Backup configuration ESXi via PowerCLI
Hello.
Is it possible with PowerCLI (similar to the RCLI) to back up and restore the configuration of an ESXi host and how if possible?
Or should we use the beast ulgy Pearl for this?
Thanks for your help.
Kind regards
goppi
Perl (esxcfg - cfgbackup.pl) both PowerCLI uses the vSphere API to deliver a configuration ESXi backup using BackupFirmwareConfiguration and RestoreFirmwareConfiguration
Here is a PowerCLI script that seems to do the job: http://waynes-world-it.blogspot.com/2009/08/vmware-powercli-backup-esxi-40-firmware.html (have not tested personally)
=========================================================================
William Lam
VMware vExpert 2009
Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/
VMware Code Central - Scripts/code samples for developers and administrators
If you find this information useful, please give points to "correct" or "useful".
Tags: VMware
Similar Questions
-
Help, I've changed the root ESXi via powerCli password, now I can not connect with the web client or the console, but I can still connect to powerCli. The command I used was;
SE connect-VIServer esxihostname-user root - password newpasswd
This production network btw, I have connected to each host and run the above command, these ESXi hosts are not on a domain
y at - it something I have left out. I really appreciate any assistance that you people can provide.
Thank you, Joe
It is probably a longshot, but a lot of things in the land of windows is not sensitive to capital letters as Unix is. I wonder if your new password you put through powerCLI mixed uppercase in it and if the capitalization was abandoned by command windows powerCLI Analyzer, or he interpreted as all capitals or something. If you can still get through the powerCLI you could try to reset the password again to something simple without capitalization mixed case and if your password on ESXi strategy requires a special character, try something different than a "$", like a "_" (I find that a '_' is less likely than some other special characters (, as a '-' or a ' / ' to cause problems with analyzers.).
Edit:
Another thing, you can try before playing with the password once again, is to create a different username ESXi using powerCLI and see if the password ends up what you think, it should be, and if you can get with the client vsphere using it. In this way, you can find out if there are some problems with certain characters or Cap through command powerCLI Analyzer without losing your remaining root by powerCLI access. After some tests, you can understand what went wrong with your initial password change and may be able to fix it with less risk of losing access. I also assume that you can not create a new username on ESXi who is able to change the root password no matter what authority give you it, otherwise, you could create a new username with PowerCLI, then connect to the client vsphere with it and change the password to root from there.
-
Fully automate the addition of a datasoter via PowerCLI
I have a need to be able to completely automate the addition of a new data store to a new installation of ESXi via powerCLI. My problem is I want to have this fully automated and be able to enforce it against any box without user intervention, which means that I need a way to return the CNAME of the ScsiLun in new-store data command.
I am currently using the command to run my action you want below, but for some reason, it does not.
$con = get-ScsiLun | Select-object CanonicalName
New data store - VMHost 192.168.1.1 - name newDS-path $con - Vmfs - BlockSizeMB 1
The above returns the above error
New-store data: 2010-07-19 10:55:32 news-Datastore 52e3288c-ef02-d45e-ea
77 - 96cd39fe5cd6 could not find the specified disc or the disc is already in
"use: ' @{CanonicalName = naa.600508b10010395659503152424f0100}"
C:\Program Files\VMware\Infrastructure\vSphere PowerCLI\test.ps1:9 tank: 14
+ New-store data < < < < - VMHost 192.168.1.1 - name newDS-path $con - Vmfs Blo.
ckSizeMB 1
+ CategoryInfo: ObjectNotFound: (@{CanonicalName...) 503152424f010
+ FullyQualifiedErrorId: Core_StorageServiceImpl_GetHostScsiDiskByCanonic
alName_DiskNotFound, VMware.VimAutomation.VimAutomation.Commands.Host.NewDa
tastore
Although below works very well.
new data store - VMHost 192.168.1.1 - name dvms-path naa.600508b10010395659503152424f0100 - Vmfs - BlockSizeMB 1
I also tired the Deputy bud did not work
$test = get-datastore. Select-Object - 1 first
new data store - VMHost 192.168.1.1 - name dvms-path $test - Vmfs - BlockSizeMB 1
Help or direction would be greatly appreciated.
Thank you
The Select-Object cmdlet does not return the name of the LUN as a string, but as a ScsiLunImpl object.
The New-Datatsore cmdlet requires a string for the - Path parameter.
You can do
$con = (Get-ScsiLun).CanonicalName New-Datastore -VMHost 192.168.1.1 -Name newDS -Path $con -Vmfs -BlockSizeMB 1
____________
Blog: LucD notes
Twitter: lucd22
-
How to calculate the IOPS datastore / s and latency via Powercli?
Hi all!
I want to calculate the IOPS / s (RO/RW) and the latency of the data via Powercli store, but I cant' find this metric in Vcenter (in the data store tab) and see no metric for data via the cmdlet Get-Stat store.
How can we measure IOPS / s and latency of data store? For example I know veeam monitor this information - http://cdn.swcdn.net/creative/v16.8/images/screenshots/products/VM/Lg/EN/VMan60-Orion-Datastore-Top_Lg_960x540.jpg
I know, I can get this VM or vmhost metric, but I need information on the data store.
How to measure for IOPS / s and latency of data properly store?
Thanks in advance!
These measures are collected on ESXi nodes, entity would need to have the ESXi nodes where these data warehouses are connected.
You can use the Instance property to filter.
Under the PerformanceManager , you see all the measures for each indicator it indicates under which entity this metric is collected.
And Yes, the cmdlet Get-inventory returns no data warehouses.
There is a little, aggregated metric for data warehouses, I'll have to find an alternative for those.
Nice catch!
-
Powering down VMs and ESXi via SSH
Hello
I need;
(1) stop all virtual machines running on the host ESXi
(2) then stop this ESXi host
How to achieve this via SSH?
Thank you.
I found it much easier to do via PowerCLI...
$vc = vcenter1
$dc = 'Center '.
SE connect-VIServer $vc
# Gets the list of all virtual machines in the data center (except the vCenter VM itself)
$vms = get-data center-name $dc | Get - VM | where {$_. - don't $vc name - and $_.} PowerState - eq "Receptor"}
# Stop the virtual machines in the data center located in a State power.
{Foreach ($vm to $vms)
if($VM.) {ExtensionData.Config.Tools.ToolsVersion - only '0')}
stop #gracefully
Stop-VMGuest - VM $vm - confirm: $false
sleep - 60 seconds
}
#forcefully VM stop
Stop-VM - $vm VM - confirm: $false
}
# Stop vCenter VM (comment if vCenter is not virtual)
sleep - 120 seconds
Stop-VMGuest - VM $vc - confirm: $false
-
How to calculate the CPU Ready on Cluster DRS via Powercli?
Hi all!
I have a DRS Vsphere cluster. I want to know what is the value of the loan of CPU I have in my group.
For example, I get 20% of powercli value, it is normal for the cluster, but if I have 100% or more, I have a problem.
How to achieve via Powercli? And how to calculate the percentage values correctly?
I know, I can get all values of CPU Ready of VMs cluster, but IT is not the same thing, I need overall value of CPU Ready.
Thanks in advance!
As far as I know you can get the cpu.ready.summation for ESXi nodes or VMs.
For a cluster, you will need to get the value of each node in the cluster ESXi and then take the average.
The metric cpu.radey.summation is expressed in milliseconds.
To get a percentage, you need to calculate the percentage of loan period during the interval during which it was measured.
Something like this (this will give the loan current %)
$clusterName = "mycluster.
$stat = "cpu.ready.summation".
$esx = get-Cluster-name $clusterName | Get-VMHost
$stats = get-Stat-entity $esx - Stat $stat - Realtime - MaxSamples 1 - forum «»
$readyAvg = $stats | Measure-object-property - average value. Select - ExpandProperty average
$readyPerc = $readyAvg / ($stats [0].) IntervalSecs * 1000)
Write-Output "Cluster $($clusterName) - CPU % loan $(' {0:p}'-f $readyPerc).
-
Define the IP addresses on guest via PowerCLI RHEL 6 OS?
I try the IP address subnet value and the gateway on RHEL6 Guest OS via PowerCLI. Howerver his failure with "bash: / tmp/powerclivmware0: permission Denied"
$NetInt = get-VMGuestNetworkInterface - VM $VM. VMName - GuestUser $USR - GuestPassword $PWD
Game-VMGuestNetworkInterface - VMGuestNetworkInterface $NetInt - $USR - GuestPassword $PWD - Ip $VM GuestUser. $VM.Netmask - IP-Gateway $VM subnet mask. Gateway - Dns $DNS1, DNS2 $
It works fine on RHEL5 but not RHEL6.
Does anyone have experience with this works for RHEL6 get? Any help would be appreciated!
Model Security Configurations has problem.
This occurs if the permissions to run executable files are denied to /tmp/
Problem solved.
-
Cultivate a disc of virtual machines via PowerCLI
Hello
I'm looking to cultivate a few volumes on some servers via PowerCLI. I got the code to extend successfully the volume inside the prompt below OS once I increase it configured size through the user interface.
Hard drive get "name VM | where {$_.} {Name - eq ' hard disk 2 "} | Together-hard drive - CapacityGB 20 - ResizeGuestPartition-confirm: $false
My question is:
Is it possible to increase the size put in service of a disk via PowerCLI I could run before the above code that extends the volume inside the guest OS?
Thanks in advance for any help!
As each correct answer, I'll have to start with "it depends".
If this isn't the vdisk that contains the system partition, you can simply use the hard drive Set cmdlet with the CapacityGB parameter. See example 2.
If it is the system partition vdisk, you need to use the parameter HelperVM of the cmdlet Set - hard drive .
Note that the virtual machine and the HelperVM both must be switched off!
-
Managind DRS groups via powercli
Goodmorning.
I need to get all the members of a group of virtual machine via PowerCli DRS.
I found a few articles of aroud the cmdlets such as ' New
-DrsVmGroup"
or so on. "I don't see this cmdlets in my powercli.
I connect to a Virtual Center 5.0 managing 6 hosts ESXi 4.1.
Using PowerCli 5.1 release 1 of my laptop Windows8 or PowerCli 5.0.1 Center Virtual Server itself I can see the following:
PowerCLI C:\Program Files (x 86) \VMware\Infrastructure\vSphere PowerCLI > get-help * drs * | name of ft
Name
----
Apply DrsRecommendation
Get-DrsRecommendation
Get-DrsRule
New-DrsRule
Delete-DrsRule
Game-DrsRuleCould you please help me to get on the right way to manage groups of powercli DRS?
Thanks a lot for the help of youe.
Hello
I quickly wrote 1 liner for you:
(get-cluster cluster_name). ExtensionData.ConfigurationEx.group |? {$_.vm}|% {'$($_.name) GROUP found in this group'; foreach ($currentvm to $_.vm) {(get-vue-id $currentvm) .name}}}
GROUP VmGroup1 is in this groupvmX
VMY
vmZ
GROUP VmGroup2 is in this group
UMBvmB
vmC
vmD
Let me know if you still have any questions about this
-
The host system resources / booking via PowerCLI
Hello chaps,
Does anyone know if it is possible to adjust the CPU and the memory that is reserved for a host via PowerCLI?
(Home > Configuration > Allocation of system resources > edit)
I usually affect the reserve memory 800 MB and CPU 800 MHz according to the design best practices.
Thank you
DanAs far as I know, there's no cmdlet for this, but you can use the UpdateSystemResources method.
You just need to know that the key to the Scriptures "host/system".
$esx = Get-VMHost MyHost $spec = New-Object VMware.Vim.HostSystemResourceInfo $spec.key = "host/system" $spec.Config = New-Object VMware.Vim.ResourceConfigSpec$spec.Config.cpuAllocation = New-Object VMware.Vim.ResourceAllocationInfo$spec.Config.cpuAllocation.reservation = 800$spec.Config.memoryAllocation = New-Object VMware.Vim.ResourceAllocationInfo$spec.Config.memoryAllocation.reservation = 800$spec.Config.ChangeVersion = $esx.ExtensionData.SystemResources.Config.ChangeVersion $esx.ExtensionData.UpdateSystemResources($spec)
-
Disable the host followed via PowerCLI
Hi all...
I am looking for a way to disable the host followed via powercli.I found one-liner of LucD to get the current state: Get-Cluster | Select Name, @{N = 'Home monitoring status'; E={$_. Extensiondata.Configuration.DasConfig.HostMonitoring}}
And I know how to turn on/off HA: Get-Cluster | Cluster - HAEnabled game: $false
But I'm not sure how to combine the two.
I want to be able to quickly toggle host control without having to disable HA altogether.
Thoughts?
Thank you!
You can use a where clause
Get-Cluster | where {$_.} Extensiondata.Configuration.DasConfig.HostMonitoring} | Cluster - HAEnabled game: $false
-
VMware tools take it apart or modify the parameters of CD-Rom via PowerCLI
Hello
My problem:
After the upgrade invited on Redhat Linux vmware tools vmware tools remain in the properties of the vm.
I mean that the device vm: CD-Rom drive is configured to store data-ISO file [/vmimages/tools-isoimages/linux.iso]
The CD-ROM drive is not connected!
I can't Vmotion of such systems.
Is there a way to define the type of device clientcdrom to 'clientdevice' via PowerCLI?
I checked some commands powercli: set-cddrive, dismount-tools
With the powerclie cmd:
Get - vm GuestName | Get-cddrive
I am able to locate systems that have the problem.
Output:
IsoPath RemoteDevice HostDevice
------- ---------- ------------
[] / vmimages/tool...Via Vsphere Client, I am able to change the iso data store config in clientdevice.
and change the mode to emulate ide to ide pathtrough (recommended)
-> A chip solution would be to automate tasks via powercli this 2.
2 screenshots:
Has anyone automated this 2 tasks via powercli
Hi, George,
I think NoMedia - Set-CDDrive switch, it's what you need - it Peel host device or iso file.
Get - VM
| Get-CDDrive. Game-CDDrive - NoMedia-confirm: $false Kind regards
Vitali
Team PowerCLI
-
Your backup configuration is not valid consider your 0 x 8100029 backup settings
Original title: backup on external hard drive problems?I'm trying to backup to an external hard drive, but get the following error:Your backup configuration is not valid consider your 0 x 8100029 backup settingsMy external hard drive is recognized under my computer.
Hello
Welcome to the Microsoft community.
It would be great if you can answer the following question:
Were there any changes made on the computer before the show?
To resolve this problem, I suggest you to refer to the article and see if it helps:
You may receive error messages when you try to perform a backup operation on a Windows Vista-based computer
http://support.Microsoft.com/kb/950167
Let us know if you need more assistance.
-
In the backup utility Windows, when I try to backup to an external hardisc, I get a message.
Backup configuration is not valid. Review of backup settings (0 x 81000029)What can I do and how I do it?Thanks for help.Hi Swedboy,
I suggest you to follow the steps from the link and check if it helps.
I hope this helps.
-
Can RV082 password lost, I get my backup configuration file.
I forgot my rv082 of admin password, but I have a backup configuration. password can be decoded to him?
Thanks for any help!
No one really knows what information is in the backup file. In general, are stored passwords that do not need to be transferred elsewhere encrypted and cannot be decrypted. Most likely, you need to reset your router to the factory settings. But you can try asking your question in the support community Cisco Small Business for routers. The RV082 is now part of Cisco Small Business and there is few people Cisco who can check with the developers...
Maybe you are looking for
-
Skype said that I am on the phone when I'm not
Skype is telling people that I'm on the phone when I'm not. I can still make and receive calls, but Pamela will not save, because Pamela I am already on another call. It is a Skype problem, not a problem of Pamela. Skype is transmitting a false onlin
-
Satellite L100-120: Wlan does not allow the transmission of large data packets
Satellite L100-120, Intel 3945ABG.Router Wi - fi is 3COM OfficeConnect Wireless, same problem with Dlink DI-524. By default my wi - fi card does not allow the transmission of packets of data. I use ping-f-l 1464 192.168.1.1 to check if it is possible
-
Tortoise SVN and Assembly of LabVIEW
I know that Tortoise subversion is not officially supported by NEITHER but I also know that some of you use it however to manage your source code control. We have started using it about half a year ago and are usually happy to have. The problem I rea
-
can I use 2 wireless laptops off the printer wireless even without network or group?
Have have one printer officejet 6500 709n, I have an office and 2 wireless laptops can plug in any separately without network or workgrouping simply by installing each one? Desktop vista, vista 1 laptop, a computer is portable win 7.
-
flight of the Internet through bluetooth and any outher wave device
gDay the names mick / questiom. I have ileagaly of people using my internet connection using blue toth and whatever the use of piggy of my connection back and increase my account downloads how to find them and how can I stop them or I can do anything