Backup and HP Recovery Manager General Questions

Similar Questions

• Backup and HP Recovery Manager for Windows 7

  I installed all the software and drivers that came with the HP upgrade DVD. But, I found that the Backup and Recovery Manager missing on DVD. Is there a Backup and Recovery Manager for Win 7? I liked the manager backup and restore that was available on my Vista, when I bought this laptop, but is currently unavailable due to upgrade! All the solutions for this? I don't want to use the default Windows Backup that I don't have a separate HARD disk for the time to store the backup here and do not want to fill up my hard drive with data backup! Thank you.

  Ok thank you. I have my recovery partition intact Vista. So I think, I should be able to recover if I have some kind of problem! I was able to find a backup and recover in Win 7 itself. Maybe I should wait for the software will be released by HP. Thank you once again!

• vCenter and Site Recovery Manager install question

  Hello

  I want to install SRM for the first time and I just wanted to get the views of all for an implementation of SRM.  I of course have my Server Virtual Center 2

  It is the location of the respective sites.  Is there a problem with SRM installed on the servers to Virtual Center or it is recommended to have

  The SRM is installed on a dedicated server?  Also is it best practices related to MRS?

  Thank you all...

  No, you don't have problems with SRM being installed with VirtualCenter (now vCenter Server) (it can also be protected with the new VMware solution: ;)) [) | http://www.VMware.com/Products/vCenter-Server-Heartbeat/]

  But it is recommended that you separate the database for VirtualCenter database SRM

  concerning

  Jose

• Beats Audio Control Panel and HP Recovery Manager missing

  Hey there! I recently bought a HP Pavilion dv4-5a02tx and I have deleted the IDT audio drivers. However, when I rebooted my laptop, beats audio and HP Recovery Manager Control Panel was missing! The product number is B8M77PA #AB2 and the laptop runs Windows 7 Ultimate 64 bit.

  Operating instructions: how to download Driver / software of your computer - Audio Driver Web site

  • Open the link to the Web site of your computer for drivers and downloads

  HP Pavilion dv4-5a02tx Entertainment Notebook PC drivers & downloads

  • Ensure that the operating system is correctly selected
  • Scroll down and open category - Audio driver
  • Click on IDT High Definition Audio Driver available
  • When the Audio Driver page opens, scroll down (if necessary)
  • Under "Release Details", find your package of loadable execution: sp*.exe
  • Click on the package to start the download

  ==============================================================================

  It's the IDT Audio Driver for your system, running Windows 7

  IDT High - Definition (HD) Audio Driver V6.10.6395.0 sp57345

  ===============================================================================

  • Save the Setup *.exe appropriate on your computer package

  NOTE name and location -likely the *.exe file to save to "downloads".

  • Install the software / driver installation package: If you have control of "Admin", you can highlight the package and "double-click" to install, if not right click, select "Run as Administrator" and install.
  • Once the file has been installed, reboot / restart your computer and log in

  ===============================================================================

• vSphere 4.1 and Site Recovery Manager

  I currently have vCenter 4.0 Update 1 and Site Recovery Manager 4.0.  Can I put vCenter 4.0 Update 1 to 4.1 without upgrading the Site Recovery Manager?

  According to http://www.vmware.com/pdf/srm_compat_matrix_4_x.pdf , you need improve SRM to 4.1.

  André

• The difference between relief Win8 and HP Recovery Manager disks?

  Hello

  I'm going to save my brand-new Win8 ENVY 15-j022el and I was wondering what would be the best solution.

  (1) is there a difference between the repair disks created with Windows 7 native file recovery tool and discs created with HP Recovery Manager?

  (2) in addition to the disc repair, can I make a backup of the recovery Partition too? I guess this is possible with the Backup of Win8 tool.

  (3) more a curiosity than a real problem, but... Although I know, the Recovery partition can be used by pressing F11 or F12 key during startup.

  There is another use of which can justify 20 GB backup size?

  Hope my questions make sense to you.

  Each piece of advice on this would be greatly appreciated.

  Thank you

  Best regards.

  Stef

  Stef,

  According to your previous posts, it seems your computer is a laptop of HP ENVY 15-j022el and the document suitable for creating recovery USB media is creating a recovery disk Image or save a recovery Image on a Flash drive (Windows 8).

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• Help with HP dv7 and HP Recovery Manager

  How long does take to reinstall Windows 7 x 64 and applications to the specifications of the plant using the provided HP 3 DVD recovery discs? I used the procedure as indicated online and the phone asked for two discs of origin then began installing and suspended at 12%. It is 12% for nearly two hours. I have additional discs to always run, but did not know how long is too long and the procedure to restart or cancel.

  I used the HP Recovery Manager after you start from the recovery diskette 1.

  Any help would be appreciated.

  Hold the power button for 10-15 seconds, turn off the system. Please check if there is any scrathes for discs to make them correct. Please give me the disk part numbers and the model number and the product number of the system to check if they are correct or not.

• vSphere and Site Recovery manager support

  recently, I read somewhere that the version of vSphere will be of course available with vCenter for simple tasks of management and automation, but the rest of excellent suite product of VMware is not supported in the initial release of vSphere.

  So there will be support for:

  • VMware vCenter Site Recovery Manager

  Can someone confirm please when SRM will rely on vSphere.

  and I feel your pain...

  im doing some projects at the moment involving SRM and to my surprise, client does not really hard to understand...

  Itzik Reich

  Solutions architect

  VCP, VTSP, MCTS, MCITP, MCSE, CCA, CCNA

  EMC²

  where the news concerts

• vApp and Site Recovery Manager cmdlets?

  Is there the cmdlets for VAPP or Site Recovery Manager yet?  I think that MRS will be later this year.

  I'm looking for at this stage.  You want to be able to discover information about the configurations, etc...

  Thank you!

  We should release VAPP cmdlets later this year, but it won't be for a few months. Cmdlets SRM not in the immediate future, but PowerCLI can help to automate a bunch of stuff around RS.

  It might be useful if you could give some thoughts on what you want to automate regarding SRM, which could help the teams prioritize

  =====

  Carter Shanklin

  Read the PowerCLI Blog
  [Follow me on Twitter |] http://twitter.com/cshanklin]

• HP Backup and Recovery Manager__

  I have a problem where the recovery of the system no longer works, even if it's the last backup date, it comes to the solution which windows has provided:

  A problem with HP Backup and Recovery Manager

  Backup and HP Recovery Manager has stopped working properly.

  An update is available that solves this problem.

  Click here to download the update from the site Web of Hewlett-Packard Company

  Download instructions

  1. In the file download dialog box, click run orOpen. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  2. Follow the steps in the installation wizard.

     The problem still cannot be resolved because nothing happens when I click on the link if no update, no solution.

     Any ideas please.

  http://welcome.HP.com/country/us/en/contact_us.html

  Contact HP options at the link above.

  http://h30434.www3.HP.com/

  HP's Support Forums at the link above.

  Contact HP about this problem with their software/program.

  See you soon.

  Mick Murphy - Microsoft partner

• Restoring backup using Recovery Manager

  Recently, my HP laptop has crashed and cannot start windows Vista. I tried all the options in the Manager of recovery, but without success. So I prepare to perform a system recovery.

  I did a backup file in Recovery Manager. Before I have to clean the system, I want to make sure that the correct files have been backed up.

  My question is, can I run the "Backup.1.exe" backup file on another computer to view the files, or it will overwrite files currently on this computer?

  Thank you!

  Yes, you can run the 1st exe file that will extract all the files in a different folder on another computer.

• user managed backup and deferred tax rollback segments

  Hi Forum,

  Greetings of the day,

  Here I have a question about segments of rollback backup and deferred users managed, I don't have much experience with the user managed backups taken by backup of BEGIN and END.

  1. how facilities oracle using the database so that it is saved each tablespace, he will use deferred rollback segments?

  2. placing the tablespace in backup mode is the same as read-only mode, on a technical level. So that it can read the blocks and changes made by the user can be moved to deferred rollback segments and later applied to tablespace, when it is the backup of the END?

  3.AFAIK, will be created only to deferred rollback segments in the SYSTEM tablespace. So we need to keep an eye on the growth of the tablesace SYSTEM while the database/tablespace is backed by this method?

  4. when the tablespace is put out of backup by using the backup of the END , will be that it applied by the deferred rollback segments?

  5. where oracle will place deferred rollback segments, when tablesapce SYSTEM itself is implemented backup START ?

  6. DON'T face us any kind of failures during all backup /END START as full tablespace etc SYSTEM.

  Your answers will really helpful.

  Thank you

  Uday

  Here I have a question about segments of rollback backup and deferred users managed, I don't have much experience with the user managed backups taken by backup of BEGIN and END.

  1. how facilities oracle using the database so that it is saved each tablespace, he will use deferred rollback segments?

  In what context you mention the use of rollback differed with the backup segments maintained by users?

  2. placing the tablespace in backup mode is the same as read-only mode, on a technical level. So that it can read the blocks and changes made by the user can be moved to deferred rollback segments and later applied to tablespace, when it is the backup of the END?

  Do you mean to say that when the tablespace is backed up, it is not accessible to the DML? If so, this is a wrong concept. Oracle did not go for the rollback segment (which I do not know how you are linking anways), but maintains the writing the image in full blocks for the first time in the log files of recovery following the normal writing changed buffers.

  3.AFAIK, will be created only to deferred rollback segments in the SYSTEM tablespace. So we need to keep an eye on the growth of the tablesace SYSTEM while the database/tablespace is backed by this method?

  Response above asked about segment deferred cancellation and their relationship, according to you, with the backup tablespace?

  4. when the tablespace is put out of backup by using the backup of the END , will be that it applied by the deferred rollback segments?

  5. where oracle will place deferred rollback segments, when tablesapce SYSTEM itself is implemented backup START ?

  6. DON'T face us any kind of failures during all backup /END START as full tablespace etc SYSTEM.

  Seems that you don't really have an idea how the backups managed by users actually work. I'll suggest that you read about it first in the backup and restore documentation before entering in any event.

  HTH

  Aman...

• Backup and recovery with EXPDP and IMPDP

  Hello
  
  I have a problem of beginner!
  
  My environment is 10.2.0.4 & 11.2.0.2.
  
  I wish

  to backup a small database with EXPDP (FULL=Y)
  and to recover it with IMPDP(FULL=Y). ( *I don't want to use RMAN in this case*)

  My question:

  + what have I more to backup ( e.g. Passwordfile, control files, init.ora..) to be able to recover  
    successfully with IMPDP?
  + what are the steps to recover with IMPDP?

  I tried looking for a Howto in INTERNET, but in vain so far!
  
  Can any expert answer me? or show me a place to get a good HOWTO?
  
  Thanks and greetings
  
  hqt200475

  So that's a little different situation from the initial, general issue.

  This situation Yes, create a new instance when the user that contains the data catalog rman since your last export import. The rman catalog is usually low volume enough this import will have no problem (we will assume that the export has not held while all backups rman-ducts were running).

  We know that your environment already relies on rman, since it is the rman catalog you save, you must familiarize yourself with rman still. Set up rman backup and restore for your sounds of database catalog rman as the perfect learning exercise that you improve on the procedures of your predecessor.

  Backup and recovery quick start for 10.2 Guide: http://download.oracle.com/docs/cd/B19306_01/backup.102/b14193/toc.htm

  Backup and Guide recovery for 11.2: http://download.oracle.com/docs/cd/E11882_01/backup.112/e10642/toc.htm
  A section of this guide to a direct interest (protection Recovery Catalog): http://download.oracle.com/docs/cd/E11882_01/backup.112/e10642/rcmcatdb.htm#CHDEBDJG

• CyberLink Recovery Manager hangs at 0%

  Hello

  About a day before this ad my family PC could not start. When the PC might not solve the problem, I created a backup using Cyberlink recovery manager, and then reset the PC.

  Now, I found in windows, I tried to put the backup on the PC.

  The Recovery Manager works for about an hour but accidents. He treats the files but the overall progresss doesn't ever (rest at 0%).

  The PC I have reset was running Win 7 64 bit.

  have also tried to put the backup on another PC (win 8 64-bit running).

  Hello

  I have now managed to get all the documents from the backup using the treesize program. I don't know how it worked, but it did. As I now backup in its original format, I took the lead and the configuration of the computer again.

  Thanks for the request for assistance, but I no longer need it.

  Thank you

• I'm looking for help to share best practices to upgrade the Site Recovery Manager (SRM), if someone can summarize the preparatory tasks?

  I'm looking for help to share best practices to upgrade the Site Recovery Manager (SRM), if someone can summarize the preparatory tasks?

  Hello

  Please check the content below, you may find useful.

  Please refer to the URL: Documentation VMware Site Recovery Manager for more detailed instructions.

  Important

  Check that there is no cleanup operation pending on recovery plans and there is no problem of configuration for the virtual machines that protects the Site Recovery Manager.

  1 all the recovery plans are in ready state.

  2 the protection status of all protection groups is OK.

  3 the status of the protection of all the individual virtual machines in the protection groups is OK.

  4 the recovery of all groups of protection status is ready.

  5. If you have configured the advanced settings in the existing installation, note settings you configured before the upgrade.

  6 the vCenter local and remote server instances must be running when you upgrade the Site Recovery Manager.

  7 upgrade all components Server vCenter Site Recovery Manager on a site until you upgrade vCenter Server and Site Recovery Manager on the other site.

  8 download the setup of Site Recovery Manager file in a folder on the machines to be upgraded the Site Recovery Manager.

  9 make sure no other facilities-\no updates windows restarts done shoud

  Procedure:

  1. connect to the machine on the protected site on which you have installed the Site Recovery Manager.

  2. backup the database of Site Recovery Manager by using the tools that offers the database software.

  3. (optional) If you upgrade of Site Recovery Manager 5.0.x, create a 64-bit DSN.

  4 upgrade the instance of vCenter Site Recovery Manager server that connects to vCenter Server 5.5.

  If you upgrade a vCenter Server and Site Recovery Manager 4.1.x, you upgrade the instances of vCenter Server and Site Recovery Manager server in the correct sequence until you can upgrade to Site Recovery Manager 5.5.

  a upgrade vCenter Server 4.1.x to 5.0.x server.

  b Update Site Recovery Manager of 4.1.x to 5.0.x.

  c upgrade server vCenter Server 5.0.x to 5.5.

  Please let me know if it helped you or not.

  Thank you.