Back to height of GroupItem selected

Similar Questions

• Airplay iMac switches back on computer after you select the apple tv. Why?

  From Imac display by selecting Appletv heard music lasts for a few minutes then switches to my computer. Why?

  Hello brianfromsooke,

  If you try to use your iMac, Apple TV AirPlay, but the audio output automatically switches to your iMac, it may not be the flow enough on your Wi - Fi network.
  

  If AirPlay disconnects itself, your wireless network can be too busy or have too many wireless interference to maintain the connection of the antenna. Learn how to solve the problems of Wi-Fi connectivity. The manual of your router network may have additional suggestions for maintaining a strong and fast connection with your devices.

  Use AirPlay to view a video of your Mac on a HDTV

  Sincerely.

• How can I select more than one bookmark at a time so that I can open and then several bookmarks - without the aggravation of back to the list and selecting and opening each one.

  My dozens of bookmarks, I often want to open 5 or 6 of them at the same time - maybe a couple of weather reports, a couple of radio stations, a couple of other Web sites. But I see no way to do this without laboriously find a bookmark, select it, opening the site, then return to the Favorites, find the second bookmark, select it, open the site and so on. There is probably a way for me to select several independent bookmarks, then open them at the same time. Thanks a lot for your help. Don

  Oh I see, when I read your question, my understanding is that you have Web sites that you are opening regularly you would like to open all at once. This is why I have proposed to create a folder with these specific bookmarks.

  However, your clarification, it seems that you want to open Web sites randomly here and there. So, essentially, you want to SELECT favorite sites and then open them at the same time.

  There is a way to do it. Access your bookmarks by clicking on the menu button drop-down orange Firefox (upper-left). It is:

  • Go to \Firefox\Bookmarks\Show all bookmarks;
  • Click on "Bookmarks Menu" (in the sidebar);
  • Use the CTRL key to select your favorite Web sites.
  • Right click and choose "all open tabs.

  It's always a bit laborious, but it's the easiest way, I could find, especially if you want to open several tabs at the same time.

• selection of the right Startup Repair boots me back to the screen to select reboot

  recently installed new graphics - no problem.

  has had to unplug my dvd player because the sata power cable is not reached. I bought a 4 pin sata converter plug in.

  Since then, I could not get into windows.

  But first, the computer would send signals to my monitor, no matter what I plugged. I have corrected it to mount tension on my diet, turn it off and set the voltage to normal... (no idea how it's fixed).

  I can get the boot screen/bios work, but then I get to the "was turned off during startup.

  start the system restart or start windows normally. If I get the startup repair it turns black for a second, and then I'm right back where I started at the same screen. If I choose start windows normally the loading bar appears and then the screen goes black.

  the first time I got it to start it says something about something not and he comes back at slow speed of DRAM. Not entirely positive, but something in this direction. I googled those terms out of memory and found it could be DQS training, but I have not overclocked or touched something like that.

  also, I had to turn my computer on and off a lot until I could get the monitor to work, so this could be a factor in this.

  on Vista 64 bit. Gateway dx4200

  just tried to get into the boot screen, safe mode requires the computer to restart.

  Thank you.

  don't know what happened, but it works again...

  Admin can mark it as resolved.

  Hello

  First thing to try is placing it back as it was before any change. Don't forget to reinstall the cards memory.
  and cables that you may have dislodged something. Which includes the removal of the video card for the test.

  If no joy then you no doubt using a computer store real (not the leeks and glances at a Best Buy
  or other stores) or Support technique Gateway.

  Check with the drivers, documentation online and Support technique Gateway.

  Gateway drivers and downloads
  http://support.gateway.com/support/drivers/dlcenter.asp

  Technical support Gateway
  http://support.gateway.com/support/?cmpid=topNav

  Door Documents
  http://support.gateway.com/support/SUPINFO/index.asp?cmpid=topNav

  I hope this helps and happy holidays!

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Why the app for iOS is not a 'back' button? You must select the House then my documents all the time just to open another form of file in this folder. If there is a back button that would save a lot of time for iOS users.

  Hello

  Comes from Acrobat Reader for iOS 15.1.0 version which includes support for a previous button in the top bar.

  Do you want to give it a try and tell us what you think?

  Thank you.

• [CS6] Select the block of text with a certain height and move it to a specific location?

  I have a bunch of labels on page that I need to move. All these labels are the same height (0.125 in.) so what I think is that a script could go on each page and find the article on this basis, select it, and finally, move it to a specific location of XY with a right anchor point. It would be very difficult to do? I think it would be a rather simple script.

  Thanks for any help you can give!

  No problem getting the height of a selected image and looking for images with the same height. Here is a sample script:

  (function(){
  
      function frameHeight (frame) {
          var gb = frame.geometricBounds;
          return (gb[2]-gb[0]).toFixed(3);
      }
  
      function moveFrames (h) {
          var pItems = app.documents[0].pageItems.everyItem().getElements();
          for (var i = pItems.length-1; i >= 0; i--) {
              if (frameHeight (pItems[i]) === h) {
                  pItems[i].move ([0,0]);
              }
          }
      }
  
      if (app.selection.length > 0 && app.selection[0].hasOwnProperty('geometricBounds')) {
          var h = frameHeight (app.selection[0]);
          moveFrames (h);
      }
  
  }());
  

  This move of the elements on the page with the same height as the photo selected to the top left of the page. See the move() command line 12. You can substitute your own coordinates [0,0].

• Sort groupItems Array using the left coordinate of visible limits?

  Hey all! It's been a while, but I'm back with some more busters of brain for you guys.

  I'm trying to re - work a script that Silly-V wrote to me. The goal is to create a work plan around each group of a document element in the order of the top left corner to the lower right (as if reading a book). (ultimately I would like to add a provision that excludes the possibility of having a work plan contained by another work plan, but it is a luxury that I can try to find later).

  Silly script works very well and does exactly what I need... about 60% of the time. The problem comes when I have an item that contains a clipping mask. Since work plans are created through groupItem.visibleBounds, Illustrator assumes that the invisible work that extends beyond the clipping mask is visible and creating a work plan that is too much.

  His version pushes the visible boundaries of each groupItem in an array, then sorts the visible boundaries of the left coordinate, then pushes this sub-table in another table and at the end, to coordinate kinds berries vertically at the top... However, I'm looking to push the real groupItems in the table instead of just the visible limits. So I would like to sort the groupItems by their visible limits table and then I have the opportunity of either by creating work plans based on their visible limits or (the possibility of) loop to make each groupItem selected = true and using the fitArtboardToSelectedart() command.

  I'm stuck on how to sort the groupItems table based on the visible limits... Here's what I have so far:

  my inclination is to set a variable to the visibleBounds of each groupItem in temp (which seems like it would need a loop), but it's not supposed loop me XIRR...? There is something really big, I'm missing here, but I can't wrap my head around it.

  Thanks for any help!

  function organize(){
    var docRef = app.activeDocument;
    var layer = docRef.layers[0];
    var groups = layer.groupItems;
    var currentRowMarker;
  
    var groupList = []; //array of all groupItems
    var sortedGroupList = []; //array of subarrays sorted by visible bounds
    var temp = []; //temporary array for the current row of groupItems. sort this array from left to right first, then push the entire array into "sortedGroupList"
  
  
    //populate groupList
  
  
    for (g=0; g<groups.length; g++){
         groupList.push(groups[g]);
    }
  
  
    //set currentRowMarker and compare rest of groupList to top coordinate of visible bounds. push true results to temp array.
  
  
    for (t=0; t<groupList.length; t++){
    temp = [];
    currentRowMarker = groupList[t].visibleBounds[1];
    temp.push(groupList[t]);
    groupList.splice(t,1);
  
         for (c=0; c<groupList.length; c++){
              var currentGroup = groupList[c];
              var vB = groupList[c].visibleBounds[1];
                   if (vB + 20 > currentRowMarker && vB - 20 < currentRowMarker){
                        temp.push(currentGroup);
                        groupList.splice(c,1);
                   }
         }
  
    //this is where i'd like to sort the temp array
  
    sortedGroupList.push(temp);
    }
  }
  organize();
  

  Thanks for your help, Vassili.

  I've been unable to get your suggestion to work, does not mean that it was an erroneous suggestion. So I decided to go the more complicated route. I hope that I can learn about why your suggestion did not work for me in a subsequent attempt.

  I am sure that this isn't the most elegant way to perform this task, but it was the only way that makes sense to me. Here's what I ended up with:

  for (s=temp.length; s>0; s--){
    var placeholder = 0;
    var farthestLeft;
    var deleteIndex;
         for (a=0; a		   

• where is the old menu back drop down?

  I've just updated to Firefox 8. There used to be a drop down menu option next to the 'back' button, which allows you to select more precisely where you want to go back, for example. If you wanted to go back several pages, then rather than click on back, back, back constantly, you could simply select the page in the menu. It was very convenient if you were unsure of how far forward you would come from the page you wanted and saving time.

  This function does not seem to be part of the new Firefox, but I used frequently and he would like to return. Is there a way I can add to my new taskbar?

  You can thus by do a right-click on the back or next button, or click and hold on the back or the next button until the list up.

• HP Photosmarts 7520: printed paper back in the printer before finishing

  Lately the print when I print a document arrives at halfway of the printer, and then it goes back into the printer. The window says 'let dry ink '. The printer has an error message but when I click on the red X on the window, completed copy will come back. No idea why? Just started doing so a week ago.

  The printer will back the paper to print on the back if "Duplexing automatic" is selected.  Check the settings of the driver.  What is the error message?  The troubleshooting steps described here can help solve if there is a paper jam message.

• I have a piece of test equipment that is not compatible with Windows Vista 64 - bit edition. Is it possible to go back to the 32-bit version without having to re - install?

  The test equipment is a Site Master S820D used for the test of microwave signals.  It is not compatible with Windows Vista 64-bit, but is with Windows Vista 32 - bit.  Want to know if there is a way to get back to Windows Vista 32-bit, without having to buy a new operating system.  The program is called "Site Master Handheld Software Tools".

  Hello

  If you want to move from a 32-bit version of Windows to a 64 bit version of Windows Vista, or vice versa, you will need to back up your files, then select custom during installation of Windows Vista. Next, you need to restore your files and reinstall your programs

  Use the links below.

  Installation and reinstallation of Windows Vista

  http://Windows.Microsoft.com/en-us/Windows-Vista/installing-and-reinstalling-Windows-Vista

  32-bit and 64-bit Windows: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/32-bit-and-64-bit-Windows-frequently-asked-questions

• How to make a backup set full of files that you selected (in Windows 7)?

  If I click on 'save now' in Windows 7 will do a backup full of selected files?

  I've finally found out of backups scheduled in Windows 7 because I could never determine what was a 'set' as there are has no indicators.

  So the question is: in the future, I just want to complete backups of all the files I've selected every time I want to (since I still find the options for others) to perform a full backup what I do in the backup and restore window?

  I'm sorry to say this, but the function of backup on Windows 7 is one of the worst I've ever seen - taking control of the user for what type of backup, they are done but never explain what is contained in a 'set '.   "Windows periodically make a new backup set...". ', they say.  Really? When? Why do I see a game with 250 GB, a second 'package' with 35 GB and when I click on 'save now' the file was 197 GB?  What is contained in these 35 GB?  Incremental?  Differential?  The secret of the Dead Sea Scrolls?

  I'm not the first user to this problem, that is why users will third-party backup programs.  But it amazes me that MS cannot go down this basic procedure and explain it to the user.

  Backup programs work very well with the following options:

  Ask the user if they want to (1) create a 'complete' backup of the selected data, (2) create a "premium" with the files changed, or (3) "incremental" with the added files.  Indicate what kind of file the user seeks to him once it was created.  Is it so difficult?  .  In an attempt to "dumb down" the process there desperately ready to confusion with the result that if you delete a 'set' to clear a space not sure what you are deleting - very dangerous.

  If the user wants to simplify and give software MS control software HAS yet to tell them what a 'set' is and what it contains. (full/differential/differential)   Otherwise, you cannot delete all files or sets for fear of erase something essential.   And you won't find until you crushed.

  Hello

  Windows Backup allows you to make copies of data files for all people who use the computer. You can let Windows choose what to back up or you can select individual files, libraries, and drives that you want to save. By default, your backups are created on a regular basis. You can change the schedule and you can manually create a backup at any time. Once you have configured Windows backup, Windows keeps track of the files and folders that are new or modified and adds them to your backup.

  Reference items to learn more about this topic.

  What backup settings should I use to maximize my disk space?: http://windows.microsoft.com/en-us/windows7/what-backup-settings-should-i-use-to-maximize-my-disk-space

  Back up your programs, system settings, and files: http://windows.microsoft.com/en-us/windows/back-up-programs-system-settings-files#1TC=windows-7

  Backup and restore: http://windows.microsoft.com/en-us/windows7/products/features/backup-and-restore

  Response with the State of the question and we will be happy to offer you our help.

• The color range selection

  Hello world

  Can someone please clear up a problem I'm having with Photoshop. I start as I am a student of PS early.

  When I try to adjust the color of a portion of an image, I create a hue/saturation layer and then go to the layer mask tab and click on the color range.

  I noticed two things:

  1. when I try to go back to the color range selection after OKing an adjustment... my additions will not be displayed in the mask. Is this normal?

  2. I can not activate the color range if I invert the mask first. The mask must be white, until I click color range for any selection is visible. Is the right one?

  I have glitches with PS or is this normal?

  Thank you

  Daniel

  If a couple of things here.

  Based on your details, I can recreate the same question. If I have a H & S adjustment layer, use selection > color range to create a selection in this adjustment layer mask. But if I try to apply new range to select a color, it blackens my just mask or does not apply a update for the mask area. It seems that you have to actually reset the white mask.

  So, I don't think that your system is glitching. It's just how this tool works. But I'm curious to what you do that drives this workflow. If you need convert/adjust a color, you can select this color spectrum in drop-down setting H & S layer options from the master to a specific hue. Then use the pipette to the left to select the color you want to change. That align with the value of the color you want to adjust in the sample interval. Now, move the Tint slider, and this should change. Now, what you do not want to change, just "dab" try it with a black brush on the layer mask to the value adjustment.

• jQuery/Ajax - images in the list of a folder in the select tag / option

  Trying to grab an image list to a file and loop through them to create a list of < select > < option > using ajax. Found this piece of code while Googling for a solution that gets the job done (I added to the click event as I want the list update/upgrade to update if a new image is uploaded to the folder without a page re - load) BUT of course the result is that the code adds the same image on each click names, so I find myself with several images with the same name in the list!

  {$(document) .ready (function ()}

  {$('.product-images').click (function ()}

  $.ajax({)

  URL: "pictures."

  success: {function (data)}

  $(data) .find ("was: {contains (.jpg)" "}") .each (function ()})

  make a loop through

  var images = $(this) .attr ("href");

  $('<option_value="'_+_images_+_'"></option>').html (images).appendTo('.product-images');

  });

  }

  });

  });

  });

  < /script >

  Gets above the list of images in a folder named "images" and added to the below:

  < select name = "product image" class = "product image" >

  < option > select picture < / option >

  < / select >

  What I need, is to stop the same image names added every time you click the < select > tag.

  Someone at - he tried to do this before and has a solution?

  I can add the list once but if new images added to the folder and then they don't show up until the page is re-rested.

  Operating system

  What I need is to stop the same image names added each time that thetag is clicked.

  Your current code is that, with each action click the product images selection list. If I understand you correctly, you only want to add at the start of the images to the list of selection of product images. You can do this when the page initially loads by omitting the click event handler in your code in place. Or you want to initially load current images of the file and automatically load the new images to the list of false real time via ajax call? One way to do it via ajax is not to add to what is already there, but to 'rebuild' the selection at each click event list. Users might lose if they click, click, then click on back to a list of selection, as well as items from the selected list previously. Or you could store image names in a database and execute queries to the Database via ajax call to ensure that records duplicate is not appended to the list if they were already annexed during subsequent calls to ajax. The logic of programming for this scenario is quite simple.

  I can add the list once but if new images added to the folder and then they don't show up until the page is re-rested.

  To get new images (or data in real time by the way) to instantly load in the page is a named term responsive development in applications of node. Watch for more information. Loading new data into a fake outlet via ajax call will be processor intensive and taxation for the customer. There are lots of calls from application/waitforresponse on the server when you use php/ajax, which would be very tax when this method is scaling. Using Sockets open through an application node would be the best approach for something like that.

  best,

  Shocker

• Selection tool issues

  I have problems with the Selection tool on an ellipse shape. I mean resize a circle, forced to anchor to the left. When I fly over the strewn right anchor a little oval appears next to the selection tool which then requires me to restrict to the Center. I need it's off. Also, I discovered that if I compensated a circle, these options are disappearing.

  

  It is a feature of newly introduced bug. Ellipses are now living forms by default. To change back to a regular form, select object > shape > expand your form.

• Action, select the whole width, regardless of the width?

  Hi everyone, this is probably not possible! But it is there anyway to tell photoshop to select an area that is the width of the image regardless of what the width of the image is?

  I perform an action on a batch of images that puts a bar of color at the bottom and then adds text to the subject. As I do this, I make a selection, fill it in, add text and Center it in the selection. Then flatten it all, save it and close it. I downloaded an example. (this photo is on the internet not actually one of mine!)

  The problem is, it only works if the images are the same width, but sometimes, annoyingly, I have images of different widths, that I want to execute the same action/text on. In this case, I currently do a separate action for each width of the image. It's embarrassing! What happens if you could tell Photoshop to select 50 pixels down quite down regardless of the width. That could save me a lot of time!

  copy the code below and save it as a text file with the .jsx extension. Save in subfolder of Photoshop: Presets\Scripts. Restart PS. run this script in your action for the establishment of the selection.

  #target photoshop
  
  var prefOld = app.preferences.rulerUnits;
  app.preferences.rulerUnits = Units.PIXELS;
  var doc = activeDocument;
  var selectArea = [[0,0],[doc.width,0],[doc.width,doc.height-50],[0,doc.height-50]];
  doc.selection.select(selectArea);
  app.preferences.rulerUnits = prefOld;