Avast works no-error 'end point mapper.

Similar Questions

• "There is no end point for the end point mapper.

  Summary of the issue
  Other issues of Windows Live family safety

  What version of Windows Live Family Safety do you use?
  Version 2011 (15.4.3538.513)
  Choose your operating system version:
  Windows 7

  Additional details
  Whenever I have try and configure the accounts of FS, I get an error that says: "there is no end point to the end point mapper.  I tried to uninstall the parental control and re - install the latest version several times and I get the same error.  I created several new accounts and tried to tie but still the same error.

  Any help?

  I had the same problem and the error you mentioned above... Has been frustrating me. After working through the questions Tech above, I discovered that it was related to basic and Windows Firewall filtering engine.

  Check if your Windows Firewall is working properly, and if you can make changes. If you get an error code when you try to change your firewall settings, which could be what it is.

  I followed this to correct the BFE and Windows Firewall it retries then parental control and he went through with NO PROBLEMS of...

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-Security/Windows-Firewall-cant-change-some-of-your-settings/514d78fb-39e9-47b1-B561-bc49cbdad904

  Hope this works for you as well...

• question on pdc's end point mapper

  I have a problem with the domain controller or when you try to replicate to the new Member serevr which is a backup domain controller it fails and says end point mapper isue? any help would be greatly appreciated?

  Thank you

  j

  Hello J,

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for Windows Server on TechNet. Please ask your question in the Forums in TechNet Windows Server.

• RPC end point Mapper is missing from my computer

  How to re-install RPC end point mapper?

  Nancy

  Press the Windows key and the R key

  in the Find box type services.msc

  In the list of services find the RPC end point mapper

  It must be set to automatic and must be started if it is not started

  Start it

  If it is not set to automatic

  Highlight the RPC end Point Mapper and right click, select Properties

  Change the Startup Type to automatic

  Click on apply and OK

• Update my OS Vista Home Premium to Windows 7 restore my missing file of the Windows Installer Service (and perhaps my RPC end point mapper file)?

  Iolo System Mechanic deep cleaning has totally deleted my Windows Installer Service folder (and perhaps my RPC end point mapper file) on my Vista Home Premium PC. I looked into MSCONFIG and they are gone!  It has been too long to do a system restore or other functions of the round trip. Q: if I buy the Windows 7 upgrade, it also installs?  It will make Windows Installer service (and RPC end point Mapper) reappear?  If not, how to get support from Microsoft?  I already tried all 4 methods in article ID 2642495 re: find the Windows Installer service.  I have now 10 MS Important that cannot install updates because missing the file of the Windows Installer service.  Personal support of Iolo System Mechanic were NO help.  Thanks in advance.

  Hello

  What service pack is isntalled with Windows Vista?

  Method 1:

  Check out the link and follow the steps.

  Windows Installer 4.5 is available

  http://support.Microsoft.com/kb/942288

  Method 2:

  If you plan to buy win7 you can check the following items.

  Run Upgrade Advisor before upgrading Vista to Windows 7. Check out the link.
  Windows 7 Upgrade Advisor
  http://Windows.Microsoft.com/en-us/Windows/downloads/Upgrade-Advisor

  Method 3:
  Check out the link and follow the steps.
  Upgrade Windows Vista to Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/help/upgrading-from-Windows-Vista-to-Windows-7
  You can also check:
  Upgrade Windows Vista to Windows 7 (custom installation)
  http://Windows.Microsoft.com/en-us/Windows7/help/upgrading-from-Windows-Vista-to-Windows-7-custom

• Error during the initial install: there is no end point for more available from the endpoint mapper.

  Summary of the issue
  Other issues of Windows Live family safety

  What version of Windows Live Family Safety do you use?
  Version 2011 (15.4.3538.513)
  Choose your operating system version:
  Windows 7

  Additional details
  While you select "Accounts of Windows I want to monitor on this computer" it shows the loading for a long time then popus symbol with:

  Windows Live Family Saftey modal window popup:

  "There is no end point for more available from the endpoint mapper."

  800706 9 error code

  Any ideas?

  I had the same problem and the error you mentioned above... Has been frustrating me. After much research I found out she was related to the basic and Windows Firewall filtering engine.

  Check if your Windows Firewall is working properly, and if you can make changes. If you get an error code when you try to change your firewall settings, which could be what it is.

  I followed this to correct the BFE and Windows Firewall it retries then parental control and he went through with NO PROBLEMS of...

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-Security/Windows-Firewall-cant-change-some-of-your-settings/514d78fb-39e9-47b1-B561-bc49cbdad904

  Hope this works for you as well...

• An error occurred when trying to share Share_OD. There is no end point for more available from the endpoint mapper.

  I wanted a user to add a group named "OD" the client Desktop Machine and another thing is that OU is created named OD. But an error that "an error has occurred all trying to share Share_OD. There is no end point for most the endpoint mapper. »

  Hi Laurent,.

  This request is outside the scope of this forum. I suggest you to send this request in the Microsoft TechNet forum for better support.

  https://social.technet.Microsoft.com/forums/en-us/home

• An error occurred when trying to share < folder name >. There is no end point for more available from the endpoint mapper. The shared resource was not created at this time

  Original title: sharing folder error

  How to solve this error message when I am trying to share a folder: "an error has occurred when trying to share . There is no end point for more available from the endpoint mapper. The shared resource was not created at this time. »

  Hello

  Were there any changes made on the computer before the show?

  I suggest to see the link and try to run the Troubleshooter:

  Share files with anyone

  http://Windows.Microsoft.com/en-us/Windows7/share-files-with-someone

  See also:

  File sharing essentials

  http://Windows.Microsoft.com/en-us/Windows7/file-sharing-essentials

• There is no end point for more available from the endpoint mapper

  My wife is currently running Windows 7 Home Premium.  Trying to create a share gives the following error: "year error occurred while trying to share share name."  There is no end point for most the endpoint mapper. "It's a peer-to-peer network, the other computers running Windows 7 Professional.  No service is disabled or failing.  Any ideas? »

  This could be caused by the procedure call Locator service remote does not. See http://answers.microsoft.com/en-us/windows/forum/windows_7-performance/error-1753-there-are-no-more-endpoints-available/de6f9381-fea6-4bee-b646-b06b81f75d19 for more information.

  I hope this helps.

• Customer DRM batch throw no end point for listening error

  Hi Experts,

  I'm doing a DRM export to the file using batch processing utility. I use the following script:

  call C:\Oracle_OLD\Middleware\EPMSystem11R1\products\DataRelationshipManagement\client\batch-client\drm-batch-client.exe/op = export/u = username/PW = password/URL =net. "" TCP://localhost: 5211, Oracle, Drm, ProcessManager /log="D:\DRM_Batch\LogFile.log ' /xtype = Export /xname ="Export_Name"/outfile="D:\DRM_Batch\Test_Export.txt "/cver ="Version1"/pver ="Version1.

  When I run the above script, batch DRM client starts but I get the following error in the log file:

  06/08/2015-06:45:29 - * start Oracle DRM Batch Client *.

  06/08/2015 06:45:29 - = > error: initialization error: there is no end point for listening to net. TCP://localhost: 5211/Oracle/Drm/engine/SessionMgr that could accept the message. This is often caused by a wrong address or SOAP action. See InnerException, if any, for more details.

  06/08/2015-06:45:29 - * stop Oracle DRM Batch Client *.

  What I noticed, the url in the error message is different from the url that I use in the script. I think that due to this error that the export with the batch utility is a failure. Help, please.

  Thank you and best regards,

  Naveen.

  Hello

  Found the problem that caused this error. The active batch DRM client was somewhere else in the server. I tried to call the former client of lot.

  See you soon,.

  Naveen.

• Error URL - configuration control in Adobe LC folder end point

  I try to configure the control in Adobe LC folder end point and it gives me below error

  Invalid url \\server1\PDFLiveCycleFolder. Please check for invalid file name characters in the url.

  Same path is accessible directly from windows explore. What could be the reason?

  If you use the LiveCycle turnkey it runs under a system account and probably doesn't have access to the share.  The service runs under the account must have rights to the share.

• Shutdown problem reference VI in nested secondary, causing the encountered error 'end of file'.

  Hello

  I'm relatively new to LabVIEW using LabVIEW 8.0 and am having a strange problem.  My program is such that I have a front panel (A), which opens a secondary (B) by a remote control.  This secondary (B) has a button that, when pressed, runs subvi C AND displays a subgroup of experts containing graphical real-time C.vi.  'C', my code uses a reading of file extent express VI to read a text file in a table that is essential to the vi and in the iterations unique VI there is no problem whatsoever, HOWEVER if the C.vi is not properly closed and he's trying to run again, you receive an "end of file" error encountered.  When I run just B.vi and C.vi access like that, I coded "close after call ' and wired this reference to a narrow File.vi VI.  It works as I can repeatedly run C.vi, and no error occurs. However, when I start at A.i and access the secondary B.vi C.vi, I can run successfully the first time, but if I try to run the second time, I get the error "end of file encountered.  I really don't know what the right course of action here is B-> C works fine, but A-> B-> C is not working even if A is not having a single reference to C.vi whatsoever.

  Thank you for your time.

  Well, it was a bit confusing to read, but my guess is that the file pointer is remaining at the end of the file if a kind of close file does not correctly when B is executed inside the A. You said when he is not stopped correctly in this case, then all bets are off if the file is not closed. My suggestion is to ensure the folder is closed correctly (make sure you're not abandonment of the VI, but instead they sent a release message) and if you are not reading files measure but rather use the IO file screws, there is a VI to set the file position. You can set it to 'start' each time before play you.

  It's just a guess, you can post your VI if you can.

• No sound - "either Windows Audio and Windows Audio services end Point Builder is not running."

  original title: no sound - Fix he said "either Windows Audio and Windows Audio services end Point Builder is not running."  What should do?

  When I ran Microsoft Fix it for audio, it says that it is unable to solve the problem.  The message was "two windows audio and Windows Audio end Point generator services must run for audio works correctly." At least one of these services is not running. "What should I do now?

  Content in double wire-
  "When I try to use anything related audioi on my computer (volume of the speaker, open iTunes, watch a video), a box appears that reads,"c\Windows\System32\MMDevApi.dll is not designed to run on Windows or it contains an error. " Try to install the program by using the original installation media or contact your system administrator or support software provider. "The mystery is that I have nothing to my computer to ask for that. I have not installed anything new or change the settings. It just started happening. Any advice? »

  Hello

  1. are you able to hear the sound after the error message?

  2. you have an an external sound card or internal, installed on the computer?

  Method 1:

  I suggest you to follow the steps and check.

  (a) click Start

  (b) type services.msc in the search box, and then press enter.

  (c) scroll down to Windows Audio and Windows Audio endpoint builder of Point

  (d) both should be started and set to automatic if one or both are arrested.

  (e) click the name to select it.

  (f) click on restart the service at the top left.

  (g) repeat for both if necessary. If some are not set to automatic, and then double-click the name and on the drop-down list to set the startup type to automatic and apply and ok your way out.

  Method 2:

  I suggest you to run the automated FIXIT from the link below. You can also follow the other steps and check.

  Tips for solving common audio problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems

  Method 3:

  If you have a sound card, I suggest you uninstall the audio driver from the Device Manager and and then install the latest audio driver version from the sound card manufacturer's website.

  To uninstall the Device Manager sound, proceed as described in the link below.

  Open the Device Manager

  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Device-Manager

  Find the audio driver in the list, do a right click and Uninstall.

  You can also download the drivers from the link below.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 4:

  If the steps do not help, I also suggest you to run a scan of the System File Checker .

  Click on the link mentioned below for more information about the System File Checker analysis

  http://support.Microsoft.com/kb/929833

  Hope this helps and keep us posted.

• visa usb communication in bulk - several end points

  Hi all

  I'll put up a spectrometer optics USB2000 + ocean and want to use visa instead of the dll that I had with the spectrometer (I had a lot of stability problems, moreover, this is not supported by the ocean optics and I won't have to pay for the new version).  I have documentation for the spectrometer and were able to set the integration time and receive ghosts as quickly that the dll has been able to.  But I was not able to read the information of calibration of the spectrometer.  All controls use the transfer block, so I use visa read and write to send/receive.  I think it's the difference between the spectral data and calibration data, that the data comes from different points of termination.   The spectrometer has 4 endpoint addresses (3-PC = IN, 1 PC = OUTSIDE).  The spectral data returns to the first endpoint and the calibration data is on 3rd in.

  Is there a setting I need to change to read from a different end point?  They are all in bulk type according to the documentation.  Any suggestion would be appreciated.

  Thank you!

  Hey gharris,.

  It seems that there is a parameter, you can change by a property node that will change reading from what endpoint. If you use a text-based program, the property, you need to change is VI_ATTR_USB_BULK_IN_PIPE. If you are using LabVIEW, follow these steps:

  First of all, to ask a VISA property on your block diagram node (really any node property works). Then, right-click on the property node and select Select class-> VISA-> / o Session-> USB Raw. This step can be found in attached below EndpointSS1.png and change the property node to a node property USB Raw. Thirdly, left-click on the property and select settings USB-> pipe in bulk. This step can be found in EndpointSS2.png, attached below. It is the property that defines at what endpoint to read from. To change the value of the present, right-click on the property node and select change all to write, which will allow you to connect to an endpoint value.

• How can I open the end point of a letter/police?

  Hi all

  I try to open the end point of a letter using Illustrator. The attached image shows what I'm trying to achieve. I did it by putting a white shape on top of it, but it will not work for a logo to be used on a coloured background, for example. What I need is to be able to open the end without having to add forms, or to be able to merge these forms to the letter, it becomes a path or shape (but I had no chance of being able to find a way to do it).

  I hope I made sense! I'm rather perplexed, so any help would be greatly appreciated.

  Thank you!

  

  Sukipop,

  Forms of letters assuming paths as usual vector illustrations (Type > vectorize or similar) with black outlines, you can:

  (1) select the paths of the letter and the object > path > Outline Stroke.

  (2) ShiftClickDrag with the line tool Segment each location where you want to cut paths/forms (horizontal lines), then object > path > divide objects below, then select the unwanted bits and press DELETE.