back up windows update.

Similar Questions

• Because Windows update (13/08/15) I can not install a toolbar on Firefox Robo

  I have been using RoboForm for years without problem. However, last night, I ran the last Windows Update and this morning I had no Robo toolbar on my Firefox. I tried to uninstall and reinstall Robo and still no toolbar. I ran the restore windows at 08/08/15 and there was the fully functional toolbar. I went back to windows update and had the same problem again.

  The toolbar may be hidden or the add-on is no longer compatible with Firefox. You right-click at the top near the address bar and to activate a specific toolbar. You can also check your list of Add-ons to see if it is listed as incompatible. Please note that you do not use beta, not everything may work correctly.

• Software new Windows Update 80073712 error code

  I go to Windows Update to install updates and I click to install the new updates then it say I need new Windows Update software and then I click to install the new software and then it goes back to Windows Update and I click to install the updates and then he says: I need new Windows Update software again. I kept this operation and it kept looping until it has detected an error. The error's 80073712. The PC is a laptop Dell Inspiron 1525 and came with Vista Home Basic.  I tried almost everything to fix the problem.  Still, the computer runs my programs and can get on the internet, but I want to be able to update my computer through Windows Update.  What should I do?

  zednanref,

  Try http://support.microsoft.com/kb/931712

  or

  next step - free application incident support for Windows Update:https://support.microsoft.com/oas/default.aspx?gprid=6527

  Please report back so he can help others who have the same problem as you.

• I've corrected the 10 Feb Windows update BSOD issue. What to do next?

  Like many others my infographic died with a BSOD after the windows update Feb10th. Returning the suggested KB977165 had no effect, but fortunately after returning all the updates, my computer is back to life.
  I have now a computer with windows update disabled with an update waiting that I suspect is causing the BSOD again if I turn on updates.
  The various forums etc I found will tell you how to recover your computer on but none that I have found tell me if I can go back to windows update or how carefully remove any update caused the BSOD.
  I haven't tried the "no support for Windows Update problems" for an answer and gave with an automated response telling me to try here.
  Can someone please point me to a 'next steps' to recover completely from this?

  I've heard reports of infected, media files cj. The two movies and songs that have been downloaded through Limewire.  If I hear anything else about it, I will be sure to post it here. All the protection we use still depends on who is using the keyboard or mouse click.

  Suggest that you scan the system with Malwarebytes anti-malware , too.  Download the free version, install and allow update when installed.
  Then click on the button scan and use the default quick scan setting. Once the scan is complete click on the button to display the results.
  If sure all detected object is checked and then click on the button select Remove.
  If nothing is detected, I would start the system into safe mode and do a Full scan, too. It will take time to finish but worth it.

  One way that you would be able to be almost certain to 100% that you have detected and deleted all the bad creatures is to shoot on the hard drive, install it as a slave on another system and then scan the HD active.
  Or you can create a BartsPE or Linux boot cd and the scanner without having to shoot HD.

  Anyway is not elegant, to say the least, and not give the same level of confidence you would have with (ugh) formatting and reinstalling.
  MowGreen Services consumer safety update

• KB2633880 - KB2518864 - KB2572073 installed, but not "seen" by Windows Update

  KB2633880 - KB2518864 - KB2572073 installed, but not "seen" by Windows Update

  Today (Tuesday 22 may 2012), after seeing the yellow icon in the taskbar, I ran Windows Update and KB2633880 - KB2518864 - KB2572073 successfully installed, I turned off the PC by clicking on the red icon Turn Off with a shield icon, expected for all 3 updates to install, 4-color and for the PC to stop itself. It took a while, but everything went well. No error message.

  After turning on the PC, I went back to Windows Update and was surprised to see Windows Update suggests to install... KB2633880 - KB2518864 - KB2572073 which is the same three components I have installed successfully.

  I ran Microsoft Fix It that 1 issue (update of Windows components needs to be repaired (next line) repair of components Windows Update.) I clicked Next. Everything went well. I had a green check mark 'Fixed '.  I turned off the PC (without having to install 3 updates which I have already installed).

  I turned on the PC and went to Windows Update, asking me to install KB2633880 - KB2518864 - KB2572073. It's like Windows Update does not "see" that these 3 elements have already been installed.

  Note: I have the same problem on another PC. The two PC XP SP3 and are stand-alone PC. One is a desktop computer. The other laptop.

  Hello

  I suggest you follow the troubleshooting steps form the article and check if it helps.

  Windows Update or Microsoft Update repeatedly offers the same update

  http://support.Microsoft.com/kb/910339

  Registry warning

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/)

  How to back up and restore the registry in Windows

  When you disable Antivirus:

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

• Disable the upgrade to the latest version of Windows through Windows Update.

  I am running Windows 7 Home version.

  In Windows Update, how do I remove the upgrade option to Windows 10?

  Thank you!

  Hello

  What you need to do here first, is to change the way you receive updates. The automatic updates enabled, the operating system will reinstall the nagware guest who is KB3035583 after uninstalling a step we will take in a minute.

  Then follow these steps:

  1. Right-click the icon of the center of the Action on the taskbar and go to "Windows Update".
  2. In the left menu, click on "change settings".
  3. Change automatic updates to "download updates but let me choose whether to install them".
  4. Click "Save Changes", then "Control Panel Home".
  5. Go to "Programs and features" and click on the link "View installed updates".
  6. Copy and paste KB3035583 in the high-field search right and when it appears below, right click and select "Uninstall". It's a great Setup uninstall can last several minutes.
  7. Then restart and then go back to Windows Update again.
  8. Since you now have different parameters of WU, click on the link if there is no waiting for your approval, which will bring you to the menu where you can decide what to install.
  9. If you see KB3035583 in the list, right click and select "hide update". The box you should checkmark to select an update will turn gray and when you exit WU, these files will be sent in the repository called "Restore hidden updates". You can restore the updates that have been hidden there at any time by clicking on the link, make your selection and click "restore".

  The next step is to edit a registry that will prevent Windows 10 download and installation.

  Press the Windows key + R to start the command run, type: regedit , and then click OK.

  Navigate to: HKEY_LOCAL_MACHINE--> SOFTWARE--> Microsoft-->--> CurrentVersion--> WindowsUpdate Windows--> AutoUpdate--> OSUpgrade

  Click the OSUpgrade key (which looks like a folder), and then in the right pane you should be able to see the four values respectively called:

  AllowOSUpgrade

  KickoffDownload

  KickoffSource

  OSUpgradeInteractive

  Part or all of them will have a value of 1. You need to change those to 0 as you see in the screenshot.

  

  To change a registry value, right-click and go to Edit. In the value field below, transform figure 1 0 a

  Click OK and Windows will add the 0x00000000 (0) itself.

  If it's already a 0 then you don't have to touch it.

  In addition, you must create a value. To do this, right-click on an empty part of the right pane, and then choose new DWORD with the name DisableOSUpgrade-->.  Windows will add REG_ DWORD early, after it is created.

  If inadvertently, you lose the highlight when you create the new value, right click and select Rename.

  Then, right-click of your new value and go to edit. Change the 0 value in a 1 in the value field. Click OK to confirm and exit.

  Reboot, then go to Windows updates. You will now be able to install updates 8.1 without being hassled by Windows 10.

  Credits:Xircal , from here

• Failure to configure Windows Update

  Hi rich,

  Sorry to know the steps of troubleshooting force worked for you.

  Please follow these steps and continue with the next steps to reset the Windows update components.

  Use the System File Checker tool to repair missing or corrupted system files

  http://support.Microsoft.com/kb/929833

   

  Follow the steps below to install the selective Windows Update:

  Follow these steps we will know what update is a problem and we will try to solve the problem on the basis of that.

  1. Go to control panel-> Administrative Tools-> Services and scrolled down to find the "Windows Update" service and stop it.
  2. Then restart again and go back to Windows Update, it will display all the current updates available. You must deselect all updates and select only the first two and install it, must be installed successfully (reboot required).
  3. After the reboot, chose two more and install. Then choose 5 updates and install them. That must be installed successfully (reboot required).
  4. The restart will take a long time. You can see "Configuring Windows updates" for about five minutes. After the restart, select the remaining current updates, including an update of the driver in option. They must install as well successfully (reboot required).

  Hope this helps, get back to us if you need further assistance for Windows.

  Shrinkar,

  I did those batched updates since last week. It works for most, but I've only had a left which is take back me to the "failure to configure...". ». It starts at 30% and after it configures the windows updates, but as soon we get 67% to 100% then "failed to... set back changes...". "appears again.

  BTW, this is the windows update try to configure for ages

  

• Windows Update stops to take back me to the restore point

  Windows Update stops to take me back to restore point windows 7

  Problems with installing updates
  http://Windows.Microsoft.com/en-us/Windows7/troubleshoot-problems-with-installing-updates

  Open the Windows Update troubleshooting tool
  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Update-Troubleshooter

  TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• DNS server error that always brings back us to windows update erros trying to get on the internet

  Vista - hate him. I spent hours on the phone with a brand new computer that Toshiba with Vista 64-bit Edition Internet will stop working with the DNS server unknownerror. Sometimes reboot help but with all Windows update he internet is a luxury. Internet connection is perfect, perfect bc other laptops in the House with no problem, router, no viruses etc., computer - fine tooth - comb nothing.

  Take each OFF download windows update and work until updates again and then started barking at me, something is missing like its updates! Can't very well what update is screwing the connection or networking or a framework-Silverlight is always suspcious to me also.

  My icon for internet splits in two and shows as a #2 without asking confirmation except for a mysterious update. Access: Local and Internet. Symbol of the Internet will be turned off and will not ever look like disconnected until you try to connect.

  That's why people are going to Apple. Windows will not help or is somewhere secret and accept just your visa and mastercard and so what still you? Vista I can't update and no security.

  Toshiba is not very user-friendly, that is toward the back, they discovered Windows was the question. Isn't our problem, said - even if we're stuck with Vista with their product!

  I'd love to hear if someone has SIMILAR problems or if anything that I did not have tried! Thank you very much.

  Signed. Never buy new windows - toshiba on my list too.

  Hi begodsbutterfly,

  Welcome to the forum of answers windows vista.

  We are sorry for the inconvenience that you had to go through. I have some steps you can try to solve this problem.

  Try to check in SafeMode with Networking if the same problem occurs. To start in safe mode with network, restart your computer and press the F8 key for about four to five times. You will see the window options of safe mode with network in rated advanced. Use the arrows on your keyboard to select Safe mode, and then press ENTER.

  Please check if you get the error in safe mode with network.

  You can also try a system restore to the date when the computer was working fine.

  To do a system restore, please follow the steps below:

  1. click on start to reduce this includes this image, type systempropertiesprotection in the Search box and press ENTER.

  Reduce this includes this imaIf that you are prompted for an administrator password or a confirmation, type the password or click on allow.

  2. in the System Properties dialog box, on the System Protection tab, click System Restore.

  3. in the System Restore dialog box, select choose a different restore point, and then click Next

  4. Select the restore point that you want to use, and then click Next.

  5 confirm your restore point and then click Finish System Restore restores the selected Windows Vista configuration and then restarts the computer.

  6 log in the computer. When the restoration of the system of confirmation page appears, click on OK.

  The system restore article is:

  http://support.Microsoft.com/kb/322756

  I hope this information is useful.

  Please let us know if you need further assistance.

  Concerning
  Rehman - Microsoft Support

• back to IE7 - now can't run windows update

  after upgrade to IE8 xp svc pack 3, system was extremely slow. back to IE7, now system works much better. tried to update windows and could not do because activeX controls blocked me. What can I do?

  Hello

  1 How are you sure that the activeX controls prevents you from installing Windows update?
  2. what exactly happens when you try to perform the system restore? If you receive an error message then, send the same return.

  The following article might be useful: How to troubleshoot common Windows Update, Microsoft Update and Windows Server Update Services installation issues

• WINDOWS UPDATES AUTOMATIC @ SHUT DOWN MODE AND THEN MY COMPUTER IS NOT WORKING WHEN I TURN IT BACK

  Wow, I thought that I already asked the question. ??? I recently re - set up my old computer from last year. Everything went well on it. All my programs, files, photos, email and internet wall works very well. I went to shut it down and Windows Update popped up indicating not to touch or power off the computer turns off automatically after Windows updates were installed then... There were 22 updates installed by Windows Update and the computer is down. I waited for 6 or 7 minutes and turned on my system back to see nothing load, my monitor screen educated on and said to go to sleep! If someone can tell me what Windows has done to my system. Why they ask me to pay for something that they obviously screwed and how to contact a live person who can help me with their question? PLEASE, ANY HELP IS GREATLY APPRECIATED. MY NAME IS ELIZABETH AND I CAN BE CONTACTED AT 228.385.0336. Thank you very much!

  Hi Elizabeth,.
   
  Check if the fix given in this link will help you in fixing the issue:
  The computer leaves not put into hibernation or does not Wake-on-LAN mode ensures
   
  I also suggest you to follow the steps in this article and the Coachman.
  How to solve the problems of hibernation and standby in Windows XP
   
  For more information on phone Microsoft support option, see:
  Support for Windows XP technical issues and troubleshooting

• I cannot use windows update. The 80070490 error keeps coming back.

  I cannot use windows update.  The 80070490 error keeps coming back.

  I tried "System update tool", "windows repair" and I don't seem to be able to get upgrades using my DVD of windows.  What can I do?

  Any help would be much appreciated

  I cannot use windows update.  The 80070490 error keeps coming back.

  I tried "System update tool", "windows repair" and I don't seem to be able to get upgrades using my DVD of windows.  What can I do?

  Any help would be much appreciated

  Reset your Windows with this FixIt components update:
  How to reset the Windows Update components?

  Reset.

  Try to update.

  If it still does not work, try this...

  1. Start an elevated command prompt.
  2. Run the following commands pressing on enter after each line:
     
     net stop wuauserv
     CD %SystemRoot%\System32
     Ren C:\Windows\SoftwareDistribution SoftwareDistribution.old
     net start wuauserv

  3. Reset
  4. Try to update.

  * Important * When you do this, the following problems occur:

  • Updates that are currently downloaded but which have not yet been installed must be downloaded again by using Windows Update or Microsoft Update.
  • When you remove the Software Distribution folder, your download history is deleted.
  • If you currently receive updates from Microsoft Update and Windows Update, you will need to reselect this option from the Windows Update Web site.

  
  * Note * if the problem is resolved and you can successfully download and install the updates, you can delete the directory SoftwareDistribution.old to recover disk space.

  
  STILL no? We have something to try...

  Use this FixIt:
  How to get the latest version of the Windows Update Agent

  Reset.

  Save components WU:

  1. Start an elevated command prompt.
  2. Run the following commands pressing on enter after each line:

     regsvr32 Jscript.dll
     regsvr32 c:\windows\system32\wuapi.dll
     regsvr32 c:\windows\system32\wuaueng.dll

  Reset.

  Try to update.

  If it still does not work after that - repeat ONCE more that part...

  Reset your Windows with this FixIt components update:
  How to reset the Windows Update components?

  Reset.

  Try to update.

  Come back and let everyone know how you faired.

• Windows Update causing screen to go back and request for boot disk

  laptop Windows 7 Home premium.  When I get windows updates, they eventually turn off my computer, and then restart.  Happens to the password acer page, and after he typed my password, instead of windows startup, which normally, it is used to do the same with the updates, now it turns off the computer and comes back with a back screen, type, then at the end of it, it says to insert a boot disk.  How can I prevent this from happening. Why not just open windows as it used to do?  (if I remove the battery from the laptop and it stops completely it will finally boot normally and go to windows, hense I am able to write this, but I don't want to do all of this to return to windows.)  Thanks for any help you can provide.  TJ

  Hello

  I suggest to refer to this link and follow the instructions in the link below and check, if this can help:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  It will be useful.

• Windows Update comes back with windows is underway

  Original title: update windows windows vista,.

  I have windows vista, I have windows select update and it comes back with windows is current, but this has been ongoing for more than a month.  I don't think that the update works correctly

  Hi DanielSkees,

  1. are you encounter problems with this web address?

  2 are you able to access the IE9 Web sites? Your IE 9 works well?

  You can read the following article and try to reset the Windows Update components and check.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  You can also check Windows update to installed updates history.

  See the Windows updates are installed

  Hope this information is useful.

• After you have installed Windows 10 (don't like it) and go back to Windows 7 Home premium, impossible to get the Windows Update to run.

  After the Windows 10 update (don't like it) and go back to Windows 7 Home premium, impossible to get the Windows Update to run.

  Sorry, but KB3153199 has replaced two times at the same time. It takes the new version of the Windows Update client to correct known issues.

  http://support.Microsoft.com/kb/3161608

  Manual installation requires a continuous search to be interrupted. The value of the automatic updates to "never check updates" and then restart Windows.

  Best regards, VZ