DHCP server for pix
Server DHCP - pix - dhcp clients
is it possible to have a dhcp server machine to say the inside interface, and dhcp clients are on the dmz?
Thank you
a feature named dhcprelay should solve your problem. I did the opposite, i.e. the server dhcp on the outside and the customer inside. However, I guess that the 'dhcprelay' command should do.
for example
dhcprelay Server 192.168.2.2 inside
dhcprelay enable dmz
Tags: Cisco Security
Similar Questions
-
DHCP server for debugging VPN clients
We are DHCP configuration to a DHCP server for SSLVPN customers on our ASA 8.2 running, and it does not work yet.
I set the DHCP server to the tunnel profile to use, set the scope of the network dhcp for the group - that seems to be all that is needed.
Currently, the problem is I'm having trouble finding debug commands that provide detailed information on what is happening with DHCP queries.
Debug only the DHCP-based controls seem to be:
DHCPC Client DHCP information
DHCPD dhcpd information, and
dhcprelay DHCP Relay informationI ' ve tried the client and relay debugs and I see is that the client is not giving an IP address valid. " 0.0.0.0/0.0.0.0
The DHCP server is not a request from this ASA for the network defined in the dhcp-network for the group scope, and we see nothing on the DHCP server in debugging results.
Any suggestions would be welcome.
Lynne
you will see a button like "marks" as answered
You can also sort the useful answers.
Concerning
Ashish
-
I saw this question posted several times here, but I can't find someone who has exactly the same problem I have.
This problem started a week ago. Basically, my computer loses its connection ethernet once per hour to around the same exact time. which is only for about 5 seconds, but it's enough to get Skype and other things while I'm working, and it's very frustrating because I use Skype to talk with customers, and it looks unprofessional when my calls fall every single time. my computer can also use wireless (which does not go down), but he's too unstable for my work.
now on the error message I posted. I get this error in my observer of events in about 30 minutes until my ethernet goes down, so I don't know if they are interlaced or not, because I don't get any errors when my ethernet really crashes.
Here's what I've tried so far without success:
-temporarily disable the firewall and antivirus
-updated driver for both my wired network cards and wireless (both were UTD)
I don't know what to do because I've never had this problem before.
Here is some information on my computer if that helps all:
OS: windows 7 Home premium (x 64-bit)
computer model: gateway DX4870
Look on the side of the router and make sure that the DHCP lease time has not set to 60 minutes. As a simple solution you can just assign a reserved DHCP or a static address to the computer (in the router).
PS: You'll find the DHCP lease on the map with the command ipconfig/all command at a command prompt
John
-
I know that the PIX can act as a DHCP server, but can he have bookings MAC - IP?
I would like my PIX to issue dhcp for our internal network, but I need to have some reservations for clients.
Hello
This is launched from time to time, but I'm afriad that the answer is always that the PIX cannot make DHCP reservations. The server DHCP PIX feature is supposed to be * very * basic. The idea was really to provide functionality of DHCP server for SOHO environments, where another DHCP server did not exist. I doubt we'll ever add this feature to the PIX since other recommended more comprehensive DHCP servers are available. You can do this with IOS DHCP if there is an option. Sorry for the news, but I hope that this help save you some time research.
Scott
-
Can DHCP server with two scopes - I have reservations in doubles in the two staves?
Hi all
Not really a guru of DHCP, so be nice :)
Currently, we run a DHCP service from one of our domain controllers (win 2008R2). The domain controller is the segment of a network (10.10.120.0/24), the computers making DHCP requests are on a separate network (10.10.103.0/22). We use our ip-helper routers setting to say the devices on the network, how to reach the DHCP server. This has worked well for years. I should also point out it is company policy for PCs/servers have a static IP, so for the PC, we create reservations for each PC. Servers are assigned static mmanually.
The question is now we have overflowed into a new building and put in a black 1 GB fiber that connects the two buildings. The network in the new building is using a different network (10.10.104.0/24) address. Implementation of a 2nd scope on the DHCP server for this address range went well and once the ip-to support additional parameter has been done on the router the PCs in the new building could fine DHCP to the domain controller in the main building. Everything is good.
The question is now, we are moving PC between the two buildings, I was wondering if it is ok to keep the existing reserves for the PC in one scope and have a duplicate for her in the new scope assign the new IP address. Of course, the PC cannot be in two places at once and the DHCP console doesn't; "t seem to complain about the same MAC address used in two staves, but I don't really know whether it is advisable or not. Basically, our operations staff become a little miffed at having to remove a single scope of reservations and recreate them in the 2nd scope when the PC to move between buildings.
So the questions is safe / advisable to do it or not?
Kind regards
Craig
Support is located in the Windows Server Forums:
http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/ -
WLC 5508 internal DHCP server issues
Hello
I'm hoping to get your comments around the issues of dhcp, I faced with two centrally switched Wireless LAN. I have attempted to explain the installation and the problems below and would be grateful if anyone can suggest a solution for the problems I am facing:
The configuration is the following:
-J' have a WLC 5508, which has been configured with 4 SSID, of which 2 are the Central authentication and commissioning.
-J' have a LWAP connected to the WLC in HREAP mode.
-WLC is configured as a DHCP server for clients that connect to the SSID "Guest." For the rest, I'm on external dhcp server.
-Only one scope of comments Interface is configured on the WLC.Problems:
1. as far as I know, to WLC serve internal dhcp server, it is mandatory to have the proxy enabled, but the Clients connecting to 'Internet' SSID are
Unable to get an external dhcp server ip address, if the proxy dhcp is enabled on the WLC. If I disable the proxy, everything works fine.
2 DHCP does not release the ip addresses assigned to clients, even after that that they are connected.
3. If a machine that has previously been connected to "Guest" SSID connects to the 'Internet' SSID, he asks the same ip address, he was charged by the WLC assigned under "Guest", it gets the tag with the Vlan configured on the management interface.
The controller output *.
(Cisco Controller) > show sysinfo
Name of the manufacturer... Cisco Systems Inc..
Product name... Cisco controller
Version of the product... 7.0.116.0
Bootloader Version... 1.0.1
Retrieving Image Version field... 6.0.182.0
Firmware version... Console USB 1.3, 1.6 Env FPGA, 1.27
Build Type....................................... DATA + WPS, LDPE(Cisco Controller) > show interface summary
Name interface Vlan Id IP port address Type Ap Mgr. Gu
EST
-------------------------------- ---- -------- --------------- ------- ------ --
1 301 10.255.255.30 dynamic guest no no
Management 1 100 172.17.1.30 static yes noservice-port s/o s/o 192.168.0.1 static no no
n/a n/a 10.0.0.1 no nonstatic virtual(Cisco Controller) > show wlan summary
Number of wireless LANs... 4
Profile WIFI WLAN ID name / name of the SSID status Interface
------- ------------------------------------- -------- --------------------
1 active LAN management
2 active Internet management
3 active active management management
4 comments comments enabled(Cisco Controller) > show dhcp detailed comments
Scope: comments
Enabled.......................................... Yes
Lease Time....................................... 86400 (1 day)
Pool Start....................................... 10.255.255.31
Pool End......................................... 10.255.255.254
Network.......................................... 10.255.255.0
Netmask.......................................... 255.255.255.0
Default routers... 10.255.255.1 0.0.0.0 0.0.0.0
DNS Domain.......................................
DNS.............................................. 8.8.8.8 8.8.4.4 0.0.0.0
NetBIOS name servers... 0.0.0.0 0.0.0.0 0.0.0.0(Cisco Controller) > show detailed interface management
... Management interface
MAC address... e8:b7:48:9 b: 84:20
IP Address....................................... 172.17.1.30
IP Netmask....................................... 255.255.255.0
IP Gateway....................................... 172.17.1.1
State IP NAT outside... People with disabilities
External IP NAT... 0.0.0.0
VLAN............................................. 100
Quarantine-vlan... 0
Active physical Port... 1
The primary physical Port... 1
Port of physical backup... Not configured
Primary DHCP server... 172.30.50.1
Secondary DHCP server... Not configured
Option DHCP 82... People with disabilities
ACL.............................................. Not configured
AP Manager....................................... Yes
Comments interface... NO.
L2 multicast... Activated(Cisco Controller) > show detailed comments from interface
Interface name... Comments
MAC address... e8:b7:48:9 b: 84:24
IP Address....................................... 10.255.255.30
IP Netmask....................................... 255.255.255.0
IP Gateway....................................... 10.255.255.1
State IP NAT outside... People with disabilities
External IP NAT... 0.0.0.0
VLAN............................................. 301
Quarantine-vlan... 0
Active physical Port... 1
The primary physical Port... 1
Port of physical backup... Not configured
Primary DHCP server... Not configured
Secondary DHCP server... Not configured
Option DHCP 82... People with disabilities
ACL.............................................. Not configured
AP Manager....................................... NO.
Comments interface... NO.
L2 multicast... Activated(Cisco Controller) > show dhcp leases
IP MAC remaining rental period
00:21: 6a: 9 c: 03:04 10.255.255.46 23 hours, 52 minutes, 42 seconds< lease="" remains="" even="" when="" the="" client="" is="">Example of customer connected to the Vlan right with an ip address from the incorrect interface. *************
(Cisco Controller) > show customer detail 00:21: 6a: 9 c: 03:04
MAC address of the client... 00:21: 6a: 9 c: 03:04
User name of the client... N/A
AP MAC address... a0:cf:5 b: 00:49:c0
AP Name.......................................... mel
Status of the client... Associates
Customer of the NAC OOB State... Access
Wireless LAN Id... 2< 'internet'=""> >
BSSID... a0:cf:5 b: 00:49: this
Connected to... dry 319
Channel.......................................... 36
IP Address....................................... 10.255.255.46< ip="" address="" assigned="" from="" the="" 'guest'="" interface="" or="" dhcp="" scope="" on="" the="">
Association ID... 1
Authentication algorithm... Open System
Reason code... 1
Status code... 0
Session timeout... 1800
Client CCX version... 4
Version of E2E customer... 1
QoS Level........................................ Silver
Beacon priority P 802,1... disabled
Support WMM... Activated
Power Save....................................... OFF
State of mobility... Local
County of movement mobility... 0
Complete security policy... Yes
State Policy Manager... RUN
Policy Manager rule created... Yes
ACL name... no
Status to apply ACL... Not available
Type of strategy... N/A
Encryption Cipher... None
Protection management framework... NO.
EAP Type......................................... Unknown
Data HARVEST-H switching... Central
H - HARVEST authentication... Central
Management of the interface...
VLAN............................................. 100< right="">
Quarantine VLAN... 0
Access VIRTUAL LAN... 100Well it's good news. At least you have to operate.
Thank you
Scott Fella
Sent from my iPhone
-
Hello
is it possible for the SF/SG300 switches serve as a DHCP server for the VLAN-s employees.
Switch a VLAN1 as management VLAN - has assigned IP address.
The switch has VLAN extra - VLAN200 and I would like SG300 act as a DHCP server for the clients on this VLAN.
Is this possible at all?
Hi Jeremy, the switch must operate in layer 3. You can enable the dhcp server by vlan.
To be eligible to do a DHCP pool for a vlan level 3, none of the interface vlan can have an IP address issued via DHCP, so you vlan 1 and 200 must have a static ip address assigned. The vlan 1 requires no dhcp server configured for vlan 200 to have a.
Here is an example of configuration
config t
database of VLAN
VLAN 200
output
interface vlan 1
IP 192.168.100.137 255.255.255.0
no ip address dhcp
output
interface vlan 200
192.168.99.1 IP address 255.255.255.0
output
The dhcp server IP
network IP dhcp pool test
address 192.168.99.1 low high 192.168.99.254 255.255.255.0
router by default - 192.168.99.1
Server DNS 8.8.8.8
-Tom
Please mark replied messages useful -
The dhcp server has not seen a directory for authorization server
I recently upgraded from Server 2003 to windows server 2008 r2. After the upgrade, the DHCP server has started to not giving IP address after a lease has expired. For DHCP to provide IP addresses, I have to restart the server. I need help on how to configure my server to allow the service to restart. Any help will be much appreciated
This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)* -
Need a server DHCP/BOOTP for Windows7 for several stage boot program
Is there a DHCP/BOOTP for Windows7 server program that can handle a multi-etape boot? Must be able to respond to a BOOTP request with a path of the boot (DHCP Option 67) file based on the class identifier of the seller (Option DHCP 60). It would serve as a sequence of image files to an ARM Cortex-A8 Processor device
(MLO, u-Boot, Linux kernel image).
Hi Mike,.
Welcome to the Microsoft community where you can find all the answers related to Windows!
According to the description, looks like you want to know if the DHCP server to Windows 7 has some capabilities.
I suggest you post this question in this forum to improve assistance:
http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer
Hope this information helps. Respond us if you have any questions with windows and we will be happy to help.
-
Original title: dhcp/tftp boot file name based on vendor-class-identifier.
I'm trying to start a Texas Instruments AM335x Evaluation Committee using the Windows 7 USB RNDIS driver.
AM335x is an ARM Cortex-A8 microprocessor.
I need a DHCP/BOOTP/TFTP server which is able to select the startup file to send via TFTP, based on the identifier of the provider class.
I have this working on the host Linux-Ubuntu 10.04 LTS. 'dhcpd' is the DHCP server. dhcpd is able to select the image file
based on the received BOOTP message. For this ARM system, it serves a sequence of image files: submarine - spl.bin (secondary program loader)
then u - boot.img (bootloader) and finally uImage (Linux kernel). The dhcpd.conf configuration file contains the following code:
If substring (option vendor-class-identify, 0, 10) = "AM335x ROM"
{
file name "u-boot - spl.bin";
}
elsif substring (option vendor-class-identify, 0, 17) = 'AM335x submarine SPL.
{
file name "u - boot.img".
}
on the other
{
file name "uImage";
}
Thus, the dhcpd Linux BOOTP server is able to select the correct to send from the Linux host via TFTP image file.
based on the content of the message BOOTP ('ROM AM335x', "AM335x submarine SPL" or neither of those two.)
Y at - it for Windows 7 Microsoft DHCP server that has this capability?
If this isn't the case, you know a server program DHCP/BOOTP/TFTP for Windows 7 that has this capability?
Could do you using netsh?
Thank you for your attention,
Michael Tadyshak
Texas Instruments
Hi Michael,
Welcome to the Microsoft community where you can find all the answers related to windows!
According to the description, looks like you want to know if the DHCP server to Windows 7 has some capabilities.
I suggest you post this question in this forum to improve assistance:
http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer
Hope this information helps. Respond us if you have any questions with windows and we will be happy to help.
-
PIX as a NTP server for inside networks
I currently have my PIX receiving NTP of a trusted external source. I would put my switches to pick up their time to the PIX. I don't see anywhere that it is possible. I have tried using my interior of interface as the source server for the customers, but they never receive NTP messages and remain unsynchronized.
Our PIX is the internal common points for each of our offices (they create our web of connections Internet VPN tunnels) and are the logical choice for traffic NTP ditribute throughout our org.
Can someone answer for sure that PIX will act as NTP servers when it is called by clients configured for example:
Insside source NTP server (PIX1_IP)
This works when PIX1_IP is actually all other(non-PIX) NTP internal source.
For security reasons, the PIX is only an NTP client. Is not a NTP server and response to queries from the NTP clients. PIX does not meet the NTP queries. If you enable logging on the PIX you can see a syslog message
% 3 PIX-610001: int_name of interface for the NTP daemon: package refused to
IP_addr
OR similar.
Hope that helps!
-
Remote access VPN with ASA 5510 by using the DHCP server
Hello
Can someone please share your knowledge to help me find out why I'm not able to receive an IP address on the remote access VPN connection so that I can get an IP local pool DHCP?
I'm trying to set up remote access VPN with ASA 5510. It works with dhcp local pool but does not seem to work when I tried to use an existing DHCP server. It is tested in an internal network as follows:
!
ASA Version 8.2 (5)
!
interface Ethernet0/1
nameif inside
security-level 100
IP 10.6.0.12 255.255.254.0
!
IP local pool testpool 10.6.240.150 - 10.6.240.159 a mask of 255.255.248.0. (worked with it)
!
Route inside 0.0.0.0 0.0.0.0 10.6.0.1 1
!
Crypto ipsec transform-set esp-3des esp-md5-hmac FirstSet
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
Crypto-map dynamic dyn1 1jeu transform-set FirstSet
dynamic mymap 1 dyn1 ipsec-isakmp crypto map
mymap map crypto inside interface
crypto ISAKMP allow inside
crypto ISAKMP policy 1
preshared authentication
3des encryption
sha hash
Group 2
life 43200
!
VPN-addr-assign aaa
VPN-addr-assign dhcp
!
internal group testgroup strategy
testgroup group policy attributes
DHCP-network-scope 10.6.192.1
enable IPSec-udp
IPSec-udp-port 10000
!
username testlay password * encrypted
!
tunnel-group testgroup type remote access
tunnel-group testgroup General attributes
strategy-group-by default testgroup
DHCP-server 10.6.20.3
testgroup group tunnel ipsec-attributes
pre-shared key *.
!
I got following output when I test connect to the ASA with Cisco VPN client 5.0
Jan 16 15:39:21 [IKEv1]: IP = 10.15.200.108, IKE_DECODE RECEIPT Message (msgid = 0) with payloads: (4) SA (1) + KE + NUNCIO (10) + ID (5), HDR + VENDO
4024 bytesR copied in 3,41 0 seconds (1341 by(tes/sec) 13) of the SELLER (13) seller (13) + the SELLER (13), as well as the SELLER (13) ++ (0) NONE total length: 853
Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, SA payload processing
Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, processing ke payload
Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, payload processing ISA_KE
Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, nonce payload processing
Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, payload processing ID
Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, payload processing VID
Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, received xauth V6 VID
Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, payload processing VID
Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, DPD received VID
Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, payload processing VID
Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, received Fragmentation VID
Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, IKE Peer included IKE fragmentation capability flags: Main Mode: real aggressive Mode: false
Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, payload processing VID
Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, received NAT-Traversal worm 02 VID
Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, payload processing VID
Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, the customer has received Cisco Unity VID
Jan 16 15:39:21 [IKEv1]: IP = 10.15.200.108, connection landed on tunnel_group testgroup
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, IKE SA payload processing
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, IKE SA proposal # 1, turn # 9 entry overall IKE acceptable matches # 1
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, build the payloads of ISAKMP security
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, building ke payload
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, building nonce payload
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, Generating keys for answering machine...
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, construction of payload ID
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, build payloads of hash
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, calculation of hash for ISAKMP
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, build payloads of Cisco Unity VID
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, constructing payload V6 VID xauth
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, building dpd vid payload
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, constructing the payload of the NAT-Traversal VID ver 02
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, NAT-discovery payload construction
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, calculation of hash discovered NAT
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, NAT-discovery payload construction
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, calculation of hash discovered NAT
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, construction of Fragmentation VID + load useful functionality
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, build payloads VID
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, send Altiga/Cisco VPN3000/Cisco ASA GW VID
Jan 16 15:39:21 [IKEv1]: IP = 10.15.200.108, IKE_DECODE SEND Message (msgid = 0) with payloads: HDR SA (1) KE (4) NUNCIO (10) + ID (5) + HASH (8) + SELLER (13) + the SELLER (13) + the SELLER (13) + the SELLER (13) NAT - D (130) + NAT - D (130) of the SELLER (13) + the seller (13) + NONE (0) total length: 440
Jan 16 15:39:21 [IKEv1]: IP = 10.15.200.108, IKE_DECODE RECEIPT Message (msgid = 0) with payloads: HDR + HASH (8) + NOTIFY (11) + NAT - D (130) + NAT - D (130) of the SELLER (13) + the seller (13) + NONE (0) overall length: 168
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, processing hash payload
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, calculation of hash for ISAKMP
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, processing notify payload
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, payload NAT-discovery of treatment
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, calculation of hash discovered NAT
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, payload NAT-discovery of treatment
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, calculation of hash discovered NAT
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, payload processing VID
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, useful treatment IOS/PIX Vendor ID (version: 1.0.0 capabilities: 00000408)
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, payload processing VID
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, the customer has received Cisco Unity VID
Jan 16 15:39:21 [IKEv1]: Group = testgroup, I
[OK]
KenS-mgmt-012 # P = 10.15.200.108, status of automatic NAT detection: remote end is NOT behind a NAT device this end is NOT behind a NAT device
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, empty building hash payload
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, build payloads of hash qm
Jan 16 15:39:21 [IKEv1]: IP = 10.15.200.108, IKE_DECODE SEND Message (msgid = d4ca48e4) with payloads: HDR + HASH (8) + ATTR (14) + (0) NONE total length: 72
Jan 16 15:39:26 [IKEv1]: IP = 10.15.200.108, IKE_DECODE RECEIPT Message (msgid = d4ca48e4) with payloads: HDR + HASH (8) + ATTR (14) + (0) NONE total length: 87
Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, process_attr(): enter!
Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, transformation MODE_CFG response attributes.
Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKEGetUserAttributes: primary DNS = authorized
Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKEGetUserAttributes: secondary DNS = authorized
Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKEGetUserAttributes: = authorized primary WINS
Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKEGetUserAttributes: = authorized secondary WINS
Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKEGetUserAttributes: Compression IP = disabled
Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKEGetUserAttributes: Split Tunneling political = disabled
Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKEGetUserAttributes: setting Proxy browser = no - modify
Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKEGetUserAttributes: browser Local Proxy bypass = disable
Jan 16 15:39:26 [IKEv1]: Group = testgroup, Username = testlay, IP = 10.15.200.108, (testlay) the authenticated user.
Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, empty building hash payload
Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, build payloads of hash qm
Jan 16 15:39:26 [IKEv1]: IP = 10.15.200.108, IKE_DECODE SEND Message (msgid = 6b1b471) with payloads: HDR + HASH (8) + ATTR (14) + (0) NONE total length: 64
Jan 16 15:39:26 [IKEv1]: IP = 10.15.200.108, IKE_DECODE RECEIPT Message (msgid = 6b1b471) with payloads: HDR + HASH (8) + ATTR (14) + NONE (0) overall length: 60
Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, process_attr(): enter!
Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, cfg ACK processing attributes
Jan 16 15:39:27 [IKEv1]: IP = 10.15.200.108, IKE_DECODE RECEIPT Message (msgid = 49ae1bb8) with payloads: HDR + HASH (8) + ATTR (14) + (0) NONE total length: 182
Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, process_attr(): enter!
Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, treatment cfg request attributes
Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for the IPV4 address!
Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for the IPV4 network mask!
Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for DNS server address.
Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for the address of the WINS server.
Jan 16 15:39:27 [IKEv1]: Group = testgroup, Username = testlay, IP = 10.15.200.108, transaction mode attribute unhandled received: 5
Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for the banner!
Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for setting save PW!
Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: receipt of request for default domain name!
Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for Split-Tunnel list!
Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for split DNS!
Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for PFS setting!
Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for the Proxy Client browser setting!
Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for the list of backup peer ip - sec!
Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for setting disconnect from the Client Smartcard Removal!
Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for the Version of the Application.
Jan 16 15:39:27 [IKEv1]: Group = testgroup, Username = testlay, IP = 10.15.200.108, Type of Client: Windows NT Client Application Version: 5.0.07.0440
Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for FWTYPE!
Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: request received for the DHCP for DDNS hostname is: DEC20128!
Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for the UDP Port!
Jan 16 15:39:32 [IKEv1]: Group = testgroup, Username = testlay, IP = 10.15.200.108, in double Phase 2 detected packets. No last packet retransmit.
Jan 16 15:39:37 [IKEv1]: IP = 10.15.200.108, IKE_DECODE RECEIPT Message (msgid = b04e830f) with payloads: HDR + HASH (8) + NOTIFY (11) + (0) NONE total length: 84
Jan 16 15:39:37 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, processing hash payload
Jan 16 15:39:37 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, processing notify payload
Jan 16 15:39:37 [IKEv1]: Group = testgroup, Username = testlay, IP = 10.15.200.108, in double Phase 2 detected packets. No last packet retransmit.
Jan 16 15:39:39 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKE has received the response from type [] at the request of the utility of IP address
Jan 16 15:39:39 [IKEv1]: Group = testgroup, Username = testlay, IP = 10.15.200.108, cannot get an IP address for the remote peer
Jan 16 15:39:39 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, case of mistaken IKE TM V6 WSF (struct & 0xd8030048)
, : TM_DONE, EV_ERROR--> TM_BLD_REPLY, EV_IP_FAIL--> TM_BLD_REPLY NullEvent--> TM_BLD_REPLY, EV_GET_IP--> TM_BLD_REPLY, EV_NEED_IP--> TM_WAIT_REQ, EV_PROC_MSG--> TM_WAIT_REQ, EV_HASH_OK--> TM_WAIT_REQ, NullEvent Jan 16 15:39:39 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, case of mistaken IKE AM Responder WSF (struct & 0xd82b6740)
, : AM_DONE, EV_ERROR--> AM_TM_INIT_MODECFG_V6H, EV_TM_FAIL--> AM_TM_INIT_MODECFG_V6H NullEvent--> AM_TM_INIT_MODECFG, EV_WAIT--> AM_TM_INIT_XAUTH_V6H, EV_CHECK_QM_MSG--> AM_TM_INIT_XAUTH_V6H, EV_TM_XAUTH_OK--> AM_TM_INIT_XAUTH_V6H NullEvent--> AM_TM_INIT_XAUTH_V6H, EV_ACTIVATE_NEW_SA Jan 16 15:39:39 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKE SA AM:bd3a9a4b ending: 0x0945c001, refcnt flags 0, tuncnt 0
Jan 16 15:39:39 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, sending clear/delete with the message of reason
Jan 16 15:39:39 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, empty building hash payload
Jan 16 15:39:39 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, constructing the payload to delete IKE
Jan 16 15:39:39 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, build payloads of hash qm
Jan 16 15:39:39 [IKEv1]: IP = 10.15.200.108, IKE_DECODE SEND Message (msgid = 9de30522) with payloads: HDR HASH (8) + DELETE (12) + (0) NONE total length: 80
Kind regards
Lay
For the RADIUS, you need a definition of server-aaa:
Protocol AAA - NPS RADIUS server RADIUS
AAA-server RADIUS NPS (inside) host 10.10.18.12
key *.
authentication port 1812
accounting-port 1813
and tell your tunnel-group for this server:
General-attributes of VPN Tunnel-group
Group-NPS LOCAL RADIUS authentication server
--
Don't stop once you have upgraded your network! Improve the world by lending money to low-income workers:
http://www.Kiva.org/invitedBy/karsteni -
Satellite Pro C650 can't find our DHCP server
Hello
We just recived 8 new Satellite Pro C650 and care about their image.
When connect us to our network via a cable and boot on LAN of the laptop can not find our DHCP server and so of does not obtain an IP address.If we connect to an another laptop\workstation in the same Manor, it works very well.
All the settings are correct in the BIOS.
Any ideas.
Hello
First of all, you should check if the settings of TCP/IP to connect to the local network.
Network-> properties-> LAN (local area) connections-> TCP/IP-> propertiesHere, you should check if the options for the IP address, DNS are set to obtain automatically.
In the advanced settings of TCP/IP in IP settings tab active DHCP must be visible.In addition, please check if all firewalls do not prevent the laptop to connect to the local network.
-
Keep the IP if the DHCP server is offline now
We have a customer who wants to be able to manage the IP addresses of all devices with DHCP, but the devices are supposed to keep their IP forever after the DHCP server has been taken offline. Is this a behavior that we can support on a controller of NOR?
If this is not a configurable behavior an alternative could be to have controlelr auto configure to the last known IP if no such is acquired... but the VI apply network settings doesn't seem to work if done on the controller itself. Is this correct?
With NEITHER in Norway (thanks), I found a solution which allows us to implement the required behavior.
The main problem for us once we need to override the default behavior for DHCP was the fact that the RT apply target Network Settings.vi does not work if it is set to target the same controller as it is running. So how to exchange between DHCP and fixed? Well, it turns out that the network settings are also stored in the file of ni - rt.ini. So here's what we do: when the controller starts, we check if it is running in DHCP mode. If this isn't the case, we change this in the file nor - rt.ini and the reset - to see if the DHCP server is operational. If the controller is running in DHCP, we check if the IP address is valid (i.e. outside the local range of link). If it isn't read us the last known IP address and write those set in the file nor - rt.ini and restart.
An example of the sections of the INI file:
For DHCP, the section of the nor - rt.ini will look like this:
[TCP_Stack_Config]
USE_DHCP = DNS_Address
Gateway USE_DHCP =
USE_DHCP = Ip_address
USE_DHCP = Masque_sous
For a static IP address:
[TCP_Stack_Config]
DNS_Address = 0.0.0.0
Gateway = 10.0.18.1
Ip_address = 10.0.18.13
Masque_sous = 255.255.255.128
It would be nicer than the network RT target apply Settings.vi would work for auto-reconfiguration, but it saved the day for us at least in this case.
-
Hello world.
I am new to Windows Server. I'm setting up a server to connect thin clients and use it only as an internet point.
Server roles installed: SC AD, AD DS, AD FS and AD LDS, AD RMS, App Server, DHCP, DNS, file storage Services, Hyper-V, IIS, IPAM, NAP, remote access, Remote Desktop Services. GOING to Services, WDS, Windows Server Essentials experience, WSUS Server Local, all servers.
My problem is that DHCP does not dynamically IP addresses in the clients. In trying to check the DHCP problem, I used followed enough of ipconfig ipconfig / renew and got the error message "an error has occurred during the renewal of the vEthernet of the virtual interface (my static IP port): unable to contact your DHCP server. I even removed then added the DHCP function and no change.
What I am doing wrong? Help, please!
Other tips on this deployment will be welcome, because I'm out of my League here and have no money to wait for him.
PS. I downloaded and installed SELFSSL for safety certification, as is (without modification).
Hello
Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.
http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer
See you soon.
Maybe you are looking for
-
How can I restart encryption when it is interrupted?
I've been encrypt my drive for four days on Sunday. nothing id finish so restarts the Mac to move things. After I restarted "encryption paused" appears. How can I turn again?
-
When I try to update my maps in GARMIN access is denied to a required site. I can't update access cards
-
Something wrong with my HP laptop keyboard. When I want to type in a s, he returned in place of the ctrl + s and don't did me not s. When I want to type a capital letter and hold the SHIFT key shift, tap an x instead. What should I do?
-
Can I use a group generator camping in Qosmio F60
I go to this site and need to know if I can use a generator to power my laptop
-
Deleting CAB files to save space
Is it safe to remove the CAB of my repertoire to C:\MSOCache\All Users files?