Bar light in walkman

Similar Questions

• On the start with progress bar page, after that it becomes a little more than half, the computer turns off.

  MY MacBook Pro is frozen and I had to turn off get out of the frozen page and when I pressed the button to turn it on it makes the departure noise and then the progress bar lights. When it becomes a little to Midway, the screen goes black and the computer turns off.

  The progress bar that starts from the left end appears when your startup disk is too damaged to mount. The illustrious progress is the functioning of the equivalent of disk utility (ERD). He is never more than half before taking a decision.

  If your drive CAN be mounted, start-up continues normally.

  If your drive cannot be mounted, your Mac stops, because there is nothing productive that it can do.

  If your Mac is trying to start and crashes, which can produce always different results, but that doesn't seem to be the case here.

  I recommend that you start in recovery and run utility disk (ERD) until it comes clean or is hopelessly.

• Color of bar blackBerry Q10 action

  I installed the new OS 10.3.1.1565 on my Q1o and I love the action style bars light is their anyway I can get the dark 10.2 action bar back style that was used all the time even though it was dark or light on the theme

  No, it is not available. It was 10.2, 10.3.

• Sony Sound bar question

  I just bought a bar of his Sony CT 370 that I have a TV sony xbr 65 810c if I want to have my sound bar lights up when I turn on my TV what should I do?

  Hi mars1954,

  Please use HDMI connection.

  Make sure that "Control for HDMI" is set on IT.

  Thank you

  > Joffrey

  If my post answered your question, please mark it as "accept as a Solution.

• See more Visual sound volume bar on the screen. Can anyone help

  I have no luck at all with the sound bar, light bar, etc... Everything works fine, but the Visual bar does not appear.

  I installed the Manager of power supply but no luck!  Behold, I installed the drivers have been downloaded from this page: http://www-307.ibm.com/pc/support/site.wss/WIN7-BETA.html#tpmd

  (1) power manager http://download.lenovo.com/ibmdl/pub/pc/pccbbs/thinkvantage_en/6ju410ww.zip

  (2) Thinkpad Power Management http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/6hku06ww.zip

  My system: windows 7, levono T60p

  Help, please.

  subject published

  It worked. Thank you very much!

• Code of scroll bar to include to change the opacity of a graph

  Hi all

  I'm not a person real actionscipt I usually only code simple and similar buttons.

  I have a scroll bar that I caught on a resource site. (code below)

  I want it so that everytime I put the cursor on the scollbar to move that graphic information under the scroll bar lights (reveal or opacity to 100%). At the moment the small thumbnails under the scroll bar are on all the little time and space of a distraction (they are intended to facilitate the use of the scroll bar in reducing to a minimum the behavior research).

  Please take a look at the presentation to

  http://www.physclips.UNSW.edu.au/waves-sound/oscillations/

  to see what I mean.

  Thanks a lot to all those who answer.

  this.createEmptyMovieClip ("progFrame", _root.getNextHighestDepth ());
  progFrame.onEnterFrame = progStatus;
  progBar.scrubber.onPress = function () {}
  progFrame.onEnterFrame = scrubProg;
  this.startDrag(false,0,this._y,500,this._y);
  }
  progBar.scrubber.onRelease = progBar.scrubber.onReleaseOutside = function () {}
  progFrame.onEnterFrame = progStatus;
  _root.section1_mc. Play();
  this.stopDrag ();
  }

  
  function progStatus() {}
  amountPlayed = (_root.section1_mc._currentframe / _root.section1_mc._totalframes);
  progBar.playedBar._width = (Math.round(amountPlayed * 500));
  progBar.scrubber._x = (Math.round(amountPlayed*500));
  }

  function scrubProg () {}
  _root.section1_mc. Stop();
  _root.section1_mc.gotoAndStop(math.floor((progBar.scrubber._x/500) * (_root.section1_mc._totalframes)));
  progBar.playedBar._width = progBar.scrubber._x;
  }

  Ok.

  the trawler has probably already defined delivery function.  search for a method startDrag() and you may find that in the dragger.onPress function.  Add the following to this delivery:

  This.thumbnails_mc._visible = true;

  then in onRelease of the dredger to add it:

  This.thumbnails_mc._visible = false;

  In addition, by default at the start of your application you want to add:

  This.thumbnails_mc._visible = false;

• Safari 9.1.2 keeps log me out of all my accounts

  Safari 9.1.2 guard connect automatically on all my accounts (Google, Facebook, emails etc.) every two minutes. Is it possible to fix this please? I tried researching it and discovered there was a similar problem with Safari, a couple of years ago, but I have not found a solution. Help, please. It's extremely frustrating!

  Is your search Safari bar light grey or dark grey? If it's dark, it's set to private browsing. I kept is disconnected from websites as well, until I discovered that my Safari was in private by default mode. The turn off correction of the problem.

  To check, go to:

  Safari > Preferences > General > Safari opens with: > if it says 'A new private window', change it in a new window in the menu drop-down

  After changing, Safari closes completely and reopen it.

  If this isn't your problem, so hopefully someone more knowledgeable will advise you.

• Pavilion 15-n019wm: no sound on hp Pavilion 15-n019wm

  Since Friday, I have no sound on my laptop, no internal speakers or the headphone jack and the led of the button mute does not work, but if I hit the mute button, the symbol will appear on the "speaker" icon, and it disappears if I hit him again. I did tests and bars light up as if his fate, but there is no sound at all.  I uninstalled the AMD and the Realtek, reinstalled the drivers updated, reset my laptop, replaced the keyboard and changed the setting in the bios so that the 'FN' key should be used for the functions of the keys F1 to F12.  I had updated for Windows 10 well over a month, and everything was working well.  When the sound did not return after the reset, I wiped the hard drive and reinstalled Windows 7 (64-bit) and still no sound.  The led for wifi, the power button and everything is operational, except for the sound.  I'm about to try an update Windows 10 again, but at this point, I am not very optimistic.  Any contributions to this issue would be greatly appreciated!  Thank you!!!

  PS This is the Pavilion 15-n019wm with Windows 7 (64-bit).

  Hello @callykat20,

  Welcome to the Forums of HP Support! It's a good place to find the help you need, so many other users, the HP experts and other members of the support staff.

  I read your post about the noise and wanted to help you!

  You can try to review the following document, just to see if there was anything, you missed it:

  HP laptops - no sound from speakers (Windows 7)

  However, if you formatted the hard drive and still has the issue.  Then, it seems that the drivers are not the cause.  You can contact the HP support by phone for additional options.  Please use the following http://www.hp.com/contacthp and create a folder for your question and contact HP. If you do not live in the United States / Canada, please click on the link below to get contact information for your region.
  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  Please let me know if this information has been helpful by clicking the thumbs up below.  If this post has solved your problem, then please click accept as a Solution.

  Have a great day!

• Synchronize with the icon library

  I'm trying to use this feature of LV9 icon editor; the download seems to work (progress bar lights), but then I get this error to decompress:

  Error 42 occurred at NI_Unzip.lvlib: Open unzip File.vi

  Possible reasons:

  Error opening the zip file.

  «"" "String of full appeal:»»"»
  NI_Unzip.lvlib: Open unzip File.vi
  NI_Unzip.lvlib:unzip.VI
  Download iconlibrary files.vi
  NI.com_iconlibrary.VI

  I applied the patch in http://decibel.ni.com/content/docs/DOC-6301 , but it did not help.

  Can I manually unzip the library? but where?

  you are actually right.

  That's what I did to add an icon I created myself with Windows Paint:

  go to Icon Editor in LabVIEW and click on tools--> list of glyphs and the models of the icon.

  After clicking on this menu, a web page opens.

  In this web page are listed all the icons present on your PC with their absolute path.

  In my case (Windows XP), the icons are found in these paths:

  C:\Documents and Settings\WINDOWS_USERNAME\My Documents\LabVIEW Data\Glyphs\...

  C:\Documents and Settings\WINDOWS_USERNAME\My Documents\LabVIEW Data\Icon Templates\

  where WINDOWS_USERNAME is my Windows account name.

  I then copied the. PNG created with Windows Paint in one of this subfolder in the folder... \Glyphs\.

  Loading the editor icons once again, I was able to find the icon created.

  now, if you put the download of files on our website in that directory, you should be able to find them in the Icon Editor.

  Let me know if it works for you.

  Best regards

• Vista dies whenever an update is made.

  I have a dell xps m1330 laptop computer. It's a gift of second hand from a friend. It came with vista Basic installed.

  The laptop does not start upward, unless the version of vista that came on the DVD is installed. No updates made no entry. If I install the new updates from windows update, or the most recent nvidia graphics driver it ' l work fine until I have shut down and restart. I will never start again. The windows loading bar lights for exactly 1 second, then freezes, then flashes a blue screen for a micro second, then there is nothing but a black screen, then it stops and restarts, and the screen "windows did not close properly" comes up. It is then a continuous cycle.

  I thought it could have been a bad installation. So I reinstalled, vista basic several times but it still happens. Then I thought to corrupt on the DVD data, so I took my PC vista Home premium DVD and installed on the laptop to test if it works and it does exactly the same thing. I thought he might have the overwhelming driver nvidia graphics boot deals, so after a clean install of vista family premium, I downloaded only the components of windows vista from microsoft update. The problem was still there. Then, after a clean install last I downloaded only the nvidia driver and the problem has always existed.

  Doesn't matter what major piece of software, download, windows, or otherwise my computer starts up every time after that it is closed. Blue screens and then dies.

  The only way to get it working again is to insert and run a vista dvd.

  Help, please. Thank you.

  [Duplicate of http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/a3012053-6517-4471-b769-125790048bca]

• Windows could not start error 1068: dependency or group was able to start the automatic configuration of WLAN set the local computer.

  I am not able to start some services to get connected wireless.  In Device Manager the poster adapter works correctly.  The WIFI light is on.  Start Windows Wireless Service bar lights up, but the service does not just start.  I have run chkdsk and several other parts but registry cleaners I keep coming up empty.  Help, please.

  I've been sarching for hours and hours... and it's already after hours of working offline with the client in their home... no restoration of the system or the backups... typical noob... but not their fault it happened... I did EVERYTHING suggested. Nothing has worked... Almost abandoned and prepared for a re - install... then I found it at the last second...

  «OMG 911techmedics...» You're crazy GENIUS!

  Finally, something works and does not require a complete reinstall of the OS. I was so scared of it because Asus does not save a physical copy of the Recovery Manager on the hard drive, and somehow my backup discs (6 disks, waste of my DVD: O) don't work at all after spending an hour by burning.

  What happened was I used RegTweaker to do a cleaning of registry on my Win7, my computer worked faster, but I lost my WLan service and no matter what I was doing nothing worked, until I stumbled upon your post! I have read more than 50 pages of Web/forum sites and tried probably suggested and none of them worked.

  I tried:

  (1) Microsoft Winsock32 Fix
  (2) replacing Winsock dll
  (3) Yes Netsh wlan with the set command
  (4) order of Netsh reset catalog
  (5) LSP Fix.exe
  (6) right click 'Manage' on computer and everything related to the WLAN + dependencies on "automatic".

  I spent 8 hours and none of the above worked. Apparently a lot of people have the same problem after using a registry cleaner. He has tried, tested and proven. I did the registry cleaning on 2 computers and next thing I know on reboot, it is that the WLAN Service went AWOL. My first suspicion is gone to a missing or corrupted Winsock, but I never thought that a simple change of 2 files in the registry would solve the problem. Your piece of text was scary to look at in the beginning, but I was so desperate that I was willing to try anything and it really paid off. Microsoft should pay you the man! Their stupid suggestions do not work. For those who like me, I break down the instructions for you:

  Step 1: Click the button START
  Step 2: In the search box, type "regedt32" (of course, do not include the ""), right-click on the result of the research and the "Run as Administrator".

  Step 3: Click 'HKEY_LOCAL_MACHINE', should extend out to a list of things
  Step 4: Next, choose 'SYSTEM', is expected to increase again
  Step 5: Choose "CurrentControlSet", develops again
  Step 6: Select 'Services', develops into a great big list of things

  Step 7: Click on "Dhcp", the right window shows the files in this folder
  Step 8: Double click on "DependOnService".
  Step 9: Remove all the words in the text, except "Afd" box, and then click OK. You are done here

  Step 10: Then under 'Services', are looking for "EapHost", this should be a few records below Dhcp step 11: same thing, double-click on the file "DependOnService".
  Step 12: Delete everything in the text are and click OK. You are finished.

  Now close everything and RESTART WINDOWS. Your WLan should be back and work once at startup of your computer. Hope that makes you win like he saved me. Thanks to an original poster for the wonderful of the resolution. Your message has been almost too obscure to find, but I'm glad that this has been RESOLVED! I will be passing the word around to save people from the constant agony of WLAN SVC goes ballistic every time after a cleaning the registry. »

  Now then... I was about to wipe the machine flowering in any case, I thought ' what the *', and just did the 12 steps without even a reg backup... AND THIS DO FEAR WORKED!

  911techmedics saved our skins...

  Thank you!!!

  The Lady Sharrow...

• Xperia u is not turn on after trying to block the bootloader

  Hello
  a few hours back I tried to relock bootloader for xperia u with flashtool and after that I have cut my camera and when I press the power button / stop the phone will automatically flashmode and the green light of the bar light lights up for 10secs off goes but my phone market still not... I think that charging is completed and when I connect the charger again connects to flash mode and green light in the bar of illumuination...

  Other information. : when lock bootloader current im frozen bean 4.1.2 worn xperia P.. and now is not turn on
  Please help me!

  Subject published and proposed by Rickard

  Connect the phone to a wall charger > press and hold the power & volume 5 seconds > let it charge until the notification LED flashes in green, if you alread did, then repeat the process flashing again with a file different ftf

• No noise at all - computer brand new

  I just bought a new Dell desktop computer and I have no sound. Everything seems to be connected to the top as it should be. Volume is 100, but nothing. I tried to go online and diagnose a problem with Microsoft Fix It, but he said that nothing was wrong with my audio. I unplugged, replugged, in every place there is on the back and the front of the computer... I used different players I know work and still nothing.

  There is no little red x saying that I don't have an audio output device installed. Even when I unplug my speakers, I get no little red x.

  Maybe something wrong with my cpu or something...

  Hello, Josh

  Please use the Forum for answers!

  I apologize for the delay.

  Right click on the speaker icon in the Notification area, and then click playback devices. Right click on your device and choose test. Look at the bars to the right. Let us know whether or not the bars light up.

  If it shines, try the following: right click on the device of reading again but this time choose Properties, click Properties again and let us know the status of the device and on the driver tab, let us know the driver provider, signatory and also the name of the sound device at the top next to the speaker.

  We can't wait to hear back on your part.

  David
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• No sound Bose speakers

  Speaker configuration?

  I have no sound from my speakers outside bose still fine when the sound is hdmi is applied. When test config that I only hear the rear party and speaker rear right when the stereo option I have no sound even if the green bar lights up all the test see the sound system is very good I can't get sound, when I go to surround sound hdmi solutions

  Hello

  You did it of any material changes or software on the computer before this problem?

  It seems that the HDMI device is set as a default in the reading devices device if you are able to hear the sound from the HDMI device.

  You must set the speaker as default device in the playback devices and check if it solves the problem.

  1. open sound in Control Panel.

  2. click on the Read tab.

  3. Select the HDMI device and set it as default > click OK.

  In addition, you can connect the speaker on another computer and check that it works very well.

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Colorization of an action button

  Hello

  I'm running a matter of colorization with one of the ActionItem displayed on the action bar. The behavior I'm looking for is as follows. View the ActionItem in a different color to give a visual cue to the user indicating that the current dataset is filtered... With a theme dark, it works fine, but when I come back to the light theme, the image for the given button loses its colorization.

  Support colorization is new from 10.3 and higher, and I know in the backend, some magical 10.3 fact works changes the color of the image in support of the action bar light... Is it possible that I can get around this and allow my image to keep his blue colorization?

  See picture attached...

  After some digging... found...

  https://developer.BlackBerry.com/native/documentation/Cascades/UI/Image_Resources/assets.html#joh139...

  If the .amd file consists of the following:

  #RimCascadesAssetMetaData version = 1.1
  type: normal
  Source: "filter_on.png".