base-image menu to access a section in a second page

Similar Questions

• I can't access the section of customize notification area. When I click the button nothing happens.

  I can't access the section of customize notification area.  When I click the button nothing happens.  It is also the same thing when I try to access it through the control panel.

  Hi Mpnieland,

  ·         Were you able to access the section Customize notification before?

  You can try the following steps and check if it solves the problem.

  Method 1: Try to boot in safe mode and check if you can access the section Customize.     You can check the link below.

  Start your computer in safe mode

  Method 2: Try to start the clean boot and check if help. See the article in the link below to perform a clean boot.

  http://support.Microsoft.com/kb/929135

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  • Click Start, type msconfig.exe in the Start Search box and press ENTER.
  • If you are prompted for an administrator password or for confirmation, type your password, or click on continue.
  • On the general tab, click the Normal startup option, and then click OK.
  • When you are prompted to restart the computer, click on restart.

  Method 3: You can try to create a new user account and check if the problem is solved in it.

  To create a user account follow the steps below:

  • Open a user account by clicking on the Start button, select Control Panel, click user accounts and family safety, and then click user accounts.
  • Click Manage another account. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  • Click create a new account.
  • Type the name that you want to assign to the user account, click the account type, and then click create an account.

  For more information, visit the below mentioned link:

  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

  If the problem is resolved in the new user account, you may have corrupted profile.

  Here is the link for troubleshooting a corrupted profile, you can follow the steps mentioned in the link.

  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  Hope this information helps.

• CS5 Production Premium integration computer base IMAGE

  I'm looking to set up a PP CS5 in one of my computer labs. Can I build the facility prior to deployment or do I do once I have built and deployed the base image.

  Please let me know if there is a more appropriate place for this question.

  Thank you for all the input

  Packer links https://forums.adobe.com/thread/1586021

  http://forums.Adobe.com/community/download_install_setup/creative_suite_enterprise_deploym ent

• without changing the properties of the base image create a substitute image size increase?

  Without changing the properties of the base image, how I create an alternate image effect that increases its size when the cursor hovers over the base image?

  I hope that makes sense!

  RLS

  Simple Image Zoom bootstrap - http://alt-web.com/

  Thumbnail Images

  
  
  
   
  • class="zoom" src="http://lorempixel.com/110/110/abstract/1">
  
   
  • class="zoom" src="http://lorempixel.com/110/110/abstract/2">
  
   
  • class="zoom" src="http://lorempixel.com/110/110/abstract/3">
  
   
  • class="zoom" src="http://lorempixel.com/110/110/abstract/4">
  
  

  CSS:

  .zoom { 
  -webkit-transition: all 0.35s ease-in-out;
  -moz-transition: all 0.35s ease-in-out;
  transition: all 0.35s ease-in-out;
  cursor: -webkit-zoom-in; 
  cursor: -moz-zoom-in; 
  cursor: zoom-in;
}

  .zoom:hover,
  .zoom:active,
  .zoom:focus { 
    /**adjust scale to desired size
    add browser prefixes**/
    -ms-transform: scale(2.5);
  -moz-transform: scale(2.5);
  -webkit-transform: scale(2.5);
  -o-transform: scale(2.5);
  transform: scale(2.5);
  position: relative;
  z-index: 100;
  }

  Nancy O.

• VMware FT - same or different base image?

  Hi people,

  VMware Fault Tolerance using the same base image for primary and secondary of the VMS (FT) or different?

  Thank you..

  Hari.

  VMware FT will use the same vmdk shared storage is necessary.

• View Manager 4 - can't see the base image

  Hello

  I have two View 4 installations on separate networks.

  One of them, the view of the Sources of the display manager's office has a field of the Base Image, which is really useful to see requiring VMs redial.

  In the view of the other area manager, the Base Image field is missing...

  They are the two 4.0.1 build-233023

  How can I get this practical point of view in my other View Manager?

  Thank you

  I have observed that the column "Core Image" (and "disc of the user) is visible in the tab"Office Sources"with persistent Office pools. The pool you are looking at is maybe not persistent.

  Dennis

• While updating my profile facebbook, I clicked on the 'block profile image' option and a notification popped up that Firefox cannot display images on my profile. I can't access the pictures on my facebook page. How do I reverse this order?

  Cannot display profile pictures of friends and me, instead, Firefox displays only the names, fewer photos. I need to have the images released so that they can appear on my page. Kindly help. bold text

  Is he missing pictures then make sure you are not block images from certain domains (sphotos.ak.fbcdn.net).

  • Check the permissions for the domain in the active tab in "tools > Page Info > Permissions.
  • Check that the images are enabled: Tools > Options > content: [X] loading images automatically
  • Check exceptions in "tools > Options > content: Load Images > Exceptions.
  • See the tab "tools > Page Info > media ' for blocked images (scroll all the images with the cursor key).

  If an image in the list is grayed out and there is a check mark in the box "block Images of..." and remove this mark to unlock the images from this area.

  • http://KB.mozillazine.org/Images_or_animations_do_not_load

  There are also extensions (Tools > Modules > Extensions) and security software (firewall, antivirus) that can block images.

• Link to a specific section of a different page.

  I have a drop down menu on my navigation bar.  I want the links on the drop down menu to bring me to different sections of a different page. This is the code I used.

  This is the html code for the navigation bar:

  < nav id = "nav" >

  < ul >

  < class li = "current_page_item" > < a href = "index.html" class is 'House' style is"police family: nexa_rust_sansblack" > home < /a > < /li > "

  < li >< a href = "services.html' class is 'services' style is" family are: nexa_rust_sansblack "> Services < /a > "

  < ul >

  < li > < a href = "services.html #manage ' > management < /a > < /li >" "

  < li > < a href = "services.html #strategy" > strategy < /a > < /li > ""

  < li > < a href = "services.html #design" > Design < /a > < /li >

  < li > < a href = "services.html #optimize" > Optimize < /a > < /li > ""

  < li > < a href = "services.html #store" > shop < /a > < /li > ""

  < li > < a href = "services.html #social" > Social Meida < /a > < /li > ""

  < /ul >

  < /li >

  < li > < a href = "portfolios.html" class is "portfolios" style is"police family: nexa_rust_sansblack" > portfolios < /a > < /li > "

  < li > < a href = "contact.html" class is 'contact' style is"police family: nexa_rust_sansblack" > contact < /a > < /li > "

  < /ul >

  < / nav >

  It is the way that each section of the page, their link is coded.

  < section class = "box" >

  < header id = ' manage' >

  Center of <>< img src = "images/manage.png" alt = "Web development Image" > < / center > < br / > "

  < h3 > site & Mobile development < / h3 >

  < / header >

  < p > content here < /p >

  < / section >

  But this doesn't seem to work.  Does anyone have a suggestion? Thank you.

  Obviously, this is not the way in which these links to internal pages should work. The fact that your are not working suggest me that by clicking on the link in the menu starts an internal timer in one of your more than several routines javascript that causes the page to refresh the top of the page. I can't think of a good way to find that, other than disabling js files, one at a time.

• Cannot add text to additional images on the second page of brochure

  Greetings,

  I want to explain it, so there are many understand the problem that I have in InDesign CC.  I created a tabloid size for a company brochure.  The outside cover works perfectly, I can add multiple blocks of text and add text to all created frames.

  Now when I go inside the cover of this brochure, I can add text for the first block of text that was created without any problem.  When I create subsequent text frames, I can't have a fast blinking cursor inside one of the frames.  The slider appears across the page in the upper left corner of the booklet, instead of the image.  This happens for all the images I create after the first picture on this page.  I select the text layer and the image appropriate, then I go to the text tool and try to place the cursor inside the frame, and the text tool will not active there.  All text created will begin appearing in the upper left corner of the booklet where is the blinking cursor!  If I delete the first block of text on the inside cover, and then create all new text frames; I can't add text to one of the new executives either.  It almost as if text is limited to that very first image I created.

  Thank you

  Carl

  Good,

  I found a work around.  Honestly, I want that the Type tool to convert frames for text blocks.  This occurs on the outside cover, and not on the inside cover.  So what I've discovered, it was that the executives who were not automatically convert to text blocks, I could manually convert them by accessing the object > content > text.

  I have yet to understand why the Type tool will do it on a single page and not the other, but at least I can end this now!

  Thank you

  Carl

• How to get out the sections as separate Web pages user guide?

  I have a guide of heavy use (MS Word file) which has several sections and subsections (e.g., 1.2, 1.2.3 etc.). When I pulled out using Webhelp, Responsive HTML5 or any other SSL, the guide is published under a long Web page. I can use the table of contents to access certain sections, but I can of course scroll upwards or downwards for other sections. Is there a way to isolate and each section as well as a separate page, while keeping the table of contents complete?

  It would be extremely tedious to split the Word file, then import them individually into Robohelp...

  I am very new to Robohelp, so any help is very appreciated! Thank you!

  I moved this post to the RoboHelp for Word forum, existing links will continue to work. RoboHelp for Word is a separate product that no longer ships with RoboHelp.

  The document can be divided according to the styles then maybe you can set styles to give the breaks you want. On my site, see Importing and creating a binding.

  See www.grainge.org for creating tips and RoboHelp

  

  @petergrainge

• How to print only a Section of a Web Page

  Hi, recently I put the layout of my site in manufacturing work on the phone and a tablet. Is it possible for me to code in my Web site for each page what sections of the web page I want to be printable? For example:rental management company

  This link above goes to one of the rentals that we have and all its details. I want to make sure when I go to file and click on print, it does not print out details on a page and only and excludes the red side, footer and logo/header bar, only print the details.

  Is it also possible to do a "print key" on the page itself which is not under the file menu at the top of the browser?

  As always, any help is appreciated!

  The browser is likely to be confused by your attempt to add a media query according to the @import rules you have.

  I have never tried this level to confuse MQ.

  Personally I move all 4 LF in a unique style, with the impression that the last sheet, @media and call this sheet only.

  That should fix it.

• Table of contents using a style/section of the master page

  I'm at the top of my head I think... and probably incorrectly to the top of my document.  I hope I can quickly explain where I am:

  Question 1

  I'd like a Table of contents to use 10 section headers that appear throughout my document.  Here's how I set up:

  • In the master page, a place for the header of section and it gives a paragraph style.
  • Then, throughout the document, I used the "numbering and section options" start each new section and give this article is the unique name.

  When I went to generate the Table of contents, I've specified using this particular paragraph style that I used for the section headers, but nothing appears (except for the title, I asked for the General table of contents).  It's as if this isn't to find the sections - or this style (which applies only to the master page).

  Where am I wrong?

  Question 2

  I wish that my Table of contents, not numbered.  How do I do that?

  Shanell

  I don't know that you understood my post. I was able to do exactly what you did - create a master page with a frame and the section marker character (indicating "section" on the master page) and then add the actual text of the marker in the numbering and section options. The text appears on the page of live document.

  When I tried to do a table of contents, text was not resumed UNTIL I selected and carried this master frame on the page of the document (Ctrl + Shift + click on Windows or Cmd + Shift + click on Mac on the image that you want to replace). After substitution, the text appeared as scheduled in the table of contents.

  You're right about the number of page for this page. You can use another master without a page number, or you can cancel and delete the master page number frame. I assume that you will need to use a different master for the first page and pages in any section to avoid having the marker appear on all pages, or you can replace only the first page so that you don't repeat entries in the table of contents for each page of each section.  If you use the marker as a running header Section, you can learn more about Variables header running in the help files in place. In many ways, the use of a variable can be simpler and more direct.

• Help please. My spry menu bar font sizes are smaller in some pages than others.

  My spry menu bar font sizes are smaller on some pages compared to others. I can't understand why since I am referencing the same file of sprymenbarhorizontal.css on both pages. I am new to dreamweaver and HTML. Help, please.

  I'll post my code if someone tell me how do.

  Hello

  You can use a different font instead of '%' in px size in your "sections" like I did (12px was that my choice to see what is happening. Of course you can use all the other sizes):

  1. in the present case:

  UL. MenuBarHorizontal
  {
  margin: 0;
  padding: 0;
  list-style-type: none;
  do-size: 12px;
  / * font size: 70%; * /
  cursor: default;
  Width: 865px;
  }

  2. here:

  UL. MenuBarHorizontal li
  {
  margin: 0;
  padding: 0;
  list-style-type: none;
  do-size: 12px;
  / * font size: 70%; * /
  position: relative;
  text-align: left;
  cursor: pointer;
  Width: 168px;
  float: left;
  border-bottom: 1px solid #660066;
  border-right: 1px solid #660066;
  border-left: 1px solid #660066;
  border-top: 1px solid #660066;
  }

  3. in the present case:

  UL. MenuBarHorizontal ul
  {
  margin: 0;
  padding: 0;
  list-style-type: none;
  do-size: 12px;
  / * font-size: 100%; * /
  z index: 1020;
  cursor: default;
  Width: 164px;
  position: absolute;
  left:-1000em;
  }

  Hans G.

• How to resize my screen? I do not see the menu f or at the bottom of web pages unless I have 'restore down' for a smaller size of the window.

  I do not see the menu f or at the bottom of web pages unless I have 'restore down' for a smaller size of the window.

  The problem is when you maximize the window - it is even bigger than the available surface? Or the problem is that normal windows are always too big and have to manually resize?

• I run 10 64-bit Windows and I have used iTunes for years. iTunes installs OK, I disable Norton Firewall during installation. iTunes starts OK, but when I try to access the store down ¾ of the page turns black

  I run 10 64-bit Windows and I have used iTunes for years. iTunes installs OK, I disable Norton Firewall during installation. iTunes starts OK, but when I try to access the store down ¾ of the page turns black, the upper band has Taylor Swift and a few small icons to the bottom of the page. If I type Perry Como, in the search box, the page does not change.

  lysdexic01, I know almost exactly what you describe on my screen of iTunes Store recently updated for Windows 7 64-bit. Only difference is that the icons in the black box are invisible until I move the mouse above them, their location by trial and error. Once activated, the icon remains visible. Each found icon flickers at first, but stops flashing if I pass the mouse over it.

  I think that the store is now functional and useless for those of us experiencing this problem. Other users have reported that their iTunes store screen flickers since they updated iTunes to the latest version, but most did not mention the area big black screen that you and I see.

  So far, Apple seems not to believe that there is a problem with the software to update iTunes. It is therefore important that users continue to report these problems to Apple that there are enough complaints for attention even during a week of office party.