Availability of vCenter [Noob Question)

Similar Questions

• Noob question: Playbooks all have the same performance?

  I know... noob question. I am to complete my first game PlayBook and before I submit the app store I wanted to make sure that hardware performance will be the same on all the playbook or will it be something because of the performance issues on a per-device basis? I hope that this will be similar to a console where you can expect stable performance. THX.

  All devices (currently) work the same in the same conditions.

  That does not mean, however, that you can treat it as a console.  A console runs only a game and nothing else (in general).

  The PlayBook can run multiple applications, and among other things, a user can 'Behavior of the Application' setting configuration Mode Showcase, default, or standby, what determines if your application runs or stops when it is idle.  If they are in window mode, they may have other things at the same time.

  To a first approximation, however, "even in the world" is probably correct, for now.  Don't forget there will be different tablets in the future, with specification different but compatible with your app... not quite like a console there where many games is basically orphaned (or requires a port) when a new generation comes out.

• Noob question: autonomous AIR .bar files?

  Sorry for the noob question, yet to learn these things from the air. When we create a .bar file, it is the only file position, does it include the runtime air, flash, etc, etc, or is it always require an accumulation of air / flash runtimes on the device? THX.

  The .bar file does not include the time of execution because the runtime is already preinstalled on the Playbook.

  Air is really integrated into the PlayBook so you don see the difference between a native app or an Air application.

• NooB question: Cup titles and a schedule of transfer

  Let's say I have tons of tracks.  In the Middle, I find I want to firm up a few seconds of footage.  I can cut, or delete the clip, but I still have to select all the following clips and make sure they move upward.  There must be a smarter way of removing a few seconds of footage and moving upward?

  Sorry for the noob question, I searched on google and didn't know what to look for.  I am open for more information that can help me to tighten my research thus.  See you soon.

  The answer will probably depend on more factors:

  Are there in your Timeline, Clips above the area of the Clip you want to Trim?

  What you want to happen to those?

  Are you only concerned to "strengthen" the Clips on the same video track where you cut, or Clips on other tracks video too?

  It is likely that the tool Edit Ripple, or Rt-click and Ripple delete, will do what you want, but who can count on the other Clips on other tracks, and video that you need.

  Good luck and please let us know a little more.

  Hunt

• D.I. box noob question

  Hi all

  Sorry for the noob question, but I need something clear up if possible. I was about to buy a box for injection and then had a query on them, and if I actually could benefit in this scenario...

  
  Fig 1. is how I currently record.

  Fig 2. is how I would do it with di direct box

  

  My question is... in this configuration, the d.i. box would make a difference to the signal? or he would only make a difference if I was going to live guitar to box, the sound card?

  Thank you for all your help.

  In my opinion you have basically three alternatives for the recording of the guitar:

  1. get an amp excellent sound, recording with a microphone, or more, in a room of good survey.

  Challenges: you'll probably need a studio proper, or at least no neighbours, because it could become LOUD. It takes time and experience of mike a good amp and even microphones expensive (several). Result depends on the acoustics of the room more than you think.

  Another way here, is to get/build an isolation area around your amp, which will be a kind of micro studio for it, allowing you to play hard and with a good tone, but in a more controlled environment. Many advantages for this make. Unfortunately, the expense can also be 'pro' - but I don't know there are DIY solutions.

  2. record of the amp 'dry' via either its line (send FX will also) or use a ' soaking power allowing you to put the amp (some sounds so much better AMPS), but with a low volume in the room. You can connect the device of soaking directly, or give the speaker the "tame" signal and mike the amp without disturbing the neighbors that it now. Good power soaks don't come cheap (?). Dry recording, for example by not using mike, often sounds like this: dry. It depends on your style of music, but an electric guitar should probably be considered an acoustic instrument. Instead of a diaphragm in wood, it has a speaker. The sound, often, we want to achieve is an amp of good sounding in a good room, which is an acoustic sound. You simply cannot get to an exit row or direct to a soaking of output power (not president). He needs treatment.

  3 use a program like GuitarRig, Amplitube etc. No installation required, regardless of the size of the room and acoustic sound (except that the acoustics of the room always will affect listening!) or mike. The software simulates the amps, effects and even mic configurations; added the "airplane" that you will not get a direct connection. Once again, according to your style. If I were Bill Frisell or Jim Hall, i.e. anyone with an as most of their music very "naked" guitar sound, I probably does (but these guys have access to the great engineers too...), but in a pop idom / mixed rock with other instruments and certainly to do demos, that's actually what I would recommend. Especially for us space challenged who have neighbors and an infinite time either. No, you will not look like 'all the world'; It's garbage in French - garbage out as always (many are disappointed by the present, but some are happy, it is always the case)

  All you need is a sound card with an instrument of entry. If you have a * good * sound card already who is not entered instrument, you can consider a DI box. Otherwise I'd say it's redundant.

• Outsourced nOOb Question ID box

  Currently, we outsource our ID box, at a cost of $300 per month.

  The area ID is OpenBSD, which I know a little. My questions are, the price seems high, and what should I know to set up my own box IDS?

  TIA!

  You don't need to know much about the underlying instrument used effectively operating system the ID.

  The knowledge needed to use the ID are related to the treatment of the events of signatures, tuning the IDS in your environment and in response to significant events indicated by the sensor.

  A GUI is anchored in the ID that allows the Web in the sensor to manage. An event viewer is available for download for to look you at events like the sensor reports to them.

  In the city, I have work, demonstrate us the sensors every two weeks to our interested customers. You can contact your local Cisco Office and see if there will be demos in the coming months, you could attend to familiarize yourself with the device.

  Hope this helps,

  Peter

• Noob question, youtube

  Hi im a noob to photoshop etc, and has recently started a YouTube channel for downloading music.

  Ive seen several channels that resemble the type of this http:/// www.youtube.com/watch?v=Apc4XT8xUvghttps://www.youtube.com/watch?v=Apc4XT8xUvg

  Does anyone how to make a video like this with snowflakes etc. and what program to use?

  Sorry if this is the wrong forum to ask this question in.

  I'm guessing that Adobe After Effects (perhaps with a plug-in):

  Video effects, Visual effects software | Download the free trial version Adobe after effects CC

  Can pick up a quick getaway in the After Effects forum and see what they say here as well.

• vCenter Licensing Question

  We are currently conducting environment vSphere with vCenter Server 5 5 (using the VCSA).  My vSphere, ESXi licensing have the right to upgrade to vSphere 6, but is not my vCenter license.  After further review, we have seen that the SnS support contact us on our vCenter license had expired in January 2015, so we went ahead and got that renewed back support.  My question is, now that we have renewed the support we may update this license vCenter vCenter license 5 6 or we will have to buy a new license of vCenter 6 new?  I checked my VMware Licensing Portal and this shows that we have supported on vCenter 2018 license, but I don't see any option upgrade to this topic.  Any input would be greatly appreciated.

  Welcome to the community,

  as far as I know all the licenses that are (or were taken over at the time a new version was released) by an active subscription can be upgraded. When you select "Update license keys" in the drop down menu "I want", you should be able to select and upgrade your vCenter Server license.

  André

• Integration of vSphere and vCenter logging Question

  Hello

  A few questions!

  1. VSphere integration with vCenter Server provides all the extra features on just by pulling the newspaper from vCenter through a syslog collector?
  2. Do you see any problem with the help of nxlog or Agent Insight of the newspaper to pull the following logs listed below, even if they are written not enough constantly? (Such as file permissions or use errors)
  3. There be any question, removing the vcenter/host integration in newspaper Insight and use a separate method of sending newspapers to the Insight Journal?
  4. How the Agent Insight of the newspaper would handle files with dynamic names? I would say just journal catalina.*.log?
     1. VMware KB: Location of the vCenter server log files

        1. vpxd.log

        2. vpxd - profiler .log

        3. vpxd - alert.log

        4. CIM - diag. and vws.log

        5. ls.log

        6. vimtool.log

        7. stats.log

        8. SMS.log

        9. EAM.log

        10. Catalina. < date > .log and localhost. < date > .log

        11. jointool.log

        12. Manager. < date > .log

        13. Home-Manager. < date > .log

            Thanks for any help!

            -Patrick

  1 vSphere vCenter Server integration is only to shoot events, tasks and alarms of the vCenter Server database and ingesting as if they were log messages

  2. everything should be good - use the agent Log Insight

  3. currently no - notice the currently

  4. Yes, the agent Log Insight supports filename wildcards (* and?) -See collecting events to a log file

• New performance counters available in vCenter since ESXi 5?

  Hi guys,.

  Just noticed that the very useful counter co Stop seems to be available in the performance for a tab machine virtual hosts on an ESXi5.1 update 1 box. This is new since ESX(I) 4? Very convenient!

  According to this VMware vSphere 5.1 meter stop co vCenter introduced in v5.0... The meter is available in 4.1 but esxtop only... not in vCenter...

  / Rubeck

• vCenter version question

  Hello

  I have 1 host running ESXi 4.1 build 260247.

  Earlier, we add a 2nd machine ESXi for HA.  This means that I have to also run vCenter.  I have vCenter 4.1 build 259021 installed on a computer and have added that the new host to the HA cluster.  It seems to work so far...

  We will not go to vSphere 5 for awhile.

  Questions: Should I run the last vCenter 4.1 U2?  The old machines ESXi 4.1 works perfectly with the latest vCenter 4.1 U2?

  If I upgrade the hosts ESXi 4.1 4.1 U2, guests VMware tools will need to be upgraded?

  Thank you!

  curtcorwin wrote:

  Hello

  I have 1 host running ESXi 4.1 build 260247.

  Earlier, we add a 2nd machine ESXi for HA.  This means that I have to also run vCenter.  I have vCenter 4.1 build 259021 installed on a computer and have added that the new host to the HA cluster.  It seems to work so far...

  We will not go to vSphere 5 for awhile.

  Questions: Should I run the last vCenter 4.1 U2?

  Bug fixes are likely - good

  The old machines ESXi 4.1 works perfectly with the latest vCenter 4.1 U2?

  Yes!

  If I upgrade the hosts ESXi 4.1 4.1 U2, guests VMware tools will need to be upgraded?

  It would be nice, but is not an absolute requirement.  You can take your time and make it when convinient.

  Thank you!

• VCenter Converter - Question on the process

  Thanks, I'm out here with you nice people, I am currently a migration old (but loyal and faithful) Windows Advanced Server 2000 to my ESXi server.

  My question is what is happening during the conversion of the VCenter Converter running. I'm a convert about 100 GB of things. The estimated time of competition is about 17 hours.

  There is a drive C: and D: drive drive E:. When I do this for a client, I wonder if there will be data loss. More precisely, suppose that a service is running on the C: collecting data. In my case, it's true. I have a product called Spamlion goes filters email before it goes to my Exchange Server.

  Once the conversion of drive C: is complete and, I guess, the Spamlion service is restarted by the converter, not emails that come in this server * not * be copied onto the hard I create? More simply, if I had to save some .pdf on the C: drive after the C: drive has been converted would not these data * not * do more to the hard?

  When I migrate a company of Small Business Server to server ESXi will be I have to stop incoming messages and access to the server during the conversion to avoid users to save data to the SBS until I bring the ESXi virtual machine?

  Thank you very much!

  Mike Gallery

  Converter does NOT support the consintency restart or application services.

  This case, you have to malleable.

  The right way is stop all services before you start the conversion, and then start the virtual machine (reconfigure to fixed IP and remove the old drivers), then check if the services start again.

  To convert an SBS or an AD domain controller you must stop the AD, so away 2003 or earlier, you must run in AD restore mode.

  André

• Foundation vCenter license question

  There are four servers, that we want to use as a vSphere ESXi hosts.

  VMWare vSphere Advanced Acceleration Kit (6 CPU) license includes vCenter Foundation licenses which supports up to three ESX host. What happens if we add a fourth ESXi host (if that's even possible)?

  Would it always be included with the other three, except with features like 'HA/VMotion"unavailable etc.?

  Silly question, but both of my dealers give me different answers.

  Thank you

  you get an error something like "insufficient license to...." "When you try to add the host fourth to your inventory of Foundation.

• Totally new with noob questions

  OK so im totally new to developing with Flex. My company uses flex to create RIA that work to read and write with SalesForce CRM. I use the salesforce toolkit and have an understanding of how everything works great base. what im trying to do is take the data which are entered in a text box and who present for salesforce. Currently, the first name, name and phone number are in the code. have created text boxes, I don't know how to take the value that is entered in one and make that equal to the value of its corresponding field.

  like I said... total noob

  If you are in ActionScript. FirstName = firstName.text should be fine, but in MXML and sometimes in ActionScript, you may need this:

  VAC. FirstName = "{firstName.text}.

  If this post has answered your question or helped, please mark it as such.

• understanding scale noob questions limited.

  I wanted to convert a whole range of-1000 and + 1000 to 0 and 255 how im a complete noob.

  Thank you.

  You add and multiply.  Add 1000 to get your shift to the right place.  You now have a range of 0 to 2000.  Now multiply by 255/2000 (I let you do the reduction).