Powering down VMs and ESXi via SSH

Similar Questions

• Exception 0xc0000005 (access violation) peripheral USB connection; My Computer works, shared VMs and ESXi VM does NOT work

  Hello

  Running VMware Workstation on Windows 7 64 bit 9.0.2.

  Created a machine virtual 64-bit of Windows 7 at the workstation to VMware Workstation, I am able to connect a USB device and it is accepted within the virtual machine.

  Clone of this virtual machine using Workstation Drag & Drop in the shared VMs that throws the Exception when I click on the USB device:

  ---------------------------

  VMware Workstation error

  ---------------------------

  Fatal error VMware Workstation: (vmui)

  Exception 0xc0000005 (access violation) occurred.

  A log file is available in «...» ».

  You can request support.

  To collect the data to submit to the VMware support, choose "Collect load data" in the Help menu.

  You can also run the script 'vm-support' in the folder my computer directly.

  We will respond on the basis of your entitlement to support.

  Same Exception I get when I start this VM on ESXi and use via VMware Workstation.

  Journal of the fasteners.

  MKS. Enable3D true or false doesn't make any difference

  Thanks for the help, Philipp

  Hi PhilippD!

  It seems that you have reached a vice that crept into the manipulation of workstation s 9.0.2' of remote USB devices.  We have fixed the problem in our internal versions of workstation, but until an updated version is made public, it seems that you need to roll back to the workstation 9.0.1 if you need to work around the problem.

  Sorry for the inconvenience!

  --

  Darius

• Difference between Shell ESXi and active with SSH PuTTY?

  Hello

  We used to activate SSH and PuTTY to connect to 5.5 ESXi host.

  However, a consultant suggested allow ESXi Shell and access it via DCUI.

  Would just like to ask you what is the difference between these 2 methods of access?

  Thank you

  Accusing Shell of ESXi is available by using two different ways.

  (1) local access to the shell of ESXi is available turning and by using directly from DCUI (Alt + F1), safer, since it is connected locally

  (2) remove access to the shell of ESXi is available by activating SSH Shell and using the SSH Client such as PUTTY etc to access. Since it is remote access, security is a bit of a cause for concern.

  This is the reason, the suggestion to use locally DCUI is given.

• Command update the esxi update 5.1 to 5.1 2 via SSH

  Could someone send me the command update ESXi 5.1 5.1U2? (assuming I already downloaded and copied the update to the host)

  I know it's something like esxcli the software profile install d [something, something, etc.], but I think that I've got the syntax.

  THX!

  VMware KB: Installation of patches on an ESXi host from the command-line 5.x

  1. Download the update and transfer it to any store of data that is available for the ESXi host
  2. Connect to the host via SSH ESXi
  3. Put the ESXi host in maintenance mode.

  # vim - cmd hostsvc/maintenance_mode_enter

  4. go to the directory on the data store where the patch file was transferred to and verify that the file exists:

  # cdvmfs/volumes/Datastore/DirectoryName
  # ls

  Verify that you can see the file that you downloaded. I guess that the file you downloaded is in zip format. In this case,.

  5 # software esxcli vib install d ' "/vmfs/volumes/Datastore/DirectoryName/PatchName.zip".

  More options are in VMware KB. Please see that as well.

  See you soon.

• PIX and SSH - access to PIX via SSH

  Need help with PIX and SSH

  Objective: Connect to PIX via SSH from the 10.1.1.50 IP address behind inside the interface on the PIX using local aaa on PIX.

  Current settings:

  hostname pix1

  example.com domain name

  CA generates the key rsa 1024

  example username password abc123 privileges 15

  include authentication AAA ssh inside 10.1.1.50 255.255.255.255 local

  SSH 10.1.1.50 255.255.255.255 inside

  Thanks for any help!

  Try this:

  AAA-server local LOCAL Protocol

  the ssh LOCAL console AAA authentication

• Start a virtual machine on Linux using Workstation via ssh and vmrun 10.0

  I have 10 Workstation under Linux of Kali.

  I installed a Windows 7 VM and when I connect to the computer using ssh - X, start vmplayer, it works very well.

  If I connect via ssh and start using vmrun I get operation cancelled.

  "vmrun start/root/vmware/Windows\ 7. 7/Windows\ vmx nogui

  "Error: the operation has been cancelled".

  I tried this a normal ssh and an X connection using both-x and - XY.

  Any ideas? I got a glance at for a while and most people seem to be solved using the nogui option but it does not work in my case.

  Try...

  WS t vmrun start/root/vmware/Windows\ 7. 7/Windows\ vmx nogui

  Or t reader if you use VMware Player instead of VMware Workstation.

• Behavior of the new version of LR 6: even the filter function is powered down to the arrangement of the photographs in the library window depends on the star. It's awful, but after importing the photos my natural first step is a rough chek and

  Even the filter function is powered down to the arrangement of the photographs in the library window depends on the star. It's awful, but after importing the photos my natural first step is a rough chek and rating. When evaluating a photograph it sorts in the order of evaluation, and I have to go to the point that I was check. Please revert to the behavior of version 5!

  Change your sort order.

• 'customer support files required' problem connecting using vSphere via SSH tunnel

  I am trying to connect to my ESX Server using the vSphere by tunnel via SSH client. I did in the past, but it does not work now. I am fwding ports appropriate (443, 902, 903) and have done the "hosts" file entry appropriate, as well. When I try to connect, I get the expected certificate error, and when I reject, I get a dialog box saying that I need to download the "required client supports files ', and of course I can't download them from the site vsphereclient.vmware.com while I'm in the tunnel. I'm confused about why I get this message, because I can connect to the ESX Server using the installed version of vSphere, if I directly (i.e. without a SSH tunnel).

  Any thoughts? I am in urgent need of remotely administer my VMs, any help would be most appreciated.

  It turns out that VMWare Workstation is listening on these ports, and PuTTY tunneling is silently failing... so it seems that I connect to my ESX box, but not really. Deactivation of VMware Workstation, Server and the authorization server to fix it.

• How do I restart the network management via SSH?

  How can I go on the reboot of the management network via SSH? Or can I still do. I don't mean services.sh reboot, I need the network management not the management agents.

  Any help is appreciated.

  What version of esxi do you use?

  If you type

  > dcui

  You can control the ESXi in the medium dcui@ssh and restart your agents in there

• interoperability between Workstation 6.5 and ESXi 4.0.0

  We have a few copies of VMWare Workstation (and I love ), and also have a bunch of VMWare Server 2.0 running.  We are evaluating if we move our VMs to ESXi 4.0 in the VMWare Server environment.

  Big question in my mind is the interoperability between the workstation and ESXi 4.0.  We are a software development shop, therefore mostly use virtual machines for testing of different software configurations.

  Server was ideal for this because we could freely copy VMs autour between our machines of the workstation and servers.

  It seems that, do this with ESXi, to "convert" back?

  I guess my question boils down to "what is required to move a virtual VMWare Workstation 6.5 and ESXi 4.0 machine?"  I tried to copy a few virtual machines on to ESXi in workstation and keep we get an error failed to load the scsi drive if you forgot to import.

  Thanks in advance,

  Joe

  Hello

  You can create the "monolithicFlat" type when you create a new virtual machine you want to pre-allocate disk - then also choose to use unsplitted.

  You can also use vmware-vdiskmanager change existing VMDK.

  It's how you work?

  Oh dear - I guess you won't know that I'm a very experimental user - I like to play with different formats - I'd like to trash the VMs and try to fix them...

  Anyway - during such "employment", I found out how to move between ESX and on the reverse with a minimum of work.

  Result: I use ESX virtual machines inside the workstation without any conversion.

  Only the way on the other side of ESX needs a small edit. But still no need to run vmkfs-tools or converter.

  If you want to I explain with one of your examples.

  Only one condition: diskformat must be "monolithicFlat" = a prealloue piece and snapshots are not allowed.

  Besides - I took notes on that here:

  http://sanbarrow.com/VMDK/monolithicFlat-with-WS-and-ESX.html

  Ulli

  ___________________________________

  VMX-settings- VMware-liveCD - VM-infirmary

• Deletion of snapshots via SSH

  I have a RN102 with 2x3TB red WD leads to XRAID2. I deleted all my photos except one (instant action is 191 GB). However, snapshots take up a lot of space:

  

  He has not recovered "over time", so I thought to delete manually via SSH. My gaze of 5 actions 4 like this where each record contains a lot of data (taken copies of my actions):

  

  Would I ruin anything by deleting them?

  Also, is it the result of a bug? Why space is not recovered when I delete images via the GUI?

  Thank you!

  Here are the shots that have not been successfully upgraded when you updated of the pre - 6.2.x 6.2.x firmware (or later).

  You could do

  # touch .force_snapshots_upgrade
  
  # systemctl restart readynasd

  These shots should then be upgraded and you can then delete the admin web UI.

  The space is recovered only when you delete pictures if the snapshots that you delete contains the only copy of certain data. If the current data or snapshots that you do not delete also contain spatial data not to be released to the top. Also, when you delete snapshots that the system will have to recursively update other snapshots. It can take some time if you have many snapshots.

  Once you have removed all the clichés that you want and the use of volume of less than 80% return, I would say that you then run a balance.

• I finally down loaded and installed service Pack 1 for vista is when he died

  Downloaded SP1 after 2 visits to microsoft solve this centre, there was something like 6 attempts this month to download SP1.
  Itconected to the down loaded and installed himself off the machine. It works and it starts upeither to launch repair (recommended) or normally.
  repair can't fix.
  Normally starts to load, then a back line? loading orders? begins to roll things like 1592/88609...dll, or.sys etc, until it freezes on
  !! 0x0c01a001d! 9073/88609 (\Registry\Machine\COMPONENTS\DerivedData\...)

  How can I make it work. Can I uninstall via the command-line... no restore point prior to download SP1

  Hello

  Perform the following methods and check if it helps.

  Method 1:

  Try to do a restore of the system of the Windows Recovery console using the Vista disc. Read the following article to do the same thing:What are the system recovery options in Windows Vista?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  Method 2:

  You can try to access the Windows Recovery console prompt and see if you can manually remove Service Pack 1 on your computer. Here are the steps to remove Service Pack 1:

  1. open a window to the Windows Recovery console command prompt.

  2. run the following command, depending on the version of the Windows Vista service that you want to uninstall:

  • For Windows Vista Service Pack 1: C:\temp\Windows6.0-KB936330-X86.exe x:C:\temp

  Note	This command assumes that the file Windows6. 0 - KB936330.exe is located in the C:\Temp folder

  3. He must create a sandbox environment before you can continue to step 4. This allows you to manage safely an untrusted program. To create a sandbox, type md, sandbox.

  4. to remove the Windows Vista service pack, type or copy and paste the following command, depending on the version of the Windows Vista service that you want to uninstall:

  • For Windows Vista Service Pack 1: start /w pkgmgr.exe /m:c:\temp\Windows6.0-KB936330-X86.cab /up s:sandbox

  In this command, NNN is x 86, x 64, or IA-64.

  If these steps successfully uninstall the service pack of Windows Vista, and this resolves the issue, you are finished.

  Here is an article that will give you different methods on how to remove Service Pack 1:
  http://support.Microsoft.com/kb/948537

  Hope this information is useful.

• Generate ACS V 4.1.1 23 aging via SSH password does not work.

  Hello, my name is Elias and I have problems with ACS via SSH password aging does not work and there is no meseges password sent by ACS console when I use SSH from aging. I know that there are problems with this, but I can't find any workaround or documentation that says that there is no workaroun. Can you help me with this?

  Greetings from the King.

  Hey Elias,.

  SSHv1 does not support the password as you can do in telnet. You must be

  running a version of the IOS which supports SSHv2.

  The following site explains which versions support this:

  http://www.Cisco.com/en/us/partner/products/SW/iosswrel/ps5207/products_feat

  ure_guide09186a00802045dc.html

  Rgds,

  somishra

• Allowing ICMP and Telnet via a PIX 525

  We are trying to build a new block of distribution to our backbone WAN. We are experiencing a problem when establishing ICMP and Telnet via the PIX. The following is known:

  1 Ping and telnet to the 6509 and internal network works very well for the PIX.

  2 Ping the 7206 for the PIX works just fine.

  3 debug normal to see activity track ICMP for connections ICMP for the PIX of the network 6509 and internal; However, the debug shows nothing - no activity - during attempts to ping at a.b.5.18. (see below).

  In short, all connections seem to be fine between the three devices, however, we can get ICMP and Telnet work correctly through the PIX.

  The layout is:

  6509 (MSFC) - PIX 525-7206

  IP:a.b.5.1 - a.b.5.2 a.b.5.17 - a.b.5.18

  255.255.255.0 255.255.255.240 255.255.255.240

  (both)

  networks: a.b.5.0 a.b.5.16

  255.255.255.240 255.255.255.240

  6509:

  interface VlanX

  Description newwan-bb

  IP address a.b.5.1 255.255.255.0

  no ip redirection

  router ospf

  Log-adjacency-changes

  redistribute static subnets metric 50 metric-type 1

  passive-interface default

  no passive-interface Vlan9

  ((other networks omitted))

  network a.b.5.0 0.0.0.255 area 0

  default information are created

  PIX 525:

  ethernet0 nameif outside security0

  nameif ethernet1 inside the security100

  nameif ethernet2 security10 failover

  hostname XXXXXX

  domain XXX.com

  fixup protocol ftp 21

  fixup protocol http 80

  fixup protocol h323 1720

  fixup protocol rsh 514

  fixup protocol rtsp 554

  fixup protocol smtp 25

  fixup protocol sqlnet 1521

  fixup protocol sip 5060

  fixup protocol 2000 skinny

  names of

  access ip-list 102 permit a whole

  access-list 102 permit icmp any one

  access-list 102 permit icmp any any echo

  access-list 102 permit icmp any any echo response

  access-list 102 permit icmp any any source-quench

  access-list 102 permit everything all unreachable icmp

  access-list 102 permit icmp any one time exceed

  103 ip access list allow a whole

  access-list 103 allow icmp a whole

  access-list 103 permit icmp any any echo

  access-list 103 permit icmp any any echo response

  access-list 103 permit icmp any any source-quench

  access-list 103 allow all unreachable icmp

  access-list 103 allow icmp all once exceed

  pager lines 24

  opening of session

  timestamp of the record

  logging buffered stored notifications

  interface ethernet0 100full

  interface ethernet1 100full

  interface ethernet2 100full

  Outside 1500 MTU

  Within 1500 MTU

  failover of MTU 1500

  IP address outside a.b.5.17 255.255.255.240

  IP address inside a.b.5.2 255.255.255.240

  failover from IP 192.168.230.1 255.255.255.252

  alarm action IP verification of information

  alarm action attack IP audit

  history of PDM activate

  ARP timeout 14400

  Global 1 interface (outside)

  NAT (inside) 1 0.0.0.0 0.0.0.0 0 0

  Access-group 103 in external interface

  Route outside 0.0.0.0 0.0.0.0 a.b.5.18 1

  Route inside a.0.0.0 255.0.0.0 a.b.5.1 1

  Inside a.b.0.0 255.240.0.0 route a.b.5.1 1

  Timeout xlate 03:00

  Timeout conn 01:00 half-closed 0: 10:00 udp 0:02:00 CPP 0: h323 from 10:00 0:05:00 sip 0:30:00 sip_media 0:02:00

  Timeout, uauth 0:05:00 absolute

  GANYMEDE + Protocol Ganymede + AAA-server

  RADIUS Protocol RADIUS AAA server

  No snmp server location

  No snmp Server contact

  SNMP-Server Community public

  No trap to activate snmp Server

  enable floodguard

  No sysopt route dnat

  Telnet a.0.0.0 255.0.0.0 outdoors

  Telnet a.0.0.0 255.0.0.0 inside

  Telnet a.b.0.0 255.240.0.0 inside

  Telnet a.b.5.18 255.255.255.255 inside

  Telnet timeout 5

  SSH timeout 5

  Terminal width 80

  Recognizing any help on proper routing through a PIX 525, given that all this is for a network internal.

  on the 6509, why the int has a 24 subnet mask, when everything has a 28? If you try the 6500 ping.18, he thinks that it is on a local network, and there no need to route through the pix

  Your access lists are confusing.

  access-list # ip allowed any one should let through, and so everything that follows are redundant statements.

  for the test,.

  alloweverything ip access list allow a whole

  Access-group alloweverything in interface outside

  should the pix act as a router - you are effectively disabling all firewall features.

• Password and the default SSH connection

  If I set up a Pix 6.2 running someone for you to connect via ssh, which is the password and login?

  default user name is pix

  There is no default password that you define to the command

  passwd yourpassword

  Try this document for more details

  http://www.CiscoPress.com/articles/article.asp?p=25342&seqNum=3&RL=1

  M.

  Hope that helps, rate, if