Barrage v860 cell vedio has no sound when played on the office window 7
No sound during video playback on computer, mobile phone Windows media player
Hello
1. What is the format of the video file you are trying to play?
2. are you able to hear the sound when you play other videos in Windows Media Player?
It can happen when the mute is enabled in Windows Media Player or the required codecs to read
the sound is missing.
I suggest to follow the steps below and we update on the State of the question.
Method 1: Control the volume slider in Windows Media Player and if it is set to low, increase it and check. Make sure that the sound icon is not depressed. This button is the button mute and will cut the sound.
Method 2: Check if you try to read the file format is supported by Windows Media Player or not.
http://support.Microsoft.com/kb/316992
If the file format is not supported, install check of the last codec.
http://Windows.Microsoft.com/en-in/Windows/Windows-Media-Player-plug-ins
For more information about Codecs, see the following link.
http://Windows.Microsoft.com/en-us/Windows7/codecs-frequently-asked-questions
Disclaimer of third party application:
Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Use of third party software is at your own risk.
If you have additional questions, or if this problem persists, come in and we will be happy to help you.
Tags: Windows
Similar Questions
-
X 301 has no sound when connected to the port replicator
Hello
We have a x 301 with a port replicator 45 k model 2777-cto 1610.
We first had the problem with the blue screen and not SA of lenovo or IBM might help. I found the solution here.
No, I have a new problem. When the port replicator is connected, there is no sound on the computer? Once the port replicator is unplugged, the sound works well?
Any ideas or advice will be appreciated.
Eugene
When you connect to the rep of the port, the audio should be routed to the audio port on the default port rep, not your system. There should be a setting via icon taskbar for rep port driver that returns the audio to make of her.
-
Get no sound when playing a DVD in Windows Media Player 11 on Windows XP
When I play a video DVD in WMP 11, (installed in Win XP Os), I have no sound. The video plays OK. I have no sound channel on mute, and other media to aufio play normally.
Maybe install an AC3 Filter would be worth a try:
(FWIW... it's always a good idea to create a system)
Restore point before installing software or updates)AC3Filter downloads
http://AC3Filter.NET/wiki/Download_AC3Filter
(tests - AC3Filter 1.63 full b) -
My Mac Pro is not turn on; There is power at the output, light or sound when I push the button 'on '. Any suggestions? Thank you
It was AC off recently?
-
I have a macbook pro 13 early 2015. Now I can here a clicking sound when I move the lanes on the side mac. Feels like some hardware is loose inside. But my mac works well as well. I left about 80 days of warranty. I'd give to repair? Someone had this problem? Suggestions please...
nidgp wrote:
I left about 80 days of warranty. I'd give to repair?
Absolutely, examined her! There is some kind of hardware problem.
Ciao.
-
Trying to access my creative cloud account to download a trial version of InDesign... I have a blank in the CC window screen when opened...? Water from the tap that says I'm download Indesign has been stationary for hours? The CC window is empty... I don't think it's the download. Why would it be?
White screen
-
How can I fix "Adobe creative cloud has stopped working" when I opened the DRES?
How can I fix "Adobe creative cloud has stopped working" when I opened the DRES?
Please try the following steps.
- Manager of tasks opened gently and then close process and relaunch LR
- Creative Cloud.exe
- Adobe CEF Helper.exe
- Service.exe Office Adobe
- AdobeIPCBroker.exe
- Adobe Installer.exe
- AdobeUpdateService.exe
- AdobeServiceInstaller.exe
- CreativeCloud (URIHandler) .exe
- AAM updates Notifier.exe
- CCLibrary.exe
- node.exe
- CoreSync.exe
4: If this does not work please remove Cloud Creative app.
- Using creative cloud | Uninstall the creative cloud desktop application
- https://helpx.Adobe.com/Creative-Suite/KB/CS5-cleaner-tool-installation-problems.html
3. install Creative Cloud app - https://helpx.adobe.com/creative-cloud/help/install-apps.html
-
I have no sound when playing my clips by adobe first 12 elements. How to fix this? I checked all the audio levels and there is no mute etc. I've updated to 12.1, but still no sound in clips. Not even on the old files that are used to work.
Bfun
What operating system is running your first items 12/12.1? Can we assume that this audio reads OK
on the same computer when you use a computer independent of Premiere Elements drive?
What are the properties of these clips that have worked before, but don't know regarding sound
For now, I will assume that you are working on Windows 7, 8 or 8.1 64bits.
Have you checked the settings change preferences/Menu/Audio ASIO hardware? You have all 3rd party audio devices integrated in your IT environment?
Please delete the Adobe Premiere elements Prefs file and, if it does not, then all 12.0 folder in which the Adobe Premiere elements Prefs file exists. Is the path to 64-bit Windows 7, 8 or 8.1
Local disk C
Users
Owner
AppData
Roaming
Adobe
First Elements
12.0
and in the 12.0 folder, is the file Adobe Premiere elements Prefs that you delete. If this does not work, then delete all 12.0 the folder in which the Adobe Premiere elements Prefs file exists. Make sure that you work with the Option "Show hidden files, folders and drives" of the current folder so that you can see the full quoted path.
You have the installation files or the installation disc with the serial number purchased in case we need to use to uninstall/reinstall?
We will follow your track to the top.
RTA
-
loading the page, the sound is played; prefer the page loads, sound not playing
Insert > media > plug-in
I select a soundfile, OK.
When I publish the page, it puts even a play/stop controller.
BUT the sound is played during the loading of the page, rather than wait
for someone to hit 'play '. I don't want to sound up to a certain
hits "play." (I don't want a new page to open, just play
in the web page, the page also wants to use quick time player.
Is this necessary? Is there a better way?
Thanks, everybody!
PS CS3
Lol just you a single controller with two audio files. If the browser/device does not recognize the first type of file, it is automatically the following file type.
Nancy O.
-
How can I stop Firefox closes when I close the last window open?
I had to get Windows 7 reloaded and my backup was corrupted (i.e., I couldn't use my custom Firefox.) So I downloaded the new Firefox and now it closes automatically when I close the last window opened. I prefer that Firefox stay open until I chose to close it. How to achieve this?
Hello 1DKG, do you mean when you close the last open tab? If yes you can replace it as follows:
enter on: config in the address bar of firefox (confirmed the message information where it appears) and search for the preference named browser.tabs.closeWindowWithLastTab. Double-click it and change its value to false. -
In my laptop, when I open the itunes window there is an option 'Internet Radio' to listen to the different type of music. This "Internet Radio" function can be used on my iphone 5? And if so, how can I make it work?
No more. It merged with the Apple's music.
-
When I download a wmv on an internet site and then play through the Player Windows Media, I get the audio but the video is just a green screen Uni. I was told that the media player can miss a card.
Hello
1. what operating system is installed on the computer?
2. are you able to play videos other than video .wmv successfully?
3. don't you make changes to the computer before the show?Method 1
I suggest you to check if the hardware acceleration of the display device setting is too high.
a. Click Start, click Run, type desk.cpl and then click OK.b. click on the settings tab and then click Advanced.
c. click the Troubleshooting tab, and then move the hardware acceleration to none.
d. click on apply and then click OK twice.
e. If the problem is resolved after you move the slider hardware acceleration to none, contact the manufacturer of the graphics adapter driver to determine if there is an update that resolves this specific problem.
Method 2
The required codec is missing or damaged. If the problem occurs when you use a .wmv file, download or reinstall the latest version of Windows Media Player. If you use an earlier version of Windows Media Player, upgrade to the current version of Windows Media Player for your operating system.
http://Windows.Microsoft.com/en-us/Windows/downloads/Windows-Media-PlayerIf the problem occurs when you use a different format of video file, for example a .mpeg file or an .avi file, download or reinstall the appropriate third-party codec.
Codecs: Frequently asked questions
http://Windows.Microsoft.com/en-us/Windows7/codecs-frequently-asked-questionsNote: With the help of third-party software or a link, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third party software or link can be resolved. Using third-party software or a link is at your own risk.
-
The images appear tense when played using the slide show in full screen
The images appear tense when played using the slide show in full screen in Windows Vista Basic. That means that a picture of resolution 1920 x 1200 appears full screen covering although a 1920 x 1080 image seems letterbox in fullscreen. My screen resolution was put to the native resolution of 1920 x 1080. It is clear that this slide show program only keeping the proportions of the image. Earlier this problem wasn't there. I think that the slide show program addresses in such a way that my monitor could have 16:10 display of report resolution l / h. thanks for giving me a solution.
This happens usually when the image resolution is high.
Keep your screen resolution of 1024 x 768 and it should work fine.
-
How to set sound to play from the speakers?
original title; Sound on laptop
A piece of the headphone jack is stuck inside my laptop, which means that there is no sound. I tried several times to get out of the room, but it is very small and is totally stuck... Is there a way that I can change the sound so I can hear directly from the laptop instead of sound is 'play' in the room by the helmet?
N °
Normally, there is a micro switch associated with the sicket phones that once you plug the laptop speakers turn off.Better to take the machine to a pro out little said.See you soon,.Jerry -
Original title: C://Windows/Assembly/GAC/desktop.ini
A scan has detected a Trojan horse in the C://WINDOWS/assembly/GAC/Desktop.ini file but I can't access this file because it is hidden.
What is a VRU, what should I do?
Hello
- You scan of bases of safety of Microsoft or any other security software installed on the computer?
Enable the option Show hidden files and see if you can correctly view the contents of the files.
I suggest you analyze your computer Microsoft Safety Scanner, it will help us to get rid of viruses, spyware and other malicious software.
The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.
http://www.Microsoft.com/security/scanner/en-us/default.aspx
Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.
Hope this information is useful.
Maybe you are looking for
-
Question on display on the Satellite A100-709
Dear Sir. I bought the Toshiba Satellite A100-709 15 wxga TruBrite TFT display. S. n: 86290992q. Purchase date 10 February 2007. But while I was working display couldn't all off a sudden. View life is only 2 or 3 years. Is Toshiba views are long term
-
Why my instrument sends the response to the last command sent?
Hi so I'll try to schedule this RLC SR720 via a USB/GPIB interface. I can communicate with the machine and it does almost what I want, but this oddity and I suspect I'm missing something basic. The manual can be found here. It meets the common as GPI
-
BlackBerry Smartphones turn off the wireless feature
Is there a way to quickly turn off the features "BOLD" wireless, so I can not transmit or receive? I would use it in the aircraft on a trip, but I can't find a way to quickly turn off the transmission and receive the device characteristics. Thank y
-
where to download the software VM - FEX on UCS manager 2.1(1a)?
I'm looking for the file .vib to install it on the ESXi host. Manager of UCS 2.0, it allows to have a link on the home page to download the file. A 2.1(1a) is not there. Any idea where I can find it? Thanks in advance.
-
I was wondering if anyone knows with certainty if the Blackberry Premium Multimedia Headset controls to play, pause, skip, and volume will work for the new PB coming out. In case there is any confusion, the helmet, I want to talk about is manufacture