back may be a date of System Restore & how do I manually enter

Similar Questions

• I messup and now my system is not compatible, and every thing is blurry. I am trying to use the system restore, but nowhere can I enter the date of 2 days ago

  I spoil yesterday 8/24 today my system is not compatible, and every thing is blurry.

  I am trying to use the system restore, but nowhere can I enter the date of 2 days ago that do I do?

  Post proposed by the facilitator for the appropriate forum placed

  Hi Michael,

  We suggest that you try to start your computer in safe mode to check if the problem persists. You can follow the steps given on Advanced startup options (including safe mode).

  Let us know how it goes.

  Kind regards.

• Desktop appears again without any data. System restore fails to «incomplete system restore»

  Original title: System Restore failed

  My computer turns off on its own yesterday. After the reboot, my office was back to default settings. Everything that I had stored on the desktop disappeared and I also lost all my favorite places. I tried restoring the system using different dates but it said system restore incomplete. I've lost everything?

  Hi mike,.

  ·         Have you received any messages when the computer starts very well?

  ·         Your data is also missing?

  ·         Do you have any other user accounts on the system?

  Step 1: Try to start in last good known Configuration and see if you can start very well.

  How to start your computer by using last good known Windows XP Configuration

  Step 2: Start the computer in safe mode and check the number. Report of the results.

  See also:

  Abnormal termination can affect the system restore

• Add a date of system restore

  I want to insert a date in order to restore my computer to an earlier date. The system, I cannot give a date, only his own date. WHY?  How to do this simple task?

  You can't do a restore point for the last week, today.

  You can do a Restore Point for today, so that next week, if necessary, you can restore to today.

  Think about it: How can you make a Point of restoration today something happened in the past.

  You should have in the past, if space allowed in SR, to come back to today.

  See you soon.

  Mick Murphy - Microsoft partner

• I can't perform a system restore, how to fix system errors?

  I clicked on system restore, and I was told that the restoration will not be complete.

  Problems with system restore:

  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

  1. If you use Norton (Etc), disable it before using System Restore. info at the link above.

  2. try SR in safe mode:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  3 Malware will stop at the system restore:

  If necessary, do all of the above work Safe Mode with network.

   

  To get into Safe Mode with network, press F8 at the Power On / boot and use key arrow upward to get into SafeMode with networking from the list of options, and then press ENTER.

  http://www.Malwarebytes.org/MBAM.php

  Malwarebytes is as its name suggests, a Malware Remover!

  Download the free Version from the link above.

  Download, install, upgrade and scan once a fortnight.

  See you soon.

  Mick Murphy - Microsoft partner

• (Windows 8) System Restore how can I?

  Guys,

  I was see several issues since windows 8A are released on the no sound, Apps, and other small problems with the operating system and laptop.

  System Restore is a software available in all versions of Windows 8. System Restore automatically creates points of restoration, a memory of the system files and settings on the computer to a point in time. You can also create a restore point. Then, when you use the system restore to restore your computer to a point in time before the beginning of the program, the System Restore returns your computer for files and settings of the restore point. Your personal files and documents are not affected.

  Most of these features worked fine until an installation (Windows), or just randomly stopped working.

   

  As a general rule, when a features quit working all of a sudden the system restore will bring the laptop at a time where the features on the laptop was working.

   

  When you do this step, you must be sure to save any information or downloads you recently installed on a flash drive or any type of removable media.

   

  System Restore is a great feature that HP and other manufactured goods have to give you the possibility of not losing the functionality at any time while having the laptop.

   

  

  First of all, here is the document that will help guide you in this step.

  While taking these steps, I must warn to re-register you please any information you have recently saved or downloaded.

   

  THX

  Hope it will be useful for you guys!

  THX

• Windows Vista - total system restore how

  Computer my son is an e-machine with windows vista. Of course, he tried to download a program to a xbov by accident and then tried to delete. I can not find the program on his pc, but since then, the pc will start and while navagating the pc will be closed and restart and keep trying to navigate. I would like to do a total system restore, but I can't find how to do it on windows vista. I'm too used to my windows xp. Help, please. Thank you...

  p.s. If I do that it will try to stop and then restart again on me? If yes what is the best method on how to do... I don't have disk they all inside the pc.

  Hello
   
  
  1. is only a problem when running a particular program?
  2. could you give us the exact name of the program that you have installed?
   
  You can check if this program is listed in the program and you can remove this program from there.
   
  First of all, you must disable the auto reboot system error and then we can check whether or not the problem is in the clean boot state.
   
  Method 1.
  Step 1. Disable automatic reboot to avoid unwanted restarts on system failure.
  a. when your computer starts up keep press F8 on your keyboard until you get the Advanced Boot Options screen.
  b. now, use the arrow keys, select Disable automatic restart in case of system error and press ENTER.
   
  Step 2 Start the computer in a clean boot state and check.
  See the article below for instructions on how to start your computer in a clean boot state.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 in the above article.
   
  Method 2.
  Type eventvwr.msc/s in the address bar.
  The list of all the events that are listed as 'Error' in the main window when you go to 'Newspapers Windows' and 'Application '. There is often a large number of them. Send us any ones you see listed for the last few days. (Please also do it for the log files in 'System'). When you do, provide us the name of the 'Source' and all that is listed in the description below the list of newspapers box when you click on one.

  For more information on event viewer, see the articles below:
  Open event viewer
  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Event-Viewer

  If you want to restore the computer to factory settings, you can contact the manufacturer of the computer.

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Satellite A500-1CO - loss of data after system restore

  Hi all, because the system was slow I decided to restore the system using the DVD of restoration system (1,2). The problem is that I have not saved anything from drive D, and after the restore, all files have been deleted. My logic was unaware that the restoration apply to drive C (system disk) and let the D drive as it is, but I was so wrong.

  Is there a way to recover all or part of the lost data?

  Please help me. Thank you.

  Hi mate

  Unfortunately, I think that there is not much to do now.
  Recovery DVD redefines the laptop to factory settings and, therefore, this disc format the whole HARD disk and also all the partitions and, therefore, you will lose all data if you n t backup this before starting this procedure.

  You should read the user manual or information before starting the recovery. :(

• Win XP SP3, no taskbar (tray) does AutoScan, no system restore, how to fix?

  Everything was in good working order when I shut down my pc for the night.  The next morning, I tried to play a mp3 music file, but no sound. Then, I noticed that (the speaker icon) volume control icon was missing from the taskbar. I have rebooted, thinking that would restore the icon, but the result was that the taskbar all disappeared, leaving me with no start button, no way to access programs or tools.

  Help and Support is not available, that is why it is the restoration of the system.  Via the Task Manager (file > new task > run) I can run programs and applications, but even if they seem to run, they do not work.

  Has spent two full days, trying to solve this problem and I now want to reinstall Windows, but another question is: I have only the original CD of XP Home.  Installation of XP says my installation is newer than the one on the CD (my system installed a Service Pack 3 and all Windows updates), so it can not be repaired and resettlement (since the old XP CD) will cause all my existing files and programs are permanently lost. Is this true? We used to be able to reinstall over an existing installation of Windows, and it would be, indeed, to 'renew' the Windows installation, but leave our files, images, programs, etc. intact. As a graphic designer, I have a large number of files, pictures, programs and applications that cannot be replaced, and I can't risk losing them.

  I have a sufficient margin on a D: / drive for everything on C: /, but wants that the wizard settings, and files on the XP CD to copy the content of two disks, so after a few hours of the collection of files, the wizard reports not enough room on D: / the transfer. I tried to burn to CD/DVD, but the wizard does not recognize my optical drives, only a floppy drive, and it would take hundreds of 1.44 MB floppies. I saw no floppy drive in stores for years and that a lot is not an option to purchase.

  I have a laptop available (which I use to access this web site), but it's a Dell Latitude older with far enough disk space to contain a small amount of data that I need to move away from the broken Office.

  The office with the problem began his life as a TigerDirect Systemax, with a 2.50 Ghz Intel processor, 1 GB of RAM, two HARD drives, each capacity of 60 GB, about 1/3 used on C: /, I need to save if possible, and about 1/4 used on D: / I could copy my files to D: / If the wizard would not copy the contents of D : / and C: /.

  I can't find any way to select which copy other than the ability to choose or not choose certain types of files. No way to tell the Assistant is not to copy the D: / drive.

  I would be very happy if:

  1. There is a way I can restore my taskbar and start button, (thus allowing me to access the tools to solve other problems that caused the problem);

  Or

  2. If I can simply reinstall XP on my existing installation without losing existing data (my programs, files, etc.)

  Yes, I realize that it is time for a new operating system and probably a new machine, but I cannot and I do with what I have. Any help and suggestions would be welcome.

  What's an error 5 - a permissions problem (you do not have permission).

  Did you use a registry cleaner and if what you (and why you thought it would help)?

  I love the good registry cleaners and have never had a problem with them, but there are of course a lot of horror stories and Council do not to use.  But I think as long as you have a plan for what to do and how to recover if your system fails or doesn't start at all after having used to have them home.

  I have probably used/tired all and never had a problem.  Can not say something very good has happened except that I could see the report of all the unwanted that he removed, for the most part, uninstall of products that do not do a good job of cleaning after themselves (even Microsoft products) and felt better then think things were more to the less net because I could see all unwanted leftovers that was deleted.

  Reinstalling XP is never an option for me.  my XP has been installed and works very well after almost 10 years.  There are too many people who need to be able to fix their system and they have no installation CD for so never had a she, lost the dog has eaten, etc, or their system does not have a CD/DVD drive even if they could come with an installation CD.

  Learn how to fix things in the most difficult conditions that matches that you want to find in the real world on the planet called Earth and not a fantastic planet or a world of dream.

• Cannot run system restore

  I tried a few hours back to my lap top back to an earlier date using "System Restore". Every time it seems it will work, but it is not however there is an error code I have: oxcooooo22. I tried to search that with no luck at all. I wonder if I'm doing the right to the procedure. If someone would care to give me a hand I sure would appreciate it, I need a method step by step instructions, because I am a novice to this. Thanks in advance for your help and response.

  Sincerely

  gogoplex52

  Hello Gogo,

  Thanks for posting your question on the Microsoft community.

  Thank you for details on the issue.

  This problem can occur because of damaged or missing Windows files, or as a result of a software conflict or drivers.

  I suggest to do a restore of the system in safe mode and check if it helps.
  Reference:
  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows/Start-computer-safe-mode#start-computer-safe-mode=Windows-7

  Safe mode starts Windows with a limited set of files and drivers. Startup programs do not work in safe mode, and only the basic drivers needed to start Windows are installed.

  If this does not help, run the system file checker (SFC) and then try to restore Windows.
  Reference:
  Use the System File Checker tool to repair missing or corrupted system files
  https://support.Microsoft.com/en-us/KB/929833

  System File Checker is a Windows utility that allows users to find corruptions in Windows system files and restore the damaged files.

  Note: when you use system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• My first system restore date is July 30, 2009, and I need a date of previous restoration to eliminate a virus! Help, please!

  I discovered a terrible virus named muwiropu.dll that I tried to get rid of weeks using a variety of anti-virus programs, nothing helps. It was 'created' July 6, 2009 according to its properties. At this point, I thought I should choose a "restore point" before this date - but the first 'date of the restoration', I see it as an option on my computer is on July 30, 2009. I tried to 'free' space to see if it could remedy the situation, but not drive. Other ideas to find somehow an earlier date to restore or to get rid of this virus? Basically, what I run, especially all the programs at startup, give me this error message (sometimes 25 times in a row): "the application or DLL"C:\Windows\system32\muwiropu.dll is not a valid Windows image. " Please check this against your installation diskette. "I don't know what to do to do this, go away!

  I read the messages on how to choose a date of system restore, but not how to find dates earlier than that displayed automatically.

  Eliza,
  I have fixed the thread in the original post and here's the URL: http://social.answers.microsoft.com/Forums/en-US/vistasecurity/thread/ba80504b-61f1-4d71-960f-b561798b7b42

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Advised to make soft the system restore... can not find place to enter the date of the restoration

  Where can I find this day soft system restore restore

  Hello

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Blue screen on startup, the system restore / repair did not work?

  Hi, I get a blue screen on startup and cannot start windows - with the error code x0000007E.

  I followed the steps on http://support.microsoft.com/kb/958233#StartupRepair however runs the repair does not work, and did the system restore.

  Will be saved my files / is there a way to fix this? Thank you!

  Hello

  You can save your files by putting the drive in another computer as a 2nd disk (best) or external
  Drive USB enclosure and then backup to removable media such as CD, DVD or other USB drives.
  Of course a real store of the computer or the manufacturer of your system can help to recover the files.

  Or you can use a boot Ubuntu CD to back up data.

  Use Ubuntu Live CD to backup files from your Windows computer dead
  http://www.howtogeek.com/HOWTO/Windows-Vista/use-Ubuntu-Live-CD-to-backup-files-from-your-dead-Windows-computer

  --------------------------------------------------------------

  Check this thread for more information using BlueScreenView, MyEventViewer and other methods
  to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

  We can analyze the minidumps if make you it available to the SkyDrive or another file
  sharing sites.

  ZIP or download the content of the C:\Windows\minidump

  Use SkyDrive download collected files and after shot/screenshot.
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  -------------------------------------------------------------------------

  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  (also Windows 7)
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  ===========================================================

  The system has RAID? If so, it's also very suspicious.

  This error is usually a driver problem and display adapter (video) driver is the most suspicious if she
  may be others. Antivirus/antispyware/security programs, equipment (heat) and major software problems
  can also cause the error. When you get to the section of the driver to use the Troubleshoot utility my generic
  methods in the next message and then return to the if necessary troubleshooting tool.

  Have you recently added hardware or drivers updated? Don't forget to look in Control Panel - Windows
  Updates to see if all drivers have been updated it. Other donor opportunities include the antivirus/anti-
  spyware/security programs.

  When you get to the pilot and sections of the memory of the troubleshooter check the following message to
  update drivers and memory test and then return to the troubleshooter if necessary.

  BCCode: 7F 0x0000007E which is also 0x1000007E

  Cause

  SYSTEM_THREAD_EXCEPTION_NOT_HANDLED bug control is a very common bug control. TO
  interpret, you must identify which exception has been generated.

  Common exception codes are:

  • 0xc0000005: STATUS_ACCESS_VIOLATION indicates a memory access violation has occurred.

  For a complete list of exception codes, see the Ntstatus.h file located in theinc directory
  the Microsoft Windows Driver Kit (WDK).

  Solve the problem

  If you do not have to debug this problem, you must use certain basic troubleshooting techniques.

  • Make sure you have enough disk space.
  • If a driver is identified in the bug check message, disable the driver or check with the
  • Reference of the manufacturer for driver updates.
  • Try changing video cards.
  • Check with your hardware vendor for updates to the BIOS.
  • Disable the BIOS memory options such as implementing caching or shading.

  If you plan to debug this problem, you may find it difficult to get a stack trace. Parameter 2
  (the address of the exception) must identify the driver or function that caused the problem.

  If the exception code 0 x 80000003 occurs, a hard-coded breakpoint or assertion was hit, but the system
  has been launched with the /nodebug. switch. This problem should occur infrequently. If it occurs repeatedly,
  Make sure that a kernel debugger is connected and the system is booted with the Switch/DEBUG .

  In case of exception code 0 x 80000002, the trap frame provides additional information.

  If you do not know the specific cause of the exception, consider the following questions:

  • Hardware incompatibility. Make sure all new hardware that is installed is listed in the
  • List of Microsoft Windows Marketplace tested products.
  • Service driver or defective peripheral system. A service driver or defective peripheral system can be
  • responsible for this error. Hardware problems, such as the incompatibilities of the BIOS, memory, conflicts
  • and IRQ conflicts can also generate this error.

  If a driver is listed by name in the bug check message, disable or remove that driver. Disable
  or remove drivers or services that have been recently added. If the error occurs during startup
  sequence and the system partition is formatted with the NTFS file system, you may be able to use safe
  Mode to rename or to delete the faulty driver. If the driver is used as part of the system startup procedure
  in Safe Mode, you must start the computer by using the Recovery Console to access the file.

  If the problem is associated with Win32k.sys, the source of the error may be a third remote
  control program. If this software is installed, you can remove the boot of the computer service
  by using the Recovery Console, and then by removing the offending system service file.

  Check the system log in Event Viewer for additional error messages that might help identify the
  device or the driver that generated the bug check 0x7E.

  You can also disable memory cache BIOS may try to resolve the error. You should also
  Run the diagnostics of material, especially the scanner memory, which provides the manufacturer of the system.
  For more information about these procedures, see the manual of your computer.

  The error that generates this message may occur after the first reboot during Windows Setup, or
  Once the installation is complete. A possible cause of the error is lack of disk space for installation and system
  BIOS incompatibilities. For problems during the installation of Windows that are associated with the absence of disc
  space, reduce the number of files on the disk drive hard target. Find and delete any temporary
  the files that you do not have to have files hidden Internet, backup application and.chkfiles files that
  contain fragments of file saved to disk scans. You can also use another hard drive with more drive
  free space for the installation. You can solve the problems of BIOS by upgrading the version of the system BIOS.

  BCCode: 7F 0x00000007E who is also a 0x1000007E<-- read="" this="">
  * 1141.html? order = votes http://www.faultwire.com/solutions-fatal_error/System-thread-exception-not-HANDLED-0x0000007E-

  ----------------------------------------------------------------------------------------------------------------------

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard event viewer
  Windows. TIP - Options - Advanced filter allows you to see a time rather
  of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during ' blue screen of the.
  death ' crashes and displays information about all accidents of a table.
  Free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by drivers of old or damaged, in particular the video drivers
  However, there are other causes.

  You can do mode if necessary safe or the Vista DVD command prompt or
  Options recovery if your system is installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
  program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Does not work
  tell all possible driver issues).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• STOP: 0x0000008E and system restore

  Hello world

  My Windows Vista recently blue armored to Midway through the boot process, see the details of technical error following:

  STOP: 0X0000008E (0C 0000005, 0 X 00000000, 0XB71D5A48, 0X00000000)

  The error always appears during startup in normal mode (i.e. after the entry are the PW Windows and during the loading of the incons office etc.).  My machine never blue armored in safe mode.

  Don't know if it is a hardware or software error, I did a restore of the system for three weeks before.

  The system seems to work fine now.

  All hunch that it was a mistake to orsoftware material? What can I do to avoid blue screen in the future?

  Your ideas are appreciated.

  Thank you very much

  Simon

  Hello

  Check this thread for more information using BlueScreenView, MyEventViewer and other methods
  to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

  We can analyze the minidumps if make you it available to the SkyDrive or another file
  sharing sites.

  ZIP or download the content of the C:\Windows\minidump

  Use SkyDrive to upload collected files
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  --------------------------------------------------------------------------------------------------------------

  Two main causes of this blue screen video drivers and BIOS - check with the system manufacturer
  Site for graphics (Video) card and BIOS, then on site of the manufacturer of the device for the last video. It may be
  other pilots to check there. Disable the installation of self as those who are older and if
  Updates Windows suggests a pilot just HIDE. Antivirus is another possibility.

  See methods of update driver generic in the next message.

  BCCode: 8th 0x0000008E is the same as 0x1000008E

  Cause

  Bug KERNEL_MODE_EXCEPTION_NOT_HANDLED control is a very common bug control. To interpret it, you must identify which exception has been generated.

  Common exception codes are:

  • 0xc0000005: STATUS_ACCESS_VIOLATION indicates that a memory access violation has occurred.

  Solve the problem

  If you do not have to debug this problem, you must use certain basic troubleshooting techniques:

  • Make sure you have enough disk space.
  • If a driver is identified in the bug check message, disable the driver or check with the manufacturer for driver updates.
  • Try changing video cards.
  • Check with your hardware vendor for updates to the BIOS.
  • Disable the BIOS memory options such as implementing caching or shading.

  If you plan to debug this problem, you may find it difficult to get a stack trace. Parameter 2 (the address of the exception) should identify the driver or function that caused the problem.

  If you do not know the specific cause of the exception, consider the following:

  • Hardware incompatibility. Ensure that all new equipment installed is listed in the list of the products tested Microsoft Windows market.
  • Service driver or defective peripheral system. A chauffeur service or defective peripheral system could be responsible for this error. The hardware problems, such as BIOS incompatibilities, conflicts of memory and IRQ conflicts can also generate this error.

  If the verification of the message bug list a driver by name, disable or remove that driver. In addition, disable or remove drivers or services that have been recently added. If the error occurs during the startup sequence and the system partition is formatted with the NTFS file system, you may be able to use Safe Mode to rename or to delete the faulty driver. If the driver is used as part of the start-up procedure of the system Safe Mode, you must start the computer by using the Recovery Console to access the file.

  If the problem is associated with Win32k.sys, the source of the error may be a third-party remote control program. If this software is installed, you can remove the system startup service using the recovery and then Console by removing the offending system service file.

  Check the system log in Event Viewer for additional error messages that might help identify the device or driver responsible for control of bug 0x1E. You can disable the cache in memory of the BIOS to try to resolve the error. You must also run the diagnostics of material, especially the scanner memory, which provides the manufacturer of the system. For more information about these procedures, see the manual of your computer.

  The error that generates this message may occur after the first reboot during Windows Setup, or after installation is complete. A possible cause of the error is lack of disk space for installation and the system BIOS incompatibilities. For any problems during the installation of Windows that are associated with lack of disk space, reduce the number of files on the hard disk drive target. Search and delete temporary files that you do not have to have, files hidden Internet, application backup files and files saved.chk, which contain fragments of files on disk scans. You can also use an another hard disk drive with more free space for the installation.

  You can solve the problems of BIOS by upgrading the version of the system BIOS

  BCCode: 8th 0x0000008E is the same as 0x1000008E<-- read="" this="">
  * 1151.html? order = date http://www.faultwire.com/solutions-fatal_error/kernel-mode-exception-not-HANDLED-0x0000008E-

  =============================================

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------

  Also this, so you can see the probable bluescreens. (If necessary)
  
  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  -------------------------------------------------------------------------

  It comes to my convenience store generic bluescreen:

  Here are a few ways to possibly fix the blue screen issue. If you could give the info to blue screen
  This would help. Such as ITC and 4 others entered at the bottom left. And another error
  information such as the STOP codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death '.
  hangs and displays information about all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
  There are other causes.

  You can do without if needed fail or the Vista DVD or recovery command prompt mode
  Options if your system was installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker
  (SFC.exe) program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible
  driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• system restore an unspecified error occurred during restore of the system... why it can not restore for me?

  I tried to restore my system 3 times because something is wrong and I wanted to get back to normal... but it keeps saying

  Hi, Doris.

  An analysis of the system by using the System File Checker

  Start > type CMD

  If you are using Windows Vista and Windows 7, right click on the CMD window and select run as administrator

  If you use Windows XP, press ENTER to open the command prompt window

  Type SFC/scannow

  Press enter

  Note: There is a space between sfc and / scannow

  How to analyze the entries in the log file generating the program Checker (SFC.exe) resources of Microsoft Windows in Windows Vista

  http://support.Microsoft.com/kb/928228.------

  If it is missing or damaged you will be asked for your Windows Recovery CD/DVD files so please with it.

  You can also view the solutions proposed in these discussions:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-system/i-am-unable-to-perform-a-system-restore-how-do-i/d80e54ae-2829-4270-B032-455d017172b4

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware/unable-to-do-a-system-restore/1ef52b3f-ff34-461D-9813-a95d341e2afd