Back to cache a sequence the old way. not in real time during the introduction of the cache

Similar Questions

• RAM Preview plays is not in real time on the new Macbook Pro

  Hello world

  I have problems getting after effects to play the video in real time in AE CS6. I use a brand-new Macbook 2015 Pro 13 "retina with a dual core 3.1 GHz processor Intel Core i7 and 16 GB of RAM. I just made sure my copy of AE CS6 is up-to-date with the latest updates (11.0.4.2), and yet I am unable to read the video or animation in real time using the RAM Preview to any size greater than 25% in the Viewer.  If I try to play a video clip of 29,976 fps, the framerate tops out at about 17-18 frames per second. When I press 0 for the RAM Preview, it starts caching the images such as normal, but even after a loop continuous cadence comes not near real-time. The audio plays fine, but the video starts immediately behind. I can't even a scene of simple great test of a form of retouching layer move on the playback screen in the real time RAM Preview.

  That said, I can get it to play in real time if I reduce the viewer up to 25%. But obviously, I won't be limited to work in quarter resolution on a new laptop. My last Macbook pro from 2008 and completely across the well treated RAM previews, being able to cache images and play them back in real time without problem.  I have to assume that there may be a function that I'm missing or something goes wrong, unless I just grossly overestimated the capabilities of my new laptop.  But surely, it should be able to manage simple video playback. I had no problem using first on this computer, then it can of course deal with the video.  Any help you can offer would be much appreciated, because this problem becomes really frustrating!

  Just for fun, try the trial of CC 2015 and see if it behaves correctly.

• can't see changes to the photo in real time during editing

  Hello

  When I edit photo it won't let me see the changes in real time, unless I turn down hardware acceleration. I tried the update of windows and even downloaded the drivers two charts, but no solution. I read may be due to software mcafee, but I do not use mcafee...

  Thank you.

  Hello

  When I edit photo it won't let me see the changes in real time, unless I turn down hardware acceleration. I tried the update of windows and even downloaded the drivers two charts, but no solution. I read may be due to software mcafee, but I do not use mcafee...

  Thank you.

  ==================================
  If reducing the graphics hardware acceleration
  improves the issue... it's a strong indication that
  you have a problem with your video driver.

  Might be interesting to try to find the support Web site
  Mfg. of your video card for a Win update
  XP compatible video driver. Or... If your computer
  is a laptop... look for the support site for your computer
  Reference of the manufacturer.

  If you do not know the make and model of your
  Video adapter, see the documentation that
  supplied with the computer.

  Also you can find info on your video by driver
  go to Device Manager: you can launch
  By clicking Device Manager on... Start/run and
  type or copy / paste:
  devmgmt.msc
  And then press ENTER.

  Expand "Graphics cards" and right click
  the name of your graphics... then
  choose... Properties / tab pilot... FYI.

  You should find the make and model of your
  adapter display as well as the version of the driver.

  If the driver on the Web site is no longer
  current than you run...
  Download and install it. In addition, installation
  instructions that should be followed closely
  should be available on the support site.

  Once installed the new video driver... you
  can restore your full acceleration.

  Aslde the... If your editing functions have been
  working properly and suddenly changed... I am
  wondering if one of your Windows updates...
  updated your video driver.  Sometimes the new
  driver is not as functional as the one you have already
  a.

  System restore would have been an easy way
  to correct this, but maybe you could go to the device
  Manager and rolling toward the video driver earlier.

  (FWIW... it would be a good idea to create a system)
  Restore point before making the change)

  You can launch the Device Manager by going
  TO... Start/run and type or copy / paste
  devmgmt.msc
  And then press ENTER.

  * Proceed at your own risk *.

  Expand: Graphics cards
  Right-click on the name of the video card and
  in the menu choose... Properties / driver tab.
  Roll the button return to the version...

  (306546) HOW to: use the driver to restore roll back feature
  a previous Version of a device in Windows XP driver
  http://support.Microsoft.com/default.aspx?scid=kb;en-us;306546

  Windows XP - Vista - 7 - restore video drivers.
  Removal instructions
  http://www.nvidia.com/object/driver_rollback.html

  How to roll back a faulty device driver
  for a Version prior to Windows XP, Vista and 7
  http://www.techsupportalert.com/content/how-roll-back-misbehaving-device-driver-previous-version-Windows-XP-Vista-and-7.htm

  Good luck...

• Able user to zoom in/out the image in real time the performance of façade?

  Well I have searched this and have developed empty. What I would do, is to have a picture of a diagram on the front panel and during execution of the VI user can somehow zoom in/out the image in real time.

  I know there is something that is called Zoomfactor that you instantiate a way in the block diagram, but that seems to zoom in on a picture of race prior to the program. The zoom is not in real time. There is no possibility of real user to zoom in/out with free will, using the Zoomfactor I see. (Sorry I forgot display name of the service). And I saw messages by a man named George Zou that seems to come with a VI which is closest to what I want, but I pulled the VI site seems not compatible with my computer (my rig is under XP with Labview 2013 currently). So, I was wondering if someone else had found other answers appropriate to my specifications?

  Use a structure of the event to change magnification during execution.

  You can even program your own shortcuts to the structure of the event, for example if the user clicks on a particular point on the picture and you read this coordinate on, and you zoom way at this point remains in the Center... There are many options to play with...

• What happened to the old way to bookmark a page

  When I want to bookmark a page, this whole box appears. The old way it just this bookmark. How can I go back to the old? It seems so complicated and does not work properly. THX

  Hi jromano6178

  Sorry, but I think that's not possible, see in the next article, if you missed or confused with something, you know already, but if you like you can see accurately:

  How to create a bookmark?

  Thank you

• Until the latest update when the AutoComplete bar has been selected, he "went" no other by clicking. I must now click the refresh arrow. It won't work even with the return. How can I operate the old way easier?

  Until the latest update when the url I wanted in the address bar of AutoComplete has been selected, it "accompanies" no more further by clicking on. I must now click the refresh arrow. It won't work even with the return. How can I operate the old way easier?

  You can disable this extension in tools > Modules > Extensions and close and restart Firefox normally.

• Can you turn off or avoid new ' record under "choice of the default and return to the old way of Acrobat 9.

  In Adobe Acrobat Standard DC when you go to file save as, you are presented a new menu with the option to "choose a different folder...". "If you click this option, you get the 'Old' way to save as window.

  Is it possible to go straight to save her as old window? My users give me push the extra step now present and they scan hundreds of documents a day.

  Thank you in advance.

  Thank you Bernd Alheit.

  Weapons of suggestion of as soon as I dug and found in preferences, general: 'show of storage online saving files', unchecking allows it to return to the value default or 'old' Save as way past versions.

  Thank you!

• The Back button only allows me to return a page at a time instead of select a previous page from a drop-down list. It is a real problem: someone has any ideas?

  In the previous version of Firefox, I could go back to a previous page by clicking on a part of the previous button which brought up a list of recently visited sites and clicking on one of them, might go back to this page. This installation does not seem to be available in the latest Firefox, and the back button only goes back one page at a time. It's really embarrassing, like,

    it now takes longer to get to an earlier page
    there is no visibility of previous pages visited
    any actions carried out on webpages are undone when going back through them - this does not happen when jumping back several pages in one go.
  

  It is a real problem, I used the old system constantly and cannot continue to use Firefox 4.0 unless there is a way around it.

  Use it to open the history list:

  • Right-click on the back or next button
  • Press and hold the left button of the mouse on the active back or forward button until the list opens

  You can watch this extension:

  • Backward forward history Dropdown: https://addons.mozilla.org/firefox/addon/backforedrop/

• Under XP, when I try to install the program screen flash BACK and trying to change back, but then return to the windows form.

  When I run the Setup in the program screen flash backs and trying to change back, but then return to the windows form.

  * original title - back program will not be run. *

  How old is this program and what is his name?  If you give us the name of the program someone read here who have experience with the peculiarities of the program might be able to provide more help.

  Open a command prompt, and then try running Setup from the command prompt.  To start a command prompt, type CMD in the box run from the start menu and press or click OK .  At the command prompt, you can use the CD command to navigate to the CD, or you can run the Setup program by using the full path to the Setup program, for example:

  x:\Install.exe

  where x is the CD drive letter.

  John

• How to get back a few characteristics of the rocket?

  I was very happy owner of a Sansa Fuze (without "+") for many years. It has proved to be very robust, even on a sailboat off the coast. I use it mostly to listen to audio books. Then, when the rocket + is out, and he has addressed my main desire: be able to come back after the beginning of an audio file (and had a USB plug instead of the industrial property), I don't think twice and just bought. But I was very disappointed; It is almost useless for my use and end up using the "rocket" much more than the rocket. My main problems are:

  1. There seems to be no way to navigate through the folders. All audio files are presented in an alphabetical list of time - hundreds of them! Switching between audio books takes several minutes and intense concentration, since scrolling is often beyond.

  2. with the touchpad, rewinding also takes a lot of time and concentration. It is a feature that I often need, because when I'm listening to foreign language files, or when I'm interrupted, I need to go back a few seconds.

  3. it cannot be used in your Pocket: the controls have no haptic feedback and are so sensitive that they get easily exploited to sit in a pocket. (Unlocking also relies on a visual feedback and takes time; so it cannot be used in any situation where you want to immediately respond to interruptions)

  Is it possible to get at least some of these features is back with an update of the firmware? I read somewhere that a firmware update improved navigation, but I already have 02.38_06A, which is later that I could find by Google for "sansa fuze firmware update site: sandisk.com.

  Most of your problems can be solved by installing Rockbox. Unlock, it's only a little faster with is (like everything else), you can program to automatically rewind each time that put you paused and has better file navigation (you can't even update the database if you want!). Rockbox also will give better performance of the battery. But beware: is not go back through the title!. If you don't like, you can also start the original firmware by pressing the Volume down when you turn it on.

  If you are interested, see HERE for instructions on how to install Rockbox (uninstall instructions can also be found), HERE for a PDF of the manual, HERE version for the HTML version.

  Other than Rockbox, the only thing I can suggest is a different player. Whatever it is, good luck!

• Someone help me please!, IE8 and Flashplayer. I loaded the version beta of Flashplayer, they said, would be to make it work, but I keep getting invited to load Flash Player. It does not work. Can I go back to IE7 and load the regular Flashplayer and remov

  I am running Vista Home premium, IE8, the latest version and after what Adobe says since I have problems with Flash Player. According to them, is not compatible with IE8, so they came out with this beta. It does not work! I am always prompted to load Flash Player for windows! Can I go back to IE7 and delete the others and the version beta and regular old flashplayer? Please help, that's all what I do perform, even Facebook is messed up because it requires flashplayer. But it seems that Windows does not recognize the flash drive I have loaded in beta. Does anyone know where I come from? I can also be reached at * address email is removed from the privacy *.

  Thank you very much!

  http://support.Microsoft.com/kb/957700

  How to uninstall or remove Internet Explorer 8?

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Try this:

  http://kb2.Adobe.com/CPS/141/tn_14157.html

  Uninstall Flash by using the uninstall program Flash Adobe link above.

  Flash is sometimes corrupted.

  http://get.Adobe.com/flashplayer/?promoid=BUIGP

  Reinstall Flash, after 1st unchecking / uncheck the toolbar Google download option there.

  All other questions: Contact Adobe.

  See you soon.

  Mick Murphy - Microsoft partner

• In my adf application, I use sequences, the problem that I face, is that this sequence break at 2:21 or three insertions. Any reason?

  Mr President

  In my adf application, I use sequences, the problem that I face, is that this sequence break at 2:21 or three insertions. Any reason?

  Concerning

  How can I correct this situation?

  Well, look at your definition of the sequence and correct

  There are CACHE 20 then change or recreate your sequence and use NOCACHE

  Dario

• Whenever I have cut an audio clip in my sequence, the source monitor freezes creating two of the same framework.

  Whenever I have cut an audio clip in my sequence, the source monitor freezes creating two of the same framework.  I then have to wait anywhere from five to ten minutes only for Panel source monitor back to normal to continue editing, with playback.  Itself doesn't freeze, I am able to go into my settings and change again within the sequence.  It's only the source monitor.  Anyone know this problem and is there a solution?  Thank you!  My apologies if this has already been discussed in another post.

  I am running on a processor intel i5 processor 4690 k, 16 GB of ram, all-new msi motherboard and 980 gtx graphics card nine.

  Under the key sequence, uncheck preview Composite during Trim.

• Re: Font book. I chose "restore standard fonts" by mistake. How to get back on my choice. The Cancel button is grayed out so I can't cancel it. Any suggestions? Thank you!

  Re: Font book.

  I chose "restore standard fonts" by mistake. How to get back on my selection. The Cancel button is grayed out so I can't cancel it. Any suggestions? Thanks in advance!

  If you click on 'Restore the standard fonts', fonts that are not included in the OS X systems is placed in a "fonts folder (deleted) next to the fonts folder.

  / Library/Fonts

• Can you is more middle - click on the buttons back and forward to open the most recent last/next page as a new tab?

  I use Firefox 26, and I remember at some point in the past you could middle - click on the buttons back and forward to open the most recent last/next page as a new tab. Now, it does not work. I have not changed anything else on Firefox I know works, so was it gradually as keyword.url or is this something else?

  ... OK, this is weird. I restarted Firefox in safe mode and the reworked for/back Middle-click, so I thought it was one of my modules. Yet once, I opened Firefox in normal mode... and Middle-click works.

  I have no idea.