AVG firewall

Similar Questions

• Desktop HP Pavilion p6-2380ea: error AVG firewall and cannot install Windows updates

  HP Pavilion p6 2380ea desktop PC

  8.0 Windows improved to 8.1

  After recently making a system restore because my internet security AVG said there is a firewall "error". The system restore has not resolved the situation with the firewall. My PC is also impossible to install updates. There were more than 85 updates recently [932 MB], some have been installed, today I managed to get this up to 75. The point being no update will be that which leaves my system vulnerable to attack or make it unstable? Can someone advise me a solution to get around this PC does not complete a cycle of update?

  I noticed when using the HP Support Assistant, it will be impossible to complete "Download HP PC Diagnostics UEFI" tool.

  The second problem is in the lower part of the tool bar right, that a 'bubble' guard informing them of the low disk space you run lack of disk space on the recovery image [d]

  Click here to see if you can free up space on this drive. Once more can someone advise me a fix?

  Roger271112

  Please check this FAQ of AVG, more will help you

  http://www.Avg.com/EU-en/FAQ.Num-3265

  o fix to your problem, follow these steps:

  (A) check if no program on your computer may be in conflict with AVG Firewall (e.g. another firewall, utility of filtering and monitoring of anti-virus or network), try to remove the conflicting program.

  (B) If no conflicting program is installed, try to reset the configuration of the firewall, it will solve the problems caused by a corrupted configuration:

  To reset the configuration of the firewall:
  1. open the AVG program.
  2. click on the firewall component.
  3. click on refresh configuration.
  4. follow the steps displayed to reset the configuration of your firewall.
  5 restart the computer.

  After the computer restarts, you can be presented with associated applications firewall AVG dialogues you have previously allowed or blocked.

  (C) if the problem persists, perform an AVG repair installation

  To perform a repair of AVG installation:
  1. download the latest installer on this Web page:

  http://www.Avg.com/download.PRD-ISC.line-2012
  (AVG Internet Security 2012)

  2. click on the "Download" button and when asked, choose to save the file.
  3 choose the desktop and then click Save.
  4. double-click on the AVG installation file.
  5. click on repair the installation and follow the instructions in the wizard.
  6. when the installation is complete, restart the computer.

  (D) if the problem persists even after the repair facility, send diagnostic Support AVG from your computer data.

  To send the AVG Support diagnostic data :
  1. download runner.avgdx on this link:
  http://www.AVG.com/filedir/util/support/runner_en.exe

  2. double-click on the file, the AVG Diagnostics tool runs automatically.
  3. Enter your email address and a detailed description of issue in the appropriate boxes.
  4. click on 'results diagnose and send '.

  This will provide AVG with support additional program log files and data, allowing them analyze the problem and find the right solution.

  See you soon

  Mohammed Hamed

• How to remove AVG firewall in windows xp service pack 3

  I use windows xp service pack 3 I removed AVG Antivirus but can not remove the AVG firewall. Firewall AVG is not there to add and remove programs. In the Security Center, it is mentioned that the AVG firewall is running. I would like to remove AVG firewall and install microsoft essentials firewall. I have the essential microsoft antivirus. I used it program uninstall 32-bit with no luck.  An idea

  Hello

  Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up the registry, see the link:

  Back up the registry

  http://support.Microsoft.com/kb/322756

  I suggest you for the link and check if that helps:

  AVG Remover

  http://www.Avg.com/us-en/utilities

  Note: using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

• How to uninstall AVG firewall?

  I'm not able to download an anti virus app for the protection of my PC. How can I uninstall AVG firewall app. This program is not visible anywhere on my PC. Pl help

  Hello

  If you want to remove any AVG application - use "AVG Remover" which you can download on this site:

  http://www.Avg.com/us-en/utilities

  LC

• How to activate the avg firewall on in the 2012 edition

  How to activate the avg firewall on in the 2012 edition, when I scanned with mcafee his watch this avg firewall is disabled. only windows firewall is enabled, then how to activate the avg firewall on. Please, help me to overcome this problem.

  Hello

  Running several programs to firewall on your computer at the same time could cause conflicts. It is best to use a firewall program. If you want to disable the windows firewall, see the following:

  How can I turn on or turn off the firewall in Windows XP Service Pack 2 or later versions?

  You should now be able to activate the avg firewall. If not, contact moy.

  (p.s. to true for antivirus - you should only use 1)

• Cannot access/card Hub via my AVG firewall

  Hello...

  I just got myself a NMH405, but he teases me...

  I have a lot of problems :-), but first I would like to help with is:

  Today, I use AVG Firewall... But I can't access the hub when the AVG firewall is active. When I turn it off, I can. I tried to use the Windows Firewall and then I can access, but I would use my AVG.

  Some who know how to configure my AVG so that it allows me to get in touch with my hub?

  Forward your answers :-)

  By

  Hello

  I don't use AVG, but try to run instructions on the link below maybe that would help. Click on the section 815.

   

  http://www.Avg.com/support#tba6

• Navigation for the AVG firewall Windows XP - network sharing and occasionally be blocked due to uknown UDP outgoing local traffic remotely different ports... Repeatedly enters FilterDevice in the firewall log

  Various involved Ports:
  Local: 257 remotely: 513
  Local: 513 remotely: 6146
  I also saw port 259 and a few others...
  The firewall settings work for various other users, but seem to don't like is not something in my configuration.

  As a member of a domain running Windows XP Pro SP3
  When it blocks the traffic, they are always directed to a remote IP address of a domain within my local network controller. I uninstalled a lot of applications, and made sure I have no services for unix/linux installed.  For a bit, I thought he may have something for security certificates because my computer and user accounts are configured with our local CA... I doubt, however, that is related...

  I also know that my domain name is not the configuration as tight as we would like to see because we had to reduce some of the security settings for old Windows 98 and AS / 400 systems.  So I remember an old key "reg" which might not help:
  Location: HKLM\System\CurrentControlSet\Services\lanmanworkstation
  \Parameters
  Key: enablesecuritysignature
  Initial value: 0
  New value: 1
  This changed seemed to help but then after another it reboot started appearing again...

  Amaranth Hello,

  Thank you for visiting the website of Microsoft Windows Vista Community. The question you have posted is related to the area and would be better suited to the TechNet Forums community. Please visit the link below to find a community that will provide the support you want.

  http://social.technet.Microsoft.com/forums/en-us/categories/

  Keith
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Firefox does not until the AVG firewall disabled

  Says it all...

  I write this on the laptop that works fine!
  Notepad is VAIO, running 8.1 Win

  hope this will help you:

  http://MZL.la/1xKrVHX

• I want to activate the AVG internet security firewall.

  I use Windows 7 Ultimate. I recently installed a genuine copy of AVG internet security 2011, it of OK for the first days, but after a few days, has been disabled firewall AVG & windows firewall is enabled. I tried to move the AVG firewall, but could not succeed. Can someone help me? There could be a problem of setting. Tried a lot, but was of no use.

  Hi SunilSherekar,

  -What happens when you try to activate the AVG firewall? You receive an error message or error code? If Yes, indicate the same.

  When you encounter this problem with AVG, I recommend you post your request in the Support AVG forums to improve assistance in this regard.

• HP Photosmart Plus + firewall AVG v.9.0

  I have a HP Photosmart Plus printer, connected through a Netgear router and a Windows Vista-based computer.

  Without the firewall or Windows Firewall is enabled, the printer works correctly wirelessly.

  But when I use the AVG firewall, it service is blocked and not able to connect to the printer using the HP Solution Center etc. It is not possible to print also.

  I checked the manual of HP to add certain services and ports in the firewall, but it makes no sense

  Always in my AVG firewall, the SVCHost.exe won't port 427.

  I hope someone can help me in detail how to set up the printer to make it work with AVG

  Clear steps are appreciated

  AVG version 9.0.733

  The HP printer IP address: x.x.x.5

  IP address of the computer: x.x.x.17

  The router address: XXX1

  AVG firewall profile: direct connection with Internet

  Game mode is disable

  I can't wait to see your response

  If it is a computer which is always your home using the Netgear router, you don't need a firewall.  Your Netgear router has a built-in hardware firewall.  If it is a notebook that is often not connected to the Netgear, it is another story.

• I ran avg today. Firefox no longer works. I tried your solution via avg interface did not work I have avg 2012. The applications seem different. I need someone to wal

  I ran avg 2012. Now that Firefox is not running. Checked through support got a current download at AVG firewall and trying to remove then add then click on... He says then go to the firefox installation directory (where is that) go to the Mozilla Firefox Firefox\ program and select firefox.exe. etc. That's where I stopped.
  Firewall says firefox authorized. Being a nullgeek I stopped because I don't want to cause more damage. I also tried to download the latest version of Firefox and that nothing resolved.
  I am currently using Internet Explorer.
  I need to walk through it.

  One possible cause is security software (firewall, antivirus) that prevents or limits Firefox or plugin-container process without informing you, possibly after the detection of changes (update) for the Firefox program.

  Delete all rules for Firefox and the plugin-container in the permissions list in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container and the update process.

  See:

  • https://support.Mozilla.org/KB/server+not+found
  • https://support.Mozilla.org/KB/firewalls

  Try a clean reinstall and remove the Firefox program folder before reinstalling a new copy of Firefox.

  • (32-bit Windows) C:\Program Files\Mozilla Firefox\
  • (Windows 64 bit) C:\Program Files (x 86) \Mozilla Firefox\
  • http://KB.mozillazine.org/Installation_directory

  Download a new copy of Firefox and save the file to the desktop.

  • Firefox 18.0.x: http://www.mozilla.org/en-US/firefox/all.html

  Uninstall your current version of Firefox, if possible, the settings in the software security and cleaning of the Windows registry.

  • Do NOT remove the data personal when you uninstall your current version of Firefox, because all profile files will be deleted and you will also lose your personal data such as bookmarks and passwords from other versions of Firefox profiles.

  Delete the program folder Firefox before installing newly downloaded copy of the Firefox installer.

  • It is important to remove the Firefox program folder to delete all the files and make sure that there is no problem with the files that were the remains after uninstallation.
  • http://KB.mozillazine.org/Uninstalling_Firefox

  Your bookmarks and other profile data is stored in the Firefox profile folder and will not be affected by a uninstall and (re) install, but make sure that 'delete personal data' is NOT selected when you uninstall Firefox.

  • http://KB.mozillazine.org/Profile_folder_-_Firefox
  • http://KB.mozillazine.org/Profile_backup
  • http://KB.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

• Error my firewall setting prevents my printer communicates so I can't print. Someone at - he ever heard of this before? Thank you very much.

  I get the error that my firewall setting prevents my printer to communicate so I can't print.  Someone at - he ever heard of this before?  Thank you very much.

  Hi TreetisEbben,

  I had this problem before, but only when you are using the AVG firewall. Usually, you can go to your factory of the printer to see how to unblock specific ports for firewall. Also, to see if this is the problem, temporarily disable your firewall and then try to print. But don't forget to turn it back on once you're done. I hope this helps!

• Hi I have avg 2011 free add. Some components are on but the antivirus and a bit more does not illuminate. I click on update, this is the error I clicked fix says it all, but also failure update?

  I, m Bob a ball came saying that the firewall is disabled, I went in ave and tutned it then I am I at risk because the antvirous is disabled and I did everything I could do to try to turn it on but can't find anywhere that it says to turn under. all this happened when I turned on wall of fire and all the fix get faild. ???

  Hello Bobtopper,

  What is the error message when you try to market the AVG antivirus?
  You turn on the AVG firewall or Windows Firewall?

  If you are having problems with AVG antivirus and you want to uninstall, you can download the Microsoft Security Essentials, which is downloadable for free. Security Essentials provides anti-virus, anti-spyware, anti-malware, etc..
  You can activate the automatic updates if you do not have to worry about updating the software.
  Click here for a link to download Microsoft Security Essentials.
  http://www.Microsoft.com/security_essentials/

  It is not recommended to have more than one antivirus installed because it could cause conflicts in the operating system. If you decide to use Microsoft Security Essentials, you will need to uninstall AVG Antivirus and remove all previous AntiVirus software before installing Security Essentials.

  Please reply back and let us know if we can help you further.

  Thank you

  Marilyn

• Why windows cannot display windows firewall settings

  this happen after I have uninstall Security Live and has replaced it with AVG.

  seem live security insist on product user purchased it thru online using credit card or

  one kind of virus trying to trick me so I took it on.

  Hello

  I suggest you follow these methods and check.

  AVG has built-in firewall. If AVG firewall is enabled by default, the Windows Firewall is disabled for more information on AVG firewall configuration contact AVG:

  http://www.Avg.com/us-en/support
   
  However, try the following steps to access the Windows Firewall.
  Method 1: Re-register shunimpl.dll and check.

  a. click Start - run.

  b. area in open, type cmd and then click OK.

  c. at the command prompt, type the following line and press ENTER:

   

  regsvr32 hnetcfg.dll

   

  If the method above does not work, proceed to the next method.

  Method 2: Install Windows Firewall then check for the issue.

  Follow these steps and check:

  a. Click Start, click Run, type cmd and then click OK.

  b. at the command prompt, type the following command and press ENTER:

  Rundll32 setupapi, InstallHinfSection Ndi-Steelhead 132 %windir%\inf\netrass.inf

  c. restart Windows,

  d. click on start, run, type cmdand then click OK.

  e. at the command prompt, type the following command and press ENTER:

  Netsh firewall reset

  f. Click Start and run, type firewall.cpl, and then press ENTER. In the Windows Firewall dialog box, click on (recommended), and then click OK.

  Also check out this link:

  Could not start the Windows Firewall service in Windows XP SP2:
  http://support.Microsoft.com/kb/920074

  Registry warning: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756

• "Due to a problem not identified, Windows cannot display Windows Firewall settings" when you try to change the Windows Firewall settings.

  Original title: WINDOWS firewall

  I GET A MESSAGE WHEN I TRY TO CHANGE THE WINDOWS FIREWALL SETTINGS - "DUE TO A PROBLEM NOT IDENTIFIED, WINDOWS CANNOT DISPLAY WINDOWS FIREWALL SETTINGS. HOW CAN I SOLVE THIS PROBLEM?

  IN ADDITION, I USE AVG INTERNET SECURITY 2013 AND THAT THE FIREWALL IS ENABLED AND I SEEM TO BE PROTECTED.

  Documentation AVG Internet Security 2013 States:

  Recommendation:

  Generally it is not recommended to use more than one firewall on a single computer. Computer security is not enhanced if you install several firewalls. It is more likely that some conflicts between these two applications will occur. Therefore, we recommend that you use only one firewall on your computer and disable all others, thus eliminating the risk of potential conflicts and problems related to this.

  You can read the AVG documentation by clicking on this link, and see section 6.5:

  http://AA-download.Avg.com/filedir/doc/AVG_Internet_Security/avg_isc_uma_en_2013_06.PDF
  
  So, if you are using AVG firewall, it's wise to just disable the XP firewall for more than a firewall running at the same time can lead to performance problems.  Choose one or the other, but not both.

  I thought installing AVG would understand this by itself, and you know what to do (used to) but I do not want to install AVG to see.