Backup Exec and VCB proxy server configuration

Similar Questions

• VCB Proxy Server and vCenter Server

  Hello

  Is there any question about installing vCenter Server and VCB Proxy Server on the same physical server?  How to install VCB Proxy Server on a Virtual Machine?

  Thank you

  As long as they are all in the same cluster and managed by the same server vCenter

  Dave

  ************************

  If the automobile had followed the same development cycle as the computer, a Rolls-Royce today cost $100, get 1 million miles per gallon, and explode once a year, killing all the world inside.

  Robert X. Cringely, InfoWorld magazine

• Presentation of ID host ESX host LUN to the VCB Proxy Server

  I have a typical scenario where I have 3 ESX servers with 3 x 800 GB LUNS in a storage group separate on a CX 310 SAN box. The host LUN., of these 3 LUN Ids are 0, 1 and 2.

  I have a specific host that starts from SAN, from the same box of CX 310 SAN. At this point of time, I have no choice to use this server as a Server Proxy VCB. As far as my knowledge goes, LUNS of the ESX servers must be made visible to VCB Proxy Server, as they are presented to the ESX servers.

  My question here is, as the designated Proxy VCB server is booting from the SAN, he already has a host LUN 0 to Id the logic unit number this is the start of. The Id to host ONE of the first 800 GB LUN in the ESX Server storage group is also Host Id 0. Now, if I try to make the LUNS in storage group visible on the VCB Proxy Server ESX, is there not a shock of the VCB Proxy 0 host Id and Id host ESX Lun 0? I'm confused, I don't have a test envirinment where I could try this before I could actually go forward with any solution.

  My intention is to perform a backup outside LAN of the VMDK.

  Any help is that this respect is very much appreciated. Thanks in advance.

  (1) Yes, you can have different host for VCB then for your ESX host LUN ID

  (2) Yes, you can use the identifiers of naa, it will automatically use the identifiers of naa, no need to configure anything at all.

  Duncan

  VMware communities user moderator

  -

• New Guy Question - Disable Multi-Pathing on the VCB Proxy Server

  Hello everyone

  I had to install a Solution of the VCB Proxy. Among the issues is "Disabling Multi-Pathing on the VCB Proxy Server.

  Why would it be necessary to disable the multiple paths on th e VCB Server? What would be the steps to disable the multiple paths.

  Thank you all for any input on this issue.

  Here you go:

  http://www.Petri.co.il/how-to-deal-with-VMware-ESX-Server-VCB-multipath-issues-consolidated-backup-Windows.htm

  [i] Jerry [/ i] of the Jason

  [boche.net - VMware virtualization evangelist |] [ http://www.boche.net/blog/] [/i]

  [VMware communities user Moderator |] [ http://www.vmware.com/communities/content/community_terms/] [/i]

  [Area of Minneapolis VMware User Group Leader |] [ http://communities.vmware.com/community/vmug/us-central/minneapolis] [/i]

• Backup Exec and instant / add disk space

  I use Backup Exec to make full VM backups

  After the backup, I can see a snapshot to the virtual machine in the Snapshot Manager

  I deleted all the snapshots of the virtual machine and stop the virtual machine.

  At this point providing drive area is grayed out and e/s can not add disk space on the existing drive

  I don't see that there is a-000001, 000002 vmdk still kicking around in the virtual machine folder

  (a) is it safe to delete the 00001 and 0002?

  (b) any idea how to prevent the creation of the Snapshot Backup Exec files

  Thank you

  Steve

  It is a VM DC

  It turns out that Backup Exec was hung on the VM backup

  Once I canceled the backup, I was able to consolidate

  Thanks for your help

  Steve

• ODSEE 11.1.1.7.2 Bundle patch has been published to the directory server and the Proxy Server directory

  More information on My Oracle Support to Doc ID 1962875.1

  Sylvain

  ------

  When closing a thread as answered don't forget to mark the messages correct and useful to make it easier for others to find their

  Hello

  You need a support contract to get a My Oracle Support account. You can download patches only if you have a My Oracle Support account.

  See also http://docs.oracle.com/cd/E25290_01/doc.60/e25224/patchesupdates.htm#CJAFGJBF

  Sylvain

  Please check the response as useful or correct when it is appropriate to make it easier for others to find

• Symantec backup exec - VCB?

  By using another backup server (Backup Exec) with VCB framework installed and using the same server as a Proxy.

  Do I still need to install the vCenter VCB framework?

  Kind regards

  Phil

  Hello.

  By using another backup server (Backup Exec) with VCB framework installed and using the same server as a Proxy.

  Here's everything you need to know.

  Do I still need to install the vCenter VCB framework?

  No, as long as it is not the same server with Backup Exec on it.

  Good luck!

• Item number: 933779: an instant copy of a storage group backup fails and event IDS are logged in the application log in Exchange Server 2003

  Regarding the Article ID: 933779, after copying the system and logs in a backup location, and restart the server.  Place the files in the folder before doing a backup full?

  Help please.

  Hello

  For assistance on this issue, you can post your question in the Technet Forums.

  http://social.technet.Microsoft.com/forums/en-us/categories/

• Library of visual c ++ runtime error message microsoft when you install the Backup Exec Server 2010 continues to protection on Windows storage server 2008

  When I try to install the Backup Exec 2010 Continuous Protection Server on Server Windows storage server 2008 I get error microsoft visual c ++ runtime library error. Runtime error! The setup.exe has put an end to this application has requested in a medium unusaul.

  Hello

  Your question is better suited in Windows server on TechNet. Please post your questions here.

  http://social.technet.Microsoft.com/forums/en-us/winserverfiles/threads

• How to restore a virtual computer to another computer using Backup Exec virtual

  Hi all

  I tested VMware 3.5.  We have little budget, so we intend to convert 5-10 dev servers into virtual machine running on an existing ML570 HP.  I created a test VM; I could back up and restore the entire virtual machine using Backup Exec to a physical server without problem.  However I can not restore a virtual machine to a different VM.  Let's say I dv01; I backed up using Backup Exec dv01 on the physical server.  Pretending the host has no I have rebuilt a new host, created a new virtual machine with the same name dv01 and same features.  I restored dv01 from the backup.  The restoration is properly; However, he got a blue screen when I rebooted the virtual computer.  The blue screen went so big that I don't remember what it was, but it's the kind of a dll error.

  We want to keep the budget as small as possible using our existing Backup Exec agents, but it doesn't seem to work here.  Is Backup Exec for VMware agent a MUST?  Catering to the same VM is good, but restore to a different VM is not so simple.

  THX.

  As you can see in http://www.vmware.com/products/vi/buy.html, VCB is included in all editions of VI 3.5.

  André

• How can I make online games access the internet through a proxy server?

  I currently have to use a proxy server to access the internet. I changed my browser settings to do this, but I can't play a game online that I instaled because they are not defined for internet access via the proxy server.
  How can I make games use the proxy server to access the internet?
  Help, please. See you soon!

  Abstergo,
  You will need to have the proxy server configured to allow ports looking for the game or, if the game has the option, you can put in your proxy server information in the parameters of the game.
  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to uninstall proxy server when no proxy server has been installed

  Several programs to say I am using a proxy server when I'm not (adobe for one). That these programs need a port and an address that I have to reset my PC (somehow) so that these programs can not see the proxy server. IE8 and outlook says I am not using a proxy server and the proxy server setings are grayed out. How can I fix this problem.

  Hi shoe,.

  · What is the exact error message are received?

  · You have security software installed on your computer?

  · What is the service pack installed?

  Check for ISA Server or a Proxy Server that is installed:

  To determine if you have ISA Server or Microsoft Proxy Server installed on your computer:

  a. on the taskbar at the bottom of your screen, click Start, point to settings and then click Control Panel.

  b. double-click Add or remove programs.

  c. list of programs currently installed for Microsoft Proxy Server or Microsoft Internet Security and Acceleration.

  If one of these entries is present, ISA Server or Proxy Server is installed on your computer.

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Configuration of Backup Exec 12.5 and VCB with Windows 2008 64 bit

  Hello everyone

  Try to install the update of VMware Consolidated Backup 1.5 1 with Backup Exec 12.5 on a Windows 2008

  64-bit server.  Having a hard time getting the configuration to work.  When I try to do a restore via vCenter

  I don't get "VMware Converter not found"

  I installed Converter Stand Alone on the server, but I still get the same error.

  Some would please the VCB and Backup Exec 12.5 on a Windows 2008 Setup process

  64-bit server?

  Thanks in advance...

  Gerald S.

  Looks like you need to install vCentre Converter (the server vCentre himself) of what has been said.

  Please give points for any helpful answer.

• Backup Exec 12.5 and VCB - support requirements and agent

  I noticed there is now an agent, which you can purchase from Symantec that allows you to save as many guests on the particular host windows as you want without any agent (though law enforcement officers are still required).

  http://eval.Symantec.com/mktginfo/Enterprise/other_resources/b-solution_brief-bews12.5_agent_vmware_virtual_infrastructure_09-2008.en-us.PDF

  My question is this - from what I can find on the web, ESX 3.5 U3 does not support the latest integration modules Backup Exec (pre and post backup scripts etc.). So based on this, using Backup Exec 12.5 with VCB Symantec agent is needed giving you the GUI (no longer need to customize scripts for VM backups).

  Can someone please clarify this?

  The Agent gives you a GUI with VCB integration. You should always install VCB, just not the integration kit. You can always do it the "old school" way. The modules BE did never seem to work 100% anyway and you can the House push something pre and post if you do not want to pay for the agent.

  I think that VMware just stopped creating integration because the older kits kits are relatively stable. I tested with esx3.5u3/vc2.5u4 and have no problem. There is no update for VCB, so there is no update for the kits.

  I know that you have done this before, then you probably haven't this info, but I just posted a guide on the VI:OPS on VCB as a generic facility backup->http://viops.vmware.com/home/docs/DOC-1392

  Dave Convery

  VMware vExpert 2009

  http://www.dailyhypervisor.com

  Prudent. We do not want to make of this.

  Bill Watterson, "Calvin and Hobbes".

• Backup exec 2012, issue of mpio san backup and ALA

  We have a 4 TB File Server 2008, BONE is a physical server with hba to san volume where the files are located on.
  so far, our backup exec server has an hba double iscis, with only using a port in the San.
  in backup exec, I have created 8 jobs that run at the same time and creates 8 snapshots on the san to back up the file server.
  on the side of san when snapshots are created, I can see that snapshots are assigned to the different ethernet ports, eth0, eth1, eth2, eth3, etc..
  and start broadcasting our backup exec Server iscsi hba data, but since it is only using 1 connection her bottleneck through 1 Gbps.

  If I install mpio on the backup exec server and configure the ports and mpio on the hba settings, when the san creates snapshots, the TI separate backups between the two connections of 1 GB on the hba iscis on the backup exec Server?

  what I have to do all the other configurations on the San or switch layer2 (48 1 Gbps connections) that we use for our San?
  I read somewhere that you would have to do something on the switch if you did 'aggregation of links' or 'bonding' but that mpio is completely different, and I wouldn't have to do something for her.

  any comments would be appreciated.

  Hello

  Re: Collage/circuits only is not supported by the MS. iSCSI initiator  It's in the guide to iSCSi Ms.

  RE: iSCSI hba.   What is a Broadcom iSCSI unloading mode or Qlogic iSCSI HBA?

  So once you configure the other port on the DRUNK to be on the same SAN subnet, you can use MPIO.

  You should already have installed the EQL HIT the DRINK server, is that correct?     If so, then run the Remote Setup Wizard in the Equallogic program folder.   There is an option "configure mpio.   Game to use only the iSCSI subnet, and you will see a checkbox for MPIO enabled shadow copy.  Which is enabled by default.

  Kind regards