backup 0x80780028A error
It's been a while since I backed up PC Win7 and it worked then. I get the error msg backup error 0x80780028A; I have not checked the logs errors and no real ID program or a service that is problem. Can help you with solutions to get past this error because I'm desperate to do a full backup. Also the wrong system backup with the same error! Help, please! Thank you.
According to MS supports the problem because win7 not support readers who use a size of logical sector of 4 096 bytes. Older readers use a sector size physical and logical to 512 bytes, which can handle all versions of Windows.
http://support.Microsoft.com/kb/2510009/en-us
There is an update for windows 7 that solves a few problems with this new sector size, but the Windows backup is not one of them, as I've already tried with my system.
http://support.Microsoft.com/kb/982018
Currently, the only solution seems to be to use another backup solution or switch to win8
Tags: Windows
Similar Questions
-
Backup impossible error message 'memory of the ghost Ox8004231F copy '.
Original title: shadow copy
I tried all the suggestions and I can still do a back up message is memory copy ghost Ox8004231F what else is there to make
Hello
1. what operating system is installed on the computer?
2 have. what troubleshooting measures you tried so far?
3. you save on external storage or on a disk device?
4 are you using Windows backup and restore backup?
Method 1: Event logs are special files events important folders on your computer, for example when a user connects to the computer or when a program encounters an error. As soon as these types of events occur, Windows records the event in an event log that you can read by using Event Viewer
Reference:
What are the information contained in the logs of the event (Event Viewer)?
http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer
Method 2: This could be the Volume Shadow Copy service is not started.
To restart the Volume Shadow Copy service, see the following steps:
Note: You must be logged on as administrator to perform these steps.
(a) open administrative tools by clicking the Start button, click Control Panel, clicking system and Maintenance, and then clicking Administrative Tools.
(b) double click Services. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
(d) double-click shadow copy volume service to open the properties of the service
(e) click the Startup type list, click Automatic, under the status of the Service, then click on Start
(f) click on apply and OK.
Method 3: Scanner SFC.
System File Checker (SFC) scan will replace the missing or corrupted system files on your computer.
Use the System File Checker tool to troubleshoot missing or corrupted on Windows Vista or Windows 7 system files:
http://support.Microsoft.com/kb/929833
For more information about the backup, follow the link below:
Back up and restore: frequently asked questions:
http://Windows.Microsoft.com/en-us/Windows7/back-up-and-restore-frequently-asked-questions
-
I can't my system on a backup CD. I receive error 0X800703EE code and found no solution to this problem. (I saved in the past) before SP2) without problem. Any suggestions?
Hi lshields01,
I would like to clarify the following things:
(a) what is you receive the exact error message?
(b) you try to back up files or backing up the computer?
Ø make sure discs are writeable
O try to backup to an external hard drive or a CDs\DVDs in different handwriting.
Step 1: Disable security software, follow the steps mentioned below
http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
Note: Activate security software once everything is done.
Now, check if you can perform the backup.
If you cannot back up on any CDs\DVDs, then try step 2
Step 2: Uninstall and reinstall the drivers CD\DVD.
You must be logged on as administrator to perform these steps.
1. open Device Manager by clicking the Start button, click on the Control Panel, clicking system and Maintenance, and then clicking Device Manager.
If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
2. in Device Manager, look for DVD ROM drives, and then double-click the device name.
3. click on the driver tab and then click on uninstall the driver, and then follow the instructions.
Updated a hardware driver that is not working properly
Now check if the problem is resolved
Thank you, and in what concerns:
Ajay K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
-
I have a Lenovo Think Pad with Windows Vista. When I try to back up the computer, I choose backup and the location of tools accessory system configuration. Then I run a backup to start and identify a DVD RW as the location of the backup files. I click to start and a screen pops up saying
A file exists already (0X800700B7), and at this time it cannot be saved.
OX800700B7 is not a file name. It is an error code.
What follows is a response to the same problem. The person who had the problem was using 64-bit. But that makes no difference in this case. Follow th step by step posted by ABC_george and see if that fixes the problem.
-
Backup issues: error 0 x 80042308
I use the backup and Restore Center of Vista to automatically back up my files to an external hard drive. He worked all night until last night. That is to say "the specified object is not found (0 x 80042308). How can I save?
Are there only registered at the same time in eventvwr VSS errors. The 80042308 error means VSS_E_OBJECT_NOT_FOUND. Try the following
Check the following registry
\Inp HKEY_LOCAL_MACHINE\SOFTWARE\Classes\CLSID\ {FAF53CC4-BD73-4E36-83F1-2B23F46E513E}
rocServer32What is the display of the key eventcls.dll or es.dll?
Unregister and re-register components by running the following from the command prompt
regsvr32 /u eventcls.dll
regsvr32 /i eventcls.dll
regsvr32 /u es.dll
regsvr32 es.dllNow try your backup again. I hope this helps.
-
Backup has never worked: getting the error code "failure 0x8000FFFF catastrophic."
CHKDSK suggested repair does nothing
Hello alandollwill,
I have included a link below for this specific error. Please let us know status.
Microsoft KB:
http://support.Microsoft.com/kb/973558
Thank you
-
sysstem backup problem error code 0 x 80041321
Attempt to perform a copy backup on an external hard drive. When we do the error code appears immediately.
Hello
see if this information helps you
How to make a backup of your data
http://www.vista4beginners.com/how-to-backup-your-data
How to restore your files
http://www.vista4beginners.com/how-to-restore-files
the 1st link below is how do the backup complete pc
http://www.bleepingcomputer.com/tutorials/tutorial145.html
and that is how do to recover the backup complete pc
http://www.bleepingcomputer.com/tutorials/tutorial144.html
and here is the information of microsoft in restoring a system image backup
http://Windows.Microsoft.com/en-us/Windows-Vista/restore-your-computer-from-a-system-image-backup
If you have problems, it's in here is a forum for microsoft at the link specifically for backup questions below
http://social.technet.Microsoft.com/forums/en-us/WindowsBackup/threads
-
Restore Vista backup failed: error code 0 x 80070015
Installed the new hard drive on laptop. Try to restore the files from the latest backup set located on an external drive. I get the error code 0 x 80070015 when I try to restore all the files, but I can restore files/folders manually. I read a response to try to restore in safe mode, but the backup and restore is not supported in Safe Mode.
How can I restore my files automatically without having to restore files individually?
Thanks for your help
Hello
see if this information helps you
How to make a backup of your data
http://www.vista4beginners.com/how-to-backup-your-data
How to restore your files
http://www.vista4beginners.com/how-to-restore-files
the 1st link below is how do the backup complete pc
http://www.bleepingcomputer.com/tutorials/tutorial145.html
and that is how do to recover the backup complete pc
http://www.bleepingcomputer.com/tutorials/tutorial144.html
If you have problems, it's in here is a forum for microsoft specifically for backup issues
http://social.technet.Microsoft.com/forums/en-us/WindowsBackup/threads
-
Continuous backup fault: error 0 x 81000033
I get the error message: 0 x 81000033 when I try to run backup.
I tried various devices of backup with sufficient disk space.
Hello
If you have any security software installed on the computer it would take more time for the backup center to back up files. Try to disable security software and try to make a backup and verify.
If it works fine afterwards, enable the security software.
Follow the link for more information
http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
You can also run the disk cleanup utility and check if that helps.
Start disk cleanup
http://Windows.Microsoft.com/en-us/Windows7/start-disk-cleanup
Also try to run a check disk to the hard drive.
To run the disk check
1. open the computer by clicking the Start button, click computer.
2. right click on the hard drive you want to check, and then click Properties.
3. click on the sur l' onglet tab Tools and then, under error-checking, click check now. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
To automatically repair problems with files and folders that detects the scanning, select automatically fix file system errors. Otherwise, the disk check will simply report a problem, but not to fix them.
To perform a full disk check, select search for and attempt recovery of bad sectors. This scan is trying to find and repair physical errors on the hard drive itself, and it may take much longer to complete.
To check for errors file and the physical errors, select automatically fix file system errors and search for and attempt recovery of bad sectors.
4. click on Start.
Depending on the size of your hard disk, this may take several minutes. For best results, do not use your computer for any other tasks while it checks errors.
For more information follow the link
http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors
After performing a check disk try to run the backup process and check if this is useful
Hope this information is useful.
Amrita M
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
-
Backup impossible error 0 x 81000019. Cannot create the shadow...
I can create backups is no longer on my computer. Whenever I try, I get the same error message.
"A snapshot could not be created. Pleasse check "VSS" and "SPP" applications for more information event logs.
Details: shadow enough storage to create the copy storage file or other shadow copy data. "Error code: 0 x 81000019I know that it says that there is not enough space, but it's not likely. This is a fairly new computer, less than a month, and the hard drive I backup a lot of storage space left (800 + Gb).
When you save files on a computer Windows 7 may appear error 0 x 81000019 with an error message similar to the following:
"A snapshot could not be created. Please check the event logs "VSS" and "SPP" application for more information. Details: shadow enough storage to create the copy storage file or other shadow copy data. »
This error can occur as a result of having too many language packs for Windows installed on your computer.
The cause is that the backup process involves the system writer who reports files in applications, installed on the machine. Where a large number of language packs installed, reported by this writer metadata file becomes huge in size and does not fit the size of 100 MB. This causes the backup to fail since there is not enough space for the creation of shadow copies. This isn't something that you can check to validate because this metadata file is created during the backup and deleted at the end.
To resolve this issue, uninstall all unused language packs that are currently installed on your computer. You can do this by clicking Start and then typing Lpksetup.exe in the search box and then click Lpksetup.exe in the list of programs. Once the Language Pack installation starts, click on uninstall display languages. Uninstall the languages that you don't use and then restart your computer, restart the backup.
Bobby
-
* O.T. > upward
When I try to backup message that the Task Manager is corrupted or altered (Ox80041321)
Hello
According to the description, I understand that you cannot backup and receive an error message with the error code.
I suggest you to refer to the suggestions of hamidou K replied on December 27, 2010 and check if that helps.
Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.
-
Windows 7 64 bit "last backup failed - error Code Ox80070020"
Acer Aspire 5745 G notebook computer with Windows 7 Home Premium. Intel i3 CPU M350 @ 2.27 GHz 4 GB of Ram.
Backup has never been completed successfully on this machine. I tried a normal and system backup, or complete. I tried also to backup on a key USB and a DVD r same error received in both cases.
I have run CHKDSK C:/f/r and the/scannow STC. No problem detected in both cases.
Then I ran the backup program, accepting the default settings... Same error received "the backup has failed. Error Code Ox80070020'.
I have the East went to the backup settings and changed to allow Windows to choose the default value to use to decide. I unchecked "backup data for new users created. Even if the backup seems further to 60%, before failing and return the above error. Previous backups have failed quickly after the start, 10 to 20% of the progress on the bar.
When researching the problem on a similar problem in Windows Vista (different error message Ox80070002) has been attributed to a missing "HKLM\Software\Microsoft\Windows\CurrentVersion\WindowsBackup" registry key Is there a similar key within the registry on my laptop. Searched the registry on my laptop with a negative result.
Any help would be appreciated. Thank you
Hello
Thanks for the quick response.I understand that you have problems with a service named "event COM system +"(event system) - 'Manual' & 'Automatic'. "."(a) the name of the service is "system event COM +" (without the quotes) and that the service should have a manual or automatic status. In addition, should be started.(b) and if this service has a status of disabled or stopped then, follow the steps mentioned below to change the same.1. right click services, and then click Properties.2. If the service is disabled, change status to automatic and if it stops, and then start the service.
3. restart the computer and then check.I hope this helps. Otherwise, answer this answer and we will be happy to help you again.Thank you -
Windows 7 drive MyBook Essentials 3 TB backup/image error
Just installed a new copy of Windows 7 (64 bit) on a Dell Inspiron 1525 (Vista came with it). All updates to Windows SP1 included are completed. I can drag and drop thousands of files on disk, discover, etc.. When I try to do a backup/image via Windows 7, I get an error of e/s 5 minutes (error 0x8078002A). I use the USB 2 connector.
When I tried the backup on another external drive (switchable box hot Thermotake with a 500 GB drive) it worked fine.
Everything looks good in Device Manager.
Ideas? Thank you, JJ
Here's what I'm looking in the newspaper:
Log name: Application
Source: Windows Backup
Date: 03/05/2011-13:02:35
Event ID: 4104
Task category: no
Level: error
Keywords: Classic
User: n/a
Computer: Ronny-PC
Description:
The backup was not successful. The error is: one of the backup files could not be created. (0x8078002A).
The event XML:
4104 2 0 0 x 80000000000000 1570 Application Ronny-PC One of the files of backup could not be created. (0x8078002A)
2A007880E30500003F0900005B090000420ED1665C2BEE174B64529CB14610EA71000000 Found my own answer today from Western Digital. If you have decided to make a backup image with the help of Windows 7, don't BUY THEIR 3 TB MYBOOK. Here is what they sent me.
Dear JJ,
Please contact Western Digital Service and customer support.
This problem seems to be caused by a problem with the Windows 7 backup and restore when you use disks with logical sector of 4 K sizes, which are found on WD 2.5 to and larger external drives. It's a bit different from the readers of 'Advanced Format', who are 4 K physical sector sizes and should not cause this problem.
It is always possible to use a disc, as long as you don't need to use the drive with Windows XP. Using the quick WD Formatter tool, select "Factory Default" configuration to reformat the drive. WARNING: This tool will erase all data on your drive, in order to take the necessary precautions.
http://wdc.custhelp.com/app/answers/detail/A_ID/3868/If you have any other questions, just reply to this email and we will be happy to help you further.
Sincerely,
Western Digital Service and support
-
I cannot backup my CUCM8.6 environment. I get an error on the function CDR_CAR in the DRS. All the other components like CCMDB, platform, CLM, CCMPREFS, etc. are saved successfully.
I support until a file server running SilverSHielD SFTP version of the 6.0.28.128 software. I tried version 5 of SilverSHielD and had the same results.
I have attached the log file. Maybe somone can understand what he says and point me in the right direction.
I checked our SFTP server has enough hard disk space. He has over 40GB of available.
NOTE: I had previous success using the configuration of backup for a long time. It's that recently that I started to notice errors.
Hello
Please refer below thread
https://supportforums.Cisco.com/thread/2222273
Suggested workaround is as below: -.
In fact, they suggested workaround, because the CDR/CAR component (which failed) comes with CCMDB, is not necessary to backup component COR/CAR
Kind regards
Nishant Tizi -
Windows 7 64-bit. The backup failed, error 0 x 80070020
When you perform a backup of the complete picture of my 64-bit Windows 7 machine I received an error: the backup failed. The process cannot access the file becaue it is used by another process. 0 x 80070020
OK, let's go:
The computer is a little over a month, I just built it in December. It's only a 64 bit MB Gigabyte with AMD processor and 4 GB of memory. I have an internal drive C and D. I had no problem with the procedure of backup for the first three weeks, and then it started.
Hardware drivers are all new.
No recent changes to the computer during the last 10 days
I have NOT installed any software CD burning in the last 10 days.
I installed iTunes a month ago.
iTunes ran very well until a couple of days ago when a message began to appear:"The registry settings used by the iTunes for importing and burning CDs and DVDs are missing. This can occur as a result of installing other CD burning software. Please reinstall iTunes.
I ran a repair on iTunes (an option that came when I tried to uninstall) and since it did not work, I completely uninstalled and reinstalled iTunes. Still have the problem.
Then I ran /Scannnow STC. No problem found
Then I ran chkdsk C: /f /r. No problem found
Then I ran the backup program. Same error, the backup was not completely successful, error Code: 0 x 80070020.
I went to backup settings and change them as the suggested message. I DISABLED "Backup data for newly created users" and the backup completed successfully.
My question is double what the _ is this option there for and why are these kinds of things put in the first place in DEFAULT AS of the elements operating systems?
Looks like all is well and I spent most of a solving Sunday.
Maybe you are looking for
-
TCP multiple error of the client
Hello world I have server TCP/IP running on labview and tries to connect simultaneously with two client on two different computers, by using software called Hercules. If it is read or write, labview interacting with a single client that connects firs
-
Compaq presario cq5500f: Cpu - amd phenom x 4 quad core 9950
Hello I recently bought the quadruple-heart phenom x 4 125w 9950 and wanted to update my one heart amd sempron 140. I bought with the intention to upgrade my compaq presario cq5500f so that I can use it as a gaming pc. However, when I put the cpu in
-
How to lock a folder and at the same time enable backup software to access?
Hello.We have 10 systems in our office and an additional computer that acts as a backup server for the important files and folders. However, due to security issues, we want the whole (the inside which are backups) must be locked down and only accessi
-
original title: Internet security 1. If I have my firewall is turned on but no antivirus, will I get virus even if I'm not surf the internet, and no browser opens? Will I receive a virus when Windows Gets the automatic updates or when my installation
-
Multiple SSID with 702 (standalone)
Hi all I'm setting up a (standalone) 702i Aironet to broadcast 2 SSID on both radio interfaces. The first (private) SSID is secuered with AES and is assigned to the 1 VLAN (VLAN native) The Second SSID (Public) is free access and assigned to VLAN 50