backs up all blocks of logic control validate the database

Similar Questions

• Change of control of the database grid control

  Client ask us to change the grid control to the control of the database.
  The database is located in the windows 2003 server system.
  1. stop the ORACLE agent service;
  2. order entry "emctl start dbconsole", it pops up the message "the service name is invalid.
  3. I try to recreate the dbconsole.
  EMCA - deconfig dbcontrol db-rest drop
  then we stock in the fall of the EM.
  
  Could help them about this?

  Yes, you can always go back to the old situation of:
  Drop the dbcontrol repository
  Start the agent, if it is not already running
  Add the (GC) database or use the agent: directory AGENT_HOME run agentca d

  Your not to go to dbcontrol would be:
  Remove the target GC
  Stop the agent on the server and remove the agent in GC, disable the agent service. Steps if you do not have ' t have any other DB on the server to be monitored by GC

  EMCA - config dbcontrol db-rest create if necessary deposit everything first: emca - deconfig dbcontrol db-rest drop

  emctl start dbconsole

  You may need a patch for dbcontrole according to the db version you are using:
  https://blogs.Oracle.com/DB/entry/enterprise_manager_database_control_configuration_-recoveringfrom_errors_due_to_ca_expiry_on_oracl

  Eric

• control of the database is in unscure mode

  Hi all
  I created a database in the version of Oracle 10.2.0.4 on windows platform.
  After you create the database, I received a warning that your control of database is in unscure mode.
  Well let me know is necessary to control databasae in safe mode.
  Thank you
  REDA

  Hi reda,.
  The thread below is having answer to your query:

  Error to ensure control of the database from the DB Configuration Wizard

  Best regards

  Rafi.
  http://rafioracledba.blogspot.com/

• Control of the database no longer works

  Hello
  I just installed 11.2.0 DB on windows 2008 server (32 bit).
  Control of the database was working fine and the DB was working fine.
  
  I had to change IP address of the server and the name of the server.
  
  Now, when I click on the control of the database it fails. (the page will not open)
  
  Are there files in the database that I need to change?
  
  Thank you
  Laba

  Emeric wrote:
  Hello
  I just installed 11.2.0 DB on windows 2008 server (32 bit).
  Control of the database was working fine and the DB was working fine.

  I had to change IP address of the server and the name of the server.

  Now, when I click on the control of the database it fails. (the page will not open)

  Are there files in the database that I need to change?

  Thank you
  Laba

  . / emca - deconfig dbcontrol db-rest drop

  . / emca - create config dbcontrol db-rest

• How to know all queries executed by users of the database?

  Hi all
  I am new to Oracle. I created a database (version 10.2) and several users in this database. I would like to know how to record in a database table all queries executed by users of the database.
  Thank you.

  I would like to know how to record in a database table all queries executed by users of the database.

  activate SQL_TRACE for each session, but such an effort cost more than any advantage gained.

• Username and password - control of the database

  Hi guys,.
  
  I just installed Oracle 11 g Release 2 on my windows 7 64-bit OS, the installation went correctly. However, when I went to the control of the database, its request enter me username and password well I'm not what he was referring too. I need to create the user name and password if so where can I create it.
  
  Please help me it's urgent
  
  Thank you
  
  D

  Hello

  No..
  username to console 'em
  sys
  password that gave you intallation
  And connect sysdba

  If you want that the credentials of the host
  username
  Administrator
  password your password for the operating system.

  Hope this helps
  Daniele

• Control if the database and listener are running or not?

  Hello
  We have about 50 databases we manage. These databases have some alerts that send emails if storage space is less than 80 percent threashold levels.
  
  However, we have no alert if the database is down or if the earpiece is down. Most of the databases is on sun solaris or AIX running oracle 9i or oracle 10G.
  
  I'm going to the source code of scripts already in place. can someone direct me
  on how we can control if the database is in place and running and whether or not the given listener is running?
  
  Thank you.
  Guz

  Guz,

  You have 50 databases to manage, then should consider using the grid control and manage your databae of a centrailized single server.

  Concerning

• logical corruption in the database

  What is logical corruption.
  How this can happen in the data file, it is bound to caused due to the disc.
  How to avoid this problem.
  Is it possible to check this regularly. with a script to work... no idea what command how to... Dbverify will do.
  
  Good reading/url is more welcomed.
  
  Thank you very much.

  user642237 wrote:
  What is logical corruption.
  How this can happen in the data file, it is bound to caused due to the disc.
  How to avoid this problem.
  Is it possible to check this regularly. with a script to work... no idea what command how to... Dbverify will do.

  Good reading/url is more welcomed.

  Thank you very much.

  What is the version of db and the o/s? Where did you read the logical corruption of the word in the data files? As far as I know, data files get damaged physically only. Logical corruption is happening within the blocks, for example an index pointing to a rowid to null entry. I'm not sure that I came across any situation/reference stating this corruption for files as well. To check this, the best way is to RMAN that can do the job by simple commands.

  HTH
  Aman...

• ? How to pass data Grid control to the control of the database management

  Hello
  
  I installed the database 10g as a node of the grid. But now I want out of my database with the database control gird for control and management. Is there anyone made this bofore. How could I do to cope?
  
  Any help will be greatly appreciated.
  Thank you.

  If the repositories of grd control hosted on the same server
  then cd $OMS_ORACLE_HOME/sysman/admin/emdrep/bin
  $>. / RepMananger repository_host repository_port repository_sid-sys_password votre_mot_de_passe-drop in action (it hangs and unquiesces the database - it is but normal).

  Once dumped successfully, use following (check sysman /mgmt_view user exists or abandoned), also check mgmg_tablespace and mgmt_ecm_depot_ts exist or dropped).

  If configured on the server different (and all that)
  ==============================

  $ORACLE_SID set
  $> emca - config dbcontrol db-rest create and follow the direction

• Control of the database on Windows - gives error cannot find server or DNS error

  Hi all
  
  After the installation of 10g on Windows services necessary for my new db are running, earpiece is in place.
  
  But when I try to set up the database via http://pnclultraprd.corporate.mem.5500/em/console/logon/logon control
  I get "cannot display the page. Can not find the server.
  
  I did have this before on new facilities and I'm stuck.
  
  Any tips? Thank you, John

  I just noticed that you have un.5500 instead of: 5500 in your URL

• Control of the database

  Hello world
  I have Oracle 10 g installed on a Windows Server 2008 Standard Edition with Internet Explorer 9 and when I try a blank page directly from the server to open the database control appears with no information on it, so that the page never the page of connection to be able to enter my credentials and be able to manage my database.
  Can someone tell me if there is a problem with 10g and Explorer 9 or how I can fix this?
  
  Thanks in advance!

  PL see the links above - 10.2.0.3 is not certified on Win 2008 - you must install the 10.2.0.4 patch - then things may or may not work as expected with 10.2.0.3.

  If it is a business-critical system, then it would be strongly advised to buy support. If it is for personal learning, install 11 GR 2 version of the database

  http://docs.Oracle.com/CD/E11882_01/install.112/e24281/TOC.htm#BGBEEBAD

  HTH
  Srini

• Control of the database and the grid control

  Hello
  
  I installed Oracle 10 g DB and configure its control of DB. Then I added this database as the target of OEM Grid Control.
  
  My question is: after you add the database as a target for the grid control, be it still controlled by the DB control and the grid of the company control?

  It's good questiion Yes this will be monitor by both, please check both console and see

• Control of the database: do not send e-mail

  I use 10.2 on HP UNIX 11. My DB control is not send me email when alerts occur, for example, storage space is greater than 80% used. I put the mail server etc. in the installer, as although my email addresses. Whenever I click on "Test Mail", an email is sent. But no mail is sent when alerts occur. Alerts are diagnostic summary show, but e-mail is not sent, why?
  ?

  Don't have you set up your alerts in setup > methods of notification?

  (1) connection OEM as Sysman, go to--> methods of Notification settings and configure your server for outgoing (SMTP) mail and the test.
  2) go to--> General preferences, configure your e-mail addresses and test.
  3) go to target--> databases--> select one of the database
  (4) search for "metric and policy link settings ' and click on this link
  (5) close to the end of the Page you can see "space Tablespace used (%) "Metric.
  Default value for the warning is 85% and critical is 97%. You can change these valuse according to your needs.
  6) go to preferences--> rules
  (7) check the 'availability of the database and critical States' existing rules
  You can change this rule, or you can create like. Under 'Metrics' tab, find "Tablespace space used (%) "metric.
  Change this WOG and "States of gravity for which you want to receive a notification, select" as critical or warning.
  (8) under the label of "Methods", select this checkbox "send me a message. Then you will receive emails to email the sysman user identification.
  (9) prior to this step, you assume to have valid annex to the sysman users if not set schedules.

• lock all users in a maintenance of the database open to specific users

  Hello

  I need to write a script which locks all users except some mentioned users.  There is a problem most of my users db name is full. like 100, 101 102, you have to put "" to search for.

  Can someone help me with this?

  Kind regards

  Of course, just concatenate the ' ' in the same way:

  Select "change user" "|" "" USER NAME | "" account lock;' from dba_users where username NOT IN ('EXCEPTION_USER1', 'EXCEPTION_USERN'); "

• Username blocking which is held on the database at the time

  Hello

  Using oracle 11.2.0.3 and concluding that on sat morning (03:30 a table cannot be updated due to an exclusive lock.

  merge into the affected table.

  Nothing else, we are aware to access the table at the moment because of some process must be because of the ORA-00054 - busy resource.

  Is there a way that we can identify what caused the blocking / causing the lock - happenening each week.

  Thank you

  You get it in history, when you get the lock again and then query the table mentioned above.  In addition, to check any kind of blocking session problem use this query.

  Select b.session_id, a.SERIAL #, «blocker details» a.username

  session $ v has, dba_lock b

  where b.session_id = a.sid

  and b.blocking_others = 'block ';

  Concerning

  Asif Kabir