Bad picture quality

Similar Questions

• Bad picture quality in first 11 elements

  I have a project containing still and video images.  When I look at the content in the Organizer, they are crisp and clear.  When I put them into the project in elements of Prime Minister, the quality is poor.  I made the project before viewing.

  Paul

  Thanks for the reply with very useful information for troubleshooting.

  First elements 11, workspace Expert

  Got to File Menu/new/project and change the settings

  In change settings, change the project preset NTSC, DSLR, 1080 p, DSLR 1080 p 24 and close there.

  In the dialog box new project opens, name the project, and make sure you have a check mark in front of the "Force selected setting on this project" and nearby.

  In the Expert workspace, import your video 1920 x 1080 p 24 source.

  The photos you want to use are grossly oversized for the preset and 4:3 that would take you in a 16:9 project. How many of these 4000 x 3000, 4:3 pictures do you plan to integrate the project? The picture aspect ratio is probably more a problem than large pictures that may compromise your system resources.

  Harvest to resize the photos up to 1920 x 1080 16:9.

  a. you can do it in the Photoshop elements editor crop tool

  b. you may use the free IrfanVIew program for batch processing approach

  If pan and zoom effects must be applied to photos, then consider resizing the harvest at 1.2 x 1. 5 x or 2 x 1920 x 1080 in keeping the proportions of the 16:9 image. Import with the preference default scale to the size of the picture off the plateau to apply it and zoom effect on the 1920 x 1080 followed by scaling the picture just 16:9 of space in the editing area monitor. Or right-click in the picture from the workspace Pan and Zoom and activate the scale to the size of the image to leave the project to do this scaling of the space of 1920 x 1080.

  Return the timeline to get the best possible overview.

  What is your planned export?

  If the file is saved on the hard disk of the computer, thinking

  Publish + share

  Computer

  AVCHD

  with Presets = MP4 H.264, 1920 x 1080 p 24

  Let us begin here and decide then what was then based on the results in your response.

  Thank you.

  RTA

• Bad picture quality in v5.5

  Below is a copy of a slide and highlighted in red is an image I copied (using Snagit), saved as a .png and imported by Captivate v.5.5 on the slide.

  As you can see that the quality of the text in "edit" mode is very very bad - yet this crystalline watched same image in v4.

  The text appears correctly when you run the project, but it is no help during the editing phase.

  Anyone has any ideas please?

  Try another (I never type, just copy the link):

  What I have...

  Lilybiri

• Bad picture quality-> Fashion Design & content (CP8) published

  If I am preparing a high quality image, perfect photo, strong, size we will say 500 x 500 px in Photoshop (maximum JPG quality setting), then dump in Captivate, I find that Captivate significantly degrades the quality of the image.  It changes the sharpness of the image and destroyed the exposure as the color saturation and tint settings.  Even if I publish to an LMS with 24-bit, no compression, it still seems degraded.

  Is it possible to improve the quality of the image?

  File file, import, Photoshop.  You will be able to choose which layers have to be imported (each layer will be converted into a PNG image), or import an image of smooth. I use this feature a lot, because it also maintains several images/layers in the same PS file and helps the management of Images in the library.

• Bad picture quality in Webhelp

  Hello

  I use FM11-RH10 under the TCS4.

  I have the images referenced in FrameMaker book. These images are clear and are of good quality (no graphics text or pixelated blurred).

  Now, when I import the book of FM in HR, the clarity of the image is slightly affected (the image becomes blurry), but are still of acceptable quality. However, when I publish it as Webhelp, the text is hard to read.

  I browsed these forurms and found that the selection / deselection of the Adobe Distiller option in the settings gives best output file. I tried but it did not help.

  No other work around?

  Thanks in advance.

  Anthony

  usually, there is little HTML code on the first frame to use it only as a weak kind of ground space, because by clicking on this link to the full-size image. Inside of the source of the page, you may be able to change the code associated with the placeholder image to make it bigger and better with ground. Do you know how to view the source code and modify it?

• Toshiba Camileo Pro HD - bad image quality camcorder

  I recently bought a toshiba camileo pro hd camcorder due to its size and 720 hd quality.

  I connected through my wlt toshiba tv via the component cable, but the picture quality is bad. It seems very grainy. I thought it was the connection, but these have been checked and were perfect.

  IM pretty impressed if this is how it will run even if it was valuable.

  I'm doing something wrong?

  Cheers for all the advice

  Hello

  If you image quality is bad check details in the menu setting by choosing the right standard of TV (try PAL and NTSC as an alternative).

  And if the LCD screen image is unclear when shooting, try to turn the ring to 'Focus' on the circumference of the lens on the proper position: (general/Figure/Macro)

  Good bye

• SVE14123CNB with camera of 64-bit windows 8 is to give a very bad image quality.

  My sony vaio SVE14123CNB with camera of 64-bit windows 8 is to give a very bad image quality.

  I have compained several times to sony, but they said that there is problem with windows 8 and this laptop model.

  I think that this response is not the solution to the problem, as it is my work that still hinder once. This laptop has with exmor HD webcam, so we expect the quality of the picture from the webcam to be strong, but it is dark, blurry, vary hard to identify someone even. It is even lower than some old VGA cam.

  Please provide a rigid solution.

  Hello krishna_18,

  The most common cause of this problem is a poorly lit room.  Please try to use the camera in well-lit areas.  Since there is no light or flash on the camera device, it is not able to work as well in dark situations.

  As to the answer before someone gave you "problem with Windows 8";  What they probably meant is that this laptop does not come with any software the camera included.  Therefore, the "Camera" app Windows 8 is what is natively provided and used.  This application is very limited in options and resolution.  Using an alternative app camera of your choice can also improve options, parameters, and results.

• Satellite L755D - Webcam: very bad image quality?

  Hello @all,

  I have a SAT. 755 (OS: win7 64 bit). The webcam returns a very bad image quality and I noticed that the driver is from the year 2006 (Microsoft, Version 6.1.760.17514).

  I installied the last 'pilot' vom site of Toshiba (version 2.0.0.19), which actually just updated the CAM software.

  It is a fact, that this webcam is of very poor quality, or could someone please help me improve the photos, which are not only in poor Skype, but also when I just test the cam.

  Greetings from the Austria
  erkg1959

  Hello

  Please check the film in front of the lens is detached.
  I think that many models is delivered with a protective film in front of the goal and it is not too easy to do.

  See you soon!

  Tom

• IdeaPad Yoga 13 - HDMI of bad image quality on the TV 1080 p screen?

  Hi people, I have recently connected my Yoga via HDMI to my TV Samsung 40 ". Unfortunately, the image quality does not as good as my old T61 via VGA hooked up to my TV. Image via HDMI on my TV has some sort of "shadows" around the edges at all. I use a HDMI Basics Amazon cable that is capable of 3D and Ethernet over HDMI - I think this cable should be ok.

  Did it someone else faced with problems with the picture quality of the Yoga on a TV via HDMI before?

  Just for completeness: it was my TV sharpness settings. I had to turn off completely disable the artifacts.

• Received a stop: C000007b (bad picture) at the start of windows XP load

  I can't get my netbook at startup.  Once the windows logo starts and loads the screen goes black, then the message on blue screen appears.  STOP: C000007b (bad picture)? \C:\windows\system32\csrv.dll is not a valid image.    I have made several attempts with f2, f8, f11 and f12.

  Hi Ed,

  Try to press F8 when when the FN key is on and once when it is off to see if it is causing the problem.

• Standyby.exe - bad picture message arising and several programs are now no longer works

  Original title: Standyby.exe - bad Image message 19/08/12

  Hello world

  I get a Standyby.exe - bad picture message arise. Several programs are now no longer works as iTines, Photshop and MS Word. In the message window begins C:\Windows\assembly\NativeImages_v2.0.50727... I have run several anti virus and malware programs normally and in safe mode, try the system restore, run registry cleaner programs and even took the computer to my local computer guy. All of this is without effect. Given the nature of the message and the type of programs not responding, it seems that I have a missing or corrupt file regarding execution of the images, but I don't know. Can anyone help. I'm pretty close to the stage where I could reinstall Windows, but I only want to do this as a last resort, given the amount of programming that I have to re - install. Oh - the system I'm using is Windows7 home premium, 32-Bit, RAM decent, proccessor and HD etc.

  Any help... Thanks Jim

  Hello

  1 did you changes to the computer before the show?

  2. when exactly you receive this error message?

  3 have you experienced the issue when you opened the 'Safe Mode'?

  I suggest you follow these methods and check.

  Method 1:

  Step 1: Try to restart your computer in safe mode and check if you receive the error message.

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  If it works fine in safe mode, perform the clean boot and check.

  Step 2: Perform the clean boot using the suggestions mentioned in the link mentioned below.

  http://support.Microsoft.com/kb/929135

  NOTE: After you check the clean boot feature configure Windows to use a Normal startup using step 7 proposed in the above mentioned link.

   

  Method 2: Run the tool (SFC.exe) System File Checker and verify the.

  Measures of the follow this link: http://support.Microsoft.com/kb/929833

  If the problem persists, I suggest you to bring observant event logs.

  Check Event Viewer for events, at the time, the problem occurs:

  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  I hope this helps!

• The Lightroom export file size: why it's so small? How can I maximize the picture quality?

  My image file size is much smaller after editing and export through Lightroom. It is impossible to maintain the size of the original file in order to preserve image quality? This small file size will have a negative impact on the prints? Any help is appreciated!

  The file size is not an indicator of picture quality! You are looking at the wrong measure.

  File size is determined by the number of pixels you have, the quality slider in the dialog box export and of a dozen other things, most of which you cannot control.

  Want to watch the number of pixels (width and height) and not the size of the file.

  It is impossible to maintain the size of the original file in order to preserve image quality?

  Not only is impossible, that it is also meaningless (see above)

  This small file size will have a negative impact on the prints?

  Instead look at the size of the file, you must look at the number of pixels of the exported photo (width and height), and this will determine if you get a decent impression. The usual standard is that you need 300 pixels per inch.

• HP C410a Photosmart Premium: bad printing quality on the picture

  Printer HP Photosmart Premium C410a, just replaced all THE cartridges (genuine HP) - he always tells me cyan and magenta are weak, but the test page printed fine and I cleaned the print heads. When I print a picture (of the program Apple Photos) the ink begins to blurr and run. It is a new problem, all worked well.

  Hello and welcome to the community of HP @BevA1,

  I understand that you encounter some problems print quality when you print pictures of your HP Photosmart Premium C410a. I will do my best to help.

  Below, I've posted a link to a document that offers solutions of troubleshooting on this issue. Please try all the steps in order and get back to me with the results.

  Problems with print quality setting for the HP Photosmart Premium Fax all-in-One Printer Series (C410a C410b, C410c, C410d, C410e)

  If this help will testify of my answer by pressing the 'thumbs up' below, or click on the button "Accept as Solution" if I helped you reach a solution.

  I hope this helps and have a nice day.

• picture quality bad in previews

  I'm running the CP5 and have a number of slides that have static photographic images in them which are .png files. They have feathers on the edges and look very well in Captivate. However, when I look at in preview mode or in the browser, the images are very distorted (see screenshot). Any ideas what the parameters might be the cause?

  Thank you very much

  Whitney

  

  Hello

  Well Frapdoodle!

  Change something if change you the settings by clicking Edit > Preferences > project > size SWF and quality?

  

  See you soon... Rick

  Useful and practical links Begin to learn Captivate 5 times now! $29.95 Captivate wish form/Bug report form Certified Adobe Captivate training SorcererStone blog Captivate eBooks

• Problems with the picture quality when viewing under 100%. First post on the forum.

  Hello everyone. I'm sorry, we have the GET acquainted with this way, but I'm having some problems and this is one of my recent options to get the help.   Let me explain the problem.    Consultation of a file of less than 100% zoom, everything seems jagged as anti aliasing is missing.  Once I'm at 100% zoom, everything seems as it should. The saved file (for example jpeg format) is correct. I can zoom out and seems to be always faithful to the image. The problem is related to photoshop. I installed my latest GPU drivers twice just to be sure, and it was not that.   This problem started last night and I'm not sure how to solve.  If I work on images low resolution, it is not a problem as bad because I will be working on 100% zoom, but I work on images high resolution / paintings. Somewhere around 8000 x 5000 pixels so, work 100% is not that feasible. I have attached an image that illustrates this problem. The right one is zoomed in by the version and the left is the zoom in version.  Yes, the noise is touched by it, evil, but this started last night. until then, everything seemed fine even with the noise or the sharpness of the world output. I can't imagine what I could have done to trigger it.

  That said, I'm at the mercy of more sophisticated here people. I hope I have posted this question in the right section. It's my first post here so I'm sorry if I missed something.   Looking forward to your answers.

  This is a simplistic view, I feel may help you to understand the reality.

  The only time that you look at your image pixels in Photoshop is when you have zoomed in to 100%, it has your look at the pixels of the image in Photoshop for your image at the resolution of your display.

  At any zoom level, looking for an image on a scale that has more or less of pixels that your real picture that too, these are displayed in your display resolution.

  Scaling done by Photoshop is made to display your image is made for good performance, not the best image quality fast interpolation.   That's why at certain levels of zoom image quality seems poorer than at other levels of zoom.

  High resolution screen now have add a new problem.   User interfaces have been designed for screens with resolutions around 100 PPI elements like text, icon and other things like checkboxes, buttons etc. were created size so it would be usable it are more or less fixed 100 dpi.   While Photoshop is designed to scale to your images in order to work well on it is has not been designed with a scalable user interface.  Photoshop can't change its UI regardless of its display high resolution will display image for you.  Display Image in Photoshop has the same resolution as the rest of the User Interface of Photoshop.  Just as there is only one resolution in all layers in a document. CC 2014 2xUI changes.  PS IU is proportional to the image of the area is to the actual resolution of the poster of resolution 1/2.

  Photoshop CC 2014 2 x UI balance all Photoshop User Interface, including the image shown at 200% which is 1/2 the resolution of your screen you cut effectively display pixel count to 1/4 of the number of actual pixels.   Your new running on a low resolution screen.     If your screen has a native resolution 200 PPI you run it at 100 ppi if your display has a 300 PPI resolution you run at 150ppi.    Which goes against the reason for high resolution.  Who would you be able to edit your images to a print resolution.  Adobe cc2x UI will scale the user interface, but not the window image soa inage is 216ppi on the Surface Pro 3 user interface is great and dpoes do not match. screen

  To be able to edit your images to a print resolution you need to display the a a print resolution and you need and demand her can scale its image and its independent user interface display.

  Currently there is no OS interface to have several areas of resolutions on a screen and applications such as Photoshop does not scale UI and Image independently.  OS and Photoshop fits what is displayed.  Executable of Adobe Photoshop is coded in a way that it say Microsoft Windows OS it will load display scaling so that he can use the native resolution of your poster.  Currently only Photoshop CC 2014 offer you with the possibility to run you view at half the resolution.

  Windows fits view you lots of resolution and as several presets.  as 100%, 125%, 150% and 200% half of resolution Adobe.    You can make a Windows registry and add an external manifest Photoshop file of the Microsoft Windows tell to handle display scale.  I have a machine to windows Microsoft Surface Pro 3 Mr. its LCD screen has a resolution of 216PPI.  Windows 8.1 had 4 preset for the scale of its LCD screen.

  Surface Pro 3 screen LCD IPS 12 "display the 9.984603532054124 3:2 aspect ratio" Wide, 6.656402354702749 "high 216.3330765278394 PPI

  Scaling of display predefined Microsoft

  100% 216 2160 x 1440 DPI

  125% 173 1728 x 1152 PPI

  150% 1440 x 960 144 PPI SP3 to the position

  200% 1080 x 720 PPI, 108

  User most these days above 1024 x 768 or better poster and Web pages are often created for pages in 800 x 600 pixels. In order to give a better grip on the resolution and scaling that I change a 800 x 600 document with px grid 25 x 25 on my Surface pro 3

  scale 4 Windows presets and captured using the 2160 x 1140 to bracts screens only to the 100% preset the image window has a 216ppi also note x 2 @ Photoshop UI UI doe does not not on-screen

  

  Adobe Photoshop CC 2014 2xUI scales the user interface for a display resolution 1/2 but is not suited to the actual screen resolution Image area uses. Information system support Photoshop displays the screen i 1/2 resilution 1080 x 720 but scalet imase to the actual resolution 2160 x 1440. However, the image window is the 216ppi the 108ppi of the UI via the scaling