Backup application steps and the DB

Similar Questions

• correct the page id and the page id application id and the id of the sensitivity of the other developer then

  Hi all

  I use apex 4.2 on windows World Bank on internet explore

  I followed the following link

  Oracle - button apex to call a page in another application - Stack Overflow

  at the end of the page, solution provider says

  It seems that your application id and the page id resemble developer links for your pages. You can't share a session as well. It could even be your problem: If you want to bind the user to the page of an application, use the ID correct and not the developer.

  what it means?

  How do I Unlike id and the real id of the developer?

  Please guide me because I think I'm also give the URL of developer which I just copy the URL of the web browser.

  Kind regards.

  Maahjoor wrote:

  I use apex 4.2 on windows World Bank on internet explore

  I followed the following link

  Oracle - button apex to call a page in another application - Stack Overflow

  at the end of the page, solution provider says

  It seems that your application id and the page id resemble developer links for your pages. You can't share a session as well. It could even be your problem: If you want to bind the user to the page of an application, use the ID correct and not the developer.

  what it means?

  This means that, following the structure of the URL of the APEX, in the example

  f?p=4000:4150:&APP_SESSION.

  the application ID is 4000, and the page ID is 4150. 4000 is actually the ID of the application that provides the APEX Builder Application development environment, and page 4150 is the definition of the pages it contains. Application between 3000 and 8999 ID are reserved for internal use of the APEX, so any application ID share you will be outside this range.

  How do I Unlike id and the real id of the developer?

  Please guide me because I think I'm also give the URL of developer which I just copy the URL of the web browser.

  There is no such thing as 'developer id' and 'real id '. Developers and end users run applications using the same ID.

  Note that published URL of permanent demand within applications should use alphanumeric calls and page aliases, ID not digital. This allows a fixed URL to provide to end users while allowing developers and administrators flexibility in how applications are deployed and maintained over time.

  If you have any remaining doubts, provide all the details of what you are doing, including the URL that you create.

• How to perform several steps and the display of charts/indicators without repeating the same code for each entry (of the dozens of entries)?

  I have to repeat the same steps and display in the Panel before (graphic fft and other indicators).

  Do I need to repeat the same code for each entry/channel? I already have too many channels and whenever I change a measure (and code) for an input/channel, I have to repeat the changes to all the other entries.

  Thank you

  
  

• Calculator for blackBerry native application Z10 and the atualization 29/10/14 - HEPL!

  Hello

  Today, I received an alert to upgrade some Blackberry World app among others the original BlackBerry calculator, weel, I did the upgrade normally, but when I star the new version, guess what! The application no longer works, the interface is broken, please find atacherd a phtoto I took I think I couldn't reach a proto, sorry).

  Back that someone knows how to solve this problem?

  Please, be alert and DO NOT DO THIS UPGRADE

  Regards and waiting comments, please.

  Thank you!

  

  Hello!

  Last Sunday, I got a new upgrade to the calculator´s app, I accept and apply this mixture and the broblem solved!

  Thanks to the support of Brackberry.

  Kind regards!

• BlackBerry smartphones HELP! I lost all my application icons and the menu button does not work!

  I don't know what I did.  All the application icons are moved from the home page.   The menu button does nothing. The trackball does not have anthing. The only thing on the screen is the time, date, battery, new mail envelope, signal and volume. I pulled the battery and it has no effect. I don't know what to do. Help!

  Hey, JSammy.  I had mine works again with the help of someone from another site.  Here's what you need to do: press the green call button, then the menu button.  Select options, then on options General, highlight "dial from homescreen" and the value. Save and exit. Now on your home screen, press "O".  After that, the General menu options will come.  Choose the option 'theme' and choose a different theme or return to the default value.  This should be all your application icons to reappear.  After doing all this make sure you go back to reset the "dial" since the homescreen on 'yes '.  I hope it works for you.

• Any Creative cloud application starts and the macbook pro fans going crazy

  Hi, I'm updating cloud creative apps every time Adobe updates.

  Recently, I discovered that my macbook pro fans are going super fast with the latest updates of any application (Photoshop, Illustrator, In Design and the latest app for Creative Cloud etc.).

  Yesterday I was working on Illustrator and fans were running hot, the app said this use of memory, it was almost complete and the UI of Illustrator went to alignment mode.

  Closing the app and restarting, the problem disappeared.

  But every day, whenever I open an application CC, the fans become noisely and they go very fast.

  I appreciate any kind of help.

  AdobeCare contacted via twitter, after Adobe customer via chat.

  The two has uninstalled me & reinstalled, start in safe mode, start from a different account.

  But no solutions to this problem.

  By myself, investigation on the activity monitor, I discovered that the problem was engine CEPHtml.

  Google search on these words... This resolved: CEPHtmlEngine slows down the computer (Mac) and the solution

  That's everyone having the same problem.

  Adobe, please fix soon.

• How to change the application apps and the sysadmin password

  Hi expert,

  I know not how to change the password application and sysadmin in the oracle application. but I have a doubt.

  What is required at the bottom of the application when you go to change applications and the sysadmin password in the oracle application.

  Please suggest me what is the proper way to change the apps and the sysadmin password.

  to change the password for apps I followed the command below.

  FNDCPASS apps/apps 0 System/Manager SYSTEM APPLSYS < new password for applications >

  for sysadmin

  FNDCPASS apps/apps 0 USER sysadmin < new passwd for sysadmin > System/Manager

  Please clear my doubt.

  Thanks and greetings

  pritesh Rodriguez

  
  

  
  

  I know not how to change the password application and sysadmin in the oracle application. but I have a doubt.

  What is required at the bottom of the application when you go to change applications and the sysadmin password in the oracle application.

  You must stop the services before you can change the password of user apps, and then run the automatic configuration after changing the password and eventually train services to the top.

  Stop down services or the AutoConfig running is not required for SYSADMIN (and other users of the application).

  Please suggest me what is the proper way to change the apps and the sysadmin password.

  to change the password for apps I followed the command below.

  FNDCPASS apps/apps 0 SYSTEM APPLSYS System/Manager

  for sysadmin

  FNDCPASS apps/apps 0 system/sysadmin USER Manager

  Please clear my doubt.

  What change Applications using the apps schema password change Utility (FNDCPASS or AFPASSWD) (Doc ID 437260.1)

  Loss of password SYSADMIN. How to know the password of the user SYSADMIN (Doc ID 1066661.1)

  Thank you

  Hussein

  
  

• Application.CFC and the directory mapping

  Hello

  We have a request that we would like to migrate to use Application.cfm to Application.cfc. It is a management application that is implemented on various websites (hosting us) with an "app directory" which is defined as a virtual site directory, with a few variables specific to the site (mostly just a couple of unique customer ID) located in an XML file at the root of each site definition offshore. In other words:

  www.site1.com is customer web app and /configfolder/appvars.xml

  www.site2.org is the same web application for client B and /configfolder/appvars.xml

  The actual application is a virtual directory, say:

  www.site1.com/Mgmt/

  www.site2.org/Mgmt/

  The /mgmt/ folder contains all the real application code - the only thing the root directories do is to hold the handle of the client-specific variables.

  "Historically, what we have done is to have an Application.cfm file in the app folder make a /mgmt/ < cfinclude template ="... / Application.cfm "> so that the same code runs for all sites, but tire of the credentials of the unique site of the folder parent site." But Application.cfm is a bit long in the tooth.

  The problem is that the server does not appear to 'find' the Application.cfc in the parent folder and I'm not sure, there is an equivalent ' cfinclude the file of a directory to the high "(sauf si vous pouvez cfinclude un CFC, dont je ne pense pas que vous pouvez le faire?)."extends"won't be not cut either because we would define a mapping to the top and know what specific Application.cfc" , we will expand when the only thing we know is that the data that we want to be in / configfolder /.

  The only solution I can think of is to use a single Application.cfc and put it in / mgmt /, transfer our customer-specific variables in the XML file, that we read in via cffile to a CF page that can be included in the Application.cfc (if we do not need to know the absolute directory name, as we do now) and then put things like Application.name dynamically , but I do not know if this is kosher. I would have preferred that each site has its own Application.cfc (perhaps by dint of him being a virtual directory?), but when you go to connect to www.site1.com/mgmt/, it does not use www.site1.com/Application.cfc. I have other traditional sites where Application.cfc 'filter' to subdirectories, but there it is in the root folder, you log in to the root folder, and when you navigate to a subdirectory, CF seems to be aware that you are always in the same application.

  I apologize if I did not explain this well and I'm pleased to say whatever it is - would appreciate advice on how to better implement Application.cfc in a scenario of multiple-sites-on-a-codebase.

  Ah, if it's a virtual folder you will have problems. The ApplicationProxy is "the way" it's done, but (as you guessed it) CF looks at the file level and is not aware of any IIS mappings.

  One reason they cannot not just in physical directories? Even using something as a junction of Windows is that they are physically located in a different place?

• How ID programs & application developers and the purpose of programs on the list of Windows programs - Windows 7

  I use Windows 7 on a 21 iMac machine.  I use an Apple software "Bootcamp", dividing the HD 500 GB between the OSX and Windows 7 operating system. I want to edit/purge my software and apps, so I'm going to Windows programs and this is the problem I have. If I down - loaded the program and I do not have the installation CD Rom disc, I can't determine from the Windows programs list exactly what programs are for icons and minimal description in the list of Windows programs.  I don't remember what it is that some of them do, but God knows my computer don't you, and if I delete something I shouldn't remove, I'll have a sick computer or worse!  All I get are, for the most part are '... you want to uninstall this program?  But of course I didn't not without knowing what the heck I'm going to do to my
  computer. The program, the file name, extensions and the icons are really confusing and for a layman, incomprehensible.  It seems the developers
  programs do business using trade or brand names that so little has nothing to do with the function or purpose programs.  Windows updates are not the worst, but they are at the top of the list.  I have faithfully and automatically download all Windows updates. Why. like Mickey?  I have no idea, but I trust MS (in general) to do the right thing by me and not screw up my Windows 7 operating system.  What I have to download anything that comes my way?  Probably not, but if it comes from MS or big players, I trust, MS and Adobe, Corel, etc., enough for to update, but
  If I want to stream line my programs and get rid of the ball and keep only the wheat, I need to know what I got for free or paying over the years.

  Suggestions are requested if all goes well and will be read carefully, even followed, if keep you it simple.  Thank you!

  Oh and by the way, never uninstall updates that is sent to you via Windows updates.  As you think, Microsoft publishes these updates for specific reasons and they should never be uninstalled.

• Custom step and the step execution.

  Hello

  I need the solution for access to a stage performance

  The order of execution of a step to start as below.  How can I insert a call custom execution position before step 3 and after step 18?

  Can I create a custom step allow me to insert a function like that call

  1--> Allocate result

  2--> synchronization batch Enter

  3--> check Run for Skip mode

  4--> assessment

  ....

  17--> the Post expression evaluate

  18--> evaluate Expression of State

  Tphan wrote:

  Precondition can be used for dynamic defining the step to skip or fail, but limit to only Boolean

  The statement above is not correct, you can have any expression as long as they evaluate to true or false. Thus, for example, you can have a prerequisite:

  RunState.PreviousStep.Result.Status is "Passed"

  If the expression above to ensure that the step will run only if the previous test succeeded.

  I think that your problem can be solved using preconditions and post actions.

  Take a look at the attachment.

• Name of the application (CodeModuleGroup) and the friendly name if installed in Blackberry App World

  Hi, expert,

  As we know, to the blackberry device, only one application is listed as CodeModuleGroup. Each group code module can have a group name and a friendly name. Based on my experience of test, for this software: http://appworld.blackberry.com/webstore/content/38406,

  group name: iSpeech Translator:iSpeech.org

  friendly name: iSpeech translator

  So the group name is :, which is always like this or the user can change the name of the group as they want?

  Moreover, the convention of group name is the same as the name of the group for the applications installed from a JAD file.

  Thanks in advance for your understanding.

  Downloaded app from AppWorld is every time the same naming convention: name app + name of the seller. If you install your own server via JAD you get usually only the name of the application under the name of CodeModuleGroup. It does not really affect the installation, I've updated installed OTA app with AppWorld version and vice versa, no problem at all.

• Application, usability and the availability of the adobe Flash Builder to export for students?

  Hello!

  I am a student of the Estonia and I do my final paper for my graduation.

  What chances or opportunities do I have, if I want to buy Flash Builder, apply, export it, and use it for my final document (code in Estonian language tutorials) for free?

  Well, Adobe did have a program that gave Free Flash Builder for students & teachers, but apparently he was interrupted - sorry!

  Versions of 30-day trial of Flash Builder and all the other tools CS6 and creative cloud are still available, if that helps.

  Adobe also currently offers free dashboard copies animate 1.0 for everyone (versions permanent web content creation for interactive & animated), which could serve as a nice substitute.

• Is there a problem with APEX Application processes and the CAE?

  I have a table that has a political function. When I select in the table directly from the page, it seems to be only return lines appropriate for the user.
  
  But, when I select from the same table using an application process (On Demand), PL/SQL block.
  
  BEGIN
  OWA_UTIL.mime_header ("text/xml", FALSE);
  HTP.p ('Cache-Control: non-cache');
  HTP.p ('Pragma: non-cache');
  OWA_UTIL.http_header_close;
  HTP.prn ("< select >");
  FOR c IN (SELECT '1' o)
  name | ' (' | school |) ')' d,
  pk_id r
  OF sch_base
  WHERE pk_id = nvl(:REFRESH_LOV_PK_ID,'null')
  UNION
  SELECT '2' o,
  '%' d,
  r 'null %.
  OF the double
  UNION
  SELECT '3' o,.
  name | ' (' | school |) ')' d,
  pk_id r
  OF sch_base
  WHERE pk_id <>nvl(:REFRESH_LOV_PK_ID,'null')
  ORDER BY 1, 2)
  LOOP
  HTP.prn ("< option value ="' | c.r |) '">' ||
  c.d | ("< / option >");
  END LOOP;
  HTP.prn ("< / select >");
  END;
  
  It returns all rows in the table.

  Try something like

  var get = new htmldb_Get(null,$x('pFlowId').value,'APPLICATION_PROCESS=' + pApp,$v('pFlowStepId') )
  

  CITY

• Permanently remove Application Manager and creative cloud of the MAC in EASY steps

  Please help me remove the application manager and the creative cloud of my Mac.  I don't have a subscription.  I need to remove it and cannot!

  See solution 2 link error: "unable to install". Creative Office Cloud

  Hope this will help you.

  Kind regards

  Hervé Khare

• content and the backup database

  How can I backup my database and the Web site content? Can I configure scheduled backups?

  Hello

  BC is not a tool of backup schedule.  How you will back up data is to follow the migration article.

  - http://kb.worldsecuresystems.com/203/bc_2038.html

  Please note BC keep a daily backup of your site, but is only a restoration of disaster recovery (system failure, etc.).

  Kind regards

  -Sidney