banner for pix

Similar Questions

• Where Smartphones blackBerry is my memory last? Ugh! No memory for pix!

  Hello

  I tried to take a few pictures with my storm last night when I was at a party and when I tried to do, I got an error message.

  I can't show you a picture, you cannot add attachments, but the error message reads:

  (letter i icon) File system error

  (the folder icon) / Device memory/home/user/photos

  Name: IMG0007-200... (name of the photo)

  I looked everywhere that I have air...

  I went to the Options... Memory and looked at what I had available. Here's what I found:

  Application memory

  Free space: 9.6 MB

  The device memory

  Total area: 879.2 MB

  Free space: 0.0 KB

  Multimedia card

  Total space: 7.3 GB

  Free space: 5.6 GB

  Of course, the glaring problem is that I don't have ANY free space on the device.  Where everything is?  I have a 8 GB memory card and I have uploaded about 150 songs in my Storm. However, I have not downloaded photos or anything else. What happened to all the memory?   Where everything is?

  I tried a couple things like turn market, pulling out the memory card, etc... I tried to attach the storm and then sneaked in the records themselves and the only things I could find in ALL files was my MP3 files.

  Anyone know what's happened here?

  Thank you!

  Rob

  I just thought the "battery pull" solution, but how do I make my memory card a 'default' location for pix?

  Thank you!

  I will go ahead and try this battery pull and tell you how it goes...

• What version of PDM for PIX 6.3 (4) on a 515E?

  I loaded the last PDM bin 4.1 (1) for PIX os ver 6.3 (4) but I get an error message when I try to access the new PDM:

  "Cisco PDM 4.0 for FWSM does not work on PIX. Please install Cisco PDM 3.0 on your PIX"

  Hmmm a Pix Device Manager which does not work on PIX? The links were wrong on the cisco.com page that pointed me to this location?

  http://www.Cisco.com/cgi-bin/tablebuild.pl/PIX

  Are these compatible versions?

  Here's my version:

  Cisco PIX Firewall Version 6.3 (4)

  Cisco PIX Device Manager Version 4.1 (1)

  Yes, this message is absolutely right, version 4.x PDM is just for the firewall Switch Module and is not supported by the device of PIX. FWSM supports Transparent firewall features that the PIX does not now support.

  Version 3.0.2 PDM.

  There will be a new PDM with the PIX OS 7.0 version in the first quarter of 2005.

  sincerely

  Patrick

• Q for PIX-525 spec (failover FE) and the GBIC

  Qestion for PIX-525 spec.

  1 PIX-525-UR-GE-BUN(2GE + 2FE). I want to use 2GE as inside and outside interface and failover FE. I found a doc who must use the GE model 535 failover. Is it supports statefull failover FE model 525?

  2 PIX-1GE-66 map PIX 525, is the built in card GBIC interface, or do I module GBIC order (ex, WS-G5484) to put into the card?

  Thank you

  1. the restriction on the use of a dynamic rollover interface that corresponds to the fastest interface on the PIX is the PIX 535. The PIX 525 cannot switch the line traffic GE rate if this restriction is lifted on the 525 platform. You can use a link FE on a PIX 525 as the dynamic link even if you have GE links as other interfaces.

  2. the GE on the PIX interface card contains a multimode SC connector. No GBIC not necessary... just of cables.

  I hope this helps.

  Scott

• I worked on a banner for my website.  I have my background layer, my image photo layer and I try to make my text layer.  I'm haven been able to do this all morning.  Now when I select horizontal T, place the cursor and type... I get only one

  I am designing a banner for my website.  I have a background layer, a layer of photo image and I try to create my text layer.  I select horizontal T, place the cursor in the desired position and type.  I get a horizontal line... no letters.  Can someone tell me what is the problem and how to solve this problem, so I can't see letters?  Thank you!

  Right now, your question is marked as "not responded". If my or anyone's answer solved your issue. Mark your question as answered and mark the answer displayed as 'correct', only you can do. It helps when the moderators of the forums of audit.

• How to create a banner for signing email with a hyperlink that I can put on outlook?

  How should I go about creating a banner for an email signature that contains a hyperlink. I need to put this on outlook.

  Thanks for any help

  Design your banner

  Export in PDF format

  Open a PDF file in Photoshop

  Save as JPEG

  Insert a JPEG in your Outlook signature

  Apply the hyperlink in Outlook. A010352514.aspx http://Office.Microsoft.com/en-IE/Outlook-Help/Create-and-Add-an-email-message-signature-H

• cmd key does not not for pix not adjacent selection

  Cmd key doesn't work is not for the nonadjacent selection of pix. Worked in iPhoto, but not since the 1.0.1 Photos.

  It works in other ways as being one by design or just a default keyboard?

• Is it possible to make a banner for my website with Vista paint?

  I try to use Paint to design a banner to go to a site Etsy, I will open. I read in a post that you could make a banner to post but I'm having a very hard time to experiment with it. I just want to know if it is possible. As you proable could say that I am becoming more read and write with my computer and all applications. Please forgive my ignorance. Thank you.

  Not with paint. You need a graphics program to third. Google for creater of banner.

• Backup AAA for PIX

  I have a PIX with the following configuration:

  GANYMEDE + Protocol Ganymede + AAA-server

  AAA-server GANYMEDE + (inside) host 192.168.1.1 77777 timeout 5

  RADIUS Protocol RADIUS AAA server

  AAA-RADIUS (inside) host 192.168.1.1 Server 77777 timeout 10

  AAA-server local LOCAL Protocol

  AAA authentication GANYMEDE serial console +.

  AAA authentication enable console GANYMEDE +.

  order of AAA for authorization GANYMEDE +.

  AAA accounting correspond to aaa_acl inside RADIUS

  Everything works fine when the RADIUS server is available. When he is not available, I can log in with the username "PIX" and "password". The problem is, once I connected, I can't get permission to execute orders. Does anyone know of a command that is similar to the "if-certified" for routers that I can use?

  There is no method of backup for authorization for the PIX. As you know, if the RADIUS server is down, you can connect with "pix" and the password enable, but it doesn't help a permission. The only thing you can do is wait the GANYMEDE server back to the top. I'm sorry.

• AAA for PIX 7.2 (2)

  Hello

  Im having a problem on my PIX 7.2 newly upgraded (2). It seems that my authentication does not work. It maintains authenticate using my local user name not on my ACS. Here is my config

  AAA-sever GANYMEDE + Protocol Ganymede +.

  AAA-server GANYMEDE + (inside) host 172.x.x.x key

  AAA authentication enable console LOCAL + GANYMEDE

  ACS config:

  AAA client: Add IP

  Key to the AAA: even with PIX

  Please help me.

  Thank you

  Jong

  The reason for the authentication of the AAA to failure can be one of the following conditions:

  (1) authentication key shift

  User 2 password incompatibility).

  (3) error in the configuration

  Check if the keys are configured correctly on the device and also, username and passwords.

  For more information, please visit the following url:

  http://www.Cisco.com/en/us/docs/security/PIX/pix72/release/notes/pixrn722.html#wp201347

• Order of operations for PIX

  I intend to migrate from ducts in the ACL, and I'm interested to know the order of operations.

  Lets assume that I have access list on the external interface that allows the packet HTTP & HTTPS to the Web server. However, on the DMZ interface I encouraged only SMTP packets.

  Do I need to allow packets to the Web server on the DMZ interface?

  Can't control the before State of ACL table PIX?

  (Please let me know if there is any document which deals with the order of operations.)

  Thank you.

  I'm a little confused by your example, but I think I know what you're looking for.

  Yes, the PIX search a connection exstablished front of LCD. Therefore, if the package has been allowed in through the ACL on your external interface on a server web DMZ, the answer would automatically be allowed. You must enable explicitly all traffic through the ACL on the interface DMZ that you wanted to come (initiated, this isn't an answer) of the web server on the DMZ. For example, open a web browser on the web server itself should be allowed.

  And ACL have a higher priority than the pipes so mix are not a good idea (just an info).

  Scott

• Boring for pix failover message

  Hello

  >

  > I have two firewalls of PIX525 editing just with dynamic rollover and they

  > sewing to work properly except that I'm getting the message...

  >

  > Warning, lack of ip address or the inside interface failover

  >

  > The inside interface has an ip address and I don't want to use it for

  > failover, so why I get this message?

  >

  > I'm under 6.3.4

  Hello

  When you set up failover, you must assign each ip address, interfacean @,.

  When you assign an ip @ to a failover interface, the pix continues to display decreasing message. It assumes that there is an error.

  If you must give to each interface of your pix failover ip @.

  failover ip inside everything that...

  hope this helps.

• Copy startup-config for pix via TFTP

  Where am I missing it? I know it's possible to copy a config pix down via Tftp using the

  WR net tftpIP: filename

  How can I do the reverse copy, the startup-config for the pix using tftp.

  Easy to do with a router or a switch. I don't see any docs on ORC that specify where to copy the startup-config.

  Hello

  Use the Net Config command

  http://www.Cisco.com/univercd/CC/TD/doc/product/iaabu/PIX/pix_sw/v_63/cmdref/c.htm#wp1055799

  Thank you

  Nadeem

• VPN for PIX 515 allowing access to a single host

  I have already setup on my PIX 515 a VPN connection, which allows the user to connect to our network via a cisco VPN client to access network resources.

  I want to configure now is an another VPN connection that external users can use but would only allow access to a host.

  E.g. I would like to VPN in my site but would be allowed to access the 10.1.1.1 on my network.

  How can I do this? What I have to install VPNGROUP another and somehow an access list to allow only traffic to a host of configuration. Can anyone help with the correct syntax for the PIX.

  Thank you

  Scott

  You will now have a bunch of commands "vpngroup" in your PIX, simply go into config mode and add more commands 'vpngroup' but with a different groupname. The VPN client then uses this group name to connect to the PIX.

  Another way to allow only access to a host for this PIX is to split tunnelling on this group, as well as in the tunnel of split ACL set only as a host.

• DHCP server for pix

  Server DHCP - pix - dhcp clients

  is it possible to have a dhcp server machine to say the inside interface, and dhcp clients are on the dmz?

  Thank you

  a feature named dhcprelay should solve your problem. I did the opposite, i.e. the server dhcp on the outside and the customer inside. However, I guess that the 'dhcprelay' command should do.

  for example

  dhcprelay Server 192.168.2.2 inside

  dhcprelay enable dmz