flight of the Internet through bluetooth and any outher wave device

Similar Questions

• How to go from "offline" Mode when you use Firefox on an android device that is connected to the internet through Bluetooth.

  I have been using my tf300. Whenever I try to open Firefox on the Tablet while using a Bluetooth connection, the only screen that Firefox opens is a generic screen displaying 'Offline Mode '. Is there a way to switch to online mode or I am able to use the browser on a wireless signal?

  Could you clarify - are other applications can connect to the internet when you are logged in this mode?

• Can I make my Vonage phone service and always access the internet through MSN Premium

  Can I make my Vonage phone service and always access the internet through MSN Premium

  Hello

  The question you posted would be better suited to the MSN support. I suggest you to contact MSN support for assistance.

  How to contact MSN customer service
  http://support.Microsoft.com/kb/940784
  https://support.MSN.com/contactus.aspx?scrx=1
  http://answers.MSN.com/forums.aspx?ProductID=29

• How can I connect to the internet through the dial upward through the computer another internet connection?

  If you want to tell me that MS will not support Windows 2000, please do not post. The computer on which internet Wi - Fi Connection has Windows Vista Home Basic on it. The computer that has WiFi but I want to test its dial-up access windows 2000 top. It has WiFi with utility that is necessary. It includes 12 Opera browser. As a resort last, if it is not possible at all means, ultimately, let me know how to connect to the internet through another computer via the telephone line through Internet connection sharing or network connection. Any help will be greatly appreciated. Remember, this is on the internet. Not on whether or not Microsoft does not support Windows 2000. If you tell me how it is not supported, please do not post. Internet connection will be between the two modems and two computer on Windows 2000, it has a LT Win modem and the Vista Home Basic has a CX110 in generation something like this modem. I ask this question is because my land line will not dial a number. I would like to test a dial, and if you tell me how it's slow, I use DC Unlocker to a broadband speed, so it won't be slow. Any help will be greatly appreciated. Windows 2000 has an Ethernet port.

  Hello

  1. are you referring to Windows Server 2000 or Windows ME?

  If you are referring to Windows Server 2000, please help the professional community of COMPUTING in the TechNet forum below:

  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

  http://support.Microsoft.com/ph/1131

  If you use Windows ME, visit the below mentioned link.

  http://support.Microsoft.com/kb/234815

• Programs cannot connect to the internet, while IE8 and firefox work very well on the internet.

  I used google chrome as my default browser, but one day it stopped working, while firefox and IE always worked / work fine now.  When google chrome no longer works, all my programs stopped to connect to internet, like Skype, itunes, WMP, etc.  The itunes gives error me is "make sure that your network connection is active and try again.  When I download programs through to firefox or IE8, now my default, they download but used to install or connect to the internet (I tried to reinstall chrome after that deletion but it will not be completed).  I was certain this isn't the router or the Internet itself, my wireless works very well to navigate through the Internet and other computers on the network do not have this problem. problem when I connect to other wifi networks.  The help and support center will not be to the point after that I click on it.  I use windows xp sp3 home edition 2002.  I looked through the other threads to see if I can solve the problem, check the exceptions in the firewall, disabling firewalls and other security, running an antispyware/malware, someone suggested (super antispyware), lowered or disabled security settings, but all without success.  I don't know what to do at this point but to restart the system.  Please help, any suggestions?  Thanks in advance.

  Hi unlucky2013,

  Follow the steps from the link below: Windows XP Internet programs cannot connect to the Internet through the connection broadband:http://support.microsoft.com/kb/307164

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• My WRT54g2 can not see the internet through my wrt54g...

  My company gave me a new laptop which allow no connectivity WEP. I need wep for printers and other devices on my network so I bought a new wrt54g2 to manage wireless WPA and plugged into one of the ports opened on the old router. I went to the admin and everything set up for my taste, but for some reason any that it won't catch a connection... What should I do so that he could see the internet through the old router...

  If you connect a router to another, connect the two together by network ports. Then turn off the DHCP server on the router of the second, which sounds like the WRT54G2 in this case. You may also have to reconfigure the second router local IP address out in the same IP range as the first router but outside the DHCP server on the router from the first milking. For example, if the local IP address of router then the router is on 192.168.1.1, two IP local to 192.168.1. 5 (or something of the sort).

  Or autour routers and use the WRT54G2 as the main and several router that is configured for the secondary router WEP and turn DHCP on the secondary router. Other changes such as the reconfiguration of the local IP address of the second router must always be made. Or check your existing wireless devices configured for WEP see if they will support or can be updated for decision-making support WPA or WPA2. If so remove the existing router and use the WRT54G2 in its place.

  Also, make sure that both routers have different names for SSID wireless and are on different wireless channels to avoid a conflict.

• Cannot install applications through Microsoft store in Windows 8 Pro: using the internet through the proxy: detected 'No. Internet Connection' Error statement

  I study in a University, and we have access to the internet through the proxy. We just need to put in the proxy port: in the settings of internet explore and authentication additional etc. is not necessary to access the internet. Everything else is working well, including windows update and even browse apps in the store of Ms. But I'm unable to install any application. Help, please.

  In fact here in ITI, all our internet traffic is routed through a proxy (to stop the torrent, filter things etc.). To remove the proxy is not an option.

  I solved the problem by using the following commands as an administrator:
  netsh
  WinHTTP
  import proxy IE

• I can ONLY connect to the internet with IE7 and Outlook Express

  I have Win XP SP3, home wired network, Netgear router, cable internet, Lenovo desktop.
  I can run IE 7 and Outlook Express and connect to the internet very well with these.  However, I can not connect using FireFox.  Windows Update returns an error and does NOT connect to scan my computer and display the necessary updates.  I just installed tax program this year HR CD block and it is unable to connect to internet to download the updates.  I used IE7 to go to the web site of the tax program to download the update manually, but it doesn't connect either.  I also can't complete installation OF Adobe (Digital Editions) program because it must connect to the internet in order to make a registration.

  I have disabled the Windows Firewall, do not have a configured proxy.  So, I can browse the internet with IE7 and get email with Outlook express.  I went on the site from Google Chrome to try to download it and install it that (using IE7 of course), but after I press the "Download" button, IE7 says that it cannot connect to perform the download.

  I scanned this forum and not seen similar symptoms that would allow me to reach a solution.  Everyone knows about this issue and how to resolve?

  P.S. I have two other laptops Win XP which CAN completely connect to internet with IE and Firefox via the same router and the modem cable.

  I tried trojan remover and none of the things in the menu utils found any problems.

  But it turns out that my problem was a hidden/partial copy of Symantec Client Firewall that I thought was deleted.  Over the months some programs had been updated and Symantec didn't know about them, so it was blocking their access: FROM Adobe, HR Block, IE8, Firefox, etc.  Given that I have not seen it listed in the start menu and it was not listed in Add/Remove Programs, I didn't have to try to remove it.  And it was not poping up to tell me of a new program attempts to access the Internet.

  I used the Symantec tool to remove all THE stuff of Symantec and it cleared up my connection problems.  I then reinstalled Symantec Client Security (antivirus and firewall) and turned off the Windows Firewall.

• Unable to connect to the internet through WRT110

  Hello

  I can't connect to the internet through my WRT110. I am connected directly but my modem at this point shaw. My DHCP settings will not retain an IP address. I'm going to status on the router (192.168.1.1) and find all information, IP address, subnet mask, Gateway etc. Defautlt are set to 0.0.0.0. I click on the intellectual property of release, then renew the ip and that everything remains as 0.0.0.0.

  I tried to set my router to static mode and entering the information in bold to ipconfig below, but which does not either. I also tried to reset the router back to factory default and tried everything on again, without success.

  What I'm doing wrong here?

  IPConfig:

  Ethernet connection to the Local network card:

  The connection-specific DNS suffix. : vc.shawcable.net
  Link-local IPv6 Address...: fe80::c056:e161:d17f:3 b 09% 11
     IPv4 address...: 70.79.143.236
  ... Subnet mask: 255.255.252.0.
  ... Default gateway. : 70.79.140.1.

  Tunnel adapter ISATAP.VC.shawcable.NET:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. : vc.shawcable.net

  Card tunnel Local Area Connection * 11:

  The connection-specific DNS suffix. :
  IPv6 address: 2001:0:4137:9e50:3 c 46:300 d: b9b0:7013
  Link-local IPv6 Address...: d fe80::3c46:300: b9b0:7013% 13
  ... Default gateway. :

  Card adapt 6TO4 tunnel:

  The connection-specific DNS suffix. : vc.shawcable.net
  IPv6 address: 2002:464f:8fec:464f:8fec
  ... Default gateway. : 2002:c058:6301:c058:6301

  Decreed a second IP address of my modem and I could contact my ISP. My router works now after power off.

• I can connect to the internet through my browser, but cannot connect to an application based on a cloud

  We operate Windows 7 Professional and that you can access the internet via Google Chrome normally.  However, our hotel based on a cloud, RoomKeyPMS, property management system does not connect to our main office desktop (wired LAN connection).  We are able to connect to another computer on desktop (wired LAN connection) and a laptop computer (wireless connection).  All three machines access the internet through the same network.

  Apparently, there is a setting in the office that prohibited RoomKeyPMS to connect to a machine.  Can someone point me in the right direction to solve this problem?

  Hi Glen,

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums:

  http://social.technet.Microsoft.com/forums/en-us/category/w7itpro

• connect other computers to the internet through an ad hoc network of a connection__ broadband windows 7

  I have a HP netbook with a Windows 7-based broadband connection.  I created a residential group of this netbook so other computers running Windows XP can connect to it and use the connection Strip.  I have inconsistent results.  Sometimes it works and sometimes not.

  My question how do I set up a gateway to the internet from the netbook to other computers can access the internet.

  Do I need to set up a network of residential group for this place?  Is there some settings of internet connection of the netbook I need to change (for now that I disabled the firewall, so it does not interfere).

  Thank you

  I do not use a router.  My netbook has a map broadband and a wi - fi card.  Simply, I connect to internet through my broadband card.  I tried other computers to be able to access the internet through that connection, that's why I've set up homegroup (maybe I would not do?)

  Anyway, sometimes it works but is not for most.  I'm trying to keep it simple and not get a router, etc. since it is a situation that's going to happen from time to time.

  Thanks for responding!

  Paula

  As posted earlier...

  To use your netbook as access wireless router/AP watch these GUI frontends to netsh commands that will do this for you. I do not think that you have ICS enabled to do so.

  http://virtualrouter.codeplex.com/

  http://www.Connectify.me/index.html

  ICS, in my experience there is a very long time is flakey at best...

  FWIW, there are routers broadband accepting adapters broadband videophone/USB/etc function for example. According to what broadband service, you have maybe one depending on your needs.

  MS - MVP Windows Desktop Experience
  "When all else fails try what the captain suggested before you started...". »

• Salvation; I instaled a new Windows XP Home edition on my computer hp laptop, but it's not conect to the internet through my wireless card.how can solve this?

  Salvation; I instaled a new Windows XP Home edition on my computer hp laptop, but it's not conect to the internet through my wireless card.how can solve this?

  Did you use the recovery process HP plant or install using a different operating system disk? If the latter, you need to install the drivers for all your hardware, including drivers for wireless network cards. You will get only the pilot specific support for your laptop model HP Web site tech.

  If by "wireless card" you mean that you have a 3G USB modem through your cell phone provider, contact the cell phone provider for help with that. MS - MVP - Elephant Boy computers - don't panic!

• Encarta Dictionary works do not mistake: this service could not be searched because you are not connected to the Internet. Connect, and then try again

  Original title: Encarta Dictionary (not searched)

  Encarta dictionary does not. I get the message "this service could not be searched because you are not connected to the Internet.  Connect, and then try again. "However, I am connected to the Internet.

  Hello

  1. don't you make changes to the computer until the problem occurred?

  I suggest you try the steps mentioned below and check if it helps.

  Method 1: Try to start your system in safe mode with network and check if the same problem occurs.

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  Method 2: If the question does not exist in Mode safe mode then try to put your computer in a clean boot state.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

   

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Hope this information is useful.

• What happens if I am connected to the internet through two different sources or more?

  What happens if I am connected to the internet through two different sources or more?

  You get Internet from two sources. What did you expect to happen?

  This is not double the speed of anything...

• Add a picture to the text in the text box to the location of the cursor through Actionscript and control its reference level

  If I want to add pictures to the location of the cursor in the text box, I need to use EditManager insertInlineGraphic. But insertInlineGraphic offers no parameter to control how an image is placed in the text, such as baselineShift.
  While InlineGraphicElement allows me to well control on image added how is placed in the text through properties such as baselineShift, but then there is no way to add this InlineGraphicElement object newly created as the location of the cursor in the text box!

  So, how do you overcome this limitation? How can I add an image to the text in the text box to the location of the cursor through Actionscript and control its reference level?
  
  

  Post edited by: DilipShah

  After you add the ILG, you can find the ILG element by textFlow.findLeaf (cursor location) as InlineGraphicElement and then change its attributes. Or you can just enjoy applyLeafFormat().

  FindLeaf is an important function for navigation in the TLF.