Backup PIX in Flash image

Similar Questions

• I get a message that says that it is not backup because the backup of the disk image is already in use

  I get a message that says that it is not backup because the backup of the disk image is already in use

  If you have a Time Capsule...

  Make sure that no other Macs back up when

  Pull the power cord to the back of the time Capsule

  Count to ten

  Reconnect the power cord to the back of the time Capsule

  Wait a few minutes and try a backup

  Report on the results

• I have a laptop Toshiba Satellite L305-S5894 with Windows Vista Home Premium installed (32 bit). Unable to get a backup to a flash drive. Error: 0 x 81000029

  Original title: I have a laptop Toshiba Satellite L305-S5894 with Windows Vista Home Premium installed (32 bit).  Unable to get a backup to a flash drive.

  After back back, very many updates of windows, my computer is full of problems and it is not representative of the restore points far enough back to correct.  I want really to save my data and programs for flash drive (s) and then go for a full recovery of the system (return to factory).  When you try to do the backup on a 4 GB USB key I get an error including 0 x 81000029.  I have seen posted answers to this.  Everything is included to aid Vista disk from the window which was not included when I bought my computer. Any help would be appreciated.

  Hello

  The following article should be useful. To use system recovery options, you have Vista installation disc. OEM (Original Equipment Manufacturer) repeatedly will install on the computer Windows recovery environment. To cross check if it is installed, try the following steps.

  1 start the computer and press the F8 key continuously to get advanced boot menu options.
  2. on the menu advanced startup options, check if the Startup Repair tool is in the list.
  3. If so, select it and press ENTER.
  4. If not, then you should organize a Vista installation disc.

  You may receive error messages when you try to perform a backup operation on a Windows Vista-based computer
  http://support.Microsoft.com/kb/950167

• Windows 7 backup - limit exceeded system image

  I use Windows 7 backup on an external disk of 1 TB of Seagate.

  Calendar is automatic (once / week) and system images, I chose "let Windows manage the backup history (maximum 232,86 GB) space.

  (If I change this choice to 'keep only the last image system', he said space is 153,64 GB)

  HOWEVER, when I look at the Windows backup disk space management, image system space is already at 277,58 GB, so way more supposed to Go 232,86 MAX.

  Backups of data (there are only 2) are 189,44 GB

  16/05/2015-10/10/2015 95.68

  16/10/2015 - 01/02/2016 93.76

  and there are 72 GB of other files, the reader is so much more than half full.

  I have 2 questions:

  WHY the system recommended in image limit is not be maintained? -I want more than just the last image, but I would like to be able to delete some precedents myself.

  Data backups - I used to see the new created on a fairly regular basis, now just of grows and grows. The only reason why I have 2 is because I had to do a restore system image in mid-October.

  These two problems mean that I can't manage the space myself by removing older data and system image backups.

  Help!

  Hello Andrea,

  Thank you for keeping us posted.

  Certainly, I understand your concern and will try my best to help you.

  I appreciate all your efforts really to try to solve this problem.

  To diagnose the issue in the new user account, I suggest you try to re-create the issue in the new user account and check if that helps.

  Create a user account

  http://Windows.Microsoft.com/en-us/Windows/create-user-account#create-user-account=Windows-7

  Security, privacy & accounts

  http://Windows.Microsoft.com/en-us/Windows/Security-Privacy-accounts-help#security-privacy-accounts-help=Windows-7&V0H=win8tab1&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1

  I hope this information is useful.

  Please let us know if you need more help, we will be happy to help you.

  Thank you.

• Did someone met flashing images/shapes when loading content before flash?

  Hello

  I had a question about a problem that I guess is flash related on Google Chrome.  I tried to get help on the forums of chrome but my messages seem to have ignored or not seen and it is quite frustrating.

  It's a question I've had for at least a month and a half or so Flash content, initially, I thought it was just the Youtube/Dailymotion videos, but it turns out that there's similar behavior on the ads that appear on the pages as well.

  The question is about a fraction of a second flash (sometimes a little longer) which seems to be a pixelated object, until the bar video is displayed and the video plays as usual.  It seems to happen on occasion, with at one point this happens quite often.  I noticed the problem has decreased somewhat, although I occasionally see the flash still occur.

  It seems to be a problem with Chrome, I was not able to reproduce this issue/event with other browsers at all, I can say that I solved the problem by disabling a plug-in of flash (when it was two more distinct) on an earlier version of chrome.  However in the recent updates of chrome, it seems that the problem appeared again.

  I apologize if this is the wrong place for this question but I wanted to ask these people here and adobe their opinion on this issue and that the guys they thing I can do to prevent it from happening.

  I have a number of screenshots showing the flashing image or article that I managed to catch via the printscreen.

  

  

  

  I have a few other screens that are similar and can show those that well if people want to see them, just did not clutter up my first post, would really appreciate if someone can explain why this happens? I would really appreciate it.

  Thank you

  This seems to be a bug in version PPAPI of Flash Player for Chrome.

  To work around the problem, you can switch to the more mature NPAPI version.  See the thread below for instructions.

  Here is the public bug for reference:

  https://BugBase.Adobe.com/index.cfm?event=bug&ID=3348704

• Flash Image Viewer

  I have created a page in the DW8 and have inserted a Flash viewer instance although despite the change settings in the Inspector of tags that controls should not be visible – they are and the pictures do not show when I preview the page in the browser (IE7). I created another page earlier in another site where it works perfectly. Can you make suggestions?
  
  Thank you
  
  Stevie

  StevieMitch wrote:
  > I have created a page in the DW8 and that you have inserted an instance of the Flash Image
  > Good viewer that despite changing the settings in the Inspector of tags to say that
  > controls should not be visible - they are and the pictures do not show when
  > I get a preview of the page in the browser (IE7). I created on another page
  > previously on another site where it works perfectly. Can we do anything
  > suggestions?

  If it worked on a single page and not on another, then he the difference would have to do with the settings that have been applied, or because of some other issue on the page in question. Therefore, you must post a link to your page and the State of specific faults will have to take to see the problem you are experiencing.

  FYI: this for is for users of Dreamweaver extensions, is add ons to Dreamweaver, not for features such as the Flash viewer. Many people visit forums general Dreamweaver including a better place for your question:
  http://www.Adobe.com/cfusion/webforums/Forum/categories.cfm?forumid=12&CATID=189&entercat= y

  FWIW: Flash Elements, which is the Flash viewer, are getting discouraged in the following (after CS3) version of Dreamweaver according to this page:
  http://www.Adobe.com/go/kb402489

  --
  Danilo Micen
  | Knowledge stretching every day: http://CommunityMX.com/
  | Adobe Community Expert

• as I am sensitive to flashing images can I turn off blinking animations

  Blink quickly affect images me and it worries me that some may cause seizures, I can turn off the flash animations? It would be useful for sensitive people.

  For example my email page email providers had Jackpot.com ads with flashing quickly images that are bordering on the subliminal, other advertisers make this type of ad, so they would not be allowed on TV because of the risk so he could give Firefox users if they could turn the animations flash with an on/off switch.

  This isn't for lack of Firefoxes somehow, I install Firefox on all my computers, because it surpasses everything else I've tried.

  Install Adblock Plus from here: https://addons.mozilla.org/en-US/firefox/addon/adblock-plus/

  Subscribe to the "Easylist" when you see the menu and then go to the list of subscriptions: http://adblockplus.org/en/subscriptions

  At the foot of the page in the "Miscellaneous" menu, click on the link to subscribe to areas 'Malware' which will filter the malicious sites as well.

  To become familiar with the application, go here: http://adblockplus.org/en/getting_started

• Re-install the Ultra Manager backup-16 G flash drive

  long story short.

  Had a problem with my new 16G flash and finished last week by having to redeem another.  Kept asking me to format the drive when I tried to access it, it was after I got 12 GB of data on it.

  So, got my new and immediately put in shape, why, cause, I didn't want the same problem.  Well, I deleted the backup out of there Manager.  Where can I download this nice piece of software?

  Thanks in advance guys

  Dennis

  Oxford, AL

  NM.

  Here ya go for those who have the same problem:

  http://KB.SanDisk.com/app/answers/detail/A_ID/5206/kW/SanDisk%20Back%20up/r_id/101834

• Backup error: the task image is damaged or has been tampered with, (0 x 80041321)

  Original title: can not save files.

  I tried to back up my files but, when I pressed "Save settings and start Backup", which ends up was: backup file could not save your automatic backup settings for the following reason: the task image is damaged or has been tampered with, (0 x 80041321). Please try again.

  I tried several times but it does not change... What should do? I'll have "nuts"...
                                                                     

  Hello

  I suggest you to follow the steps in this link and check if it helps:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-performance/error-code-0x80041321-while-performing-data-backup/c845af02-0121-4cc7-ba1b-a1f9268ee525

  It will be useful.

• What is the main difference between using using Windows 7 backup & using Acronis True Image backup?

  If I remember, Acronis backup can actually make a real clone (of everything, or the details of my choice) of my entire disk/Partition, and Windows 7 backup will be only some backup (Microsoft?) Programs, including the OS Windows 7, right?

  • The Windows backup tool will save user files. It will not support the system files (unless you choose them explicitly, which is not a good idea).
  • Windows Image tool will create an image of the system partition. It is a very basic tool that is sometimes capricious.
  • Acronis image backup option is similar to the Windows backup tool, but with more options.
  • The image of Acronis image option is a tool for creating image full maturity with a much better functionality and flexibility of the Windows image tool.
  • Acronis image costs money.

• How to run backup using UBS flash

  Using the UBS flash, what are the steps to perform a backup

  See this article, article "change automatic backup.

  http://www.brighthub.com/computing/Windows-platform/articles/71253.aspx

• Can we move that a backup of the Windows Image to a different drive location years still be able to use it to restore?

  I did a Windows 'backup system image"when first of all, I got my new computer and put it on a hard drive internal, designated as"D", which was intended to be used for data. I tried to do a restore, and although very "fussy" has been able to do.

  The image of the system take much space and if I had to do over again I would have put somewhere else.

  I have read that the image cannot be moved to another location or it will no longer be abel to to beused to restore from. Is this true?

  (1) can I move the image of the system upward (and parent folders he created) to another drive (preferably external) and still be able to restore from it if necessary?

  (2) can I move the image of the system upward (and parent folders he created) to another drive (preferably external) and move them back the same origin drve and still be able to restore from them if necessary.

  (3) the optimum would be a stand-alone backup on external media (such as the blu - ray, DVD, etc.) to restore from scratch, if necessary.

  I use Windows 7 64-bit.

  Thanks in advance.

  You can move your images wherever you want, but to restore from them, the WindowsImageBackup folder should be moved to the root of a drive, so you can move it to

  J:\WindowsImageBackup

  for example.  J: didn't need to be the drive that the image was made for the first time on.

  I found confusing indications that Windows might support images being elsewhere as the image during the restoration list would identify the correct date & time for the last image on the disc.  However, it would then only work with an image that I grow in X:\WindowsImageBackup as explained above.

  I managed my images using a subfolder of H:\ J:\ or O:\ called ImagesWin7, which itself has 20120205 1126 etc. subfolders.  I put some descriptive info I want in the relevant subfolder so I can see key information easily if I want to restore.  Then, I create the image & move this folder WindowsImageBackup, so I find myself with O:\ImagesWin7\20120205 1126\WindowsImageBackup and I also have a 1126\Explanation.txt of O:\ImagesWin7\20120205 of the text file that contains my notes on what I was just doing or was about to do on the system.

  What is resolved issues for you?  If this isn't the case, please let me know your remaining questions.

  It IS a big help (since this is exactly what I was trying to accomplish).

  Education path for my pictures of system includes a machine name

  (i.e. the 170453\ J:\WindowsImageBackup\MachineName\Backup 2010-12-03)

  Can I have added the word "Backup" myself as a descriptor that I don't remember.

  I also have added the subfolder/directory "MachineName" myself. I don't remember.

  Will have to start from scratch and create another backup of WindowsImage (without any writing help) and see what is the path for this image. Then attempt to restore etc and if it works then try again restore one of my old backups.

  It may be I made the backup unusable images (even if they are visible for the restore program) by changing the path and / / or folder names. Although it seems that you have also done this with your "imagesWin" directory You replace the image backup in the root directory, and then restore it?

  The only reason for all this must be able to reach and (if necessary access and restore from) one of the first images saves when the machine was new, blank before installing the software ay etc. Easier to make a bare metal restore to install Win7 from scratch, load the drivers and configure etc.

  As mentioned above, I now use ShadowProtect Desktop 4 for backups image system (including incremental images) and have found that it is great (and images can be moved to any directoyr and bootable recovery environment will restore bare metal from any location, USB, DVD, same network etc.

  Better documentation of Windows would have certainly been useful,

  Thanksfor your ideas

• Never backed up system before. Want to backup on CD. When the backup system, iin System Image, it does not 'local '. At only player to select. How can I save on a cd?

  Trying to backup cd my system does not give the option of backup on 'local' as shown in the video.  What it offers is DVD player.

  I never saved before.

  The DVD player is the right to choose.  You can use several DVDs CDs simply aren't enough great.  It would be more simple create a system image on an external HARD drive.

• Cisco UCS C240 M3 BIOS Flash Image corrupt

  I have a Cisco UCS C240 M3 server than the bios flash corrupted image.

  I followed the steps to recover the bios but below the image, this machine couldn't find a recovery.cap file...

  I just plugged my USB key and the file recovery.cap in the folder root of the USB.

  also the FAT16 formatted USB and FAT32, but it failed.

  I plugged my USB thumb key USB which is at the center of the server.

  Help, please...

  also, the keyboard and the mouse doesn't work. they couldn't recognize too.

  bios_currup.jpg

  

  Have you had the recovery.cap ISO HUU for the ISO c240 (see screenshot)?

  Make sure the USB is formatted, and only the image of recovery.cap is inside.

• WLC Backup Version vs Recovery Image Version field

  Anyone know the difference between the Version of the backup and the version of the Image field of the recovery of the IOS on a WLC? I have recently updated my WLC 5508 to the new code and the version of backup is infact the previous active version I was running but the field recovery Image version is now the previous backup version. I was wondering what the differences were. Is the FRIV a backup for the backup? Thank you.

  Chris.

  The field recovery Image, it's what you get when you interrupt the boot process.  The backup image, as you noted, is the last image you upgraded.

  So if you are running 6.0.196.0 and upgrade to 7.2.130.0, 6.0.196.0 will be the image of "backup."  If you hit the CLI and boot config backup.  During the next restart the WLC will mount on 6.0.19.60(though il est toujours considéré comme sauvegarde et 7.2 sera «primaire»)

  Steve