AXE looking for networks

Similar Questions

• Looking for network WiFi

  Why my wifi always looking for the 'networks '.

  See if ask to join new networks is enabled in the Preferenes system > network if this is the case, disable it.

• I am looking for network color laser printer

  Hello

  I'm looking for two network printers laser color for small business (lowest price) which has the following characteristics:

  LaserJet

  color

  network printer

  A4 paper

  double-sided printing

  and second printer have the same features + A3 paper

  Thank you

  Hi Hatemem,

  I found 2 printers that I believe meets all the specifications that you have requested.

  1. The HP LaserJet Pro 400 M451dn printer color
  2. The HP Color LaserJet Professional CP5225dn printer

  I would like to know if there is anything else I can do to help you.

• Pavilion G6 series: look for network adapter drivers

  Hello

  I need a driver for network controller

  PCI\VEN_10EC & DEV_8176 & SUBSYS_1629103C & REV_01
  PCI\VEN_10EC & DEV_8176 & SUBSYS_1629103C
  PCI\VEN_10EC & DEV_8176 & CC_028000
  PCI\VEN_10EC & DEV_8176 & CC_0280

  and ethernet controller

  PCI\VEN_10EC & DEV_8136 & SUBSYS_1662103C & REV_05
  PCI\VEN_10EC & DEV_8136 & SUBSYS_1662103C
  PCI\VEN_10EC & DEV_8136 & CC_020000
  PCI\VEN_10EC & DEV_8136 & CC_0200

  Computer laptop HP Pavilion G6 series

  Thank you

  Rebecca

  Hello:

  You need these drivers...

  This package contains the installation package driver for the controller LAN Realtek RTL8188CE wireless in the notebook models and operating systems.

  File name: sp53753.exe

  This package contains the Realtek driver local area network (LAN) that allows the NIC (NIC) Realtek chip in the notebook models that are running an operating system supported.

  File name: sp55031.exe

• Looking for networking of feedback

  Right now we are in a very simple local network... a few managed switches, some switches not managed (10/100), a firewall/gateway to the internet.  Resides on the 192.168.10.0/24 network.

  We are finally moving to a new LAN, but I'm a little worried about the ESX configuration.

  -The new LAN will consist of 2 layer 2/3/4 sensors (my heart) and 5 layer 2 switches (switches of my edge).

  -L' together LAN will be configured in the VLAN of the Department that will reside on multiple switches each (the guy who took our network cables have been less diligent in their placement on the grid).

  -The two main switches have had their ip helper routing, etc. enabled as they will route traffic between the VLANS, and I use DHCP to provide multiple addresses as a gateway for the high-end devices.

  -My ESX hosts have 4 network cards to put aside for my access to the VI client and also my VMs (so they can talk to the network).

  -New IP subnets use a 10.0.0 / 16 network.

  -L' network infrastructure (firewalls, switches, servers, server of virtual machines, printers, etc) will remain on the 192.168.10.0/24 subnet to reduce the headaches of reconfiguration.  Routing has been configured on the switches.

  I am setting for a nightmare?  What kinds of things I need to change on my ESX host?  I know I'm going to need to start my traffic, which, I guess, will result in several VM networking on the marking vSwitch VLAN... but what else?

  You gave the impression that your current network to your hosts would not change, i.e. stay with 192. Which would mean that the guest would stay the same as well. The only thing that should change is vlan tagging enabled on the side of the switch and to add the id vlan for 192 to the current host network config so that later, when you want to support additional networks that will be created, you will be ready.

  See you soon,.

  Bradley sessions

  If you have found this or other useful information, please consider awarding points to 'Correct' or 'useful '.

• Looking for network driver for an inspiron 17r 5737 for windows 7

  I checked around the dells driver support page that it has drivers for windows 8 only, but for windows 7, he has that no drivers for my laptop please help.

  Hi oleahector,

  To find out what PCI card has been installed in the system and download the drivers for this device, follow the steps in this link: http://dell.to/1amOS8o

  If you find that it is difficult in finding the drivers for PCI cards, follow the steps from the link above and please send me the Vendor ID and the device of the PCI ID or you can also send me the hardware ID as you did previously.

  Waiting for your answer!

• I'm looking for public networks of Yammer

  We are preparing to do our 'live' our community network Yammer.  I would also like to find some external Yammer networks to connect with.  Specifically, I'm looking for external Yammer networks in the field of:

  Religious communities

  Nuns

  Ursuline sisters

  Convent

  Consecrated life

  How can I get others like us who would be willing to collaborate?

  Hello

  Check on the website of the Yammer product.

  Yammer - product

  https://products.Office.com/en-us/Yammer

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

• I'm looking for a link to XP SP1 does not require a network connection to install

  I'm looking for a link to XP SP1 does not require a network connection to install

  Were you recently doing a Clean Install? I ask because you are implying in your installation of Windows XP is in 'gold' or SP0 (i.e., pre - SP1) level. Well sure, automatic updates will not work!
  You can use this path to level – says in passing:
  Gold XP to XP SP2 to XP SP3.
  Note that installing SP1a is TOTALLY USELESS!
  Here are the detailed instructions:

  1. download the installation of SP2, SP3 and IE8 files. I prefer to keep these on a USB key, but this is optional. Here are the links to all the installation of three files:

  http://www.Microsoft.com/download/en/details.aspx?ID=28 (for SP2)

  http://www.Microsoft.com/download/en/details.aspx?ID=24 (for SP3)

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=43 (for IE8)

  And if you wish, download the Setup file of a good anti-virus program. I recommend Avira free Antivirus:

  http://www.Avira.com/en/Avira-free-antivirus

  2. disconnect Internet.

  3. temporarily disable the automatic updates.

  4. install SP2. Restart twice.

  5 install the SP3. Restart twice.

  6 switch to IE8. Restart twice.

  7 install an Antivirus software.

  (What happens very often is that someone has their software antivirus running as they try to install SP3, which often translates into chaos! "This is why it must be done after installing SP3 and IE).

  8 make sure that firewall Windows is activated (it should be).

  (Now you can physically reconnect to the Internet.)

  9 visit Windows Update to download and install only the critical security updates.

  10 re - enable automatic updates.

  After the back if you need guidance.

• I start the player. a popup says 'installation', another says it is looking for a network resource that is unavailable: setup .msi [1]...

  original title: cannot get rid of popup

  whenever I start the player; a popup says "installation", which never seems to do anything; and the only way to get rid of it is to click at the top or bottom or screen; and it is looking for a network resource that is unavailable, another said: setup .msi [1]... .and I can't get rid of it... just moving road.

  I searched this mystery file: setup .msi [1] and can't find it.

  What should I do?

  Thanks for the info.

  Looks like it's maybe a Windows Installer error... has
  whatever it is impossible to install?

  Sorry, I don't have the answer and the only idea I can
  Think to would be to restore the system to an hour before
  the problem started.

  Good luck finding the answer...

• You are looking for a free network diagram software

  Hello

  You are looking for a free network diagram software

  Like this program: Edraw network diagram , but it is desirable for free. I want to draw physical Cisco network architecture detailed diagrams. With Cisco models logical network diagrams and drawings of the architecture of our office network (2000 users).

  Good day

  Vania

  Unfortunately, this community forums are for devices Cisco-Linksys (SOHO) home-network. The Cisco Catalyst WS-C4507R unit is managed by the Cisco Small Business support community.

  Please click here for plu answer your concern.

  https://supportforums.Cisco.com/index.jspa

  OnnagokorO

• I am looking for a way to only sync music files (mp3, flac, ogg, etc) on local network.

  * Original title: synchronize files

  Hey

  I am looking for a way to only sync music files (mp3, flac, ogg, etc) on local network. The Office uses iTunes, while the laptop is using Media Go. Each adds different files in the folder of the artist.  I want to synchronize only the files of songs themselves. Sync Toy, but also collective dwelling, you cannot add a wildcard character. (e.g. *.mp3). If I sync folders, each computer has useless files. I tried other software of synchronization, but once again, after the sync preview I have to deselect all other files.  I'll sit and listen to my answer. Thanks coach

  You could 'roll' so to speak, but write a batch file.  Inside the batch file would essentially be only one command, the copy command set to copy only the *.mp3 example and ignore existing files.  Basically, SyncToy, but with filters.  The command in the command prompt you would use would be XCOPY or ROBOCOPY, which you can type followed /? to see the options (or both are well documented on the Internet).

  Always it seems to me that it would be easier to just an another artist for iTunes folder and taskbar have their own libraries than others it does not.

• I'm looking for the name of the I'm connected to the network.

  I'm looking for the name of the I'm connected to the network.

  Hello

  There should be a sticker on the router with the name/password

  See examples: http://www.myaccount.charter.com/customers/Support.aspx?SupportArticleID=2924

  Network control and Internet\Network and sharing Center

  It will appear under view your active networks

• Windows 7 is constantly looking for other networks and drop connection

  Original title: the upgrade of Windows 7 for XP

  I first installed this OS a year ago to this date. Loved, absolutley was entrenched with how easy it was and just how 'worked '. I am a software developer myself and am happy to report all my IDEs, the server settings, etc. all worked like a charm. I had a little problem with VPN but it works with the Vista one (with some work) so I can't complain.

  My problem and this is why I uninstalled windows 7 and will be EVER is back at it before it is solved the same problem 10 years ago. He keeps every 60 seconds looking for other networks or drop the connection no reason apparent. With windows XP, I could disable the Zero wireless and everything would be fine. However, with windows 7 if I turn the WLAN service nothing on this earth that will allow me to connect to it without a third-party application.

  In the end I used a 3rd party app made by the chipset driver and it still failed (but had limited success).

  It is a known problem with windows operating systems. This just "does not work" at all. It's a pain in the thigh and is the reason why people are saying that the wireless is terrible for gaming. I know that isn't true since I have never had a fall with windows XP or my dual boot SuSe OS. 3rd parties even tried to fix this for microsoft in creating the WLAN and Vista Antilag optimizer which all fail for windows 7.

  And just to show you how apparent is this bug...

  customer complaints

  It seems to somehow keep seeps through the cracks with every version of windows. Simply because I know that this wont never be resolved after 10 years ive thrown my copy in the trash and advising all my loved ones to stay on XP. I used to think... "they'll fix" but quite honestly, I think that microsoft is tone deaf to it.

  With regard to upgrading my firmware on my router is concerned, I have programmed my own. I used 3 different routers. My drivers are all up to this date for my card wireless on this box. I used XP drivers with slightly better results but remains unacceptable. I was running with a hackintosh and vmware fusion rather than deal with these headaches after work.

  Maybe im being a bit too critical, but make you pay back for a BONE which does not have everything because of XP.

  After buying a WNDR3700 N600 top double band brand new brand of the router Netgear power line she didn't always.

  2 solid ways fixed my issue.

  the network of windows 7 reason fails

  One, I had to turn off the service navigation computer in administrative services as noted above.

  Two, I had to turn off the power save feature on the usb network adapters.

  Not many people understand how to solve this problem, but I would ditch the derivative of the net bios completely.

• looking for a networking best practices publication

  The following quote re ESX host network configuration came from one of our technical pre-sales representatives IBM in the Vancouver area...

  "IBM and VMware have long have jointly published a best practice of the 2 Ethernet interfaces (1 Gb/s each) have teamed up for a redundancy and bandwidth - separated into 3 VLANs - to serve the three channels (management, vmotion and vmnetwork).

  Someone at - it a link to this document?  I can't seem to find it, and I really want to read.

  Thank you.

  Hello

  Did not see the document you are looking for, but if you want to learn more about some different network configurations have a look here:

  http://www.NetworkWorld.com/community/blog/7119

  -Pal-André

• I am looking for program by using Network Time Protocol of the Dave Mill. Where can I get help with this?

  original title: the help of time Windows

  I am interested in possibly edition. certainly the configuration, compile and test an implementation of the Dave Mill Protocol NTP (Network Time) on Windows XP Pro.  The tricky part so far implements strong, yet easy to use authentication.  We use version open source secure sockets layer.  I'm not a developer kernel or the Windows service, but I have experience of writing kernel drivers PCI for time servers dedicated which sync directly to a scale of coordinated universal time.  Whoever did this, or they could point me in the right direction?  (I am familiar with ntp.org, openssl.net, USENET newsgroups and the other usual suspects).  Help for network time, W32Time, stuff crypto or "timing" system on the line of Windows free software would be highly appreciated.

  Kind regards

  Dave Johns

  Hi Dave,.

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited to the audience of developers on MSDN. Please post your question in the following forum:

  http://social.msdn.Microsoft.com/forums/en-us/categories

  I hope this helps.