Cannot access/card Hub via my AVG firewall

Similar Questions

• Cannot access the videos via USB more

  Nice day

  I have a HDR-SR10. I can't access the videos via USB more. drive appears blank in windows 8. Videos can be played through the screen of the device. Help, please

  Yes. Tried 2 usb ports with no luck.
  In fact. I downloaded the latest version of PMB and was able to import videos from cam. Once imported, I formatted the drive, then it pops up on the desktop as usual.
  For me, it wa weird experience and have no logical explanation.

• Cannot access my public folder when my firewall is on

  I can't access my public folder when my firewall is turned on. But can access it when my firewall is disabled. I already activated the public folder sharing and file sharing.

  Also, I don't see computers connected to my computer when their firewall is enabled and can see when their firewall is disabled. Why is this?

  You must configure your firewall properly instead of turning market.

  Excellent, comprehensive, but easy to understand article on sharing files/printer under Vista. Contains information about sharing printers and files, and the folders:

  http://TechNet.Microsoft.com/en-us/library/bb727037.aspx

  Configure the firewall on all machines to allow traffic to local area network (LAN) as being approved. With the Windows Firewall, it means which allows file sharing / print on the Exceptions tab normally run the XP Network Setup Wizard will take care of this for these machines. The only "witch hunt", it will turn on the XPSP2 Windows Firewall. If you are not running a third-party firewall or you have an antivirus/security with its own firewall component program, then you're fine.  With a third-party firewall, I usually set up the allocation of LAN with an IP address range. E.g. would be 192.168.1.0 - 192.168.1.254. Obviously you would substitute your correct subnet. Refer to the safety of any third party program or the user forums for how to correctly configure its firewall. Do not run more than one firewall. DON'T STOP FIREWALLS; CONFIGURE THEM CORRECTLY.

  If you would like more information, please provide these details:

  1 levels systems operation/versions/Service Pack of all machines.
  2. name of antivirus/security software used.
  MS - MVP - Elephant Boy computers - don't panic!

• Cannot access remote network via VPN

  Hello

  I'm trying to set up a router vpn access to my office network. The router is connected to the Internet through using pppoe vdsl.
  There is also a public oriented Web server in the office which must be accessible.

  I can access the Web server from the Internet and the vpn connects successfully. I can also ping the LAN Gateway, however, I can't access all the local machines.

  I'm quite puzzled as to why it does not work. Please could someone help.

  The results of tests and the router configuration are listed below. Please let me know if you need additional information.

  Thank you and best regards,
  Simon

  1. routing on the router table
  Router #sh ip route
  Gateway of last resort is ggg.hhh.125.34 to network 0.0.0.0
  xxx.yyy.zzz.0/29 is divided into subnets, subnets 1
  C XXX.yyy.zzz.192 is directly connected, Vlan10
  GGG.hhh.125.0/32 is divided into subnets, subnets 1
  C GGG.HHH.125.34 is directly connected, Dialer0
  172.16.0.0/32 is divided into subnets, subnets 1
  S 172.16.100.50 [1/0] via mmm.nnn.ppp.sss
  S * 0.0.0.0/0 [1/0] via ggg.hhh.125.34

  2. ping PC remotely (172.16.100.50) local GW (172.16.100.1) successful
  > ping 172.16.100.1
  Ping 172.16.100.1 with 32 bytes of data:
  Response to 172.16.100.1: bytes = 32 time = 24ms TTL = 255
  Response to 172.16.100.1: bytes = 32 time = 10ms TTL = 255
  Response to 172.16.100.1: bytes = 32 time = 10ms TTL = 255
  Response to 172.16.100.1: bytes = 32 time = 11ms TTL = 255

  3. ping PC remotely (172.16.100.50) to the local server (172.16.100.10) failure
  > ping 172.16.100.10
  Ping 172.16.100.10 with 32 bytes of data:
  Request timed out.
  Request timed out.
  Request timed out.
  Request timed out.

  4. ping the router to the successful local server
  router #ping 172.16.100.10
  Type to abort escape sequence.
  Send 5, echoes ICMP 100 bytes to 172.16.100.10, wait time is 2 seconds:
  !!!!!
  Success rate is 100 per cent (5/5), round-trip min/avg/max = 1/1/4 ms

  5 see the version
  Cisco IOS software, software of C181X (C181X-ADVIPSERVICESK9-M), Version 12.4 (15) T1, VERSION of the SOFTWARE (fc2)
  ROM: System Bootstrap, Version 12.3 YH6 (8r), RELEASE SOFTWARE (fc1)
  the availability of router is 1 hour, 9 minutes
  System image file is "flash: c181x-advipservicesk9 - mz.124 - 15.T1.bin".
  Cisco 1812-J (MPC8500) processor (revision 0 x 300) with 118784K / 12288K bytes of memory.
  10 FastEthernet interfaces
  1 ISDN basic rate interface
  Configuration register is 0 x 2102

  6. router Config
  AAA authentication login default local
  connection of local AAA VPN authentication.
  AAA authorization exec default local
  local authorization AAA VPN network
  !
  !
  AAA - the id of the joint session
  !
  !
  !
  !
  crypto ISAKMP policy 1
  BA 3des
  preshared authentication
  Group 2
  !
  Configuration group customer isakmp crypto ASI_Group
  key mykey
  DNS aaa.bbb.cccc.ddd
  domain mydomain.com
  pool VPN_Pool
  ACL VPN_ACL
  !
  !
  Crypto ipsec transform-set esp-3des esp-sha-hmac TS1
  !
  crypto dynamic-map 10 DYNMAP
  game of transformation-TS1
  market arriere-route
  !
  !
  list of authentication of VPN client VPN crypto card
  card crypto VPN VPN isakmp authorization list
  crypto map VPN client configuration address respond
  card crypto 10 VPN ipsec-isakmp dynamic DYNMAP
  !
  !
  !
  IP cef
  !
  !
  !
  Authenticated MultiLink bundle-name Panel
  !
  !
  username admin privilege 15 password mypassword
  Archives
  The config log
  hidekeys
  !
  !
  !
  !
  !
  interface FastEthernet0
  WAN description
  no ip address
  no ip redirection
  no ip unreachable
  no ip proxy-arp
  no ip mroute-cache
  automatic duplex
  automatic speed
  PPPoE enable global group
  PPPoE-client dial-pool-number 1
  !
  interface FastEthernet2
  Description Public_LAN_Interface
  switchport access vlan 10
  full duplex
  Speed 100
  !
  FastEthernet6 interface
  Description Private_LAN_Interface
  switchport access vlan 100
  full duplex
  Speed 100
  !
  interface Vlan1
  no ip address
  !
  interface Vlan10
  Public description
  IP address xxx.yyy.zzz.193 255.255.255.248
  no ip redirection
  no ip unreachable
  no ip proxy-arp
  no ip mroute-cache
  !
  interface Vlan100
  172.16.100.1 IP address 255.255.255.0
  no ip redirection
  no ip unreachable
  no ip proxy-arp
  no ip mroute-cache
  !
  interface Dialer0
  IP unnumbered Vlan10
  no ip unreachable
  IP mtu 1452
  IP virtual-reassembly
  encapsulation ppp
  no ip mroute-cache
  Dialer pool 1
  Dialer-Group 1
  Authentication callin PPP chap Protocol
  PPP chap hostname myhostname
  PPP chap password mychappassword
  PPP ipcp dns request accept
  failure to track PPP ipcp
  PPP ipcp address accept
  VPN crypto card
  !
  IP pool local VPN_Pool 172.16.100.50 172.16.100.60
  !
  !
  no ip address of the http server
  no ip http secure server
  !
  VPN_ACL extended IP access list
  IP 172.16.100.0 allow 0.0.0.255 any
  !
  Dialer-list 1 ip protocol allow
  not run cdp
  !
  !

  Simon,

  Basically when you connect through a VPN Client PC routing table is updated automatically as soon as the connection is established. If you do not need to manually add routes. You can check this by doing a "route print" once you are connected.

  Ideally, you need to put your pool of VPN on subnet that does not exist on your physical network, the router would be to route traffic between the IP pool and internal subnet.

  Now, you said that you have a web server with a public IP address that you need to access through the VPN, that host also as a private IP addresses on the 172.16.100.0? If it isn't then the ACL that I proposed should work. If she only has a public IP then your ACL VPN address must have something like

  IP 172.16.100.0 allow 0.0.0.255 192.168.100.0 0.0.0.255

  219.xxx.yyy.192 ip 0.0.0.7 permit 192.168.100.0 0.0.0.255

  Who says the router and the client to encrypt all traffic between the subnets behind your router and your VPN pool.

  I hope this helps.

  Luis Raga

• RV120W - cannot access static IP via VPN devices

  Hello

  I have a RV120W used to provide VPN access to several industrial devices. Some of these devices are assigned via DHCP from the router IP address. Can not do DHCP, so there a self-determined static IP.

  The VPN works well for all devices that are affected intellectual property. However, it does allow me to connect to the device that has a static IP address. I can connect to it very well when I'm on the LAN or WLAN, but it cannot ping via the VPN.

  Help!

  Thank you-

  Bailey

  Hi Bailey, it seems that the static device has no default gateway are entrusted to him.

  -Tom
  Please mark replied messages useful

• Cannot access the readynas via the network of windows 7 since the 65.5 update

  I have a readynas 102 fixed by a switch to a windows 7 computer pro.

  Before the update, to 65.5 I could still access the files on my readynas 102 (name: homedrive) by selecting it under Network > homedrive

  Since the update, it still appears in 'network', but clicking on does not give me access more :-(

  

  I found that I can open the homedrive ready nas using the IP (\\192.***.*.***) in a new window of Solution Explorer. The media unit also works very well to access music. But why can't access through the 'network' - and why he always appears without giving me access...

  I guessed that maybe it's to do with the new credentials of connection (since the change of a name of the EBU to an e-mail address), but how to change it in my windows pc network?

  Any help would be great and simple steps please! Thank you very much.

  Thanks to your inspiration I solved it my changing the password of the network connection of the former username of pre update for the new updated post e-mail deal as username via windows credentials... thank you everyone :-)

• Problems of networking - cannot access other computers via network

  Help, please!  About six months ago, I had Internet from Time Warner.  They provided a wireless router.  I set up the network with my desktop and laptop.  Both computers have XP and two of them access to the wireless network.  Everything worked well.  I was able to print with the laptop through the desktop computer.  I could also access files shared from one to the other.  One day it just stopped working.  I'm guessing after a windows update.  In any case I spent a LOT of time to sift through here looking for answers.  One thing I discovered is there is a lot of those who are experiencing the same thing, but nobody seems to have an answer to the problem.  I found an article that told me to increase the IRP stack size.  I tried and it worked for a few days and then it is right to give me this message, "you might not have permission to use this network resource.  Contact the administrator of this server to find out if you have access permission.  I'm about to lose my mind.  I don't understand how he could have worked for two months and then stops.  The only firewall I run on each one is Windows.  Help, please!

  Jack,

  After typing this long email discuss my problem and I did some internet research and found this post that said they have solved the problem.  He said ' I solved the problem by adding the "Protocol of Transport compatible NWLink IPX/SPX/NetBIOS" to my list of properties of network on every computer on my network.»  I tried it and it worked.  Only problem I've noticed so far is that it takes time to move a folder to.  To back up a folder, he thinks for a minute before moving.  Any thoughts?

  Jerry

• Cannot access programs after message of AVG on malware

  I was watching a TV program on the net and my AVG told was detected malware (sp?) he gave me plenty of clean the file I did and then I had to restart the computer, when it restarted I found that I couldn't open all the programs and icons that normally appear in the bar on the lower right have also disappeared!  When I try to start a program, a box appears asking me to choose the program I want to use to open this program... the only thing that appears in the box is Internet explore!  We cannot open anything for example ' itunes, Word, games... nothing.  Help, please!

  Hello

  Make sure that your system is clean

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  __________________________________________________________________

  read this:

  Restoration. Association of exe in Windows 7/Vista after incorrectly associating it with another program

  http://www.Winhelponline.com/blog/restore-exe-file-Asso-Windows-7-Vista-incorrectly-associated/

  __________________________________________________________________

  also run the sfc/scannow command.

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally madeprograms,Accessories, right-clickguest, and then clickrun as administrator. If you are prompted for an administrator password or a confirmation, type the password, or clickallow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions

  How to analyze the entries in the log file generating the program Checker (SFC.exe) resources of Microsoft Windows in Windows Vista

  http://support.Microsoft.com/kb/928228#appliesTo

  If SFC detects the main problems it can't fix you may need to borrow a Microsoft dvd vista not an acer, HP etc. recovery disk and do a repair installation

  read the below tutorial on how to perform a repair installation

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

• Cannot access the internet via Blackberry 10 Simulator...

  In fact, I'm in the workplace...

  There are a lot of restrictions are there... every time that I'm trying to access internet from the blackberry browser 10 Simulator...

  He rasises an error which is unavailable to the network (proxy is enabled).

  When I connect the pc even to open the network while I am able to browse internet Simulator itself...

  then I came to know that the proxy server is not bypassing the url generated from the Simulator...

  can someone suggest a good answer to work with...

  10 BlackBerry Simulator does not support connections via a proxy server.  This looks like what you see.

• Cannot access ESXi server via network

  Hello world!

  We have a HP C7000 Encolosure with 4 BL460c Gen 8 blades in front size of it. Back size of the C7000, we have 2 SAN Switch, 2 switch HP BLc GbE2c layer 2/3 and 2 Onboard Administrator Module.

  Everything is working fine with IP addresses like this:

  OA active:

  IP address: 172.16.0.253

  STANBY OA:

  IP address: 172.16.0.254

  Server Blade BL460c Bay 1:

  The IP address of the ILO: 172.16.0.10

  Server Blade BL460c Bay 2:

  The ILO IP address: 172.16.0.11

  BL460c blade Bay 9:

  The ILO IP address: 172.16.0.19

  Server Blade BL460c Bay 10:

  The ILO IP address: 172.16.0.20

  We can ping pc that connected to the port of ILO on Onboard Administrator (OA) IP addresses above. (I can it call PC MANAGE?)

  Continue, we access OA via Web https://172.16.0.253 use of , then Console integrated to control 4 Server blades. We have mounted image ESXi 5.1 U1 and successfully installed on 4 servers blade.

  We manually config IP address on each ESXi Server (like this):

  BL460c Server Blade on Bay 1 as server ESXi 1:

  IP address: 10.0.0.11

  BL460c Server Blade on Bay 2 as server ESXi 2:

  IP address: 10.0.0.12

  BL460c Server Blade on Bay 9 as a server ESXi 9:

  IP address: 10.0.0.19

  BL460c Server Blade on 10 Bay as a server ESXi 10:

  IP address: 10.0.0.20

  Now we can ping server to another server ESXi ESXi 1. I mean 4 Blade Server can ping together.

  BUT:

  -We can not ping servers to blade PC of manage (that PC connect to the port of ILO on OSTEOARTHRITIS. In this scene, MANAGE PCs has the IP 172.16.0.100/16)

  -We unplug the network cable from the port of iLO, then connect it to the port number 24 on HP BLc GbE2c LY 2/3 switch, then address IP of the PC to MANAGE the 10.0.0.100/24 value. Always the same, can only access servers

  Can someone explain to me how to access this server (ping, http, etc...). Do we have to config switch HP BLc GbE2c LY 2/3? We read many many guide on the HP website, but they have not mentioned about routing or switch to configure

  Thanks in advance!

  It's my mistake!

  My servers have 2 connections FlexLOM. That a connection has been enabled for 'network management' in ESXi. I do not understand, then I activated 2 connections. That cause outside the network can not access them.

  I just disabled a single connection and everything works perfectly.

  I thank everyone!

• Windows 2003 cannot access remote network via Cisco VPN

  I have two computers at home, an XP Pro SP2 and another is Windows 2003 server SP1. If I set Cisco VPN XP (version 4.6) the Office (ASA 5510), I can access the office network resources. However, if I set the Cisco VPN on 2003, can I? t do the same thing. After studying the two routing tables, I think XP has this road: 192.168.0.0 255.255.0.0 192.168.101.5 192.168.101.5 1, but the 2003 doesn't? t. If I add this route manually (rou? add 192.168.0.0 mask 255.255.255.0 192.168.101.3) 2003, then I can access resources. Why?

  tale of 2003 routing.

  Active routes:

  Network Destination gateway metric Interface subnet mask

  0.0.0.0 0.0.0.0 192.168.10.1 192.168.10.3 40

  x.x.x.37 255.255.255.255 192.168.10.1 192.168.10.3 1

  127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1

  192.168.10.0 255.255.255.0 192.168.10.3 192.168.10.3 40

  192.168.10.3 255.255.255.255 127.0.0.1 127.0.0.1 40

  192.168.10.255 255.255.255.255 192.168.10.3 192.168.10.3 40

  192.168.101.0 255.255.255.0 192.168.101.3 192.168.101.3 10

  192.168.101.3 255.255.255.255 127.0.0.1 127.0.0.1 10

  192.168.101.255 255.255.255.255 192.168.101.3 192.168.101.3 10

  224.0.0.0 240.0.0.0 192.168.10.3 192.168.10.3 40

  224.0.0.0 240.0.0.0 192.168.101.3 192.168.101.3 10

  255.255.255.255 255.255.255.255 192.168.10.3 192.168.10.3 1

  255.255.255.255 255.255.255.255 192.168.101.3 192.168.101.3 1

  Default gateway: 192.168.10.1

  ===========================================================================

  Persistent routes:

  None

  VPN client has not been tested on Win2003. Customer requirements are described here:

  http://www.Cisco.com/univercd/CC/TD/doc/product/VPN/client/4_6/relnt/4604cln.htm#wp1024664

  and the show to competition of WinXP is supported.

• Win 7 Pro 64 bit configuration network, cannot access card reader when im not connected network

  IM under Win 7 Pro 64 bit on my laptop, im am Setup on an Exchange to my office network. The laptop has an SD card reader, and since I use CF cards I have a USB card reader also (my old card reader has been pre Win 7, so in desperation, this last weekend, I bought a new Targus card reader that preload drivers and is Win 7 compatible.

  The question is when im not connected to my office network and I put an SD card in the embedded player, or use the USB drive (the old drive did the same thing if it is not a drive issue) the computer laptop reconizes the event by sound in my computer scans the URL bar, and the card will not appear in the my computer window. So im hooked on my network it readings, launches autoplay and wonder what to do (as I have it setup to do).

  I always perform software updates and just checked my Windows is up-to-date.

  Any ideas as to what is happening and how to fix?

  Thank you

  Hello

  I suggest you to send your request to the below thread to get assistance on this issue.

  http://social.technet.Microsoft.com/forums/en-CA/categories/

  It may be useful

• Cannot access WVC54GCA on internet

  My camera works fine on my local network, but it cannot access it remotely via the internet. I watched several discussions on this subject here, been through all the documentation, I find in every detail, and I think I have everything set up according to what I read. You can see everything that could be wrong in my set up?

  WVC54GCA camera:
  Fixed IP: 192.168.0.200
  Subnet mask: 255.255.255.0
  Gateway: 192.168.0.1
  Primary DNS: 192.168.0.1
  Active DDNS
  TZO.com service provider
  Domain name: Linksys - Cam.com
  Other Web enabled 1024 access port

  D-Link DIR-635 router:
  WAN: connection type DHCP client
  IP: 192.168.1.2
  Subnet mask: 255.255.255.0
  Default gateway: 192.168.1.1
  Primary DNS server: 192.168.1.1
  LAN: IP: 192.168.0.1
  Subnet mask: 255.255.255.0
  DHCP server disabled
  Port Forwarding (virtual server also same set):
  IP: 192.168.0.200 TCP 80 Port
  IP: 192.168.0.200 TCP Port 1024
  Firewall router: DMZ enabled for 192.168.0.200

  Modem Linksys ADSL2 MOLT:
  Local IP address: 192.168.1.1
  Subnet mask: 255.255.255.0
  Local DHCP active IP 192.168.1.2 to 192.168.1.254

  I suspect that you have a DOUBLE NAT - which means that you have two firewalls in the path.  Look at your DSL Modem, probably because the WAN IP of the router D-Link is a 192.x.x.x it means that your modem is DSL NAT/DHCP and is also a firewall.

  Call your ISP and tell them that you want the Modem to a MODEM ONLY - (aka the bridge Mode) and once you do this, the router D-Link will get the REAL WAN IP from the modem.

  This will solve the problem, give your ISP a ring and you will be up and running in a few minutes

  See our test camera at MyHomeServer.com WVC54GCA

• Only browsers and AVAST cannot connect to internet via ethernet. Computers on the same router via WiFi, MS update, ping cmd - all access

  Help! I'm about to commit the homicide of the computer!

  I have been troubleshooting for weeks and am now bald from ripping my hair!

  Computer: Dell Inspiron 537 s Slim Desktop  w / Pentium Dual - Core CPU E5200 @250 GHz

  Network card: Realtek PCIe FE Family Controller (checked several times, through Windows, it works correctly)

  System: Windows 7 Home Premium, 64-bit with Service Pack 1

  Router: Netgear N600 model #: WNDR3400v2

  Cable router: SBV5220 Surfboard Motorola

  Now several months ago this desktop computer once more had SOME programs lose the ability to access the internet via an Ethernet cable.

  Affected programs:

  MS Internet Explorer

  Mozilla Firefox

  Avast! Security Suite

  Work of MS Security Update

  Ping works sites (Yahoo, etc.)

  Other computers connected to this network via WiFi - no problem getting on the internet.

  Run the network troubleshooter advises all is working properly, no suggestion.

  Attempted fixes:

  Turn off all extensions on IE (but don't forget Firefox and Avast! are also unable to access.)

  Disabled all start-ups and the package process

  Restarted in Safe Mode - still not able to access.

  Ran check complete virus, then check virus run start. Minor ad-ware 'virus' not found, all corrected automatically.

  Rebooted the router and the computer to infinity and beyond! s

  Tried other computers using the same ethernet cable connected to this wireless routers cable, no problem accessing the internet.

  Disabled functions package

  Off MS Firewall

  IP Reset configuration (memory: netsh ip net reset c:\resetlog.txt - without DOUBT NOT EXACT - OF THE MEMORY.) Command worked)

  As I said, this had happened before and then miraculously fixed itself after a short period (less than 1 week). This time, no joy.

  Of course, it's one of two things:

  (1) a configuration problem I just can't find/understand.

  (2) the problem of equipment more strange, more selective, in the universe.

  Anyone? Anyone? Bueller?

  Thank you more can I possibly Express for assistance.

  You could win the lottery and have a lot of beautiful children!

  (M.) Kel

  Hello team zig - zag,

  I wanted to thank you for your help. I finally broke down and reached out to our friends at Microsoft directly for assistance. They had me a role through all the things that you suggested (again). And finally (after many hours of phone and chat discussions) came up with an answer: "* shrug * we don't know what is the problem - choose a restore point and come back to that.» What I did. This has solved the problem of internet access, but created other problems I'm trying (nothing that I have to post here, they are specific to a particular program package).

  Still, I wanted to thank you for your time and effort on my behalf. I'm very, very happy!

  All my best,

  Kel

• Cannot open email in Hotmail via Firefox. I have Vista installed on the pc and Windows 7 on the laptop, but cannot access all the features of Hotmail.

  Cannot open email in Hotmail via Firefox. I have Vista installed on the pc and Windows 7 on the laptop, but cannot access all the features of Hotmail. I tried to clear the cache and restart Firefox, but I still cannot use Hotmail.

  Not this problem when I go to Internet Explorer.

  Hello, it was noted that the foxit pdf plugin is causing this issue. You can disable this plugin in firefox > addons > plugin until what foxit offers a patch/update for the plugin.