIBNAME=/ora/DBA/work/unixODBC/lib/libodbc.so, funcname is SQLGetData
symbol_peflctx = 0xdc752cb0
hoaerr:0
Out of hgolofns to 2015/10/20-15: 04:11
Entry hgolofns to 2015/10/20-15: 04:11
LIBNAME=/ora/DBA/work/unixODBC/lib/libodbc.so, funcname is SQLGetEnvAttr
symbol_peflctx = 0xdc756050
hoaerr:0
Out of hgolofns to 2015/10/20-15: 04:11
Entry hgolofns to 2015/10/20-15: 04:11
LIBNAME=/ora/DBA/work/unixODBC/lib/libodbc.so, funcname is SQLGetFunctions
symbol_peflctx = 0xdc7563c0
hoaerr:0
Out of hgolofns to 2015/10/20-15: 04:11
Entry hgolofns to 2015/10/20-15: 04:11
LIBNAME=/ora/DBA/work/unixODBC/lib/libodbc.so, funcname is SQLMoreResults
symbol_peflctx = 0xdc757e20
hoaerr:0
Out of hgolofns to 2015/10/20-15: 04:11
Entry hgolofns to 2015/10/20-15: 04:11
LIBNAME=/ora/DBA/work/unixODBC/lib/libodbc.so, funcname is SQLNumResultCols
symbol_peflctx = 0xdc758a30
hoaerr:0
Out of hgolofns to 2015/10/20-15: 04:11
Entry hgolofns to 2015/10/20-15: 04:11
LIBNAME=/ora/DBA/work/unixODBC/lib/libodbc.so, funcname is SQLParamData
symbol_peflctx = 0xdc758d50
hoaerr:0
Out of hgolofns to 2015/10/20-15: 04:11
Entry hgolofns to 2015/10/20-15: 04:11
LIBNAME=/ora/DBA/work/unixODBC/lib/libodbc.so, funcname is SQLPutData
symbol_peflctx = 0xdc75ac30
hoaerr:0
Out of hgolofns to 2015/10/20-15: 04:11
Entry hgolofns to 2015/10/20-15: 04:11
LIBNAME=/ora/DBA/work/unixODBC/lib/libodbc.so, funcname is SQLRowCount
symbol_peflctx = 0xdc75b060
hoaerr:0
Out of hgolofns to 2015/10/20-15: 04:11
Entry hgolofns to 2015/10/20-15: 04:11
LIBNAME=/ora/DBA/work/unixODBC/lib/libodbc.so, funcname is SQLSetEnvAttr
symbol_peflctx = 0xdc75cfe0
hoaerr:0
Out of hgolofns to 2015/10/20-15: 04:11
Entry hgolofns to 2015/10/20-15: 04:11
LIBNAME=/ora/DBA/work/unixODBC/lib/libodbc.so, funcname is SQLSetDescRec
symbol_peflctx = 0xdc75cd90
hoaerr:0
Out of hgolofns to 2015/10/20-15: 04:11
Entry hgolofns to 2015/10/20-15: 04:11
LIBNAME=/ora/DBA/work/unixODBC/lib/libodbc.so, funcname is SQLColAttribute
symbol_peflctx = 0xdc743720
hoaerr:0
Out of hgolofns to 2015/10/20-15: 04:11
Entry hgolofns to 2015/10/20-15: 04:11
LIBNAME=/ora/DBA/work/unixODBC/lib/libodbc.so, funcname is SQLColumns
symbol_peflctx = 0xdc744f40
hoaerr:0
Out of hgolofns to 2015/10/20-15: 04:11
Entry hgolofns to 2015/10/20-15: 04:11
LIBNAME=/ora/DBA/work/unixODBC/lib/libodbc.so, funcname is SQLConnect
symbol_peflctx = 0xdc748960
hoaerr:0
Out of hgolofns to 2015/10/20-15: 04:11
Entry hgolofns to 2015/10/20-15: 04:11
LIBNAME=/ora/DBA/work/unixODBC/lib/libodbc.so, funcname is SQLDescribeCol
symbol_peflctx = 0xdc74a6c0
hoaerr:0
Out of hgolofns to 2015/10/20-15: 04:11
Entry hgolofns to 2015/10/20-15: 04:11
LIBNAME=/ora/DBA/work/unixODBC/lib/libodbc.so, funcname is SQLDriverConnect
symbol_peflctx = 0xdc74bda0
hoaerr:0
Out of hgolofns to 2015/10/20-15: 04:11
Entry hgolofns to 2015/10/20-15: 04:11
LIBNAME=/ora/DBA/work/unixODBC/lib/libodbc.so, funcname is SQLExecDirect
symbol_peflctx = 0xdc74ee50
hoaerr:0
Out of hgolofns to 2015/10/20-15: 04:11
Entry hgolofns to 2015/10/20-15: 04:11
LIBNAME=/ora/DBA/work/unixODBC/lib/libodbc.so, funcname is SQLForeignKeys
symbol_peflctx = 0xdc750520
hoaerr:0
Out of hgolofns to 2015/10/20-15: 04:11
Entry hgolofns to 2015/10/20-15: 04:11
LIBNAME=/ora/DBA/work/unixODBC/lib/libodbc.so, funcname is SQLGetConnectAttr
symbol_peflctx = 0xdc7519f0
hoaerr:0
Out of hgolofns to 2015/10/20-15: 04:11
Entry hgolofns to 2015/10/20-15: 04:11
LIBNAME=/ora/DBA/work/unixODBC/lib/libodbc.so, funcname is SQLGetDescField
symbol_peflctx = 0xdc7533d0
hoaerr:0
Out of hgolofns to 2015/10/20-15: 04:11
Entry hgolofns to 2015/10/20-15: 04:11
LIBNAME=/ora/DBA/work/unixODBC/lib/libodbc.so, funcname is SQLGetDescRec
symbol_peflctx = 0xdc753930
hoaerr:0
Out of hgolofns to 2015/10/20-15: 04:11
Entry hgolofns to 2015/10/20-15: 04:11
LIBNAME=/ora/DBA/work/unixODBC/lib/libodbc.so, funcname is SQLGetDiagField
symbol_peflctx = 0xdc754c40
hoaerr:0
Out of hgolofns to 2015/10/20-15: 04:11
Entry hgolofns to 2015/10/20-15: 04:11
LIBNAME=/ora/DBA/work/unixODBC/lib/libodbc.so, funcname is SQLGetDiagRec
symbol_peflctx = 0xdc755870
hoaerr:0
Out of hgolofns to 2015/10/20-15: 04:11
Entry hgolofns to 2015/10/20-15: 04:11
LIBNAME=/ora/DBA/work/unixODBC/lib/libodbc.so, funcname is SQLGetInfo
symbol_peflctx = 0xdc756db0
hoaerr:0
Out of hgolofns to 2015/10/20-15: 04:11
Entry hgolofns to 2015/10/20-15: 04:11
LIBNAME=/ora/DBA/work/unixODBC/lib/libodbc.so, funcname is SQLGetStmtAttr
symbol_peflctx = 0xdc757060
hoaerr:0
Out of hgolofns to 2015/10/20-15: 04:11
Entry hgolofns to 2015/10/20-15: 04:11
LIBNAME=/ora/DBA/work/unixODBC/lib/libodbc.so, funcname is SQLGetTypeInfo
symbol_peflctx = 0xdc757a90
hoaerr:0
Out of hgolofns to 2015/10/20-15: 04:11
Entry hgolofns to 2015/10/20-15: 04:11
LIBNAME=/ora/DBA/work/unixODBC/lib/libodbc.so, funcname is SQLPrepare
symbol_peflctx = 0xdc7594d0
hoaerr:0
Out of hgolofns to 2015/10/20-15: 04:11
Entry hgolofns to 2015/10/20-15: 04:11
LIBNAME=/ora/DBA/work/unixODBC/lib/libodbc.so, funcname is SQLPrimaryKeys
symbol_peflctx = 0xdc7599e0
hoaerr:0
Out of hgolofns to 2015/10/20-15: 04:11
Entry hgolofns to 2015/10/20-15: 04:11
LIBNAME=/ora/DBA/work/unixODBC/lib/libodbc.so, funcname is SQLProcedureColumns
symbol_peflctx = 0xdc759fd0
hoaerr:0
Out of hgolofns to 2015/10/20-15: 04:11
Entry hgolofns to 2015/10/20-15: 04:11
LIBNAME=/ora/DBA/work/unixODBC/lib/libodbc.so, funcname is SQLProcedures
symbol_peflctx = 0xdc75a670
hoaerr:0
Out of hgolofns to 2015/10/20-15: 04:11
Entry hgolofns to 2015/10/20-15: 04:11
LIBNAME=/ora/DBA/work/unixODBC/lib/libodbc.so, funcname is SQLSetConnectAttr
symbol_peflctx = 0xdc75b320
hoaerr:0
Out of hgolofns to 2015/10/20-15: 04:11
Entry hgolofns to 2015/10/20-15: 04:11
LIBNAME=/ora/DBA/work/unixODBC/lib/libodbc.so, funcname is SQLSetStmtAttr
symbol_peflctx = 0xdc75e360
hoaerr:0
Out of hgolofns to 2015/10/20-15: 04:11
Entry hgolofns to 2015/10/20-15: 04:11
LIBNAME=/ora/DBA/work/unixODBC/lib/libodbc.so, funcname is SQLSetDescField
symbol_peflctx = 0xdc75c9d0
hoaerr:0
Out of hgolofns to 2015/10/20-15: 04:11
Entry hgolofns to 2015/10/20-15: 04:11
LIBNAME=/ora/DBA/work/unixODBC/lib/libodbc.so, funcname is SQLStatistics
symbol_peflctx = 0xdc75fc30
hoaerr:0
Out of hgolofns to 2015/10/20-15: 04:11
Entry hgolofns to 2015/10/20-15: 04:11
LIBNAME=/ora/DBA/work/unixODBC/lib/libodbc.so, funcname is SQLTables
symbol_peflctx = 0xdc760920
hoaerr:0
Out of hgolofns to 2015/10/20-15: 04:11
Release of hgolofn, rc = 0 to 2015/10/20-15: 04:11
HOSGIP to 'HS_OPEN_CURSORS' returned '50 '.
HOSGIP to 'HS_FDS_FETCH_ROWS' returned '100 '.
HOSGIP for "HS_LONG_PIECE_TRANSFER_SIZE" returned "65536".
HOSGIP to 'HS_NLS_NUMERIC_CHARACTERS' returned '. "
HOSGIP to 'HS_KEEP_REMOTE_COLUMN_SIZE' returned 'OFF '.
HOSGIP for "HS_FDS_DELAYED_OPEN" returns 'TRUE '.
HOSGIP to 'HS_FDS_WORKAROUNDS' returned '0 '.
HOSGIP to 'HS_FDS_MBCS_TO_GRAPHIC' returned 'FALSE '.
HOSGIP to 'HS_FDS_GRAPHIC_TO_MBCS' returned 'FALSE '.
Invalid value of 64 for HS_FDS_SQLLEN_INTERPRETATION
treat_SQLLEN_as_compiled = 1
Release of hgoinit, rc = 0 to 2015/10/20-15: 04:11
hostmstr: 0: HOA after hoainit
hostmstr: 0: HOA before hoalgon
Entry hgolgon to 2015/10/20-15: 04:11
name: csm_test, reco:0, tflag:0
Entry hgosuec to 2015/10/20-15: 04:11
Release of hgosuec, rc = 0 to 2015/10/20-15: 04:11
HOSGIP to 'HS_FDS_RECOVERY_ACCOUNT' returned 'RECOVER '.
HOSGIP for "HS_FDS_TRANSACTION_LOG" returns "HS_TRANSACTION_LOG".
HOSGIP to 'HS_FDS_TIMESTAMP_MAPPING' returned 'DATE '.
HOSGIP to 'HS_FDS_DATE_MAPPING' returned 'DATE '.
HOSGIP for "HS_FDS_MAP_NCHAR" returns 'TRUE '.
HOSGIP to 'HS_FDS_RESULTSET_SUPPORT' returned 'FALSE '.
HOSGIP to 'HS_FDS_RSET_RETURN_ROWCOUNT' returned 'FALSE '.
HOSGIP to 'HS_FDS_PROC_IS_FUNC' returned 'FALSE '.
HOSGIP to 'HS_FDS_REPORT_REAL_AS_DOUBLE' returned 'FALSE '.
using csm_test as a default schema
HOSGIP to 'HS_SQL_HANDLE_STMT_REUSE' returned 'FALSE '.
Entry hgocont to 2015/10/20-15: 04:11
HS_FDS_CONNECT_INFO = "PG_LINK".
RC =-1 of HOSGIP for 'HS_FDS_CONNECT_STRING '.
Entry hgogenconstr to 2015/10/20-15: 04:11
DSN:PG_LINK, name: csm_test
OPTN:
Entry hgocip to 2015/10/20-15: 04:11
DSN:PG_LINK
Release of hgocip, rc = 0 to 2015/10/20-15: 04:11
# > connection settings (len = 37) < #.
# DSN = PG_LINK;
#! UID = csm_test;
#! PWD = *.
Release of hgogenconstr, rc = 0 to 2015/10/20-15: 04:11
Entry hgopoer to 2015/10/20-15: 04:11
hgopoer, line 240: had native error 202 and sqlstate 08001; message follows...
connection string [unixODBC] lacks some options {08001, NativeErr = 202}
Release of hgopoer, rc = 0 to 2015/10/20-15: 04:11
hgocont, line 2812: call SqlDriverConnect obtained sqlstate 08001
Out of hgocont, rc = 28500 at 2015/10/20-15: 04:11 with the ptr error FILE: hgocont.c LINE: 2832 ID: something else that permission is not valid
Out of hgolgon, rc = 28500 at 2015/10/20-15: 04:11 with the ptr error FILE: hgolgon.c LINE: 751 ID:Calling hgocont
hostmstr: 0: HOA after hoalgon
The RPC nscontrol (0), rc = 0
hostmstr: 0: CPP before release Agent
hostmstr: 0: HOA before hoaexit
Entry hgoexit to 2015/10/20-15: 04:11
Release of hgoexit, rc = 0
hostmstr: 0: HOA after hoaexit
hostmstr: 0: CPP after release Agent
Entry horcrces_CleanupExtprocSession to 2015/10/20-15: 04:11
Entry horcrpooe_PopOciEnv to 2015/10/20-15: 04:11
Entry horcrfoe_FreeOciEnv to 2015/10/20-15: 04:11
Out of horcrfoe_FreeOciEnv to 2015/10/20-15: 04:11
Entry horcrfse_FreeStackElt to 2015/10/20-15: 04:11
Out of horcrfse_FreeStackElt to 2015/10/20-15: 04:11
Out of horcrpooe_PopOciEnv to 2015/10/20-15: 04:11
Out of horcrces_CleanupExtprocSession to 2015/10/20-15: 04:11
Generated file /tmp/sql.log
$ sql.log more
[ODBC] [13870] [1445367851.328257] [SQLSetConnectAttr.c] [396]
Entry:
Connection = 0x167eccc0
Attribute SQL_ATTR_AUTOCOMMIT =
Value = (none)
StrLen = - 5
[ODBC] [13870] [1445367851.328328] [SQLSetConnectAttr.c] [671]
Output: [SQL_SUCCESS]
[ODBC] [13870] [1445367851.328861] [SQLDriverConnect.c] [728]
Entry:
Connection = 0x167eccc0
Hdl window = (none)
In = str [DSN = PG_LINK; UID = csm_test; [PWD = *] [length = 37]
Str Out = 0x167eeda8
Str on Max = 1024
Str Out Ptr = 0x7fffb8d3d3d0
End = 0
UNICODE using the ASCII coding ' ANSI_X3. 4-1968' and UNICODE "UCS - 2".
Connection DIAG string [08001] lacks some options
[ODBC] [13870] [1445367851.346106] [SQLDriverConnect.c] [1454]
Output: [SQL_ERROR]
[ODBC] [13870] [1445367851.346277] [SQLGetDiagRec.c] [686]
Entry:
Connection = 0x167eccc0
= 1 REC number
SQLState = 0x7fffb8d3d040
Native = 0x7fffb8d3cdf4
0x7fffb8d3ce00 = message text
Length of the buffer = 510
Text Len Ptr = 0x7fffb8d3cdf2
[ODBC] [13870] [1445367851.346325] [SQLGetDiagRec.c] [723]
Output: [SQL_SUCCESS]
SQLState = 08001
Native = 0x7fffb8d3cdf4-> 202
Text message = [[unixODBC] connection string does not have certain options]
[ODBC] [13870] [1445367851.346404] [SQLGetDiagRec.c] [686]
Entry:
Connection = 0x167eccc0
Number of REC = 2
SQLState = 0x7fffb8d3d040
Native = 0x7fffb8d3cdf4
0x7fffb8d3ce00 = message text
Length of the buffer = 510
Text Len Ptr = 0x7fffb8d3cdf2
[ODBC] [13870] [1445367851.346438] [SQLGetDiagRec.c] [723]
Output: [SQL_NO_DATA]
[ODBC] [13870] [1445367851.346579] [SQLDisconnect.c] [208]
Entry:
Connection = 0x167eccc0
[ODBC] [13870] [1445367851.346614] [SQLDisconnect.c] [237] error: 08003
[ODBC] [13870] [1445367851.346714] [SQLFreeHandle.c] [284]
Entry:
Handle Type = 2
Handful of entry = 0x167eccc0
[ODBC] [13870] [1445367851.346748] [SQLFreeHandle.c] [333]
Output: [SQL_SUCCESS]
[ODBC] [13870] [1445367851.348941] [SQLFreeHandle.c] [219]
Entry:
Handle Type = 1
Handful of entry = 0x167d9f30
Hello
It could be either odbc.ini information is not correct, but you can also check that you set the variables 'env' LD_LIBRARY_PATH and ODBCINI to point to the location of the files.
Kind regards
Mike
-
Custom pages OAF does not not in the R 12.2.4 upgrade
Hi guys,.
We are upgrading to R R 11.5.10.2 12.2.4. We have copied our instance of generation of Production and improved to R 12.2.24. Now, there is a problem with the custom pages OAF. It seems that the custom java class files are not get covered by the application.
Since it is the body build, I am applying custom patch directly in the file system to run (fs1) and I am getting below error while executing one of the custom of the OPS page:
oracle.apps.fnd.framework.OAException: could not create Java class: (oracle.apps.xxfe.f486.asn.lead.webui. ASNLeadQryCOEx) associated with the area: (ASNLeadQryRN). It is probably because the class name is incorrect or not included in the project.
at oracle.apps.fnd.framework.webui.OAPageErrorHandler.prepareException(OAPageErrorHandler.java:1247)
at oracle.apps.fnd.framework.webui.OAPageErrorHandler.processErrors(OAPageErrorHandler.java:1435)
at oracle.apps.fnd.framework.webui.OAPageBean.processRequest(OAPageBean.java:2848)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:1991)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:567)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:455)
I think that it is simply saying that it couldn't find the java class. But I checked in the system as indicated below, the class files are roughly:
$ cd $JAVA_TOP
$ cd oracle/apps/xxfe/f486/asn/lead/webui /.
$ ls - ltr
total 10
-rw - r - r - 1 a2bur12a s/n 5693 7 Jan 13:23 ASNLeadLstCOEx.class
-rw - r - r - 1 a2bur12a s/n 3397 7 Jan 13:23 ASNLeadQryCOEx.class
I also checked the class path, which is also to top java:
$ cd $JAVA_TOP
$ pwd
/ opt/lapp121/FS1/EBSapps/COMN/java/classes
$ echo $CLASSPATH
/opt/lapp121/fs1/EBSapps/comn/util/jdk32/lib/dt.jar:/opt/lapp121/fs1/EBSapps/comn/util/jdk32/lib/tools.jar:/opt/lapp121/fs1/EBSapps/comn/util/jdk32/jre/lib/rt.jar:/opt/lapp121/fs1/EBSapps/comn/shared-libs/ebs-3rdparty/WEB-INF/lib/ebs3rdpartyManifest.jar:/opt/lapp121/fs1/FMW_Home/Oracle_EBS-app1/shared-libs/ebs-fmw/WEB-INF/lib/ebsFMWManifest.jar:/opt/lapp121/fs1/FMW_Home/Oracle_EBS-app1/shared-libs/ebs-appsborg/WEB-INF/lib/ebsAppsborgManifest.jar:/opt/lapp121/fs1/FMW_Home/oracle_common/modules/oracle.uix_11.1.1/uix2.jar:/opt/lapp121/fs1/EBSapps/comn/java/classes:/ opt/lapp121/fs1/EBSapps/10.1.2/forms/java:/opt/lapp121/fs1/EBSapps/10.1.2/forms/java/frmall.jar:/opt/lapp121/fs1/EBSapps/10.1.2/jlib/ewt3.jar:/opt/lapp121/fs1/EBSapps/10.1.2/j2ee/OC4J_BI_Forms/applications/formsapp/formsweb/WEB-INF/lib/frmsrv.jar
I've heard that it takes run the utility adcgnjar and when I tried, I got the message below:
Generation customall.jar...
Do not create custom not customall.jar like no java directory under JAVA_TOP.
Maybe it's because the location of the custom folder which is$JAVA_TOP/oracle/apps/xxfe
I also tried to install these custom features of the OPS in online marking (as per my understanding following the features of online marking is not required (this is just an instance of generation) so earlier I had installed directly in the file system to run). But in following mode of patch, I had some error in ADOPTION (prepare) as below:
FATAL ERROR *.
PROGRAM: (/ opt/lapp121/fs1/EBSapps/appl/ad/12.0.0/patch/115/bin/txkADOPPreparePhaseSynchronize.pl)
TIME: Fri Jan 9 15:07:37 2015
FUNCTION: main::validatePatchLocation [level 1]
ERRORMSG: / opt/lapp121/fs_ne/EBSapps/patch/19258581 directory does not exist.
[UNEXPECTED] Error occurred during execution 'perl /opt/lapp121/fs1/EBSapps/appl/ad/12.0.0/patch/115/bin/txkADOPPreparePhaseSynchronize.pl-
Notice that I use the commands below to bounce at the intermediate level:
- stop adapcctl.sh
- admanagedsrvctl.sh stop oacore_server1
- Enter the password for Weblogic: < pass >
- admanagedsrvctl.sh start oacore_server1
- Enter the password for Weblogic: < pass >
- adapcctl.sh start
I am mainly looking for the installation of this file system customization to run if it is absolutely not necessary to do so in the patch file system.
Please let me know if anyone knows about it, or any way to go?
Thank you
Anupam
Hello
I could solve this problem. I am writing the solution that worked for reference:
- When the custom java files are placed in one of the shipped Oracle directories of the application (for example $JAVA_TOP/oracle/apps/fnd, $JAVA_TOP/oracle/apps/ad, etc) then the creation of custom jar file is not necessary.
- When the custom java files are placed in $JAVA_TOP /
/ and then run the utility adcgnjar.
- Deploy customizations that are created in the package. oracle.apps.xxprod * and no xxprod.oracle.apps. * or xxprod.oracle.apps.xxprod. * on EBS 12.2.X?
It was our case because we have a custom directory under $JAVA_TOP/oracle/apps/xxfe
When the custom java files are placed in any other non-standard location (for example $JAVA_TOP/oracle /, $JAVA_TOP/oracle/java / etc) then custom jar file must be created manually and must be made available for WebLogic to pick it up.
Detailed instructions are given below:
Create a temporary custom.zip file that contains the entire application customized to the non-standard location directories/files:
(1) cd $JAVA_TOP
(2) zip r - customprod.zip. Where the list of all directory paths are present, compared to $JAVA_TOP for the custom to the non-standard location application java files.
Generate customprod.jar file & sign 3).
Command: adjava oracle.apps.ad.jri.adjmx - areas $JAVA_TOP/customprod.zip - outputFile $JAVA_TOP / customprod.jar - jar $CONTEXT_NAME 1 CUST jarsigner - storePass - keyPass
(4) delete temporary customprod.zip.
Command: rm $JAVA_TOP/customprod.zip
(5) follow the steps below to allow the custom WebLogic jar
(a) to take a backup copy of the existing /admin/template/ebsProductManifest_xml.tmp
(b) modify /admin/template/ebsProductManifest_xml.tmp to add the customprod.jar (after customall.jar)
(c) execute AutoConfig
(d) bounce midrange services
Thank you
Anupam
Maybe you are looking for
-
First HP: (IF) Arc integral Leght returning another integral
Hello! I'm trying to adjust the length of the arc of the function y (x) = 2.5 + 9 * xˆ2 - 0.5xˆ4, between the points x = 0 and x = 4. The calculation to do is to solve the inegral from 0 to 4 of dx sqrt (1 +(18*x-2*xˆ3) ˆ2) The question is: When tryi
-
Printer will not connect via USB
HP lj1022 printer will not connect not not via the USB port after the installation of the new driver upgrade hp lj1020/1022 for Windows 7 (64-bit). Driver seems to install properly until the moment where he is asked to connect the USB cable. Then he
-
A 2nd generation of death motorcycle g after upgrade to android 6
my phone finished 1 month warranty back I got the new update of motorola... Start the upgrade then finish asking to reboot I rebooted my phone and I got error and I restarted my phone with a blank black screen...! I guarantee that they said that you
-
Hello: Our HARD drive was damaged and lost everything. No matter because I have a backup of files, but I've lost my Windows 7 recovery partition. I have exactly 5 computers of this model. Is it possible to create recovery disks from any application o
-
Laptop screen turns black/inactive after being closed and reopened
When I close the lid of my laptop and open it again the screen is black or inactive. I do nothing as possible re - turn on the screen not to mention that my laptop restarts. What should I do? I have a Dell Inspiron 6000 and am running XP 32 bit.