Bad report on Ipad
I need help, I do an Ipad app and will add video clips, before adding them to Indesign video is 720 X 576 16:9, but when imported and read on the Ipad, video are square pixels... How can I fix?
It seems to me on the office content viewer but I don't look on an iPad.
There is something wobbly with this file.
Bob
Tags: Digital Publishing Suite
Similar Questions
-
Ethernet/IP: ControlLogix bad reports class with Demo.vi
Demo downloaded from...
http://forums.NI.com/NI/board/message?board.ID=nilabs&message.ID=279#M279
Which is pretty much exactly what I had tried on my cRIO (got the 'Type of Segment invalid' on the cRIO). So I've punted and ran the demo on my PC.
Thus configured ControlLogix 1756-L55 (Firmware V16.03) by the demo...
Yet as you can see Clx class bad reports. The demo affects indeed Instances of Assembly 100 and 101 via constants. There is nothing to configure. What Miss me?
More information:
1756 - ENBT is Rev 4.3.2 @ 192.168.1.2
cRIO: 192.168.1.1
PC:192.168.1.199
Industrial communications FOR EtherNet/IP: V1.2.0 (MAX shows it installed on target cRIO)
For future stabs in the dark...
PC-wise:
For some reason any. Remove the generic Ethernet Module, add to Controllogix project and re - download got to work.
cRIO wise:
My original config had a real (SGL), a FORCE (I32), and a (U8) SINT grouped in a cluster and then flattened in a 9 byte array. It was produced for ControlLogix on instance 100. A symmetrical body 101 has been consumed. When executed on the cRIO - the ControlLogix has pointed out an electronic inlay - incompatible error code produced. Not really useful (thank you Rockwell).
So I disabled popup everywhere wherever I could - with no improvement.
On a whim, I remove the SINT (U8) of the cluster, this changed the array of bytes length 8 bytes. I adjusted the constants of size in BT and deployed. I adjusted the side ControlLogix accordingly and downloaded. He started to work without problem?
Go figure. Someone at OR can look at this because I can't imagine a reason why you need to limit a config to the sending of an even number of bytes.
-
Overview of very bad police on iPad retina (SE CC)
Sorry everyone, I have a small problem: I created a page in 1024 x 768 with a font to 18pt and preview on iPad retina is very bad (great on iPad 1/2).
I need to work on an application SE for all the iPad - what do I do? PDF article? Or what?
NB: can I built one single App HD 2048 x 1536 edition?
Also SE Creative Cloud Edition?
I ask this question because I know that SE Creative Cloud Edition are minor features SE standard (ex: Analytics).
Thank you!
If get you an overview through the decorative Panel, it will create a folio hatched. Maybe that's the problem.
I would suggest the creation of a folio, make sure that it is the 'PDF' format, and then add the article, then use "Folio Preview" from the Folio Builder Panel.
-
bad reports (activity report no activity reported)
my emails keep reports no activity on my daughter's pc, even if everything is put in operation. can you help me?
Original title: false reports
Hi wendy,.
Welcome to the Microsoft Community Forum. I understand that you have questions about Family Safety does not record the activities on the activity report, even if it is enabled. I will assist you on your request.
If you install the report of activity after a week, but reports reflect all activity on your child's account, it is possible that your parental control is lagging and needs to be updated. To resolve this problem, please follow the steps below:
1. make sure you use the latest version of the parental control. Visit the site below for the latest version of the parental control
2. make sure that you update the customer of parental control Filter. Visit the site below for instructions:
Update the family safety filters
The filter can take a few hours to update in some cases, it is advisable that you give a day and try again.
Let us know the results later.
Thank you.
-
MPF M127fn: How to disable fax on each ring bad report
Hello
Can you please explain to me how to disable printing fax activity on each ring of error log?
Problem is that, every time when someone want to talk it is accidentally fax calls, and it prints then fax fax activity log is not received. This happens in many as much as someone called fax per day.
Hi @markometabo,
Welcome to the Forums of HP Support! It's a good place to find the help you need, other users, HP experts and other support staff. I understand that you have a problem with fax reports. I'll be happy to help you.
Click on the setup button (it looks like a key)
Use the right arrow until the screen displays "reports." Press ok
Use the right arrow for "fax reports. Press ok
arrow on the right for "Fax error report. Press ok
arrow on the right for 'On Send Fax' only or 'never '. Press ok
This will make only prints fax error report when a fax that you send does not cross or never if you do not wish this report at all.
I hope this helps. Please keep me informed of the progress of things.
If you need help, let me know and I will gladly make all that I can to help you.
Please let me know if that solves the problem by marking this post as "accept as a Solution.
To simply say thank you, click the Thumbs up below!Thank you.
-
A bad start ios IPAD Landscape Mode screen orientation
Dear developers, I hope that someone has encountered the same problem I have and has a solution. When the application opens, initially, I get the correct start in landscape mode screen showing upwards, but then a split second later, it seems that the same splash screen is rotated 90 degrees and appears distorted in portrait mode. The application was designed for the landscape mode ONLY and apart from this problem, works perfectly well.
I created a single app for IPAD. I use cs6. I use the latest version of AIR 16.0.0.250. I created a file ipa ADHOC with the following publication
Landscape format
Fullscreen is checked
Auto orientation checked
Make the Mode: GPU
Resolution: Standard, although I had the same problem with HIGH resolution
Files included
Default - Landscape.png
I have created several applications in the past with different versions of AIR and have never had this problem.
Thanks for any help/hint, you can provide.
Justin
I logged this bug yesterday. You could go and vote or add notes:
Bug #3915279 - launch image twitches from landscape to portrait
For now, use build 222.
-
localToGlobal bad reports coordinated
At least, I think it is.
I have a movieclip called reference a 0,0. It's large, high 800 700
Reference contains a clip called theStatusArea to 600,0. It is wide and high 700 200
theStausArea contains a movieClip called pieces 10, 410. It's 180 wide 180 high
parts contains a number of movieclips (triangle, square, etc.),
all these movieclips void are narrower than the container of parts and are all added to the container of parts at 0,0
var pt:Point = new Point (triangle.x, triangle.y)
PT = triangle.localToGlobal (pt);
trace (PT); should be 610, 410 at least at the beginning.
When I drag the triangle, looks like it does he brings it right up until I get to halfway across the screen, how the x numbers all negative report. I don't know what is happening, but it seems I'm missing something here.
CharlesTCR wrote:
So, it's weird, and I don't know why it works, but when I replace this line
Pt1 = obj.localToGlobal (pt1);
with this
Pt1 is objparent.localToGlobal (pt1);.
everything gets reported correctly. I still have no idea why I can't convert the point directly on the object and I don't think I'm doing something weird.Thanks for your help!I encountered this problem myself a few times... the localToGlobal syntax can be a bit decieving.
Copy the following code gets the coordinates of the object within its parent coordinate system and made a new point of them:
Pt1 = new Point (obj.x, obj.y);
Copy the following code gets the global coordinates of the coordinates of obj (pt1) within its own coordinate system (not its parent!):
Pt1 = obj.localToGlobal (pt1);
So basically you're get a point in a coordinate system and then find the global coordinates of this point in its system of the child.
So your second line of code is correct, you find a point in the parent and then find the global coordinates of this point within the parent company.
-
I created what I thought, it was a wide screen of the mpg clips from a Sony Handycam video.
The parameters of the project have been horizontal vertical x 576 (PAL) - 720 as described elsewhere in these forums.
I have encoded and burned the rusulting on record as Pal_Widescreen_DolbyDVD project,
To my surprise the video playing in the 4:3 aspect. Of course, I did something wrong?
Can someone tell me what?
Thank you
Jim
Have you selected the project setting widescreen when you created the project first?
See you soon,.
--
Neale
Insanity is hereditary, get you your children -
My iPad is stolen and I want to block
My iPad is stolen. How can I make sure that the iPad is not used by anyone?
If your iDevice is lost or stolen
If enable you find my phone before it was lost or stolen, you can track only when connected to the Internet by Wi - Fi or cellular. What you can't do, is follow your device using a serial number or other identification number. Neither Apple nor anyone else may find your device. You cannot recover your loss unless you make sure your device for the loss. It is not covered by your warranty.
If your iPhone, iPod, iPod Touch, or iPad is lost or stolen, what do you do? There are things you should have done in advance - until you have lost it or it has been stolen - and things to do after the fact. Here are a few suggestions:
1. declaration of a lost or stolen Apple product
3. AT & t. Sprint and Verizon can block phones stolen/tablets
4. What-To-Do-When-Iphone-Is-Stolen
6. what to do if your iOS device is lost or stolen
7 6 ways to track and recover your lost/stolen iPhone
9 report Stolen iPad | Stolen lost found online
It pays to be proactive in following the advice on the use of find my phone before you lose your device:
2 set up your iDevice oniCloud
3. OS X Lion/Mountain Lion - in regard to my Mac
4 the free configuration find your iPhone (even on unsupporteddevices)
-
WiFi problem with iPad 4 on first generation Airport Express
Bad problem with iPad 4 / iOS9. It seems that it is connected to the wifi (my old airport express of first-generation lists my iPad as a connected device and in settings of the iPad, the connection has the usual blue tick). BUT Internet works only for a few seconds after a reboot (hard) and there is no icon of wifi signal on the status bar (to keep for the first few seconds after the eboot). All other devices (iPhone 6 on ios8.2, iPad 2, two Macs and a PC) work fine on the airport express (first generation). Stranger still, when I go into a public café with wifi on the road, the iPad 4 connects no problem at the station, on the status bar and the internet works, I see the usual wifi antenna icon. Final oddity, it suddenly stopped working and no software / firmware updates between the two. As mentioned, soft and hard that it recharges don't help in saving a few seconds DNS cannot be a problem because all other devices work correctly. I also tried to reset the network settings. It is esoteric.
As a test, temporarily change the wireless network name and password on the AirPort Express.
Make the name of... well very simple wireless network, no special characters (like an apostrophe) and no space empty. Ditto for the password.
Can the iPad4 connect that way?
-
convert datalog reference to "generate report object Referecnce.ctl".
I inherited a LV6.1 code with a lot of reports. The former reference number of datalog used to refer to the reports has been updated report object Reference.ctl.
In the original code, the first step is to check if the number of datalog was not "a path/number/RefNumber '. But this function no longer works with the new "report to" the object. Is there something else I can use to reproduce this function?
Thank you.
Hi efarr,
I'll do what I can to help you with your problem. First of all, I need to know what version of LabVIEW, you try to run the LV6.1 code that you have inherited. You can try your report at the node of wiring to another function of reporting (such as programming > report generation > progress reports > get a report Type) and the error on the node of wire to the terminal case selector on the structure of your business. If the report is Type VI Gets a bad report of signal, it should output an error which will then control the structure of the case. Instead of 'True' and 'False' cases, we had you previously, your case will read "Error No." and "error". Without understanding your entire application I can't be sure this work around will make your program works in the same way.
I would like to know if it works. I hope that you will soon be operational.
-
with selector Agent Dashboard App availability report
Hello
on 5.6.4 I try to create an availability report of the App with Agent dashboard selector.
But what creation I'm lost by choosing the right element in Add a report View.
I have tested many of them, but never could generate the same graph.
The image of App availability with selector Agent Dashboard is attached as a file.
Thanks for help.
I'm not a fan of this point of view and think it would make a bad report because it only shows the current values.
But if you really want to be able to abandon this view in a report, you can do this by adding "Reportlet" for the purpose of notice "Operation/AppMonitor/App availability with selector Agent systems" in the definition of WCF configured Editor.
Kind regards
Brian Wheeldon
-
When an update on iPad pro?
Font rendering is bad for the ipad pro. Help.
Hi damiank84015098,
We just published the new update (16.02.23) to the App Store on February 17, 2016.
The update includes support for iPad Pro and split view and drag on.
Please try it and let us know what you think.
Thank you!
-
Site scrolls on ipad and in Safari?
Hello
I have almost finished my site but it runs badly on an ipad. Can someone suggest why it is or give me advice to make better it?
http://wearebrightlights.BusinessCatalyst.com/
Also Office site scrolls wrong in Safari, but not in Chrome of Firefox.
Comments or thought are welcome. Thank you!
Ben
Reduce the total number of objects with effects applied either scroll using only not scroll on some effects or grouping items that have the same scrolling effect settings and set scroll effects on the group, not the elements within the group.
Performance of the methods used for scrolling effects JavaScript is poor in Safari over other browsers. The total number of objects with applied scrolling effects increases made the CPU/GPU load and the likelihood that the effects will be begin to appear in the jump/jitter.
-
I lost my iphone and its dead and I can't find on find my iphone help please!
I lost my iphone it also died and find my iphone does not. help please
Nothing we or anyone can do.
If your iDevice is lost or stolen
If enable you find my phone before it was lost or stolen, you can track only when connected to the Internet by Wi - Fi or cellular. What you can't do, is follow your device using a serial number or other identification number. Neither Apple nor anyone else may find your device. You can't recover your loss unless you make your device for the loss. It is not covered by your warranty.
If your iPhone, iPod, iPod Touch, or iPad is lost or stolen, what do you do? There are things you should have done in advance - until you have lost it or it has been stolen - and things to do after the fact. Here are a few suggestions:
1. declaration of a lost or stolen Apple product
3. AT & t. Sprint and Verizon can block phones stolen/tablets
4. What-To-Do-When-Iphone-Is-Stolen
6. what to do if your iOS device is lost or stolen
7 6 ways to track and recover your lost/stolen iPhone
9 report Stolen iPad | Stolen lost found online
It pays to be proactive in following the advice on the use of find my phone before you lose your device:
2 set up your iDevice oniCloud
3. OS X Lion/Mountain Lion - in regard to my Mac
4 the free configuration find your iPhone (even on unsupporteddevices)
Maybe you are looking for
-
iTunes won't let me not re-upload my already purchased album
I bought the Soundtrack of "The Phantom of the Opera" film and at one point some of the songs have been reading as unavailable to play, as at first I would play them and in less than a minute into the song, he could start again. Later he said that th
-
Enter the password administrator or power on password hp pavilion dv4-217
Hey my computer hp laptop pavilion dv4-217 showing me a blue screen with enter password administrator or power on password Deactivation of the system 67928329
-
With the API c for linux, how can I decimate the clock at a 10 kHz signal?
Hiya. I know that the clock signal is decimated on the chessboard in a few places... is there a function in the linux api c for export a decimated signal? Can I choose any arbitrary decimation, or am I limited to the various bases of time used on t
-
If I start Windows Mail, and then exit, DO NOT stop winmail.exe process.
Basically, this problem started sporadically about 2 months ago and now it happens everytime I open Windows Mail. When I open mail window, use it and then close it, I find that I CAN NOT reopen it. It gives me an error messagesay that another instanc
-
Disable Aero for Windows 7 - How can I activate this new?
I bought a new HP Envy 15, which has Windows 7 installed in it. Aero is enabled. A few days later, Aero was disabled in some way and I can't turn it on again. I used the problems in Windows 7 Aero Troubleshooter - it is said that everything is fin