Backup script advice please
It is a question of both parties
Part 1
We tested the restoration of the smartcopy on one of our virtual machine, this virtual machine has a single 60 GB vmdk disk, the restoration of this virtual machine took about 45 minutes to complete, is 45 minutes of time consumption normal duration for the restoration of a single 60 GB vm? I thought that it would take 5-10 minutes to recover.
Part 2
In a scenario where I need an immediate recovery of entire virtual machine (as oppose to wait 45 minutes for the restore to finish) I have everything just bring the snapshot online and make it writable and let users access this virtual machine while troubleshoot us the original virtual machine, obviously that would take lass than 5 minutes to bring the snapshot online , but what are the implications of this method.
I think you will find VSM 3.5 faster than the ASM/VE.
Re: snapshot. As long as you realize how it works, in the short term, it is fine. Another trick I use is typically trying to recover a file, not the whole VMDK. Bring the snapshot online, add this VMDK to a different VM. One that you can stop eventually. By adding the VMDK from the snapshot, you can see the files, then simply restore the files on the network. Then stop the virtual machine, you can remove the VMDK and the instant back offlne. ESX allows you to add a direct VMDK, but not delete one. It is a very fast operation compared with a copy of 60 GB.
Tags: Dell Tech
Similar Questions
-
With wise folder backup script date
Hi all
I want to take RMAN backup with date wise new folder creation scripts. e.g. today, it's 31 Oct so when I run the backup script it should create a folder name Oct. 31 and then take backup. My goal of this nice script, is that I will move daily tape backup. kindly advice.
Thank you
KrishnaHello
I would just give you the highlights as I would:
(1) create a shell script which create directory unix with date (e.g., mkdir/somepathhere / 'date' +%Y.%m.%d__%H%M%S ")
(2) generate the script in which backup command in "xyz" will have xyz format, replaced by the path of complete directory of point 1.Paul
-
Update Verizon iPhone 5 new IOS 10 problem: I can't receive/send calls. The store Verizon says it's phones a popular causing update Apple crash all day. Any input or advice, please?
Don't you say no service at the top?
-
Backup script no longer works in macOS Sierra
This line in a backup script used to synchronize the folder my documents with my Synology NAS:
rsync - avh - delete - progress ~/Library/"Mobile Documents" / com ~ apple ~ CloudDocs/Documents /Volumes
A ran in the Sierra, he deleted the contents of the folder/Volumes/Documents on the NAS. Nothing is copied.
The ~/Library/"Mobile Documents path" / com ~ apple ~ CloudDocs/Documents is valid in the terminal. I don't see what has changed.
Modify the script to this:
rsync - avh - delete - progress ~/Documents /Volumes
A did the trick. Do not know why. The old path seems valid in the terminal.
-
Indicator light charging cable does not go on when connected to power what a lack of cable or battery problem? Advice please.
Troubleshooting help here > Apple Portables: Troubleshooting MagSafe adapters - Apple Support
-
Updated the MacBook Pro to ElCapita to Apple's Service. Now cannot restore last July 7 from Time Machine backup. Help, please.
Visit Time Machine FAQ of Pondini helps with Time Machine. It is a vast site with almost everything that you need for using Time Machine. You will not find a better resource for Time Machine in one place. Due to the disappearance of James Pondini is the site is no longer updated. Therefore, some information may be somewhat outdated.
-
I forgot my sequrity answer and my backup email it please help
I forgot my sequrity answer and my backup email it please help
You will need to contact support in the country where you are (and therefore the country on your account) to get the reset questions: Contact Apple for the Apple ID account security support
If your country is not on this page, then try this form to contact Support: https://www.apple.com/emea/support/itunes/contact.html
When they have been reset, you can then consult and/or modify your backup for possible future use e-mail address: on your Apple ID - Apple Support email addresses
-
Hi, I have a problem with my pitch bend wheel on my pc - 300 midi keyboard Roland. The Modulation part works but when I try to pitch bend a note using the same logic of wheel just plays a continuous note. Can someone give me some advice please? Thank you
It's a delicate issue... like some patches cannot stipulate pitchbend...
But to quickly test your pitchbend wheel actually works properly...
Download the free lunch monitor...
Run and see if it sees pitchbend data sent by your keyboard... and therefore by logic.
-
Care of my MacPro is lower from a previous post. It does not start, but keep train. I get the rope to music if I stop and start again. Advice please. Thank you very much. Allan
Mac Pro (early 2008) (data sheet)
Mac Pro - model: MacPro3, 1
2 3 GHz Quad - Core Intel Xeon processor: 8 strands
8 GB of RAM expandable
DIMM Riser B/DIMM 1
1 GB DDR2 FB - DIMM 800 MHz ok
DIMM Riser B/DIMM 2
1 GB DDR2 FB - DIMM 800 MHz ok
Riser DIMM A/DIMM 1
2 GB DDR2 FB - DIMM 800 MHz ok
Riser DIMM A/DIMM 2
2 GB DDR2 FB - DIMM 800 MHz ok
DIMM B/DIMM Riser 3
1 GB DDR2 FB - DIMM 800 MHz ok
DIMM B/DIMM Riser 4
1 GB DDR2 FB - DIMM 800 MHz ok
Riser A/DIMM DIMMS 3
Vacuum
Riser DIMM A/DIMM 4
Vacuum
Bluetooth: Old - transfer/Airdrop2 not supported
Wireless: en2: 802.11 a/b/g/n
NVIDIA GeForce 8800 GT - VRAM: 512 MB
HH281 1920 x 1200 @ 60 Hz
DELL3007WFPHC 1600 x 2560
OS X 10.10.2 (14C109) - since the start time: 20:27:26
ST3320820AS_P disk0: (320,07 GB)
EFI (disk0s1)
: 210 MB Disc 1 - system (disk0s2) /: 319,21 GB (17,69 GB free)
HD (disk0s3)
[recovery] recovery: 650 MB WDC WD5000AAKS-41YGA0 disk2: (500,11 GB)
EFI (disk2s1)
: 210 MB System install disks 1 and 2 (disk2s2) / Volumes/installation discs for systems 1 & 2: 16.11 GB (4.40 GB free)
Disc 2 (disk2s3) / Volumes/disk 2: 483,52 (291,34 free go-go)
Hitachi HDS721010DLE630 disk1: (1 TB)
EFI (disk1s1)
: 210 MB 3-1 TB (disk1s2) Dist/Volumes/Dist 3 TB: 999.86 1 GB (328,00 GB free)
Prolific Technology Inc. IEEE-1284 controller.
Hewlett-Packard HP LaserJet P2055dn
Hub keyboard Apple, Inc.
Logitech USB receiver
Apple, Inc. Apple Keyboard
Apple Inc. Bluetooth USB host controller.
EPSON USB printer
Mac App Store and identified developers
You still have OSX 10.5.8?
-Try to reset memory NVRAM/PRAM and SMC
MacIntel: Reset of the controller (SMC) system management
Subject of memory NVRAM and PRAM
-Try to start safe mode
OS x: what is Safe Boot, Safe Mode?
-Start to recovery and repair the startup disk if Lion or higher
OS X: on OS X Recovery - Apple Support
Otherwise start from the installation DVD and keep the boot disk
-If it is repairable reinstall the OSX
How to reinstall OS X on your Mac - Apple Support
Run the Apple hardware test. You will need one of the original installation discs
Using Apple Hardware Test - Apple Support
You may have a bad graphics card. The NVIDIA GeForce 8800 GT - VRAM: 512 MB are prone to failure
-
Weatherbug desktop for years, I had one day that the icon has been
went, I might not bring up weatherbug.
I went to your web site to re-download, but I received this
error(2738) WeatherBug Setup requires VB Script. Please allow VB
writing scripts.
My computer is Windows Vista, I use Explorer 9,Hi John,.
This error message indicates that the VBScript engine is not currently registered on the machine where the installation/uninstallation.
Try the following steps:
The VBScript engine may be quickly entered as follows:
a. click Start, type cmd, click with the right button on cmd and select run as administrator
b. If you are using the 32-bit version of type Windows:
CD %windir%\system32 . in the command prompt and press ENTER.
c. If you are using the 64 bit version of Windows:
%windir%\syswow64 CD and press ENTER.
regsvr32 vbscript.dll . in the command prompt and press ENTER.
regsvr32 jscript.dll . in the command prompt and press ENTER.
For more information, see the following link:
Windows errors install 2738 and 2739 with Script Custom Actions
You can also check the following thread that addresses a similar question on MSDN:
http://social.msdn.Microsoft.com/forums/en/WPF/thread/970d27ea-2204-424B-a76c-52cab2601a74
-
I have photo stylus epson rx 520 when I try and print from the internet he prints only on the left side, how do I set back to A4 portrait advice please. I have windows 8.1
Petersrex
You the best solution is to contact Epson. We don't support Microsoft products on this site and they know their best products.
-
MAXL - Backup Script Essbase for lack of encrypted password
I went through the steps of...
1. creation of public/private keys
2. password encryption
3. pass these components in the backup script Essbase
From the kick-off of the EssbaseBackup.bat, it fails to connect with the username password / encrypted.
If I remove the encrypted password and instead, encode the password, it connects fine and generates the backup file Essbase.
Anyone of you people seen this behavior before? All good pointers trying to solve this problem?
Appreciate any feedback.
It would have been useful to see your script too, but looks like you are missing $key in your statement at the opening session.
It should be something like:
login administrator $key 23958236592475923472398969868968756 ON HYPERION;
I'm assuming you use you're maxl script with the parameter-d and the provision of key private after him.
-
All comments on this full backup script?
Oracle 11.2.0.4 on Oracle Linux 6.4
We want to replace the illegible full hot backup script provided by netbackup guys. So, I created a much more readable script. Below is the crux of the complete hot rman backup script on tape.
I did a test backup. The backup has worked even though I did not restore, recover from this backup
1. are there improvements you might think? However trivial, you can comment on
2. currently, I only LIST BACKUP; and the LIST SUMMARY of BACKUP; After the backup. Should I include any other LIST control that would facilitate the identification of the elements of backup during the restoration?
Target of $ORACLE_HOME/bin/rman = / catalog rman/mypass@catalog_db < < EOF
run
{
allocate channel t1 type 'sbt_tape ';
allocate channel t2 type 'sbt_tape ';
allocate channel t3 type 'sbt_tape ';
allocate channel t4 type 'sbt_tape ';
Send "NB_ORA_POLICY = MANH_PROD_FULL, NB_ORA_SERV = hewmaster198, NB_ORA_SCHED = MANH-PROD-Backup";
LEVEL INCREMENTAL backup = 0 format='${ORACLE_SID}_full_%U_%T.rbk database ' tag = ' ${ORACLE_SID} _hot_bkp ";
ARCHIVELOG backup all the format = "${ORACLE_SID} % s_ %%t p_ _al_ ' tag = ' ${ORACLE_SID} _arch_bkp";
Save the spfile tag =' ${ORACLE_SID} _spfile_bkp 'format='${ORACLE_SID}_spfile_%U_%T.rbk ';
backup current controlfile tag =' ${ORACLE_SID} _ctlfile_bkp 'format='${ORACLE_SID}_ctl_file_%U_%T.cf ';
cross-checking of backup;
delete noprompt force backup expired;
output channel t1;
output channel t2;
output channel t3;
output channel t4;
}
backup from the list;
backup of the consolidated list;
"exit";
EXPRESSIONS OF FOLKLORE
1048827 wrote:
Oracle 11.2.0.4 on Oracle Linux 6.4
We want to replace the illegible full hot backup script provided by netbackup guys. So, I created a much more readable script. Below is the crux of the complete hot rman backup script on tape.
I did a test backup. The backup has worked even though I did not restore, recover from this backup
1. are there improvements you might think? However trivial, you can comment on
2. currently, I only LIST BACKUP; and the LIST SUMMARY of BACKUP; After the backup. Should I include any other LIST control that would facilitate the identification of the elements of backup during the restoration?
Target of $ORACLE_HOME/bin/rman = / catalog rman/mypass@catalog_db<>
run
{
allocate channel t1 type 'sbt_tape ';
allocate channel t2 type 'sbt_tape ';
allocate channel t3 type 'sbt_tape ';
allocate channel t4 type 'sbt_tape ';
Send "NB_ORA_POLICY = MANH_PROD_FULL, NB_ORA_SERV = hewmaster198, NB_ORA_SCHED = MANH-PROD-Backup";
LEVEL INCREMENTAL backup = 0 format='${ORACLE_SID}_full_%U_%T.rbk database ' tag = ' ${ORACLE_SID} _hot_bkp ";
ARCHIVELOG backup all the format = "${ORACLE_SID} % s_ %%t p_ _al_ ' tag = ' ${ORACLE_SID} _arch_bkp";
Save the spfile tag =' ${ORACLE_SID} _spfile_bkp 'format='${ORACLE_SID}_spfile_%U_%T.rbk ';
backup current controlfile tag =' ${ORACLE_SID} _ctlfile_bkp 'format='${ORACLE_SID}_ctl_file_%U_%T.cf ';
cross-checking of backup;
delete noprompt force backup expired;
output channel t1;
output channel t2;
output channel t3;
output channel t4;
}
backup from the list;
backup of the consolidated list;
"exit";
EXPRESSIONS OF FOLKLORE
If you set UP CONTROLFILE AUTOBACKUP ON, then you don't need separate steps to back up the control and the spfile. In fact, I do not think that you don't even need to do. Any time that the backup is a backup of the table system (datafile #1) space, it will also create a backupset to include the control file and the spfile. Try it yourself.
Everything in your summary of the list 'backup' is already included in your backup of 'list '.
I would add 'delete all entries "for the backup of the archivelogs. '. If you do not, then eventually your archivelog destination fills. (Well, if you check in CRF, then it will delete archives when there need more space - if it can and do not compromise your position of recovery.)
In addition, to overlap/remove expiration on safeguards, I would do the same for the archivelogs.
-
Hi, I need to activate a CS4 license on a computer of mine that was stolen, advice please?
Hey Grant,
Licence can only be manually disabled, there is no way to disable if it you can not access it. However, if you want to activate on another machine, we would be happy to help you.
Waiting for your response.
-
I crashes when I try to open a file or make a new one. Advice please?
I use a laptop and windows. I starts OK, but I can't actually create anything before it turns off. Advice please?
Hi Tm,
Can you please check if there are any printers installed/connected on your system? If Yes, please un-install/remove the and check again?
Thank you best regards &,.
Rambour
Maybe you are looking for
-
Satellite P50t-B-104:-WiFi doesen't work well
My new Satellite P50T-B-104 has an Intel dual-band wireless-3160 AC adapter.Free Wi - Fi and Bluetooth is supported by this map.Bluetooth works well. On the side of the Wi - Fi connection, there is no network connection, good list in our neighborhood
-
My Media Player 11 says I need a "codec".
I have Vista, and my Media Player 11 won't play CD because he says that I don't have the required "codec" installed. However, I can't find one who will install. I have already installed a patch/file that is supposed to fix the file installation probl
-
my screen keeps going very pale color after a few minutes of use
I turn on my computer and the screen is bright as usual with usual clolour, and then a few minutes later everything goes very pale color. Not sure why this is happening. Someone would be able to help me please.
-
Cannot download pictures from canon SD850 digital camera to the computer it copies all files
How can I download just the picture of this camera I want for my PC, without having to download all the photos from the camera. Must be a simple step, but I can't find it. I find myself with plenty of copies of each photo, because it downloads all th
-
BlackBerry smartphones help as soon as possible!
I accidentally deleted my blackberry Messenger. I'm not able to download even more office software as well as the app store... What am I, I guess what to do now? Please help!