bad reports (activity report no activity reported)

Similar Questions

• Ethernet/IP: ControlLogix bad reports class with Demo.vi

  Demo downloaded from...

  http://forums.NI.com/NI/board/message?board.ID=nilabs&message.ID=279#M279

  Which is pretty much exactly what I had tried on my cRIO (got the 'Type of Segment invalid' on the cRIO). So I've punted and ran the demo on my PC.

  Thus configured ControlLogix 1756-L55 (Firmware V16.03) by the demo...

  

  Yet as you can see Clx class bad reports. The demo affects indeed Instances of Assembly 100 and 101 via constants. There is nothing to configure. What Miss me?

  More information:

  1756 - ENBT is Rev 4.3.2 @ 192.168.1.2

  cRIO: 192.168.1.1

  PC:192.168.1.199

  Industrial communications FOR EtherNet/IP: V1.2.0 (MAX shows it installed on target cRIO)

  For future stabs in the dark...

  PC-wise:

  For some reason any. Remove the generic Ethernet Module, add to Controllogix project and re - download got to work.

  cRIO wise:

  My original config had a real (SGL), a FORCE (I32), and a (U8) SINT grouped in a cluster and then flattened in a 9 byte array. It was produced for ControlLogix on instance 100. A symmetrical body 101 has been consumed. When executed on the cRIO - the ControlLogix has pointed out an electronic inlay - incompatible error code produced. Not really useful (thank you Rockwell).

  So I disabled popup everywhere wherever I could - with no improvement.

  On a whim, I remove the SINT (U8) of the cluster, this changed the array of bytes length 8 bytes. I adjusted the constants of size in BT and deployed. I adjusted the side ControlLogix accordingly and downloaded. He started to work without problem?

  Go figure. Someone at OR can look at this because I can't imagine a reason why you need to limit a config to the sending of an even number of bytes.

• MPF M127fn: How to disable fax on each ring bad report

  Hello

  Can you please explain to me how to disable printing fax activity on each ring of error log?

  Problem is that, every time when someone want to talk it is accidentally fax calls, and it prints then fax fax activity log is not received. This happens in many as much as someone called fax per day.

  Hi @markometabo,

  Welcome to the Forums of HP Support! It's a good place to find the help you need, other users, HP experts and other support staff. I understand that you have a problem with fax reports. I'll be happy to help you.

  Click on the setup button (it looks like a key)

  Use the right arrow until the screen displays "reports." Press ok

  Use the right arrow for "fax reports. Press ok

  arrow on the right for "Fax error report. Press ok

  arrow on the right for 'On Send Fax' only or 'never '. Press ok

  This will make only prints fax error report when a fax that you send does not cross or never if you do not wish this report at all.

  I hope this helps. Please keep me informed of the progress of things.

  If you need help, let me know and I will gladly make all that I can to help you.

  Please let me know if that solves the problem by marking this post as "accept as a Solution.
  To simply say thank you, click the Thumbs up below!

  Thank you.

• localToGlobal bad reports coordinated

  At least, I think it is.

  I have a movieclip called reference a 0,0. It's large, high 800 700

  Reference contains a clip called theStatusArea to 600,0. It is wide and high 700 200

  theStausArea contains a movieClip called pieces 10, 410. It's 180 wide 180 high

  parts contains a number of movieclips (triangle, square, etc.),

  all these movieclips void are narrower than the container of parts and are all added to the container of parts at 0,0

  var pt:Point = new Point (triangle.x, triangle.y)

  PT = triangle.localToGlobal (pt);

  trace (PT); should be 610, 410 at least at the beginning.

  When I drag the triangle, looks like it does he brings it right up until I get to halfway across the screen, how the x numbers all negative report. I don't know what is happening, but it seems I'm missing something here.

  CharlesTCR wrote:

  So, it's weird, and I don't know why it works, but when I replace this line

  Pt1 = obj.localToGlobal (pt1);

  with this

  Pt1 is objparent.localToGlobal (pt1);.

  everything gets reported correctly. I still have no idea why I can't convert the point directly on the object and I don't think I'm doing something weird.

  Thanks for your help!

  I encountered this problem myself a few times... the localToGlobal syntax can be a bit decieving.

  Copy the following code gets the coordinates of the object within its parent coordinate system and made a new point of them:

  Pt1 = new Point (obj.x, obj.y);

  Copy the following code gets the global coordinates of the coordinates of obj (pt1) within its own coordinate system (not its parent!):

  Pt1 = obj.localToGlobal (pt1);

  So basically you're get a point in a coordinate system and then find the global coordinates of this point in its system of the child.

  So your second line of code is correct, you find a point in the parent and then find the global coordinates of this point within the parent company.

• Bad report on Ipad

  I need help, I do an Ipad app and will add video clips, before adding them to Indesign video is 720 X 576 16:9, but when imported and read on the Ipad, video are square pixels... How can I fix?

  It seems to me on the office content viewer but I don't look on an iPad.

  There is something wobbly with this file.

  Bob

• Bad report l / h

  I created what I thought, it was a wide screen of the mpg clips from a Sony Handycam video.

  The parameters of the project have been horizontal vertical x 576 (PAL) - 720 as described elsewhere in these forums.

  I have encoded and burned the rusulting on record as Pal_Widescreen_DolbyDVD project,

  To my surprise the video playing in the 4:3 aspect. Of course, I did something wrong?

  Can someone tell me what?

  Thank you

  Jim

  Have you selected the project setting widescreen when you created the project first?

  

  See you soon,.
  --
  Neale
  Insanity is hereditary, get you your children

• convert datalog reference to "generate report object Referecnce.ctl".

  I inherited a LV6.1 code with a lot of reports. The former reference number of datalog used to refer to the reports has been updated report object Reference.ctl.

  In the original code, the first step is to check if the number of datalog was not "a path/number/RefNumber '. But this function no longer works with the new "report to" the object. Is there something else I can use to reproduce this function?

  Thank you.

  Hi efarr,

  I'll do what I can to help you with your problem.  First of all, I need to know what version of LabVIEW, you try to run the LV6.1 code that you have inherited.  You can try your report at the node of wiring to another function of reporting (such as programming > report generation > progress reports > get a report Type) and the error on the node of wire to the terminal case selector on the structure of your business.  If the report is Type VI Gets a bad report of signal, it should output an error which will then control the structure of the case.  Instead of 'True' and 'False' cases, we had you previously, your case will read "Error No." and "error".  Without understanding your entire application I can't be sure this work around will make your program works in the same way.

  I would like to know if it works.  I hope that you will soon be operational.

• with selector Agent Dashboard App availability report

  Hello

  on 5.6.4 I try to create an availability report of the App with Agent dashboard selector.

  But what creation I'm lost by choosing the right element in Add a report View.

  I have tested many of them, but never could generate the same graph.

  The image of App availability with selector Agent Dashboard is attached as a file.

  Thanks for help.

  I'm not a fan of this point of view and think it would make a bad report because it only shows the current values.

  But if you really want to be able to abandon this view in a report, you can do this by adding "Reportlet" for the purpose of notice "Operation/AppMonitor/App availability with selector Agent systems" in the definition of WCF configured Editor.

  Kind regards

  Brian Wheeldon

• Urgent assistance needed with reminder please!

  Hey guys. I am very confused at the moment and really need help ASAP please! I created a DVD of marriage and after I burned the disc in reminder (CS5.1) project, then put it in my PS4 play, everthing seems blurry and low resolution! My menus of the title does not appear in high resolution, as when I checked before with just my USB connected to the back of my TV... the image is perfect. However, via the disc, he seems to have lost a lot of quality and sharpness. Help would be appreciated.

  Thank you.

  You probably have a bad installation/activation of SOUL. I would point out that screenshot (left) in the forum of the SOUL. Look at help-> and to report to the version that you have. Also the version of PR.

• FirefoxOS crash overlays added through almost everything

  A month before while I was taking a call, firefoxOS crashed into a whole.

  It restarted without having to reboot the phone (not sim lock).

  a mozilla crash reporter has opened and I sent the mozilla crash report.

  After that most of the installed applications appear white.

  but all the content is there. I can scroll, I can type, I can drag, I can call. but I have to do it blind.

  I added a few screenshots that will show the problem.

  Question: How to read the crash with BAD report?
  Question: How can I return to a normal diet? (best wouldt be true ADB/recovery)

  Phone: Alcatel One Touch light E (X 6015) system: FirefoxOS 2.0 (obtained through update FOTA to Christmas as described here: https://www.soeren-hentzschel.at/mozilla/firefox-os/2014/12/25/fire-e-alcatel-one-touch-verteilt-firefox-os-2-0-und-firefox-hello/ )

  Unfortunately I can't systemsettings to see the build number exactly...

  I made a solution myself - >

  cause: send the phone to any outcome of partner service within 3 to 5 weeks of wait times just to get a reset of the software (in min.) is really annoying for me.

  I deleted the cache and done a factory reset in recovery mode, which i have reached now the volume to top + power button together on the tour off the phone.

  That did the trick.

  PS. : I'll start now I have other questions

• Good for Satellite M40 DVD DVD player model

  Can someone tell me what model of drive of DVD the Satellite M40 (PSM40A) was supposed to come with?
  According to Windows (XP Pro), mine was initially a carpet * a UJ831S, the version of firmware 1.00. Due to problems with this drive, it was replaced under warranty by Toshiba.

  According to the label, the new disc is a carpet * a UJ840, with annotation HW 1.10 FW 1.40, which I assume the hardware and firmware versions respectively. Problem is that this drive is reports still on Windows as a UJ831S, a firmware version 1.40 now.

  I am sure that Toshiba write their own firmware for these drives and so have control over what is reported for Windows. I suspect that this model of M40 should never take a UJ840 and so it's to be deliberately badly reported to Windows as a UJ831S. I never saw the label on the original disc and have therefore no ideae if it was actually a UJ831S.

  The reason why I'm curious is that I always have problems playing some audio CD original with this player and think that it could be a problem of hardware compatibility. It is certainly not a question of protection of the CD, and the CD set fine on other laptops I tried them, with the exception of Toshibas with Mat * one or recorders of DVD Teac.
  Toshiba say that nothing can do more.

  I must point out that this laptop was purchased in New Zealand and can be specific to the Australasian market. I write here because the New Zealand from Toshiba web site (actually ends up on the Austraian site) does not appear to have a forum.

  Thank you
  Malc

  Hello

  I studied a bit in the internet on the disc that came with this unit but I can't find useful information about the name of the drive and which drive was delivered with this device, but I guess it was a UJ831S.
  However, I suggest that the new drive is UJ840, but the Windows operating system recognizes this disk as a UJ831S because of the firmware.

  I found this topic on the identification of bad player:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=10034&start=15

  In this case, the drive was out of life, and he was replaced by another having the same properties.
  I think that he is even on your laptop.

• Memory Manager virtual incorrect declaration of free space

  In Windows 2008 R2, I am trying to move the paging file on drive E: which is 4,09 4,09 free TB TB.
  When in virtual memory Manager, I click on drive E: it see the Space Available: 97602 MB.
  I have 128 GB of ram in the server, and it's not enough space for the size of swap file I need, not to mention the fact that it is a bad report.
  I tried inputing the initial and maximum custom size I need, but it said E: is to small for the maximum paging file.

  Everywhere wherever I look in Windows 2008 R2 it reports the correct size for E: except in The Virtual Memeory Manager.

  Anyone has an idea how to solve or work around this problem?
  I really need to move the file pageing on the C: drive.

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums:

  http://social.technet.Microsoft.com/forums/en-us/winserverhyperv/threads

• AVG free antivirus or microsoft security essentials! What is the best?

  Ive got a dell inspiron 1525 and I have windows vista 32 bit. I don't know if I have to use security essentials package or avg anti-virus. I can also use the mcafee security suite. I just need some experienced or professional advice and appreciate it if someone could help me! Thank you!

  Everyone has their own personal likes/dislikes to security programs!
  You opened a can of worms!

  And security Suites(Norton, Trend, McAfee) are just Bloatware.
  They try to be everything to everyone and fail.
  They also use a lot of your system resources to run.

  I do not use one of them; AVG or MSE.
  There are bad reports about the compatibility of the 9.0 AVG and MSE is a new kid on the block.
  I'll wait and see how MSE pans.

  I use builtin Vista Firewall.

  I use Avast AV:

  http://www.avast.com/eng/download-avast-home.html

  Avast anti-virus is XP, Vista and Windows 7 compatible, FREE, automatic update, and a user of low resources from your computer.

  And, don't have 1 (one) anti-virus installed / running on your computer at any time.

  Conflicts, crash and freezing may occur if you have more than 1 (one).

  And for an Anti-malware program:

  http://www.Malwarebytes.org/MBAM.php

  Malwarebytes is as its name suggests, a Malware Remover!

  Download the free Version from the link above.

  Download, install, upgrade and scan once a fortnight.

  Something for you to think.
  Once others have also responded, weigh the pros and cons of each.

  See you soon.

  Mick Murphy - Microsoft partner

• "this device cannot start (code 10)", which means code 10?

  I was alarmed because I could stop my computer because of a 'message' came onto my computer and I was able to get off. So he would'nt stop. I was installing some new drivers with my Scanner Driver Uniblue, when this happened and so I Google'd up Uniblue to see if I could know what I could do about it, and I found there an investigation on the system cleaners and uniblue was last on their list of 5 questioned, and there were a few bad reports on this subject. I also had on my system, cure of Parelogic pilot, who had slipped completely under my guard through an email from the author of 'Math better explained', an e-book that I had downloaded some time ago and I have now seems to be a fake email because when I looked towards the top of Parelogic there was so many complainants and we even said that they do absolutely nothing positive and in fact that their objective is to implant the computers people and they must be reported to the FBI.

  In any case I finally understood how to disable the offending message. But now I'm worried about 10 network cards that have yellow triangles with! "s with the message"this device cannot start (Code 10) ". It's probably just because I have no network connection, but I can't be sure until I have find this code 10 means,.

  Thank you for your trouble,

  calicoghotmail

  Hello calico.ghotmail,

  My apologies for the delay in the response to this topic.

  Code 10 means that a device could not start.

  If there is no network connection on this computer, then this might be a possible reason for this error.

  Let us know if you have any questions.

  Best regards

  Matthew_Ha

• Cannot use scan command or windows update sites. He asserts that "the dependency service or group could not start.". I also have the error of 0x8007042c code.

  I can't download, install or uninstall since I had the free version of AVG Anti-virus, anti-spyware protection. I cannot turn off and can not download MSE. I'm panicking because my computer is not protected! Help, please! I'm not computer savvy, just everyday normal person that is extremely frustrated and at my wits end! Quick responses are most appreciated! Thank you

  Hello

  There have been bad reports are circulating about the latest AVG

  Download and use the tool to remove AVG from the link below to get rid of

  Choose your version of vista: 32-bit or 64-bit for the correct removal tool once it

  Click Start on your computer - computer right click - Properties - he will tell you he whether 32-bit or 64-bit vista

  http://www.Avg.com/us-en/download-tools

  then install MSE

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=e1605e70-9649-4A87-8532-33d813687a7f

  If you want to use another free AV Avast Anti-virus is very good too

  http://www.avast.com/free-antivirus-download#TAB4

  Make sure that you only have a SINGLE antivirus installed

  and if you need a good anti-malware program, which is highly recommended that you have these days, use the version of MalwarebytesAnti-Malware FREE

  http://www.Malwarebytes.org/MBAM.php