backup in the rescue and recovery failed

Similar Questions

• How to use the rescue and recovery and product recovery discs?

  Hello world

  I just recently became a new owner of a T61 and really enjoy. I did have a chance yet to test the hotline of lenovo, as I've not yet screwed anything up if badly needing their help. I tried a factory clean reinstall from the service partition and it worked fine. I would like to know, how one uses it the rescue and the recovery boot disk and the recovery disks of the product I created myself? From my previous experience with Dell and HP, I didn't insert the one and restart the computer, and the rest followed. But the ThinkPads, if I ever wanted to bring a State own factory using these disks, can I use with rescue and recovery first, followed by the recovery of product? I'm curious, what is the difference between the two?

  art140 wrote:

  From my previous experience with Dell and HP, I didn't insert the one and restart the computer, and the rest followed. But the ThinkPads, if I ever wanted to bring a State own factory using these disks, can I use with rescue and recovery first, followed by the recovery of product? I'm curious, what is the difference between the two?

  1. Place the rescue and recovery disc in the drive, and then restart.  This disc contains the same program that you used when you restored your system from the service partition.  Once the program is loaded, you will see the same screen with the same options as before.
  2. Choose to restore your system as you did with the service partition.  You will not see an option to do a custom restore.  When the program is run from the disk, it automatically performs a full restore.
  3. The program will rebuild the service partition and copy the program files on him.  When you are prompted, insert the product recovery disks.  The compressed system and application files contained on these discs will be copied to the new service partition.  Once the copy process is completed, your system will be restored from the service partition.
  4. After restoration, you will be able to make a new set of recovery discs if you wish.  You will also be able to do a restore custom through the service partition.

  Don

• How to remove the backup files in the rescue and recovery on local drive

  I need more space on my hard drive and for a year have been backup to a drive for expansion.  However, I kept the base and a backup on the local drive. I tried to remove the base backup, since it was listed in "show all the backups" on the "local" drive However, it still appears in 'show all the backups' - in the local drive.  I see now that I actually deleted the 'base' on the USB. I see no way to delete the backups in the local drive. How can I delete the backups to the local disk?

  RNR does support only 1 location of target, in your case, local backup or USB.

  If you change the location to the USB, it will ask "delete backups on Local.  If you say no, it will keep local backups and start on USB. View backups should ONLY list target current place of residence.  In your case, USB.  You said delete Basic, yes he deleted based on USB.

  Go to the RNR, menu, advanced and post a screenshot of the view backups.  Do not use the main pane.

  (1) change the local location.  You can remove LOCAL.  Then replace location USB.

  (2) uninstall the RNR.  This will remove \RRbackups on drive C.  Replace.

  The main panel (simple opinion) may use registry values to list all backups while the Advanced menu should list ONLY the target location.

• Problem running the Rescue and Recovery 4.52 on T400

  Windows 7 Ultimate T400. Newly loaded and checked RnR 4.52. Try the first time to back up the C: drive to second hard drive. The program runs about 50 seconds and noted on C: and D: HDD external activity, but then it stops and gives the message: "the backup has completely failed." A lot of disk space. No other information not provided. Any suggestions on how to get more diagnostic information? Thank you.

  RNR is tent to call Windows VSS (volume shadow service).

  SHADOW: Call to InitializeForBackup failed - dwRet = 0x000005a4 - hrRet = 0 x 80042302

  hrRet = 0 x 80042302 is the windows return code

  dwRet = 0x000005a4 is a return code of RNR.

  Check the VSS service is started in windows services.

  Name: Volume Shadow Copy Start Type should be automatic

  Administrative Tools > services to bring up the services screen

  http://www.SevenForums.com/backup-restore/218352-volume-shadow-service-component-error-0x80042302.ht...

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/error-code-0x80042302-while-p...

  Within microsoft link is this response:

  To fix this error, go to "run" and type "services.msc".

  make sure that the following services are set to automatic:
  > 'System Event Notification Service.
  > "System event COM +".
  > "Application system COM +".
  > 'Virtual shadow copy.

• Backups of the DSO and recovery in the ASM failure.

  If the ASM instance fails and RMAN backups are on ASM diskgroup, can I still recover my database? What happens if the diskgroup goes to zero out or something like:
  
  If DD \u003d/dev/zero of = / dev/whateverASMdisk_used_for_backupsets
  
  Are my backups?

  Are my backups?

  Yes. I don't see a big difference (regarding the consequences) to "rm - rf '." Binary zeros are not a valid backup.

  Werner

• Rescue and recovery of backup fails: current drive does not match the previous backup

  I have just rebuild my T60p with a new hard drive for the recovery of Lenovo CD via the rescue and recovery CD. Once the system restore is complete and the laptop running, I took a full backup using Rescue and Recovery. This backup is the C:\ drive which was the only drive I had and was on a USB hard drive.

  In recent days I have the C:\ split in two, giving me a new D: drive, patched all system software, added my own data, and obtained the machine configuration as I want. I've also trashed the R & R hidden partition so I could make a bigger drive D:\ and created my own bootable CD R & R for future use - not that it makes a difference.

  Now, I want to take a second backup with the Rescue and Recovery tool. Naturally I want to back up the disks C:\ and D:\, but the backup fails saying: -.

  "The last backup of this system include the following drive letters: C: .

  Your system is now back up these drive letters: C: d:

  Please define drive letters, as they were before and Christine backup. You may need to exclude partitions created since the last backup. »

  Is there anyway that I can make a backup of disks C:\ so my D:\?

  The only option I see is to delete my previuos backup and I don't want to do because it can be useful in the future if I still want to restore my system to original state manufactured.

  Suggestions anyone?

  Thanks, Iain

  Given that you have saved on an external USB disk your backup will be saved in a

  the folder named RRbackups.  If you rename this file I - think - R & R going to think

  you do not have any backups, so the next backup will be a 'base '. If you

  never have to restore the original of your 'base' backup, rename the folders should allow.

• With the help of Rescue and Recovery to make backups of 3 different machines

  Hello, I have three laptop Thinkpad T400, X 61 and R61i. I want to back up by using an external hard drive. The HD is divided into three partitions, the smallest of X 61, the middle of R61i and most importantly - for T400. I backed up all my laptops in the appropriate partitions (base backups), but now, so I want to make partial backups, they go to the bigger partition (for the T400). Is it possible (and how) do R & R to always use the same partition for each laptop while safeguarding it?

  A few notes, to respond to your previous post:

  (1) Sysprep is used by administrators to deploy and image system to other machines. Basically, the system starts standalone RNR and save the image (drive C and the same HARD drive partitions) on the service partition.  Comment enumeration pleasure has to with additional partitions on the C drive HDD.  For sysprep to work, additional partitions must be of type Extended. The windows PE, is a windows "skimpy" PRE environment. For win7, the EP is based on Vista with a small set of win7 features added.  Thie PE is used for developers (as Lenovo) to install their systems.

  * None of this applies to a user at home like you and me *.

  (2) the logic used in the RNR for the GUI vs bent the advanced GUI are DIFFERENT.

  Example: the user has part C, D and E on C disk HARD drive.  Uses advanced parms to set backup (local) to go to E drive.

  If the backup through the advanced graphical interface, drive E is honored.

  If the backup is performed through simple GUI, the partition with the largest free space is used.

  Note: using the Second HARD drive don't offer NO choice to designate a partition target of \RRbackups.

  (3) view of backups.  It's clearly too.

  When a backup is performed, and RNR is locked on him, it will REFRESH the registry entries for the content of backup.dats in the \rrbackups folder. Subsequent backups of view will probably be read from the registry. That is to say no record of reloading. Simpified mistletoe might once again, just to use the registry, the locks of GUI in the new backup folder.

  (4) your letter removal/restoration

  a: I have no idea how autonomous RNR will react to the 3 folders on the second \rrbackup, IE the part 1, 2, 3.

  b. If rnr backups locked in the wrong \rrbackup folder, you will have a total mess. A symptom of this: you take a basic (full) backup, and the next backup, which should be an incremental, is actually another full backup.  This error could occur if you deleted the wrong letters.

  (5) you have a mess.

  If I save it again this PC, R & R is a point instead of a differential backup<>

  It would take a lot of work on you end to look in the backup files.  Not worth it.

  Again, the simpifed GUI backup use different logic. He likes the larger partition.

  From what you say, you used simplified and got the base of the machine backup 3 all go good part 1, 2, 3.

  Somewhere in this mess, he locked in a \rrbackups without a base backup folder and took another backup.

  who knows.

  ==

  Release notes:

  Review 4
  ----------------
  Location of backup changes when you select a smaller partition through the advanced interface of the Rescue and Recovery program.

  In the advanced interface of the Rescue and Recovery program, you select a partition more small capacity on your local hard drive as the backup location. Then, you switch to the simplified interface to create the backup. However, the backup is created on the partition with the highest capacity.

  To resolve this problem, back up your system in the advanced interface of the Rescue and Recovery program after you have selected the backup location.

  ===

  The solution is the cleanest way to follow. I would always use the GUI advanced for now on.

• Rescue and recovery blocks for hours at 0% of backup

  Hello

  My R61 ran quite OK, but slower over time. I got through rescue and recovery made a backup of the entire system on an external hard drive. (I had come back to XP and recently did a total system backup on the external HD). So I haven't started the rescue and recovery, thinking that he should simply reinstall it previously saved system. Alas at step 2 the progress of rescue and recovery, the new generation of the system stopped. Black screen with the message: «backup system is...» 0 % ». Here I wait for hours. Nothing progesses.

  What should I do? Island of 'progress' is already happening for 6 hours! (I see that my external HD flashes from time to time, but the computer does not seem to do anything).

  What should I do? I fear that if I press the power button to restart the computer, I will plant it completely.

  Please help me!

  Thanks in advance

  Roger

  Rescue and recovery hung several times for hours. Yet, it seemed to work after 20 hours. Puhhhh...

  Lenovo at: Your UI during the rescue and recovery process is ineffective. He left me without any feedback for hours. Almost, I rebooted the computer during critical backups. Here you certainly should help the user to understand what to do and what not. How can I find out, it's OK to have a bar saying 0% progress made for 8 hours.

  Even now, I don't know what to do. The computer restarts, windows is OK. But now I can turn off the computer or is always something during rescue and recovery. The last time, he says, it is step 2 on a total of 5 steps. Is it still now something in the back? The rescue is complete? Where is the message telling me, he did the job.

  All users: be patient, do not hit anything it either by running a rescue and recovery.

  Lenovo: By the way, I had - after installing my computer with xp - makes a backup of the system. that I repeated it several times. When my HD arrived full, I remove some of the older versions, because anyway, I had the newer versions which worked perfectly. Alas, I didn't, which obviously rescue and recovery done a system save, later versions are simply updated. By removing the first version, I lost all the! So, I ended up having no actual backup of a validating at the beginning.  In short: Rescue and Recovery can be a tool very well for an IT expert. For the average user, there are much too many traps. Lenovo: Try to it you like-centered-design user instead of the user Board Chinese garbage, if in the future, you want to keep as «almost IBM» brand name For me, Lenovo - in this regard - is more "almost Chinese It-garbage".

• Failed to uninstall Rescue and Recovery version 4.3

  Hello

  I'm trying to install Windows 10 on my Lenovo T510 laptop running System 7.  The Setup program indicates that the software Lenovo Rescue and recovery 4.3 as not compatible with Windows 10.  Accordingly, I am prompted to uninstall this program.

  When you try to uninstall this program, I get the error message.  Error 1316.  The specified account already exists.

  That - what it means and how do I remove it so I can complete uninstallation of the software?

  Thank you

  T

  I have updated the Rescue and Recovery program to the latest version.  She made an attempt to "update" of the old version, but in the end, I got two installed versions.  That said, I was then able to "Uninstall" the old version 4.3.

  Shortly after I had a transparent update for MS Windows 10.  Everything is good on this end and my machine is running wonderfully well with the new OS...

  Thanks for the tip...

  TT

• Rescue and recovery X 1 Win10PRO carbon

  Just got a X carbon 1 and modernized to win 10

  1)

  Wanted to use the system to make a picture, but I got

  ERROR: "there was a failure while compacting the virtual disk on the backup location. (0 x 80780151)

  Googled around, bu tno solution.

  Anyone know when it will be solved?

  2)

  And another problem. I am IBM and Lenovo user for several years, and the best backup system I've ever used is the rescue and recovery. After getting my new X 1 carbon with 8.1 Pro I upgraded to 10 Pro and if you come for the Lenovo of installation I clicked for works RandR 4.52, which proved in the software Lenovo, but unfortunately it download, unpack and then stops. Without any news. So I started the Setup file myslef, and... my God... it can not be installed!

  I'm angry.

  Why Lenovo not tell us this? And if she came, when is it ready?

  Lenovo Solution Center, if you use win8 or win 10, should offer NOT RNR as a backup option.

  If would be nice if they removed the advertising, "it takes a HDD to take backup more," store here.

  To win 10, I would like to start off the coast with a windows image backup.  Apparently, windows launched LSC backup, and you got the return code that you noted in the initial post. Backup Windows runs fast, but it lacks many features of RNR.

  I would like to run windows backup from the Control Panel, which you have done already. Some of the windows backup return codes and error messages, can be deceiving.  Check the EVENT VIEWER after windows backup error, to see if other return codes are present.

  Example: "you do have not enough free space on the device target to perform a backup' RC = 0 x 00000.

  Further, the question was NOT enough free space in the lecteur_systeme windows backup staging a zone index for vs.

  I would check the available in System_drive freespace.  This can be a hidden partition.  You need at least 200 MB freespace.

  A google search of the return code that State you have many successes.  I have try the backup, check the event viewer for VSS fail return code, which is passed back to backup windows.  If you have a VSS error, I would google search on the return code from VSS, windows backup not the return code.

• Question of rescue and recovery, and Client Security solution

  I have a thinkpad edge e220s for home use and I am trying to understand that these two thinkvantage tools will be of no use to me since I'm not on a corporate network or whatever it is (all marketing materials HE mentions admins etc.).

  Is the rescue and recovery just a backup solution with imaging of disk (as ghost)? I use a drobo for all my data storage, so I am not too concerned about backups as the drobo offers redundancy in the event of disk failure. The laptop has a SSD which doesn't have a lot of capacity if I don't want unnecessary tools that will have a lot of space. However if the rescue and recovery offers really useful features then I might consider its installation (and not using the backup feature). I could not make out what marketing materials meant by the solution of a single button for viruses and crashes.

  Second, the client security solution features other than Vault/Manager password on my model? I'm already using the beta version of the new (4) version of password manager which is autonomous and requires no client security solution. Again once the marketing material does not help a user at home like me understand very well.

  Any help will be appreciated!

  Based on your description I don't think rescue & recovery or Client Security Solution any value for you.

• Rescue and Recovery

  Hello I have a new W520 with windows 7

  I tried several times to back up my files with an external USB with the RESCUE and RECOVERY

  After many hours of backup, I get the following message:

  "The backup was not completely successful."

  Until the error message is told that he cannot back up my file of Emails.

  I have re-uploaded the RESCUE and RECOVERY software and I get the same error message.

  Thank you

  Joseph

  
  

• IBM ThinkPad T43: Rescue and Recovery question

  Hello

  I have an IBM ThinkPad T43. The Rescue and Recovery program opens whenever I turn on my laptop after a failed attempt to restore my laptop to factory settings. I cannot even connect on Windows, because the Rescue and Recovery program opens upwards immediately after I turned on the power. I tried to restore my system to factory settings using the program and the product recovery disc I bought at Lenovo, in the hope of resolving the issue, but every time I'm prompt "IBM could not restore your system.

  How can I stop Rescue and Recovery of the opening and resume with normal startup in Windows? What should I do so that I am able to restore my laptop to factory settings?

  Please help if you have any suggestions. I appreciate it greatly! Thank you!

  You can use this TI pc doc disk bootable http://support.lenovo.com/en_US/downloads/detail.page?LegacyDocID=MIGR-56222 its been a long time since I used it, but I think that in the top right there is a tab that says utilities or something like that you can wipe the HARD drive from there as I've always used the quick option worked for me

• Lenovo 3000 N200 - cannot access Rescue and Recovery - MBR poss problem?

  I have a Lenovo 3000 N200 sick who was running XP home. I could not start XP and can only access the Rescue and Recovery utility in the Lenovo recovery Partition that would be to rebuild the hard drive to factory settings IE. Windows XP with no data. I managed to copy the data using a Paragon backup cd and then made the fatal mistake of attempting a repair MBR, which was a very tempting option on the Paragon rescue cd. Now, not only it does not boot to XP, but I can run is even more Rescue and Recovery to reinstall XP which is the problem!

  If I boot with windows install disc and take the option recovery console it stops, statement that "recovery console could not find the hard drives connected to your computer. Setup cannot continue. "

  I was wondering if someone another backup MBR restore could help me with this?

  So, if someone has a Lenovo 3000 N200 work and is willing to try to save the MBR to send it to me, then please get in touch. It is probably useful to make a backup for yourself where the same problems happen to you!  In my view, there are a bunch of programs that backup the MBR for example MBRtool, MBRWizard and so on.

  Any ideas, offer accepted with gratitude.

  Yes I know I could buy the Lenovo recovery disk, but it is a matter of principle for me avoid paying £50 or so if I can avoid it! We'll see if we can help here...

  Thank you

  Simonides

  I am pleased Andyp!

  The solution was to set the primary partition to inactive and value the recovery partition Active, then restart and use the Lenovo Care button (now finally works) to access the function of recovery so I could return the laptop to factory State.

  No doubt there are plenty of ways to do it, but the approach I took to solve this problem is released under

  1. use another PC to download Paragon backup and restore (I actually used the trial edition now but the free edition may have a similar feature)

  2nd burn a CD bootable backup and recovery 10.0.

  3. start the CD Lenovo, and after a long wait, a menu should appear with 11 options, the first of them being Paragon backup and restore.

  4. Select Paragon backup and restore.

  5 select properties in the pick a task window and you will see two partitions, a big enough (in my case Go 143, called Preload) and the other is quite small (6 GB called SERVICEV001).

  Note: this is an opportunity brilliant to use the Back Up Partition option to make a backup on external drive USB of the two partitions as the reconstruction of the hard drive with Lenovo Care button you will lose all data.

  6 right-click the partition preloads and select Edit and set idle

  7. made the SERVICEV001 partition right click and select Edit and set the Active

  8 remove the backup and recovery of CD and put it somewhere safe

  9. restart the PC and Lenovo Care button (might be called something different) should now work, allowing you to restore the hard drive to factory settings which will erase all data of a personal nature. You did a backup?

  10 Windows should then start as usual, reinstall Paragon backup and restore, and restore your data.

  Finally, look at this as a lesson to

  (a) you get a writable DVD and use the Lenovo menu under windows to create a floppy disk from Lenovo rescue and recovery started.

  (b) use Paragon or equivalent to create copies of images of each partition and ordinary differential copies of the primary partition.

  I hope this will help other owners who have a hidden rescue for example partition. IBM and HP and would like to receive feedback.

  Finally, I must acknowledge assistance patient e-mail provided by Taisia Smirnova Paragon support by offering me this solution.

  best, Simonides

  (If you found this helpful please click on the star to give me a point Bravo!)

• Impossible software update think Ventage Rescue and Recovery - pls help!

  Hello!

  My problem is, when I try to install the new version of Rescue and Recovery (tvtrnr42_1016hu)

  Unpacking, extracting ok after I give a following message appears: The Rescue and Recovery program is already installed on your computer. You must uninstall the current version of the program Rescue and Recovery by using the "Add/Remove Programs" utility locatec in Control Panel before you can continue with this situation. OK and complete the set up of InstalSheed.

  When I try to uninstall the InstalSheed RR doesn't ' t find the rescue and the Recovery.msi in the C:\WINDOWS\Downloaded facilities {7D7928D2-33A2-425F-B393-4F67E0D53EE2}------folder. I manually search for and choose this folder and files, but program, it is not even, and I can't remove it.

  What can I do? Whare can I dovnloaded the correct msi file? Now I have the 3.01.1037.00 version.

  Thank you answare.

  Winti

  Hello

  do not expect a response from the community of English language for this problem.

  When you install R & R, it checks the language of your computer. I tried to install the English version, but failed. Then I downloaded the french version and it went well.

  National language support...

  Hope this helps, Jacques