bad series communication ports, in computer science labview8.0 run time installed on engine

Similar Questions

• That engine run time is necessary for communication series build Setup

  That engine run time is necessary for communication series build Setup

  You need NI-VISA. If you are using a National Instruments serial port card or device, then you also need OR Serial. All software can be found in the Technical Support page.

  Obviously, you have also the runtime for the software development environment itself as well. For example, for LabVIEW, you need to the LabVIEW Run-Time.

• Unrecognized Nielsen Home scan valid communications ports

  I'm pulling my hair out.  I spent 2 days on this problem.  I am a Scanner at the homepage of Nielsen and my scanner worked perfectly on my old computer running Windows XP.  I bought an i3 530 processor Quad (gateway) running Windows 7. I love except for this - when I install the software to be able to use the scanner, I get a message during installation that "Nielsen Homescan Internet carrier can't find any valid communication ports to communicate with the scanner."  Needless to say, I have lots of USB and some available Serial Ports.  I thought it was a firewall issue and went in, active ftp settings and all communication settings, nothing helped. I uninstalled Norton, in case that was the problem (installed AVG instead) because AVG has worked for me with this software to scan before but then again, nothing works.  It is obviously not a firewall issue.  I had contacted Nielsen and they thought it was their software on their site and sent me an installation CD that is supposed to work.  It gives me the same exact message!  Help!

  Hi again!  I just want you to know, in case someone else comes to you with this same problem, that the Homescan Tech people had developed their software for Windows 7 when Windows 7 is released.  Apparently, my version of Windows 7 was different and they went to work on this and found a patch for me to download and now I did two passes successfully and everything works as it was on my old computer.  I just wanted to share this information since you were kind enough to try to help me with this problem!  Thanks again!

• Cisco ASA 5500 Series 4-Port GE SSM

  Currently, we have 2 asa 5510 firewall and need to add the

  Cisco ASA 5500 Series 4 - Port GE SSM extension module. Can it be added when the device is turned on and running or the firewall must be turned off to install the plug-in?

  Hello

  You could try to ask this question of the team of firewall, as this page from the community for the physical security and video surveillance.  The team of firewall is located here:

  https://supportforums.Cisco.com/community/NetPro/security/firewall

• My icoud do not work in my phone but its work in computer science

  My icloud do not work in my phone but its work in computer science

  Set "do not work."

  iPhone overwhelmed?  version of iOS?

• Dell v313 printer - my printer is not communicating with my computer - I need enable two-way communication in the printer properties

  My printer is not communicating with my computer. He always tells me to activate the two-way communication option in the printer properties dialog box.

  How can I do this?

  MichaelMcQuillar,

  Please check your virus protection and firewall. They seem to block communications from the printer.

  Rick

• We had a power outage in our area, the computer was on and running, got the blue screen of death with the following: __0x000000C2, 0 x 00000043, 0xD6C61000, 0 x 00000000, 0 x 00000000 BAD POOL CALLER

  We had a power outage in our area, the computer was on and running, got the blue screen of death with the following:
  0X000000C2, 0 X 00000043, 0XD6C61000, 0X00000000, 0X00000000 BAD POOL CALLER

  If you have not saved your data and you want to start the computer with Linux Livecd such as Knoppix and copy your data files on an external hard drive. It is a precautionary measure before the step follows because things happens. ;-)

  Then do a repair installation.

  http://www.michaelstevenstech.com/XPrepairinstall.htm

  If the repair installation does not work, test the equipment to ensure that none have been damaged during the blackout and then do a clean install of Windows.

  http://www.elephantboycomputers.com/page2.html#Hardware_Tshoot

  http://michaelstevenstech.com/cleanxpinstall.html - Clean install - how-to
  http://www.elephantboycomputers.com/page2.html#Reinstalling_Windows - what you will need at hand

  If all goes well, no equipment was damaged during the shutdown. Consider buying a power supply (battery backup). APC and Belkin are good; for a computer, simply spend about $60. MS - MVP - Elephant Boy computers - don't panic!

• HP DesignJet 1000 series, a bad cable rear transport stop in the same place every time?

  Hello. On a series of 1000 HP DesignJet 1050c more think that FW A.52.02, a bad cable rear transport stop in the same place every time?  It stops just to the right of each start, attached photo Center.  Do not know if it is directed to the left or right at the time; I asked the customer, but it has not yet responded.  It is hundreds of miles away with customer.  I was not there; I try to get a very good idea of what everything I need and that you need to do before I travel such a distance.

  It gets the error "check printhead path type (2).  Customer said that began as he tried to pass to 24 "paper roll of I think 36" roll of paper.  Maybe this is related to the different movements to transport would be to manage different width, but there will be an underlying problem.  (Well, I guess it does now any width.)  I read that if transport stops in the same place every time when you start, it's probably one of the following:

  1 necessary transport height adjustment.

  2 tubes of rub excessively in the channel of tubes.

  3. bad transport (Mouasher Sa'ad says that the bad capacitors once a trolley stop at the same place;) Guess it could be a bad encoder sensor but think the transport would simply jump a quarter inch or so if the case.)

  Well, guess it might be something to the top with the belt too, so:

  4. bad belt (once I had 1 too short and kept cause type 2 error - stop inches couple out right every time)

  I cleaned and lubricated all - channel rods and tubes of cursor. It worked fine for 5 months.

  Here, I simply want to exclude ideally that a bad end cable would cause traffic to stop at the same place every time.

  Thanks for any input.

  Paul

  Usually, a bad end cable will not cause you have. It could be one of the items you listed, but could also be the encoder being dirty in this place. Most of the time it's the belt as a defect in a bad belt could stop at the same place. If the sheath is a problem most of the time it stops at the opening of the left side. Also, if the tubes most of the time you can fix a bunch of heavy clear packing on the rim tape, tubes rub against and which solves the problem.

• Why I can't play PINBALL SPACE CADET in the laboratory of computer science at our apartment, 1st floor, but not in my apartment on the 5th floor?

  I have an AVERATEC with a cracked screen, a LENOVO and HP, (with blu - ray player!).  I think that I was once on Windows 7 and I am now on Windows Vista.  I have a lot of plug-ins and surge bars in my apartment.  I have almost run out of space plub.  Sometimes operating a PC in my apartment is surprisingly easy, sometimes very skittish or not at all!  I got about all the problems in my apartment, you can imagine and then some!  Down in the laboratory of computer science at our apartment, I rarely have problems at all!  I WANT THE 3DPINBALL GAME: Space Cadet Pinball, I USED to HAVE IN MY APARTMENT!  Sanmartin suggestion did not work! I use free Hotmail.  It may be Windows XP I have.  I don't understand any of this.

  Hello

  This may help, I pulled off a XP system,

  http://mikemstech.blogspot.com/2011/11/how-to-get-Windows-XP-Pinball-in.html

• Printer is not communicating with the computer

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: I have problems with my Dell v305 printer I tried everything. Error message indicates that the printer is not communicating with the computer

  Hi vanessa James Sluys Veer,.

  Probably you should install/update your printer drivers for your operating system.

  Please see the link below for the Dell Web site:

  http://support.euro.Dell.com/support/topics/topic.aspx/EMEA/shared/support/DSN/en/document?c=UK&l=en&s=Gen&DN=1093016

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Lexmark Interpret S405 is not communicating with the computer and will not print

  My computer works with Windows 7 and updates automatically.  I got the Lexmark Interpret S405 for 18 months, and it has worked great until a couple of months.  When I try to print, I get an error message indicating that the printer is not communicating with the computer.  When I check the printer, it shows he's ready.  The print job shows that it is ready to print, but nothing happens except for this message.  When I try to erase the impression, it really takes a lot of time - usually have to unplug the printer so that it can finally clear.  Then it still will not print if I try again unless I restart the computer.  Lexmark support page says that there is a problem with Windows 7 and their product.  All the solutions for this problem yet?

  Computer model of the bridge ZX6970, OS 64-bit, intel CORE CPU I-13 3.30 GHz, Windows 7 Home Premium.  Can someone advise a fix for this problem?  Thank you!

  Hello

  Have you tried to download and install the updated firmware for the Lexmark Interpret S405 from the manufacturer's website.

  If this isn't the case, please download and install it.

  Download Firmware for your printer!

  We know the results.

• My computer is completely messed up after installing the latest updates from Microsoft. I need help/ideas to make it work again.

  Vista Business Service Pack 2
  32 bit
  2007-12-office
  Acrobat 9 Pro
  Adobe Design Standard CS4
  Sony Vaio

  I installed the latest vista updates today.  Three "important"; an option.  The optional parameter was an update of bluetooth toshiba.  We were talking about "platforms" that made me uncomfortable so I went to Microsoft and after reading it, I decided - based on little understanding - it was probably necessary.
  Shortly after, Acrobat 9 Pro wasn't working anymore. The computer asked me to restart after installing updates, but I have done a couple of things, including some e-mail.  During the attempt to send e-mail until I turned off the computer, Outlook flash he has been restarted and then the icon to install flash and then I could come back and type until the sequence started.

  I turned off the computer and when I rebooted, it did not start.  I managed to get it started; I run scandisk; now, when it starts to get a series of errors from Adobe for various Adobe programs that I installed on the machine all seem related to the "Automatic Setup" (or boot, I don't remember exactly.  I tried to re - install Acrobat and I get an error message that the 'source' is not available, and to ensure that it is - despite me using the installation disc, so I guess that it refers to the 'source' in Vista.  Outlook does not start.  He told me to use scanpst.exe to analyze the .pst files, but they seem to have disappeared.  I have tried other products of office except Explorer who started without problem.

  I can't use restore because it says that the disc is damaged and needs to be checked.

  Any ideas are appreciated.

  Uninstall the update for bluetooth.  Never use Microsoft device driver updates.  To avoid this does not happen, you must disable automatic updates in Windows Update driver as follows: http://www.addictivetips.com/windows-tips/how-to-disable-automatic-driver-installation-in-windows-vista/.

  Go to start / all programs / accessories / command prompt and right click on command prompt, and then click Run as administrator.

  Type sfc/scannow, go and let it run.  It will scan and try to correct some of your system files.  If all goes well he comes complete with no corruption, it could not repair (if it has these post of corruption here or try to analyze it to find the problem or files using http://support.microsoft.com/kb/928228.

  While in the command prompt, type chkdsk /f /r and enter and let it run.  It will scan and try to solve any corruption or bad sectors on your hard drive and remove especially as a cause.  Who can release the OS to do a system restore or other recovery options.

  Do you know when this problem started (probably with updates)?  Try a system restore to a point in time BEFORE the problem started.  Here is the procedure: http://www.howtogeek.com/howto/windows-vista/using-windows-vista-system-restore/.  Don't forget to check the box to show more than 5 days of restore points.  If the first attempt fails, then try an earlier point or two.  NOTE: You will need to re - install any software and updates that you have installed between now and the restore point, but you can use Windows Update for updates.

  If the system restore does not work, do a startup repair, boot from the disk Installation of Windows Vista genuine (or one that you can borrow from someone) or a recovery disc.  Here is the procedure: http://www.bleepingcomputer.com/tutorials/tutorial148.html.  You may need to change the BIOS to do first the CD drive in the boot sequence to boot from the CD.  To do this, hold the screen that tells you the key F to push to enter the menu start or start of installation.  Push it quickly. Make the changes, save your work and exit.  Put the CD in the drive and reboot.  When you are prompted, press any key to boot from the CD.

  If you do not have a floppy disk, you can make a bootable recovery disk by using http://neosmart.net/blog/2008/windows-vista-recovery-disc-download/ with burning software like: http://www.snapfiles.com/get/active-isoburner.html and, of course, a blank CD.

  If this does not work, try to start in safe mode (repeatedly hit F8 key so that the start and go in safe mode with networking).  Then we will check some of your system files:

  If it does not, then thanks for posting any repetitive error message in Event Viewer on startup (Start / Control Panel / administrative tools / Event Viewer).  Here's how to use Event Viewer: http://www.bleepingcomputer.com/forums/topic40108.html.

  If this does not work, you will need to do a repair/system upgrade using the Windows Vista Installation disc authentic (you own or that you can borrow from someone).  Here is the procedure: http://www.vistax64.com/tutorials/88236-repair-install-vista.html as well as the upgrade from an earlier version of the Windows section of the following: http://support.microsoft.com/kb/918884.  Although this will not affect your data, settings or programs, you should always back up your data before you start just be on the safe side. If other procedures do not work, it is almost certain to work.  You can have a lot of updates to re - install (including all you need to remove service packs).  If the version on system with SP1 or SP2 preinstalled cane and the disc is an earlier version, then you will need to do a slipstream drive as follows: http://www.vistax64.com/tutorials/151606-vista-sp1-slipstream-installation-dvd.html.

  I hope one of these procedures can solve your problem.  If this isn't the case, after return and we will try something else.  Return message anyway so we know how it turns out.

  If none of these steps work, transfer your question in Forum Windows Update: http://social.answers.microsoft.com/Forums/en-US/vistawu/threads where the people who specialize in updating the questions will be more than happy to solve your problems.  Don't forget to tell them what updates you downloaded and installed, and what steps you have already done to try to solve the problem.

  Good luck!

  Lorien - a - MCSE/MCSA/network + / A +.

• Windows Live OneCare: I downloaded Windows Live OneCare scan my computer and everytime I run the program it gives me the same results.

  I downloaded Windows Live OneCare scan my computer and everytime I run the program it gives me the same results.

  But he never cleans or removes anything just the same results each time.  How to clean my computer?

  Found registry 7, 1cleaned, 6 errors.
  0 was ignored by the user.

  COM/active (1 error, 0 has been ignored by the user)
  File type associations (4 errors, 0 has been ignored by the user)

  System softward (1 error, 0 has been ignored by the user)

  Found 3140,6 MB, cleaned or compressed
  1.3 MB of temporary files and other
  C:\
  D:\

  Network security
  open ports 0

  Hello

  Are you logged on as ADMINISTRATOR when you access the scanner?

  Some errors cannot be fixed by the scanner, and many of those who are not at all important.

  Check-in of the Windows Live a Forums

  Security scan bulletin boards and return products
  http://OneCare.live.com/site/en-us/community/default.htm

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Skype itself uninstalled from my computer. Now I can't install it.

  I'm so frustrated at this point. I have the ownership of the file. I am the administrator of my computer. However, I get the error that I need the permission of the administrator...

  I dwell on the earlier statement of Skype out himself.

  I have Windows 7. Yesterday I tried to log in and it said I needed an update. The update (who tried to run for months now) would not move. So yesterday when he failed once again, instead of sending me to Skype without doing the update, it just completely gone from my computer. Not in the menu, could not search for it, was NOT in the list of programs to uninstall. Not at all. He disappeared completely and totally.

  I went to Skype.com and downloaded again the installation. Tried to run the file and stops before it can install, it tells me I need permission. So I started on and ran the installation by right-clicking and choosing "run as Administrator" (which is not necessary, because I AM the ADMIN). Same thing happened. He said that I need permission from the admin. What is going on?? I don't understand this at all!

  I searched the community to find answers, and there is not. The "answers" will eventually be dead years ago links. There is no contact form visible on this page. It is enfuriating...

  You can try this:

  http://community.Skype.com/T5/Windows-desktop-client/impossible-to-install-v6-13-0-104-error-1603/m-...

• When I share HP LaserJet 4200 printer from a 64-bit Windows 7 computer and you are trying to install the driver, it says driver not found. * INI file missing

  Original title: Reader for printer HP LaserJet 4200 for Windows 7 gives problem

  My hp laserjet 4200n printer is connected to a print server of XP through the parallel port, when I share this printer from a 64-bit Windows 7 computer and you are trying to install the driver, it says driver not found. * INI file I already Miss down site fromhp driver loaded but invain.

  Please suggest

  Hi Mohammed Arif a. R,.

  You can try to plug the printer again and check the updates of Windows and see if the drivers are install.

  Install Windows updates in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/install-Windows-updates

  You can also view the following HP Web site and try redownloading drivers and check.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=84033&prodTypeId=18972&prodSeriesId=84028&swLang=8&TaskID=135&swEnvOID=4063

  Also check out the following link and try the suggested steps.

  Network printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

  Note: This article also applies to Windows 7.

  Hope this information is useful.