Backup Oracle using AIX cmds

Similar Questions

• Is it possible to start a backup by using the CMD prompt?

  Hello, I would like to know if the backup and restore in Windows 7 can be run from a CMD/command prompt window.

  Also, I would like to know if an auto-stop can be run after completing a backup.

  Thank you very much in advance!

  ZX81

  Hello, I would like to know if the backup and restore in Windows 7 can be run from a CMD/command prompt window.

  Also, I would like to know if an auto-stop can be run after completing a backup.

  Thank you very much in advance!

  ZX81

  Absolutely! However, depending on the version of Windows 7 you are using, you get a different program (and the outcome).

  Windows 7 Ultimate and Pro contain a new backup program (replaced ntbackup) called wbadmin.exe. Here is the info on it use.
  If you have an other versions, you're stuck with a different program. You can start from a command line, but it only that launch the GUI.

  If you wbadmin, you can plan things with the Scheduler task (including a stop after) VP Tech Services

• Combining three versions in a single backup file using the batch client/config file

  Hello again,

  Is there anyway to get three versions in a single backup file using a config file and the batch client, currently we have this Configuration file:

  [General]

  Operation = Multiple

  Username =

  Password =

  URL = net. TCP://localhost: 5210, Oracle, Drm, ProcessManager

  LogFileName=D:\DRM\VIPTBAU\LOG_FILES\logfile.log

  [Activities]

  OperationCount = 3

  Operation1 = VIP_DIMENSIONS

  Operation2 = ACCOUNT_RF

  Existence3 = ACCOUNT_BS

  [VIP_DIMENSIONS]

  Operation = Backupversiontofile

  Connection = MONTH_END_BACKUP

  VersionAbbrev = TESTPROJ_VIP_DIMENSIONS

  filename = VIP_DIMENSIONS

  [ACCOUNT_RF]

  Operation = Backupversiontofile

  Connection = MONTH_END_BACKUP

  VersionAbbrev = TESTPROJ_RF_ACCOUNT

  filename = VIP_DIMENSIONS

  [ACCOUNT_BS]

  Operation = Backupversiontofile

  Connection = MONTH_END_BACKUP

  VersionAbbrev = TESTPROJ_BS_ACCOUNT

  filename = VIP_DIMENSIONS

  
  

  which generates three separate files. We tried using a single operation and listing the 3 times of the VersionAbbrev, but that didn't work and also list the 3 versions in a VersionAbbrev.

  If anyone has any ideas they would be greatly appreciated

  See you soon

  Chris

  Hi Chris Harris-Oracle

  DRM client batch supports export several versions of a single file and restore it back. You must specify the defined version name and the delimiter.

  You can configure the cfg below the backup file

  [General]

  Operation = Multiple

  Username =

  Password =

  URL = net. TCP://localhost: 5210, Oracle, Drm, ProcessManager

  LogFileName=D:\DRM\VIPTBAU\LOG_FILES\logfile.log

  [Activities]

  OperationCount = 1

  OP1 = VIP_DIMENSIONS

  [VIP_DIMENSIONS]

  Operation = Backupversiontofile

  Connection = MONTH_END_BACKUP

  VersionAbbrev = TESTPROJ_VIP_DIMENSIONS, TESTPROJ_RF_ACCOUNT, TESTPROJ_BS_ACCOUNT

  filename = VIP_DIMENSIONS

  Delimiter = comma

  to restore

  [VIP_DIMENSIONS]

  Operation = RestoreVersionFromFile

  Connection = MONTH_END_BACKUP

  SourceVersionAbbrev = TESTPROJ_VIP_DIMENSIONS, TESTPROJ_RF_ACCOUNT, TESTPROJ_BS_ACCOUNT

  TargetVersionAbbrev = TESTPROJ_VIP_DIMENSIONS, TESTPROJ_RF_ACCOUNT, TESTPROJ_BS_ACCOUNT

  filename = VIP_DIMENSIONS

  Delimiter = comma

  Try it tested and it works very well

• Restore files, backup created using Vista, you try to restore using XP

  I've known a failuren hard drive on my laptop running Vista Ultimate.  I have a backup on an external hard drive.

  I'm still hoping that I can recover data from faulty hard disk, but it doesn't look promising.

  In the meantime, I'm trying to restore the backup files using my previous laptop, which is running XP.  When I try to select the files to restore by using the backup/restore application, it can't find all the appropriate files.  He seems to want a file with an extension "BKF", but I can't find the external hard disk.

  Any suggestions?

  Thank you in advance.

  David

  Problem solved, thanks to those who put suggestions on the forums.

  David

• Can I restore a backup made using Windows OneCare Backup now that it has been discontinued?

  I am running Windows Vista and need to restore files from a backup made using Windows OneCare backup before it was abandoned.  Is it possible to do this?

  http://social.Microsoft.com/forums/en-us/onecarebackupandrestore/threads

  Windows Live OneCare Backup and restore

  They will help you with this question in the Forum in question above.

  See you soon.

  Mick Murphy - Microsoft partner

• How can I activate my wifi on the use of cmd card?

  How can I activate my wifi on the use of cmd card?

  Hello Siphomangena,

  Thanks for posting your query in Microsoft Community Forum.

  If you want to enable the Wi - Fi adapter, try the following steps. However, it does not activate or disable the driver of network installed on your computer.

  1. Go to Start, click all programs and open the Accessories.
  2. Right-click on command prompt in the list programs, and then select run as administrator. If you are prompted for an administrator password or for confirmation, type your password, click OK, or alternatively, click Yes.
  3. In the command prompt, type the following command and press ENTER:
     netsh interface set interface name ="Local area connection"enable

     Note: replace the Local network connection with the name of your card, for example, the wireless network connection.

  4. This allows you to Wi - Fi adapter.

  Corollary: Replace 'activate' with 'disable' in the command in step 3 to disable the Wi - Fi adapter.

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• How plan 2 separate backup jobs using Windows 7 backup & restore?

  How plan 2 separate backup jobs using Windows 7 backup & restore? I would like to back up some files more frequently than others.

  Hello CasPhillips,

  Try to use Task Scheduler to schedule two separate backups.

  Otherwise, you may need to use a 3rd party backup solution.

  Thank you

  Marilyn

• MySQL to Oracle using LKM SQL to Oracle, poor performance

  Hello

  I'm on the underside of technology.

  I'm try to use ODI to import data from MySQL to Oracle using the LKM SQL to Oracle, it works well for small amounts of documents but once volumes go higher it performs very badly.

  I'm replacing an integration of existing HS dblink to 44 seconds and ODI is 9 minutes.

  The MySQL and Oracle DB are on the same host with an autonomous ODI agent on the same host.

  MySQL 5.6.21

  Oracle 11.2.0.4

  Oracle Data Integrator 12.1.3

  I may try a different approach to dumping the MySQL table to a flat file and import from external table or sqlldr but y at - it a way to make the LKM SQL for Oracle perform better?

  Hello

  This problem has been resolved.

  I was setting the table sizes in batches on the data source server, after you set the values on the target data server is it now works as expected.

  Using a value of 5,000 for the two tables has reduced the operating time of 9 minutes to about 40 seconds.

• Backup Oracle DB fails with errors.

  Hi all
  
  My backup oracled via Netbackup fail with error 6 (Netbackup) and I have checked that the logs please find the log RMAN so file.
  
  Please help me to solve this error.
  
  
  Script /opt/rman_script/st72_oracle_full.sh
  = began may 28 Mar 15:27:46 SGT 2013 =.
  
  
  RMAN: / OraBase/V10203/bin/rman
  ORACLE_SID: ST72
  ORACLE_USER: oracle
  ORACLE_HOME: / OraBase/V10203
  
  NB_ORA_FULL: 1
  NB_ORA_INCR: 0
  NB_ORA_CINC: 0
  NB_ORA_SERV: zsswmasb
  NB_ORA_POLICY: bsswst72_oracle_daily
  
  Full backup asked
  Sun Microsystems Inc.     SunOS 5.10 generic January 2005
  You have new messages.
  RMAN > 2 > 3 > 4 > 5 > 6 > 7 > 8 > 9 > 10 > 11 > 12 > 13 > 14 > 15 > 16 > 17 > 18 > 19 > 20 > 21 > 22 > 23 > 24 > 25 > 26 > 27 > 28 > 29 > 30 > 31 > 32 > 33 > RMAN > ED.
  
  connected to target database: ST72 (DBID = 990954548)
  connected to the recovery catalog database
  
  RMAN > 2 > 3 > 4 > 5 > 6 > 7 > 8 > 9 > 10 > 11 > 12 > 13 > 14 > 15 > 16 > 17 > 18 > 19 > 20 > 21 > 22 > 23 > 24 > 25 > 26 > 27 > 28 > 29 > 30 > 31 > 32 > 33 >
  allocated channel: ch00
  channel ch00: sid = 149 devtype = SBT_TAPE
  channel ch00: VERITAS NetBackup for Oracle - version 6.0 (2007070504)
  
  command sent on the channel: ch00
  
  From backup may 28, 13
  output channel: ch00
  RMAN-00571: ===========================================================
  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
  RMAN-00571: ===========================================================
  RMAN-03002: failure of the backup to 28/05/2013 15:27:51 command
  RMAN-03014: implicit recovery catalog Resync failed
  RMAN-06004: error ORACLE recovery catalog database: RMAN-20035: invalid high recid
  
  RMAN >
  
  Complete recovery manager.
  
  Script /opt/rman_script/st72_oracle_full.sh
  = ended by mistake may Mar 28 15:27:51 SGT 2013 =.
  
  =========================================================== ==================================================
  
  
  
  
  
  Script /opt/rman_script/st72_oracle_full.sh
  = began may 28 Mar 15:24:28 SGT 2013 =.
  
  
  RMAN: / OraBase/V10203/bin/rman
  ORACLE_SID: ST72
  ORACLE_USER: oracle
  ORACLE_HOME: / OraBase/V10203
  
  NB_ORA_FULL: 1
  NB_ORA_INCR: 0
  NB_ORA_CINC: 0
  NB_ORA_SERV: zsswmasb
  NB_ORA_POLICY: bsswst72_oracle_daily
  
  Full backup asked
  Sun Microsystems Inc.     SunOS 5.10 generic January 2005
  You have new messages.
  RMAN > 2 > 3 > 4 > 5 > 6 > 7 > 8 > 9 > 10 > 11 > 12 > 13 > 14 > 15 > 16 > 17 > 18 > 19 > 20 > 21 > 22 > 23 > 24 > 25 > 26 > 27 > 28 > 29 > 30 > 31 > 32 > 33 > RMAN > ED.
  
  connected to target database: ST72 (DBID = 990954548)
  connected to the recovery catalog database
  
  RMAN > 2 > 3 > 4 > 5 > 6 > 7 > 8 > 9 > 10 > 11 > 12 > 13 > 14 > 15 > 16 > 17 > 18 > 19 > 20 > 21 > 22 > 23 > 24 > 25 > 26 > 27 > 28 > 29 > 30 > 31 > 32 > 33 >
  allocated channel: ch00
  channel ch00: sid = 143 devtype = SBT_TAPE
  channel ch00: VERITAS NetBackup for Oracle - version 6.0 (2007070504)
  
  command sent on the channel: ch00
  
  From backup may 28, 13
  output channel: ch00
  RMAN-00571: ===========================================================
  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
  RMAN-00571: ===========================================================
  RMAN-03002: failure of the backup to 28/05/2013 15:24:34 command
  RMAN-03014: implicit recovery catalog Resync failed
  RMAN-06004: error ORACLE recovery catalog database: RMAN-20035: invalid high recid
  
  RMAN >
  
  Complete recovery manager.
  
  Script /opt/rman_script/st72_oracle_full.sh
  = ended by mistake may Mar 28 15:24:34 SGT 2013 =.
  
  
  =========================================================== ===================================================
  
  
  
  
  
  
  Script /opt/rman_script/st72_oracle_full.sh
  = began may 28 Mar 14:59:30 SGT 2013 =.
  
  
  RMAN: / OraBase/V10203/bin/rman
  ORACLE_SID: ST72
  ORACLE_USER: oracle
  ORACLE_HOME: / OraBase/V10203
  
  NB_ORA_FULL: 1
  NB_ORA_INCR: 0
  NB_ORA_CINC: 0
  NB_ORA_SERV: zsswmasb
  NB_ORA_POLICY: bsswst72_oracle_daily
  
  Full backup asked
  Sun Microsystems Inc.     SunOS 5.10 generic January 2005
  You have new messages.
  RMAN > 2 > 3 > 4 > 5 > 6 > 7 > 8 > 9 > 10 > 11 > 12 > 13 > 14 > 15 > 16 > 17 > 18 > 19 > 20 > 21 > 22 > 23 > 24 > 25 > 26 > 27 > 28 > 29 > 30 > 31 > 32 > 33 > RMAN > ED.
  
  connected to target database: ST72 (DBID = 990954548)
  connected to the recovery catalog database
  
  RMAN > 2 > 3 > 4 > 5 > 6 > 7 > 8 > 9 > 10 > 11 > 12 > 13 > 14 > 15 > 16 > 17 > 18 > 19 > 20 > 21 > 22 > 23 > 24 > 25 > 26 > 27 > 28 > 29 > 30 > 31 > 32 > 33 >
  allocated channel: ch00
  channel ch00: sid = 136 devtype = SBT_TAPE
  channel ch00: VERITAS NetBackup for Oracle - version 6.0 (2007070504)
  
  command sent on the channel: ch00
  
  From backup may 28, 13
  output channel: ch00
  RMAN-00571: ===========================================================
  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
  RMAN-00571: ===========================================================
  RMAN-03002: failure of the backup to 28/05/2013-14:59:36 command
  RMAN-03014: implicit recovery catalog Resync failed
  RMAN-06004: error ORACLE recovery catalog database: RMAN-20035: invalid high recid
  
  RMAN >
  
  Complete recovery manager.
  
  Script /opt/rman_script/st72_oracle_full.sh
  = ended by mistake may Mar 28 14:59:36 SGT 2013 =.
  
  
  
  ===============================================================================================================
  
  
  
  Thank you
  Noelie

  Hello;

  Note on this here:

  http://pythianpang.WordPress.com/2007/11/20/RMAN-20035-invalid-high-RecId/

  Best regards

  mseberg

• How Oracle use Index?

  RDBMS 11.2.0.3
  
  Hi all
  
  Suppose I have create the following table and the primary key:

  CREATE TABLE DUMMY_I( BOC NUMBER, START_TIME DATE, END_TIME DATE);
  
  ALTER TABLE DUMMY_I  
  MODIFY (BOC NOT NULL);
  
  ALTER TABLE DUMMY_I  
  MODIFY (START_TIME NOT NULL);
  
  ALTER TABLE DUMMY_I
  ADD CONSTRAINT DUMMY_I_PK PRIMARY KEY 
  ( BOC, START_TIME) ENABLE;

  A query with Oracle will use a PK Index:

  SELECT * FROM
  DUMMY_I 
  WHERE BOC = :v01
  AND START_TIME = :v02

  But the my dobout is when I need to add field in my query:
  

  SELECT * FROM
  DUMMY_I
  WHERE  BOC = :v01
  AND START_TIME = :v02
  AND END_TIME != :v03

  In the example above: how to create an Index to optimize my request?
  
  Given that BOC and START_TIME already have an index. Then I should create an Index unique addition field END_TIME and Oracle will use both indexes to optimize my request?
  Or
  I need to create a new Index with BOC, START_TIME, END_TIME?

  Hello

  Take a look at this, especially the Index scan to the chapter

  http://docs.Oracle.com/CD/E29597_01/server.1111/e16638/optimops.htm#autoId9

  Oracle uses indexes in several different ways, which will have much more to understand than a forum thread
  of course, if you have a specific question, pull :)

  on your original question:

  both cases are possible, but

  (a) index on BOC, START_TIME, END_TIME - its pretty simple so that it works and as simple good

  (b) index on BOC, START_TIME and END_TIME index
  Oracle can (but not necessarily will!) use both indexes in a JOIN INDEX, also a long time that you reference that these and any additional unindexed columns (if there is one)

  Given this example with queries, one is more appropriate here, but he cannot say in general.

• Error comparing to the catalogs using runcat.cmd

  Hello
  
  I'm trying to compare catalogs using runcat.cmd, it gives me the error below.
  
  Missing or bad option '-outputFile ".
  
  The syntax I use:
  
  runcat.cmd cmd-diff reference c:\sample1-dernieres c:\sample2 - outputfile c:\output1.txt-dossier / shared - detail of verbosity
  
  Example in Help:
  
  runcat.cmd/runcat.sh cmd-diff reference c:\temp\eba795-dernieres c:\temp\eba796 - outputFile c:\temp\diff.txt-dossier/shared/ventes: / shared/Financials - details of verbosity
  
  Need help on this.

  Try the below command
  runcat.cmd cmd-diff reference c:\dd\sampleapplite-dernieres C:\dd\SampleApp - outputFile C:\dd\one.txt-dossier / shared - detail of verbosity

  The difference between your's and my order is: f is upper CASE for the argument to put in a file
  -outputfile should be like
  -outputFile

  Appreciate if you score as correct :)

• Error removing snapshot using vmware-cmd on ESX 3.5

  Hello VMware specialists,.

  whenever I try to delete a snapshot using vmware-cmd ("" / usr/bin/vmware-vim-cmd vmsvc/snapshot.remove vmid ' ") I get the following error:

  {(vmodl.fault.InvalidArgument)

  dynamicType = & lt; unset & gt;

  invalidProperty = & lt; unset & gt;

  MSG = "a specified parameter was not correct.

  "

  }

  What is the problem?

  Can someone help me?

  thx a lot

  Rilli

  You have more than one snapshot? in this case, you will need to provide arguments to inform additional cli command which instant you want missing. If you want that all went snapshots just use

  VMware-vim-cmd vmsvc/snapshot.removeall vmid

  Use the following command to get more information on the State of snapshot for VM

  VMware-vim-cmd vmsvc/get.snapshotinfo vmid

• Exporter security forms of planning using exportsecurity.cmd

  Is there a way to export only the security information forms planning using exportsecurity.cmd? I use planning 9.3.1.2.
  I can export the dimension level, group level and user-level security. I'm not able to find a way to export only the safety of the form.
  Any suggestions?

  Ahhh if it actually exports the security in the form of your original post, I got the impression that you could not
  anyway in 11, you can specify the type of artifact and for forms is SL_FORM, the query I've provided should extract just a security against the forms.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• How dynamically update the role of oracle using the trigger

  How dynamically update the role of oracle using the trigger:
  
  I have svmanger owner of schema in the database. There are five tables belonged to svmanager.
  
  Table A, B, C, D, E.
  
  I have a role that is played only to these tables under the scheme: SVMANAGER_READ_ONLY
  
  now, if I create a new table F under svmanager. the role that svmanager_read_only does not work is updated, so the user had assigned role cannot access table F.
  
  is there a way to create the trigger for this role dynamically update any when a table is created or deleted?
  
  Thank you.

  I really really really don't suggest to do this - it's a bad habit. If possible I'd just adding the grant as part of the steps to the role on the new creation of the table.
  But for fun here's how you can accomplish this:

  create or replace procedure execute_grant(v_ddl in varchar2)
  is
  begin
     execute immediate v_ddl;
  end;
  /
  

  create or replace trigger catch_create_table_trg after create on schema
  DECLARE
  
  ddl_job number;
  ddl_str varchar2(50);
  begin
     IF ora_dict_obj_type = 'TABLE' THEN
  
         ddl_str := 'GRANT SELECT ON '||ora_dict_obj_owner||'.'||ora_dict_obj_name||' TO SVMANAGER_READ_ONLY';
  
         dbms_job.submit(job => ddl_job,
         what => 'execute_grant(''' || ddl_str || ''');',
         next_date => sysdate+(5/24/60/60));
  
     END IF;
  end;
  /
  

  Test it

  create table F (id number(1));
  

  Validate

  select * from ROLE_TAB_PRIVS where ROLE = 'SVMANAGER_READ_ONLY';
  

• Unable to export of form data using FormDEfUtil.cmd

  Hi all
  
  I am not able to make the export of form data using FormDEfUtil.cmd.
  
  D:\hyperion\planning\bin\FormDEfUtil.cmd export < formname > localhost < appname > admin password
  
  I get this message when tried the script above in cmd invite below.
  
  use: HspFormDefUtil < import/export > < filename/formname /-all > < Server > < username > < password > < application >.
  
  Any help is appreciated.
  
  Thank you!!
  
  Rev

  It is certainly the correct admin account details, you can log in with the details of account planning

  See you soon

  John
  http://John-Goodwin.blogspot.com/