backup failure "access denied 0x80070005.

Similar Questions

• Access denied (0x80070005) when you perform the backup on a DVD

  Have backed up on DVD as the computer was new, now get this error message and always backups fail.

  Hello HDHowell,

  Thanks for the return of the response.  I have included a link below where another user had posted the same error during a backup.  Please let us know status.

  Microsoft Answers:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-performance/back-up-failed-access-denied-0x80070005/4413a008-5286-4050-BB32-0c5f7b3863fb

  Thank you

• During the restore system to a previous restore point, I got this error 'access denied 0x80070005.

  original title: 'access denied 0x80070005.

  During the restore system to a previous restore point, I got this error "Access denied 0x80070005" Any Solutions?

  During the restore system to a previous restore point, I got this error "Access denied 0x80070005" Any Solutions?

  Possibilities:

  1. you are not the administrator. You don't have to enter the admin password valid when he asked for it.

  2. you probably have the problem with the infection by the virus.

  If you ARE the admin, suggestions:

  a. run a full scan.

  b. If the machine is clean, do your Safe Mode system restore.

  How to go in safe mode?

  Restart > immediately and repeatedly tapping the F8 key until you see a black and white scree > top? Touch down arrow, and then select Safe Mode > Enter > now that you are using safe mode. Make your system restore.

• backup of Windows Vista failed due to access denied 0x80070005

  I'm try to use a WD Passport essential 320 drive (8 months) as support for my daughter Gateway laptop (about 4 years old; 2 GHZ RAM, 150GB hard drive, 100 GB of free, USB ports are 1.0 only, sigh!).    Instead of using WD Smartware, try to use the backup utility Windows Vista (Basic, 32-bit).    I followed instructions from WD on this exactly, but every time I try the backup, which takes more than half an hour in what appears to be a valid backup operation, the backup stops abruptly with an error message indicating that the backup failed.  Error message States only: 0x80070005 - access is denied.  As far as I can tell, I attributed to full sharing for the drive and the drive itself shows as a separate with no partitioning drive.   Technical support (level 1) WD told me that they think that the drive itself is correct, that the problem is with Windows and that they could not help me with Windows problems.   Themselves to level 2 has said pretty much the same thing but offered through the messages of support from MS, but neither he nor I saw patches associated with Vista, only the XP machines.  What is the benchmark for my Vista operating system?   Thank you!

  I have the same problem.  I have a WD external hard drive, I had the habit of saving on all the time with no problems.  January 2011, I have not had a successful backup and rather get moved out of the backup mid-term with error 0x80070005 access denied.  Have you ever found a solution?  I tried to turn off UAC, security, firewall, backup in safe mode, but nothing works.

• Why backup says "access denied"? It has not worked in a month!

  Last backup that worked was May 12. Now, it says "access denied."   Why? How should I do? I had no backup since May 12. I backup on a 300 GB hard drive, which I just emptied.

  Hello

  ·         You will remember to do recent changes on the computer before this problem?

  ·         What is the full error message?

  ·         You run the computer as an administrator?

  I suggest you follow the steps in the link below:

  Step 1: Run the fixit available in the link below to reset the security settings default settings

  How to restore the security settings the default settings?

  http://support.Microsoft.com/kb/313222

  If the problem persists,

  Step 2: Run a scan online for any threat and try to correct

  http://OneCare.live.com/site/en-us/Center/cleanup.htm

  If the problem persists,

  Step 3: Check with another administrator user profile

  If you do not have a different user account, you will need to create a.  If everything works fine with a different user profile, you can infer that the user profile is damaged, click on the link to find out how to solve this problem.

  Create-a-user account

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

  Difficulty of a corrupted user profile

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

• Windows Vista will not be updated to Service Pack 2 with the access denied 0x80070005 error

  I bought a new computer, and it came with Windows Vista Home Basic SP1. I've updated every day and a great success until this. When I tried to install after pressing accept on the license agreement screen, when it says computer preparation. I get an error indicating that the Installation has failed. I also tried some work around and find myself without success. So far, I turned my (even uninstalled), kaspersky internet security ran system update tool, disable most of the startup process, reset the permissions in my registry and created a new user with privileges to administrator, but when I access the user created recently, after the box at the top left corner that says personilizing (in the classic windows theme) need me just a blue screen error-free. But I can still access the Task Manager and its been like that since.

  And I also did an accesskchk command that noted:
  HKLM\software\Microsoft\Windows\CurrentVersion\Component Servicing\Retry Agent of base
  HKLM\software\Microsoft\Windows\CurrentVersion\Component base Servicing\Sqm
  HKLM\software\Microsoft\Windows\CurrentVersion\Component base Servicing\Sqm\Package_for_KB955430~31bf3856ad364e35~x86~~6.0.1.18005
  HKLM\software\Microsoft\Windows\CurrentVersion\Component base Servicing\Sqm\Package_for_KB955430~31bf3856ad364e35~x86~~6.0.1.18005\InstallCounter
  HKLM\software\Microsoft\Windows\CurrentVersion\Component base Servicing\Sqm\VistaSP2-KB948465~31bf3856ad364e35~x86~~6.0.0.18005
  HKLM\software\Microsoft\Windows\CurrentVersion\Component base Servicing\Sqm\VistaSP2-KB948465~31bf3856ad364e35~x86~~6.0.0.18005\InstallCounter

  is their anyway to fix this?

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for Windows Vista Service Pack 2 (SP2) is valid until November 26, 2009. Availability of support chat or messaging differs depending on your location. Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack). ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Access denied 0x80070005 when reinstalling Windows 7 activated

  I tried several post suggestions and nothing seems to work.  are there recent fixes for this?  In addition, I'm not presented with an option to activate by phone if not sure what number I would call even.  I'm sure that everything was fine when I finished the reinstall, but now it seems to be inactivated?

  Try to perform a repair installation:

  How to do a repair of Windows 7 Upgrade - Notebooks.com

• Access denied error 0 x 80070005 WinXP

  Dear all

  When I try to configure my computer to schedule tasks, I have install the 'time' and 'Day' and then click on OK at this point. I always wonder the password, but if I use the password or not, I still get the same message as follows:

  * An error has occurred while trying to set task account information *.
  The specific error is "access denied 0x80070005".
  You are not authorized to perform the requested operation

  Can someone help me with the answer please?
  Thanks for all the help on this.

  Hello

  Have you tried another new account of your Win operating system?
  If this is not the case, try to connect to the operating system with the user account, and then try again.
  Please don t forget to set the administrator rights for the user account.

• backup failed: 0x80070005 access denied

  For the last few months when I try to save on DVD my computer is progressing well and uses 9 discs but then finally ends with "backup failed."  The reason given is "0 x 8007005 access denied."  Someone understands this.  What can do to sort it?

  Mamahilz

  Disable your antivirus and any other security program when you perform the backup.  Run the backup administrator.  Delete the compressed backup selection files.  Not back up anything other than your C:\ drive

  Under your administrator account, recover rights fulll and take ownerhip of the totality of the C:\ drive using the following procedures.  If you can not make some folders, ignore them in greater numbers of them aren't as you can.

  To view your permissions, right-click on the file/folder, click Properties, and check the Security tab.  Check the permissions you have by clicking on your user name (or group of users).  Here are the types of permissions, you may have: http://windows.microsoft.com/en-US/windows-vista/What-are-permissions.  You must be an administrator or owner to change the permissions (and sometimes, being an administrator or even an owner is not sufficient - there are ways to block access (even if a smart administrator knows these ways and can move them - but usually should not because they did not have access, usually for a very good reason).)  Here's how to change the permissions of folder under Vista: http://www.online-tech-tips.com/windows-vista/set-file-folder-permissions-vista/.  To add take and the issuance of right of permissions and ownership in the right click menu (which will make it faster to get once it is configured), see the following article: http://www.mydigitallife.info/2009/05/21/take-and-grant-full-control-permissions-and-ownership-in-windows-7-or-vista-right-click-menu/.

  To resolve this problem with folders, appropriating the files or the drive (as an administrator) and give you all the rights.  Right-click on the folder/drive, click Properties, click the Security tab and click on advanced and then click the owner tab.  Click on edit, and then click the name of the person you want to give to the property (you may need to add if it is not there--or maybe yourself). If you want that it applies to subfolders and files in this folder/drive, then check the box to replace the owner of subcontainers and objects, and click OK.  Back and now there is a new owner for files and folders/player who can change the required permissions.  Here is more information on the ownership of a file or a folder: http://www.vistax64.com/tutorials/67717-take-ownership-file.html.  To add take ownership in the menu of the right click (which will make it faster to get once it is configured), see the following article: http://www.howtogeek.com/howto/windows-vista/add-take-ownership-to-explorer-right-click-menu-in-vista/.

  See if it works - otherwise we will check for a different solution.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Windows 7 backup could not write to disc error 0 x 80070005 network "access denied."

  I spent the last hour looking at the Knowledge Base. There just aren't clear answers, so let's try again.

  I am running Window 7 profressionelle.

  I'm doing a return upwards using the backup of Windows 7.

  Backup target is a network (Western Digital MyBookLive) drive

  I can connect to the drive mapping (z) or by using the path network (\\MyBookLive\Backup)

  Using the Explorer, I have AUTHORIZED AND CAN create, delete, and copy files. I can also create or delete directories.

  Using Windows 7 backup, I add the network drive when you are prompted, as well as the user name and password. No error on this point.

  When I run the backup, a number of xxx movies. TMP files are written to the network drive. So, the app has permission to create files.

  However, I get an "Access denied" error with an error code 0 x 80070005

  ________________________________________________________________

  Solutions 1

  "I tried a solution of the evolution of the network security: LAN Manager authentication level."

  "Send LM and NTLM & - use NTLMv2 session security if negotiated".

  It did not work.

  Solution 2

  I use Avast antivirus. I have it turned off. It did not work.

  Solution 3

  Turned off the Windows Firewall. It did not work.

  Help, please.

  Hi phwayne,

  Please see the thread with a similar problem and fix possible:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/error-code-0x80070005-backup-not-completing/989958f9-E05B-4a1a-A2A1-1c3a3347a7c3

  It seems you have tried some of the troubleshooting list, but others you can try.

  I hope this helps!

• I have 5 "MY BACKUP" folder on my drive C in 2008. How can I remove the old ones. Receiver error MSG "Access denied" when you try.

  I have 5 "MY BACKUP" folder on my drive C in 2008. How can I remove the old ones. Receiver error MSG "Access denied" when you try.

  Hi PJG_918,
   
  To resolve this problem, you must turn off Simple file sharing and then take over the folder.
   
  Here is an article that will explain the procedure to the same thing:
   
  "Access denied" error message when you try to open a folder

• SyncToy - access denied (Exception from HRESULT: 0x80070005).

  After I run SyncToy (Windows 7) I got 2 errors.

  creating folder - access denied (Exception from HRESULT: 0x80070005) 

  folder creation - cannot write to the destination file. Exception from HRESULT: 0x80070005 (EACCESSDENIED)

  How can I solve this problem?

  Hi Paul,.

  You have posted the question in the forums above?

  Alternatively, you can refer to this article for more information.

  Unknown error. Access is denied (HRESULT 0x80070005)

  http://social.Microsoft.com/forums/en-us/b720807e-29AB-4def-ba41-0fc78302406c/unkown-error-access-is-denied-HRESULT-0x80070005

  Hope this information helps.

• Error: 0 x 80007005 access denied when running Backup in windows 7.

  Made to measure-install.
  Subinacl does.
  Given permissions.
  We also changed the external hard drive...
  Need urgent help

  Hello

  Welcome to the Microsoft Vista answers Forum!

  In order to find the cause of this problem, we need a few details.

  (a) you make a full backup of the computer?

  (b) you have full file permissions to the files that you are backing up and the destination you save back to the top?

  To work around the problem, you will need to follow the steps below.

  Check the permissions of the file or folder, the file is saved in. Here's how:

  1. right click on the file or folder and then click Properties.

  2. click on the Security tab.

  3. under group or user names, click your name to see the permissions you have.

  To open a file, you must have the read permission.

  Check if the file is encrypted. Here's how:

  4. right click on the file and then click Properties.

  5. click on the tab general and then click Advanced.

  If the checkbox encrypt content to secure data is selected, you need the certificate used to encrypt the file to open it.

  If you find difficulties to perform the above steps, then you can follow the link below.

  How to open a file if I get an access denied message?

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-open-a-file-if-I-get-an-access-denied-message

  Thank you, and in what concerns:

  Suresh Kumar-Microsoft Support.

  Visit our Microsoft answers feedback Forumand let us know what you think.

• Access denied for backup external hard drive

  Hello

  I can not access my old files stored on an external hard drive Maxtor. It gives me an access denied error.

  I tried what you posted in another forum.

  Here are the steps to change the ownership and permissions:

  • 1. Right-click on the file or folder, click Properties , and then click the Security tab.
    2. Click Advanced , and then click the owner tab.
    3. Click Edit , and then do one of the following:

  ·         To change the owner to a user or group that is not listed, click other users and groups , in area enter the object name to select (examples) , type the name of the user or group, and then click OK .

  ·         To change the owner to a user or group that appears in the area of change of ownership to , click the new owner.

  4. If you want to take ownership of the contents of the folder, select the check box Replace owner of subcontainers and objects .

  5. click OK and then click Yes when you receive the following message is displayed:

  You are not allowed to read the contents of directory folder_name . Do you want to replace the the directory permissions with permissions granting you full control?

  All permissions will be replaced if you click Yes .

  Note folder_name is the name of the folder you want to take charge.

  6. click on OK and then reapply the permissions and security settings that you want for the folder and its contents.

  Additional considerations

  • • An administrator can take ownership of any file on the computer.
    • Affecting the ownership of a file or a folder might require that raise you your permissions using user access control.

  I got a laptop with Windows XP and these files have been backed up with XP as my operating system. Then I changed my laptop with Vista and cannot access files - they are just NTO open!

  Help, please!

  Hi Tdhar...  Are you able to take control by following the steps listed on the Web site below

  I take possession of the ROOT of the hard drive external and let it spread down through all the folders/subfolders and files...

  http://www.vistarevisited.com/2008/01/09/how-to-take-ownership-of-a-file-or-folder-in-Vista/

  Phreak_89

• Backup and restore (premium) Dell got a 403 - Forbidden: access denied

  When I try to access my Dell downloads on the recovery feature

  I get a web page 403-Forbidden: access denied

  Anyone know what is happening?

  See you soon

  Yes, I can do... I'm trying to reinstall the Media Suite Essentials...

  Anyway... someone directed me to a website live smartsource.dell.com/web/main.aspx

  to download the files... but now I have another problem with the download...

  The server could not process the request due to an internal error. For more information about the error, either turn on IncludeExceptionDetailInFaults (ServiceBehaviorAttribute or configuration behavior) on the server in order to send information on exceptions to the client, or turn on track in accordance with the software Microsoft .NET Framework 3.0 SDK documentation and review the server trace logs.

  Server stack trace:
  System.ServiceModel.Channels.ServiceChannel.ThrowIfFaultUnderstood (response Message, fault of MessageFault, String action, MessageVersion version, FaultConverter faultConverter)
  at System.ServiceModel.Channels.ServiceChannel.HandleReply (ProxyOperationRuntime, ProxyRpc & rpc operation)
  at System.ServiceModel.Channels.ServiceChannel.Call (String action, ProxyOperationRuntime, Boolean, Object [ins] oneway operation, Object [], TimeSpan timeout breaks)
  to System.ServiceModel.Channels.ServiceChannelProxy.InvokeService (IMethodCallMessage methodCall, operation of ProxyOperationRuntime)
  at System.ServiceModel.Channels.ServiceChannelProxy.Invoke (IMessage message)

  Exception thrown once again [0]:
  at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage (IMessage reqMsg, IMessage retMsg)
  at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke (MessageData & msgData, Int32 type)
  at SmartSource.Components.ILaunchNotifier.NotifyLaunch (String UserId)
  at SmartSource.Components.InternalProxy.NotifyLaunch (String UserID)
  SmartSource.Components.SingleInstanceApp.Run (form mainForm)
  at SmartSource.MediaManager.Program.Main)