Noob question, youtube

Similar Questions

• Noob question: Playbooks all have the same performance?

  I know... noob question. I am to complete my first game PlayBook and before I submit the app store I wanted to make sure that hardware performance will be the same on all the playbook or will it be something because of the performance issues on a per-device basis? I hope that this will be similar to a console where you can expect stable performance. THX.

  All devices (currently) work the same in the same conditions.

  That does not mean, however, that you can treat it as a console.  A console runs only a game and nothing else (in general).

  The PlayBook can run multiple applications, and among other things, a user can 'Behavior of the Application' setting configuration Mode Showcase, default, or standby, what determines if your application runs or stops when it is idle.  If they are in window mode, they may have other things at the same time.

  To a first approximation, however, "even in the world" is probably correct, for now.  Don't forget there will be different tablets in the future, with specification different but compatible with your app... not quite like a console there where many games is basically orphaned (or requires a port) when a new generation comes out.

• Noob question: autonomous AIR .bar files?

  Sorry for the noob question, yet to learn these things from the air. When we create a .bar file, it is the only file position, does it include the runtime air, flash, etc, etc, or is it always require an accumulation of air / flash runtimes on the device? THX.

  The .bar file does not include the time of execution because the runtime is already preinstalled on the Playbook.

  Air is really integrated into the PlayBook so you don see the difference between a native app or an Air application.

• NooB question: Cup titles and a schedule of transfer

  Let's say I have tons of tracks.  In the Middle, I find I want to firm up a few seconds of footage.  I can cut, or delete the clip, but I still have to select all the following clips and make sure they move upward.  There must be a smarter way of removing a few seconds of footage and moving upward?

  Sorry for the noob question, I searched on google and didn't know what to look for.  I am open for more information that can help me to tighten my research thus.  See you soon.

  The answer will probably depend on more factors:

  Are there in your Timeline, Clips above the area of the Clip you want to Trim?

  What you want to happen to those?

  Are you only concerned to "strengthen" the Clips on the same video track where you cut, or Clips on other tracks video too?

  It is likely that the tool Edit Ripple, or Rt-click and Ripple delete, will do what you want, but who can count on the other Clips on other tracks, and video that you need.

  Good luck and please let us know a little more.

  Hunt

• D.I. box noob question

  Hi all

  Sorry for the noob question, but I need something clear up if possible. I was about to buy a box for injection and then had a query on them, and if I actually could benefit in this scenario...

  
  Fig 1. is how I currently record.

  Fig 2. is how I would do it with di direct box

  

  My question is... in this configuration, the d.i. box would make a difference to the signal? or he would only make a difference if I was going to live guitar to box, the sound card?

  Thank you for all your help.

  In my opinion you have basically three alternatives for the recording of the guitar:

  1. get an amp excellent sound, recording with a microphone, or more, in a room of good survey.

  Challenges: you'll probably need a studio proper, or at least no neighbours, because it could become LOUD. It takes time and experience of mike a good amp and even microphones expensive (several). Result depends on the acoustics of the room more than you think.

  Another way here, is to get/build an isolation area around your amp, which will be a kind of micro studio for it, allowing you to play hard and with a good tone, but in a more controlled environment. Many advantages for this make. Unfortunately, the expense can also be 'pro' - but I don't know there are DIY solutions.

  2. record of the amp 'dry' via either its line (send FX will also) or use a ' soaking power allowing you to put the amp (some sounds so much better AMPS), but with a low volume in the room. You can connect the device of soaking directly, or give the speaker the "tame" signal and mike the amp without disturbing the neighbors that it now. Good power soaks don't come cheap (?). Dry recording, for example by not using mike, often sounds like this: dry. It depends on your style of music, but an electric guitar should probably be considered an acoustic instrument. Instead of a diaphragm in wood, it has a speaker. The sound, often, we want to achieve is an amp of good sounding in a good room, which is an acoustic sound. You simply cannot get to an exit row or direct to a soaking of output power (not president). He needs treatment.

  3 use a program like GuitarRig, Amplitube etc. No installation required, regardless of the size of the room and acoustic sound (except that the acoustics of the room always will affect listening!) or mike. The software simulates the amps, effects and even mic configurations; added the "airplane" that you will not get a direct connection. Once again, according to your style. If I were Bill Frisell or Jim Hall, i.e. anyone with an as most of their music very "naked" guitar sound, I probably does (but these guys have access to the great engineers too...), but in a pop idom / mixed rock with other instruments and certainly to do demos, that's actually what I would recommend. Especially for us space challenged who have neighbors and an infinite time either. No, you will not look like 'all the world'; It's garbage in French - garbage out as always (many are disappointed by the present, but some are happy, it is always the case)

  All you need is a sound card with an instrument of entry. If you have a * good * sound card already who is not entered instrument, you can consider a DI box. Otherwise I'd say it's redundant.

• Totally new with noob questions

  OK so im totally new to developing with Flex. My company uses flex to create RIA that work to read and write with SalesForce CRM. I use the salesforce toolkit and have an understanding of how everything works great base. what im trying to do is take the data which are entered in a text box and who present for salesforce. Currently, the first name, name and phone number are in the code. have created text boxes, I don't know how to take the value that is entered in one and make that equal to the value of its corresponding field.

  like I said... total noob

  If you are in ActionScript. FirstName = firstName.text should be fine, but in MXML and sometimes in ActionScript, you may need this:

  VAC. FirstName = "{firstName.text}.

  If this post has answered your question or helped, please mark it as such.

• understanding scale noob questions limited.

  I wanted to convert a whole range of-1000 and + 1000 to 0 and 255 how im a complete noob.

  Thank you.

  You add and multiply.  Add 1000 to get your shift to the right place.  You now have a range of 0 to 2000.  Now multiply by 255/2000 (I let you do the reduction).

• Assistant of the output instrument always 0.0 without input series, where's the trigger? -Noob question

  Guys keep with me, I'm another PLCs and VB/C programmer, there are still the old paradigms of locking my head.

  See attached vi. After that I disconnected the entry in the series, the wizard exits still instrument 0,0 to its terminal at regular intervals about 1 hz. Now how does the wizard output always inst 0.0 without a trigger entry series? There must be a timer somewhere... but I searched everywhere there is no timer, including by opening the front panel of the wizard of the instrument. I watch the whole bulk of the loop and block VISA etc, there is no synchronization setting.

  So my question is, if there is no entry of series by using the instrument, which is the parameter object that triggers the instrument Wizard still out 0,0 at regular intervals? Where the object/setting?

  

  Thanks in advance

  Great big thank you! I can sleep tonight! Muahahahahahha!

• EA4500 + ADSL router: networking noob question

  Then... I'm not sure of the right words to use, but this is the case I would appreciate the help. I tried to figure out how to survive myself, but I find it a little confusing - however, if you think I just need a networking 101 do not hesitate to send me to appropriate information sources (I've tried a few, as I say, but I have not yet found a place where my situation fits!).

  Quick back story: I have a cheap TalkTalk ADSl router (D-Link 3680) where the Wireless does not properly in the House. So I just got a DSL EA4500 router for better strength/speed/compliance wireless - you'll just have to forgive me for not having an ADSL router, which I realize may have been a simpler solution!

  First of all, I put the (D-Link of TalkTalk 3680) ADSL router in Bridge mode and got this and the EA4500 work together which was great as it goes. However, I would be hard...

  I have a tower PC and wish to receive wired ethernet network. While I know in the set - up above I can run a cable from the 3680 to the EA4500 and then another cable to the PC because the PC is closer to the telephone (with the ADSL router) Jack, physically it seems wiser, if I take the PC of the 3680 ethernet connection (along with a second cable 3680 to EA4500 connection for the wireless). It may or may not be relevant that the 3680 is a Fast Ethernet output, as is the network PC card (i.e. are not Gigabit).

  I don't know (a) whether the above configuration is possible and if yes, how, or (b) the question whether in terms of networking, it is best to cable to the EA4500 computer (even if this will create a longer path to the PC and the wiring more).

  Meaning, and if yes maybe someone could give me also a term for what I'm doing?

  Help gratefully received! Garreth

  3680 port LAN (bridge) => EA4500 Port WAN (router)-online PC peripherals and wireless

  It's the best configuration and nothing should be connected to the 3680 other than the EA4500.

  The physical location of the electronics is not important, unless you can not run cable or wireless signal is low.

• BlackBerry Smartphones an another Noob Question (re mp3)

  Can I buy MP3s from Amazon or somewhere like that and put them on my Blackberry?  I'm confused whether the BB has a mp3 player.  Probably a stupid question, but thanks.

  Hello!

  Here's a knockout who deals with BB-compatible media formats:

  http://www.BlackBerry.com/BTSC/search.do?cmd=displayKC&docType=kc&externalId=KB05482

  Indeed, the BB has a player - it should be the icon on your homescreen called "Media".

  See you soon!

• Outsourced nOOb Question ID box

  Currently, we outsource our ID box, at a cost of $300 per month.

  The area ID is OpenBSD, which I know a little. My questions are, the price seems high, and what should I know to set up my own box IDS?

  TIA!

  You don't need to know much about the underlying instrument used effectively operating system the ID.

  The knowledge needed to use the ID are related to the treatment of the events of signatures, tuning the IDS in your environment and in response to significant events indicated by the sensor.

  A GUI is anchored in the ID that allows the Web in the sensor to manage. An event viewer is available for download for to look you at events like the sensor reports to them.

  In the city, I have work, demonstrate us the sensors every two weeks to our interested customers. You can contact your local Cisco Office and see if there will be demos in the coming months, you could attend to familiarize yourself with the device.

  Hope this helps,

  Peter

• noobie question about 2 guest OS and virtual HARD disk 1

  I want to know if this is possible and what possible impact, it may cause, as appropriate.

  Set up:

  2 Guest OS in VMware, both using different drives virtual of course since you cannot use the same operating system file invited on multiple instances.

  Then I set up another virtual HARD drive, lets call it SharedMyDrive, and this HARD drive will contain all my data and programs.

  Can I do both guest OS use this SharedMyDrive? (Should be possible with the options of parameters allowing to add more hard drives) but then my question is; How are the data in this manipulated shared HARD drive?

  If I turn both the OS and both of them make changes in SharedMyDrive, it's just a matter of who makes changes that records everything first? It would cause windows errors such as messages "this file is already in use" if I try to delete a file on OS1, but its use in OS2?

  In order to use shared storage, you need an operating system that is aware of this and handle it correctly. ESXi is an example of such operating system. Access to the same storage operating system that cannot manage shared access causes data corruption.

  André

• Noob question - selectedLayers

  Hi guys,.

  I wrote a simple script using selectedLayers to get the properties I wanted. I just realized that, so that selectedLayers to work, he seemed to think I first select layers, then run the script.

  It is abit problematic, given the use of script later. Is there a better way to point to the selection of the layer or some kind of a constant update on the selectedLayers?

  Thank you very much

  Desforges

  I see. Read the original question gives the impression that you think this selectedLayers is not updated in real time.

  It is actually updated in real time, and this is what might cause you a problem:

  Because adding a new layer to a model disables all in this model and selects the new layer.

  ===> If you ask comp.selectedLayers even once it does not contain the original selection but only the extra layer.

  If you need to store the array of selected layers before doing anything (var a = myComp.selectedLayers). Then make your changes (add NULL values, rename, set expressions) referring to the table 'a', not myComp.selectedLayers.

  Not 100% sure that it resolves your problem, give it a try.

  Xavier.

• CS6 Noob question

  So, this may be a silly question.  Photoshop CS6 does not come with the original download creative cloud for $9.99 per month correct? Must buy separately?

  CS6 isn't a commodity is. You purchase an activation code to make it work. CC of Photoshop is the new Photoshop and a subscription; pay the tax, or it will cease to work...

  Benjamin

• Various noob questions, tables

  Hey all,.

  This isn't really an issue, but as I am just learning AS3 as best as I can, I thought I'd use understand you smart people to help me better things.

  I'm in book of Gary Rosenzweig (good info, but very difficult for me to grasp the logic and keep track of all the variables) and has recently created the "Deduction". It works, but I don't feel that everything has been explained as well as it could have been.

  1. could someone maybe break what happens at the hearing "because" for tables are created?

  private var currentRow:Array;

  //

  currentRow = new Array();

  for (var i: uint = 0; i < numPegs; i ++) {}

  var newPeg:Peg_mc = new Peg_mc();

  newPeg.x = i * pegSpacing + horizOffset;

  newPeg.y = turnNum * rowSpacing + vertOffset;

  newPeg.gotoAndStop (1);

  newPeg.buttonMode = true;

  newPeg.pegNum = i;

  newPeg.addEventListener (MouseEvent.CLICK, clickPeg);

  newPeg.setChildIndex (newPeg, 5); ASK QUESTIONS ABOUT AS3 FORUM

  addChild (newPeg);

  allDisplayObjects.push (newPeg);

  records pegs as an array of objects

  currentRow.push ({peg: newPeg, color: 0});

  }

  Is something like this: you want a new table, and 'for' is used to help determine the number of objects or "slots" need to be created for this table? ( I use the variable 'creation' because it's just practice?) Below, I start at 0, is assumed to be 1 less than the number and needs 1 added to the amount (a constant) numPegs i (++), until it is equal to i < numPegs...

  something like that?

  2 I vaguely remember the book mentioning that tables can create content ' on the go ' or 'dynamic' - for example, currentRow.push ({peg: newPeg, color: 0}); creates the 'peg' and 'color' attributes without needing a definition for them earlier in the script.

  Any help would be appreciated. Just realize that I'll probably ask a LOT more questions in the coming weeks. (I am creating a game of my own).

  The 'i' used in the loop is commonly used as a variable name for a loop counter.  In another life/language "n" used to be the most popular choice.  It may be named any unreserved name you like.  With the help of 'i' is short and sweet.

  Tables begin at an index of 0, which is why the 'I' start at 0.  numPegs dictates ankles how you want to create.  As I starts at 0, as soon as I is 1 less than numPegs, the work is done.

  Tables cannot create content dynamically.  They can store references to the dynamically created content, but cannot create this content.  The content had to be created elsewhere.