bandwidth network and iTunes
I use Little Snitch Network Monitor on my iMac. Earlier today, I noticed that the monitor showed a constant flow of data going down. When I looked, he showed that iTunes had 37 connections to the server and that was a total traffic of 55MO upward and 11.4 Go down into the last day and a half. I work from home so I tend to leave iTunes running all the time even if I do not use it. I turned off sharing at home and stop sharing my library on my local network only on the possibility that something was hammering. It made no difference. Network traffic drops only when I closed iTunes. As soon as I stopped him, the descending stream stops. I'm on fiber, so I'm not really worried about my use of the data, but if I let on, we are talking about about 150 GB of data in a month when not in use. The only thing that has changed is the recent update of iTunes. I'm not in the beta or GM of Sierra. I'm always on the latest version of El Capitan.
Someone has seen this, or has any idea of what could be the cause I have?
It had to be something Apple like this on the back-end. He passed for another day and then stopped.
Tags: iTunes
Similar Questions
-
I can't connect my iTunes account because it says to make sure that my network connection is active but my internet is not working well. So what can I do to solve this problem
Hello
You can check out the link and check if it helps.
https://support.Apple.com/en-us/HT202649
If the problem persists, you can contact the Apple Support for help on this issue.
Thank you.
-
the title update: itunes original
I was invited to update itunes so I could update my iphone, during the Update Setup stopped because he couldn't uninstall Hello, I tried to uninstall it manually but says its part of a network and cannot be uninstalled. so now I have no itunes.
Hello
1. what operating system do you use?
2. What is the exact error message you received?
I suggest you follow the link and check.
http://support.Apple.com/kb/TS1331
Provide more information on the issue to you help again.
-
Using Apple TV in industry - Apple ID and iTunes
I don't want to use my personal account by identifying Apple and iTunes for Apple TV company I plan for airplay, etc.. The installation requires an identifier apple and one active iTunes account? If so, how do you get around that?
Thank you
No, it isn't. You can ignore the Apple ID configuration entirely if you wish.
You can set the Apple TV using the conference room, and it then displays a set of instructions about how to connect on screen, and the name of the network its connected to.
-
Hello, the Service stops
I have several XP Pro PCs on a network and install a new mixer and re-install a NAS driving etc the Bonjour service ' should output "on several PC. Although I was able to restart the service through administrative tools, Services I would like to understand why this service should pick out? It involves service of buggy code that can't cope? I've rarely met other Services just to die. No idea why this is happening and how I could avoid happening again as a normal user do not know how to fix it.
Unless you have Apple computers on your network (or a PC with the Apple software like iTunes and you share iTunes music between your computers), you need not Hello. Just, stop the service and set its startup type to manual or disabled.
-
Hi, I use the Java API of Sigar to get CPU load and free memory (in percentages) and there is also a lot of good examples on the sources provided showing this kind of functionality. However, how can I use Sigar to get a similar percentage for the use of the network? It doesn't seem to be an example of how you could get this information. I understand that the metric is not very well defined, but I was thinking something in the sense of the amount of traffic entering and leaving as a percentage of the bandwidth of the Network Interface Card. Windows 7 provides at least one such metric in the Manager of tasks, tab 'Networking' and I was trying to get something similar using Java and Sigar.
You should take a look at these Java API class:
NetInterfaceStat
You can get the values:
RxBytes
TxBytes
Speed
For a list of the detected interfaces a Sigar object has a method called:
getNetInterfaceList.
This allows to detect return of the ETH network, wifi and loop devices. You will need the name of the specific interface OS when getting a reference to the NetInterfaceStat object.
The tricky part with the use of the network is the implementation of the platform of SIGAR with each operating system. If my memory is correct that Linux has a NOT_IMPLEMENTED indicator set for the interface attribute speed (done in the OS interface layer in the SIGAR C code). I did some experiments under Linux to get this value and its root very intertwind with level permissions to query the hardware. For Windows, you should be fine. For Linux have a way to pass a value configured in your application.
Good luck.
-
App store, Safari and iTunes does not connect to the Internet after installing macOS Sierra
App store, Safari and iTunes does not connect to the Internet after installing macOS Sierra
After upgrade 'OS X El Capitan' to "macOS Sierra" window only empty "App store" and page "Safari" made its appearance, no error message shows. store "iTunes" and "Dictionary" does not connect too.
But Google chrome works well.
So have you tried the next steps in your original post that Safari does not work after installing macOS Sierra:
2) Advanced the steps to correct the problems with the iTunes Store - Apple Support connection
-
My 5s iphone suddenly showed no service, then I made an attempt to update to ios and itunes connected, now iphone is not enable and display cannot connect to the server and in itunes it shows unable to check your device.please help me
Assuming that you have a valid SIM card in the phone, it is more often symptomatic of a phone that has been hacked or jailbroken to unlock.
Where do you have the phone first?
-
So I recently had my password wrong too many times and my iPhone 4S locked out telling me "iPhone is disabled; Connect to iTunes'. And so I connected to iTunes and decided to restore my phone. I finished the process of restoration of the configuration of my phone, but ultimately, it was not even let me in the phone! Once AGAIN he said "iPhone is disabled; " Connect " to iTunes '. However, this time, this message appeared just when I turned on my phone with a black background. I didn't scan the screen for the error message is displayed (and there was no time to be shown). When I tried to connect to iTunes again as he asked, now it says "iTunes can not connect to the iPhone because it is locked with a password".
So now, he said "iPhone is disabled; ' Connect to iTunes' on my iPhone 4S and ''iTunes can't connect to the iPhone because it is locked with a password ' on my computer. WHAT should I do?
As described in step 2 of "Erase your device with iTunes" in this article, you will need to use the Recovery Mode.
Recovery mode is described in this article as well. You may try to go into recovery mode more than once to succeed.
-
10 IOS and ITunes 12.1.3.6 compatibility?
Hello
I just want to be sure on the new IOS 10 and ITunes version 12.1.3.6, the two are compatible?
Thank you :-)
No, you will need iTunes 12.5.x, Windows 7 or later.
-
Comments of print with extreme network and printer HP Envy 4520
Project night and I have people coming. My comments and personal networks are set up. I have an extreme Airpot and a range of printers HP 4520. Is there a way that my guests and I can print from here. Other then to move networks back on my printer? I tell myself that I'm asking here before I ask HP. I seem to get better answers here. Thanks for any idea!
Users connected to the network 'Guest' cannot 'see' all devices in the 'hand' or 'private '. Only "see you" each other and connect to the Internet.
Same thing for users on the hand, or a private network.
If you want a user on the network to be able to print, then you will need to install a printer wireless network reviews.
If users on the main network and the guest network printing, then you need a printer for each network.
A Dingo workaround solution would be to ask him to send you an email with an attachment that you can print and give back their.
-
I got El Capitan and iTunes 12.4.3.1. I need to download QuickTime 7 or 10 of QuickTime to play an audio CD?
The two should work perfectly for an audio file, but I recommend
QuickTime 10
-
iPad is locked up on screen is white cord charger and arrow picture and iTunes symbol
iPad is locked... The screen is black with a picture of the logo of the charger, arrow and iTunes. Help
This means image that he went into recovery mode - you must connect the iPad, its cable to iTunes on your computer, which should allow you to reset the iPad and you can then restore/resync your content
-
my iphone 5 s has been disabled. I'm trying to restore my iphone with itunes and itunes asks me to put the password for my iphone. but my iphone does not display the unlock screen. What should I do now?
Hello
Follow the instructions here:
-
I allowed off all my computers several times and iTunes still shows that I have authorized 5. I can not re - allow one of my computers and cannot allow overall because I did last October. I tried a logout and back logging, remove the SC info folder etc... Any ideas?
I allowed off all my computers several times and iTunes still shows that I have authorized 5
Normally, you can only authorized computers off once a year.
Maybe you are looking for
-
I use Windows 8.1 and don't see the taskbar when I open Firefox
I need to clear my cache navigation and can't find the taskbar to start the process.
-
touchscreen frozen to officejet pro 8500 a910
Recently, the front touch screen on my 8500 has stoped responding in the bottom right of the area where the 'Ok' button normally appears. All other functions work fine, but I can't delete messages and returning to the home screen to fucntions as a c
-
Smartphone RIM blackBerry messages
This blackberry user had 2 questions - she scored the first one resolved, but had another question, please go to this link and let him know - thank you! http://supportforums.BlackBerry.com/Rim/Board/message?board.ID=8300&message.ID=40439#M40439
-
How to make a new partition on the HARD drive?
I have 500 GB of HARD drive (internal) in my Notebook.It has only 3 still drives. Among them, drive C = F - 107 .through 226 GB, E - 118 gb disk management, I've seen 2 discs unaccessable, is to saythe recovery-13, & system-approximately 1 GB.However
-
xmlserialize with special characters
HelloI am looking for a way to preserve special characters when using xmlserialize:When I run this query:Select xmlserialize (content xmltype('<Owner>Grand''co</Owner>').extract('/*') dash)Double;I get this result:< owner > big& apos; Co < / owner >I