Backup fails constantly 34%

Similar Questions

• Time Machine don't prune the old El Capitan backups and works out of space and "backup fails.

  With the help of El Capitan 10.11.1, I noticed a change in behavior with the handling of the time Machine of large files, specifically the files of virtual disk VMWare Fusion (about 50 large concerts).  After a few weeks of use of fusion VM virtual machine, Time Machine gives an error where it ran out of space and "backup failed."

  I had the same problem occur on a second iMac that I own.

  I reformatted my external drive for Time Machine and started fresh, but after a few weeks, I got the same error again.  It seems that Time Machine is not the size or remove older backups of VMware virtual disk to provide a space for the new.

  Previous versions of Mac OS X and Time Machine had no problem with the backup of large files such as these.

  Has anyone else noticed "backup failed" message with Time Machine on El Capitan?  I know that I can exclude the disk virtual VMware backup, but that defeats the entire purpose of Time Machine backups.  Any suggestions?

  Time Machine automatically deletes older snapshots to make room for the new. If your backup history is shorter than expected, it may be because you want to save one or more large files frequently.

  Software virtualization VMware, Parallels or VirtualBox creates a large virtual disk container that is constantly evolving. It will not be saved at all while the virtual machine running, and at other times it must be saved each Time Machine performance. Who fills up quickly any backup destination.

  You must exclude files from virtual drive of your Time Machine backups. To do this, click the Options button in the Time Machine preferences window. You can also do this to virtualization, application settings. Back up the files on the virtual disk within the comments system, using a native backup application.

  A compromise solution is to create a 'snapshot' of the virtual machine in the virtualization software (not a Time Machine snapshot.) This will give you a single large file that never changes and only has to be saved once. All future changes will be stored in a file that is much smaller initially, but will grow over time. You must always exclude this backup TM file. If you need to restore the computer virtual of Time Machine, you will have a working configuration, which will be easy for you to restore the rest of the data in the system of comments.

  See also this page of Parallels support.

• iTunes backup fails - Solution: conflict with ZoneAlarm

  For the last 2 months my iTunes (12.3.3) on Windows 7 has been doing more slow slow and glacial as when attaching an iPhone or an iPad (iOS 9.3) for synchronization.

  Last week, I started to receive messages from "backup failed...". "and occasional 0xE8000003 and unable to connect at all errors.

  Apple Support Articles are excellent and give you all the variants. I tried:

  (1) different cables USB-brightening

  (2) different USB ports

  (3) turn off all firewall and virus software

  (3) change the iTunes library for the last one which had sync

  (4) by removing the Lockdown folder

  (5) removing all the old backup files

  (6) replaces the backup files with those who worked from a Mac

  (7) uninstall and then reinstall all the software Apple

  (8) repeated several times in different order

  Finally, I called Apple Support... which were promptly, asked all the right questions and eventually degenerated the problem to engineering. I can't say enough good things about the apple (Attaboy Gabe and JD) support. What is particularly remarkable because my problem was clear Windows on a PC!

  In the meantime, I decided to try not only leave my protection software (CheckPoint ZoneAlarm Extreme) but uninstall. After an uninstall using 'Clean' removal of Checkpoint app, I discovered several registry entries and many services are still active. Most annoying, they have been services that I had never activated to start (ZA Privacy Service, anti-theft ZoneAlarm and Zone Alarm AntiKeyLogger). Start in safe mode, I finally could remove these services and remove all debris from the registry.

  Success. iTunes is now responsive again and fast when I plug an external device!

  The lesson learned for me coming out of the firewall and antivirus that has worked in the past to isolate conflicts as it did not remove its tendrils in Windows as advertised. Even uninstalling was incomplete and left debris.

  Zone Alarm, followed...

  "They just released a new version today which lists the indefinable Fixed: incompatibility with ITunes" in the notes.

  The previous version that caused the problem was released on February 16, 2016, but there is no information in their support on any issues site.

  ZoneAlarm is repeated consumption of abnormal resources guilty and former bad behavior with iTunes. They blocked again.

  

• Backup failed with error 18: the backup drive is not found

  Hello

  My guard time capsule saying "Backup failed" for a few days and I cannot access the old backup files either (when I enter my time machine it shows 'today', which is kind of scary, although I know that my old files is still there). I tried many ways to trouble shoot this problem, but none of this has worked. In my opinion, it's more a network problem and I made sure I connect Wi - Fi even my time capsule created.

  So far I have tried:

  -Delete the files from my internet (com.apple.airport.preferences.plist; preferences.plist and NetworkInterfaces.plist, etc.) and restart my mac

  -Remove TimeMachine.plist and restart my mac

  -Hard reset of my time capsule. Went through all configurations with success but then still backup missed (I hear the running time capsule when it is by train).

  I share this time capsule with my wife and she has no problem with that.

  I can only think of a possible alternation I did which could cause this problem.

  Because of unstable WiFi problem, I had deleted

  com Apple.Airport.Preferences.plist

  com.Apple.Network.identification.plist

  NetworkInterfaces.plist

  Preferences.plist

  or other files and reboot my mac * before * I had this problem with time capsule.

  However, this is not the first time I do it, and it wasn't a problem before...

  This could be the reason? If so, how to restore the network settings?

  Please help me with this problem. Really appreciate!

  Ted

  Here is a copy of the Console:

  24/02/16 2:44:19.308 AM com.apple.backupd [857]: from manual backup

  24/02/16 2:44:19.309 AM com.apple.backupd [857]: Destination Time machine could not be found (url: destinationID (null): AB78050D-4852-489D-9CBF-88727FBC8047)

  24/02/16 2:44:19.313 AM com.apple.backupd [857]: backup failed with error 18: the backup drive is not found.

  24/02/16 2:44:35.326 AM com.apple.backupd [857]: NAConnectToServerSync failed with the error: 64 (host is out of service) for url: afp://Ted%20Ling; AUTH=SRP@Flymi's%20AirPort%20Time%20Capsule._afpovertcp._tcp.l ALCO. / data

  24/02/16 2:45:29.976 AM com.apple.backupd [857]: attempt to mount the destination network URL: afp://Ted%20Ling; AUTH=SRP@Flymi's%20AirPort%20Time%20Capsule._afpovertcp._tcp.l ALCO. / data

  24/02/16 2:45:29.976 AM com.apple.backupd [857]: error - 35 during the resolution of the backup destination alias

  24/02/16 2:45:29.976 AM com.apple.backupd [857]: attempt to mount the destination network URL: afp://Ted%20Ling@TJ's%20AirPort%20Time%20Capsule._afpovertcp._tcp.local./Data

  24/02/16 2:45:30.668 AM com.apple.backupd [857]: destination network mounted at the mounting point: / Volumes/data using URL: afp://Ted%20Ling@TJ's%20AirPort%20Time%20Capsule._afpovertcp._tcp.local./Data

  24/02/16 2:45:50.428 AM com.apple.backupd [857]: impossible to eject the volume/Volumes/Data (FSVolumeRefNum:-111; status:-47; dissident pid: 0)

  24/02/16 2:45:50.428 AM com.apple.backupd [857]: wait 60 seconds and try again.

  24/02/16 2:45:59.981 AM com.apple.backupd [857]: NAConnectToServerSync failed with the error: 64 (host is out of service) for url: afp://Ted%20Ling; AUTH=SRP@Flymi's%20AirPort%20Time%20Capsule._afpovertcp._tcp.l ALCO. / data

  24/02/16 2:46:42.807 AM com.apple.backupd [857]: Timed out while solving Hello destination: afp://Ted%20Ling; AUTH=SRP@Flymi's%20AirPort%20Time%20Capsule._afpovertcp._tcp.l ALCO. / data

  24/02/16 2:46:42.812 AM com.apple.backupd [857]: from manual backup

  24/02/16 2:46:42.814 AM com.apple.backupd [857]: the airport of Destination Flymi Time Capsule could not be found (url: afp://Ted%20Ling;) AUTH=SRP@Flymi's%20AirPort%20Time%20Capsule._afpovertcp._tcp.l ALCO. (/ data destinationID: B2187361-58BC-4D33-A7AC-1DDC429ABF3B)

  24/02/16 2:46:42.825 AM com.apple.backupd [857]: backup failed with error 18: the backup drive is not found.

  24/02/16 2:46:42.833 AM com.apple.backupd [857]: from manual backup

  24/02/16 2:46:50.544 AM com.apple.backupd [857]: network destination already mounted to: / Volumes/data

  24/02/16 2:46:50.604 AM com.apple.backupd [857]: network destination already mounted to: / Volumes/data

  24/02/16 2:47:16.683 AM com.apple.backupd [857]: impossible to eject the volume/Volumes/Data (FSVolumeRefNum:-111; status:-47; dissident pid: 0)

  24/02/16 2:47:16.683 AM com.apple.backupd [857]: wait 60 seconds and try again.

  24/02/16 2:48:20.566 AM com.apple.backupd [857]: network destination already mounted to: / Volumes/data

  24/02/16 2:48:44.360 AM com.apple.backupd [857]: impossible to eject the volume/Volumes/Data (FSVolumeRefNum:-111; status:-47; dissident pid: 0)

  24/02/16 2:48:44.360 AM com.apple.backupd [857]: wait 60 seconds and try again.

  24/02/16 2:49:48.014 AM com.apple.backupd [857]: network destination already mounted to: / Volumes/data

  24/02/16 2:50:11.885 AM com.apple.backupd [857]: impossible to eject the volume/Volumes/Data (FSVolumeRefNum:-111; status:-47; dissident pid: 0)

  24/02/16 2:50:11.885 AM com.apple.backupd [857]: give up after 3 attempts.

  24/02/16 2:50:11.903 AM com.apple.backupd [857]: backup failed with error 21:21

  24/02/16 2:50:27.245 AM com.apple.backupd [857]: impossible to eject the volume/Volumes/Data (FSVolumeRefNum:-111; status:-47; dissident pid: 0)

  24/02/16 2:50:27.250 AM com.apple.backupd [857]: from manual backup

  24/02/16 2:50:27.250 AM com.apple.backupd [857]: Destination Time machine could not be found (url: destinationID (null): AB78050D-4852-489D-9CBF-88727FBC8047)

  24/02/16 2:50:27.257 AM com.apple.backupd [857]: backup failed with error 18: the backup drive is not found.

  24/02/16 2:52:28.390 AM SystemUIServer [265]: try using XPC with a MachService which has the value HideUntilCheckIn. This will result in unpredictable behavior: com.apple.backupd.status.xpc

  24/02/16 2:52:28.390 AM com.apple.prefs.backup.remoteservice [866]: try using XPC with a MachService which has the value HideUntilCheckIn. This will result in unpredictable behavior: com.apple.backupd.status.xpc

  What model is the TC?

  Try to force the connection to 2.4 ghz using different names for the various bands... or even better to use ethernet.

  (You may need to buy love at first sight for adapter Ethernet... is an investment worth considering how unreliable wireless).

  Also give me some screenshots of the TC installing airport utility.

  Can you get it in the Finder?

• "Backup failed" notification on Palm Pre

  I just received a notification on my phone that says "backup failed." I typed it, and he opened a message that says that my phone has not been saved since February 2, 2010. He then suggests that I press a 'Back Up Now' button that appears. I press it, and the phone just hangs. How can I get my pre back up successfully once again? I can't afford to lose my contacts in my business, and I hear, it's the "end game" for the same problem... all disappear one day.

  Help!

  You are right. Disabling backup removes only the data from the server of Palm, all data on the device will be intact.

  Re-activation backup will create a fresh new copy of the backup on the server.

• Windows Server backup failed

  Hello

  We have a problem with our Windows Server backup on our main server. It fails every night and you see disks (5 discs for each day from Monday to Friday) to be offline, even if we can access the data and restore files/folders. We tested another software to backup with one of our readers, and he was properly executed. The event log shows error event ID 561 and 546 "...". the backup failed as no target could be found... "Any ideas what is the cause? As I have said that we ran successfully backup by using one of the players and another software so I don't think it's a hardware problem.

  Thanks in advance

  K8

  This issue is beyond the scope of this site and must be placed on Technet or MSDN
  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• WHS client backup fails with an access denied error

  I have a new laptop with Windows 8.1 on which I have installed the Windows Home Server 2011 connector and configuration backups for her. Backups fail at every attempt to return that an error prevented backup to create a snapshot of the volumes on this computer.

  The event log shows event ID 8194 by the following:

  The volume shadow copy Service error: error unexpected mark of the IVssWriterCallback interface. HR = 0 x 80070005 access is denied.

  . This is often caused by incorrect security settings in the process of the writer or the applicant.

  I tried to start the VSS service and tried the backup with the same result.

  The service runs with the same parameters the service runs on a computer that registers with success.

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Backup fails and imprisons the DVD + R in machine

  Please accept my apologies if this is a dumb question with an easy answer.

  I tried to run backup on HP G61-110SE (64-bit Edition Windows 7 Home Premium) that I bought a couple of weeks. I insert the DVD and let it roll. Backup goes to about 50% (over a period of what this is between 3 and 24 hours) then either hangs or advises the backup failed or the drive is faulty somehow and I need to insert another disc. At this point, I try to eject the disc (and we tried to push the button to insert a needle) and he refuses to eject. He even lets me know that he has failed to eject most of the time, but I tend to have already achieved it.

  I need to stop the laptop and eject while it is booting. This means that I have to cancel the backup and still failed to create. Backup restore & does not recognize a flash drive as available on DVD/CD alternative. A few times I even had to pull on the plug, remove the battery, leave it for a few minutes and turn (as they said of working when HP of the work cell phone froze at startup).

  I don't think I'm stupid, but my question is, I'm a fool for trying to use DVD + R or is there something more fundamentally wrong? All I want to do is create a set of backup disks!

  Help, please

  OK everybody! Problem solved.

  Not sure that the following items, which did the trick but I would go with the last of them;

  1. the audio and video dvd which worked well, then tried to backup Sony DVD + R again and it didn't burn. Then,.

  2 disabled Norton, disconnected from all internet and associated devices, ran to the backup for about 24 hours on a DVD + RW Verbatim and it hung at 61% and wouldn't release the drive. Then,.

  3. put the ball across the screen, took the phone upstairs and threw it out the window of the bedroom. Allow the dog to throw it in the garden for 15 minutes. He dropped out of the mouth of dogs, has been replaced power cord, put another ball by keyboard for good measure. Tried to launch backup and it failed. Finally,.

  4 bought some Sony DVD-R. Disabled Norton, etc., ran backup and it worked!

  My conclusion is that, after crossing a cake about 12 25 TDK DVD + R Sony DVD + R, 6 TDK DVD + RW and 1 Verbatim DVD + RW, it is perhaps that DVD-R is the format of the disc to go.

  P.S. If someone from Microsoft or HP is reading this, it might be interesting to convey this to new purchser of your products and the authors of manuals / "help" topics If anyone from Sony is reading this, I will gladly accept a gift of a cake of replacement of DVD + R for free advertising. If anyone from TDK is reading this... Sorry, do not use your brand again. No logical reason.

• every day, the backups fail

  as a computer geek friend helped me every day that I get the message that my "last backup failed" How can I fix?

  Hello Sharon,

  This forum is for MSE.  Please repost in the Microsoft Technet forum specifically dedicated to the problems of backup: http://social.technet.microsoft.com/Forums/en-US/windowsbackup/ where the experts will be more than happy to help you.

  Good luck!

• MS Office 2007 Updates Failing constantly (error code 0 x 80070658)

  original title: MS Office 2007 Updates Failing constantly

  I am running XP Professional SP3.

  12 the following updates have been failing for some time.

  Update of security for Microsoft Office System 2007 (KB956828)

  Update for 2007 Microsoft Office System (KB960003) security

  Update of security for Microsoft Office OneNote 2007 (KB950130)

  2007 Microsoft Office Suite Service Pack 1 (SP1)

  Update for Microsoft Office System 2007 (KB967642)

  Update of security for Microsoft Office PowerPoint 2007 (KB951338)

  Update of security for Microsoft Office Excel 2007 (KB959997)

  Update of security for Microsoft Office 2007 (KB951550)

  Update of security for Microsoft Office System 2007 (KB951944)

  Update of security for Microsoft Office Word 2007 (KB956358)

  Update of security for Microsoft Office System 2007 (KB954326)

  Update for Office 2007 (KB934391)

  I tried another forum and I was told that I chose wrong. I hope I'm in the right forum.
  When I ran a diagnosis, I found the error code: 0 x 80070658.

  I need help.  Am I vulnerable?
  If these are updates old which are NOT necessary, how the update to pass as "useless"?
  Thank you

  Ronnie Vernon (Partner, MVP) Posted the:

  0x8007066F - the update is not applied to this product. -ERROR_UNKNOWN_PATCH

  Go to the next article.

  MS08-051: Description of the security for PowerPoint 2007: 12 update August 2008:
  http://support.Microsoft.com/kb/951338

  The article contains information on the components required for this update.

  More information about this security update.

  Prerequisites:

  You must have the following Microsoft Office 2007 Service Pack 1 (SP1) installed to apply this security update.
  For more information on getting the suite Office 2007 Service Pack 1, click the number below to view the article in the Microsoft Knowledge Base:

  How to obtain the latest service pack for the suite Office 2007

  http://support.Microsoft.com/kb/949585
   
  If you already have SP1 for Office 2007 is installed, then use the support options for this update which is also included in this article.
   

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

   
  North American customers can also obtain instant access to unlimited support free of charge e-mail or unlimited individual chat support by visiting the Microsoft Web site at the following address:

  http://support.Microsoft.com/OAS/default.aspx?&PRID=7552
   
  For more information about how to contact your local Microsoft subsidiary for support questions with security updates, visit the Microsoft International Support Web site:
  http://support.Microsoft.com/common/international.aspx?rdpath=4
   
  I hope this helps.

• Backup failed.

  I recently purchassed an external hard drive to back up my files.  When I tried to back up by using facility backup widows, I got the error measage:
  Backup failed.  a snapshot could not be created for the following reason: access denied (0x80070005).  I have rites of the administrator.

  Can someone explain why I can't back up to the external hard drive?

  My PC reconises the hard drive and I have successfully copied the files to the HD station.

  Hi PaulO246,

  You have Roxio installed by any chance? This program known to cause problems with the Windows backup utility to back up open files.  If so, you might want to try to uninstall it to see that it will work.  You make sure that media to reinstall the program if necessary.

  Let us know if it works for you,

  Kevin
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• File backup failed. The error is: the parameter is incorrect. (0 x 80070057).

  I get the following error when I run "back up files" and tries to access "backup setting change" (only).

  I tried most option all found on TechNet to see disp.

  No problem running "full pc upwards."

  Log name: Application
  Source: Windows Backup
  Date: 09/11/2011 11:19:55
  Event ID: 4104
  Task category: no
  Level: error
  Keywords: Classic
  User: n/a
  Computer: desktop
  Description:
  File backup failed. The error is: the parameter is incorrect. (0 x 80070057).
  The event XML:
  http://schemas.Microsoft.com/win/2004/08/events/event">
   
     
      4104
      2
      0
      0 x 80000000000000
     
      21308
      Application
      Desktop
     
   
   
      The parameter is incorrect. (0 x 80070057)
      57000780E00400005B0600005C060000420ED1665C2BEE174B64529CB14610EA71000000
   
  

  Help, please

  Phillip

  Hello

  Make the SFC (System File Checker) scan and see if the problem persists.

  http://support.Microsoft.com/kb/929833

  Hope this information helps.

• Backup failed in Vista

  Get the backup failed failed in Vista with ie8

  Read below on info make backups;

  http://www.Microsoft.com/Windows/Windows-Vista/features/backup.aspx

  Windows backup center and restoration

  http://www.vista4beginners.com/how-to-backup-your-data

  Above is a very good tutorial on how to make backups of your files.

  http://articles.TechRepublic.com.com/5100-10878_11-6179067.html

  Back up your files with the backup of files from Vista Assistant

  http://www.bleepingcomputer.com/tutorials/tutorial145.html

  How to use the Vista computer backup and restore

  And the last link is how do a full backup of the computer, if you use the right edition of Vista. for this.

  See you soon.

  Mick Murphy - Microsoft partner

• System backup fails with the error no disk space

  I have a Dell laptop with Vista. There E. internal recovery disc I saved 1/2011, but subsequent backups fail, no disk space. The previous backup should be deleted everything first?  I'm afraid to delete all files on the recovery drive for fear of a further backup failure.  If there are files already on the drive if no changes have been made their backup just jump on them and backup new files?  I'm not a computer guru so sorry if these are questions fans.

  Hello

  When you set up your computer, you must create a backup image of the Windows computer, which is like taking a snapshot of the programs, system and files on your computer settings. You can use this backup if your computer ever stops. Although this type of backup includes your personal files, we recommend that you back up your files regularly using the back up files Wizard. You must also update the Windows complete PC backup image every six months.

  If you copied the data from drive E to another location, then it is safe to delete the content in the reader.

  See: http://windows.microsoft.com/en-US/windows-vista/Methods-for-backing-up-your-files

• Backup fails with the error code 0 x 810000005

  Original title: error codes 810000005

  Backup fails with the error code 0 x 810000005

  Hi ElaineKingsley,

  ·         What is the exact error code is 0 x 810000005 or 0 x 81000005?

  ·         To the place where you are performing the backup?

  ·         Not him enough not space is available to perform the backup?

  I suggest you do the check disk (chkdsk) to the backup location.

  Check the hard disk for errors

  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

  Chkdsk WARNING: CHKDSK can repair problems related to bad sectors, lost clusters, reticulate files and directory errors. I suggest you Save the data because data may be lost in repairing this sector.

  If the error code is 0 x 81000005 see link for resolution below:

  http://blogs.technet.com/b/filecab/archive/2008/03/12/common-causes-and-solutions-to-backup-system-restore-and-complete-PC-backup-problems-updated.aspx

  Hope this information helps.