Base the missing ProBook s 4330 peripheral system

Similar Questions

• "Info product programmed into the system card is missing or not valid card system:

  Info product programmed into the system card is missing or not valid card system:

  The OOA product name,

  OOA serial No.,

  OOA product #.

  System OOA board ct #.

  I get this message every time I start all of a sudden. What it means and how to fix it? I just bought this laptop from staples are about 4 months!

  Jenn121 wrote:
  

  How to send the unit into operation? I was given assurances on this matter of Staples, can I put it to return? Or I'm doing something else?

  Your 1 year warranty is HP and no store, but I do not know if they accept your laptop for service. You can use HP support (phone/Email/Chat) and connect to a case of this problem and directives on service will be communicated to the customer service you HP.

• ProBook 470 G3: ProBook 470 G3 fan system after flashing the BIOS errors

  B has recently purchased a HP ProBook 470 G3 with i7 CPU. When I got the laptop I placed my own memory and M.2 SSD in and performed a clean installation of Windows 10 x 64. Everything was fine, I installed all the drivers and the laptop worked perfectly. However, when I flashed the new BIOS, V1.07 Rev A, I started to have problems.

  I use the laptop for academic purposes, I so open and close several times a day. After flashing the BIOS again, the laptop awake sometimes not, and trying to turn off it I had to remove the battery. Would not even holding down the power button for 20 seconds. While booting after removing the battery, I'd get a system error, 90 b error code fan.

  I tried re flashing version 1.07, but returned eventually to version 1.06. This version works very well. It was a real let up to me, given that this laptop costs €1400,- and should be a book reliable business.

  Is their another experiecing the same problems? If so, how do fix you it? And no one knows when they will be a stable version of BIOS V1.07?

  Use the PC Hardware diagnosis UEFI to restore the previous BIOS so that that you flashed cause questions.

  Press the power button and then immediately begin to press the F2 key to evoke the Diagnostics menu.

  Choose firmware management. In the menu next, choose and click on revert to the previous version.

  You can also create and use the 3-in-1 usb to accomplish the same.

  http://WWW8.HP.com/us/en/campaigns/hpsupportassistant/PC-DIAGS.html?JumpID=va_r602_us/en/any/PPS/pl_ot_ob_ds_pd/HP_PC_Hardware_Diagnostics_cc/DT

• The missing files (NOT deleted) of the file/directory of the system drive NTFS

  Greetings!

  I have a WinXP SP3 system with a SATA 2 TB to the additional internal address as a data reader. This player has only the data (.mp3, video) files in a directory and has never been used for anything other than data files. There is only one directory for the files, and although it is four levels of subdirectories to the bottom, the tree is only these four subdirectories.

  A week ago, I noticed that the free disk space on this drive jumped from 350 GB up to 1.2 TB, leaving about 600 GB of data on the disc (about 2 500 files). After checking what is obvious (Rebreather, etc.), I noticed that the missing files were all from one file *. * to n *. * and [0-9] *. *. All files beginning with o *. * to z *. * are still there. So, essentially, Miss me about 9 000 files.

  I checked to see if the missing files could be cancelled or retrieved and downloaded several utilities 'undelete' recovery or data. All public services showed that there was no data to recover, that is, the files just disappeared or evaporated.

  Where did they go? I'm totally distraught about it.

  The files are not hidden, because the reduction of space disk; hidden files still take up the space.

  I didn't something in training in the hope of recovering the data. I thought that perhaps an index obtained corrupted or deleted because files deleted did not appear in the correct order of the directory index. I ran a chkdsk on the volume, he came to own, and the files were still missing. If the files have been deleted in alphabetical order, they would still be "deleted", recoverable files?

  I also tried to see if I could do a restoration of the system to the point in time before the files have disappeared, but my System Restore says there is nothing to not restore, no action to take.

  Any ideas appreciated.

  ....k

  R - Studio found the files missing, but only about 75% of them were really recoverable. Those who were not recovered was a length of zero byte. The advantage is that the names of the files were still intact, so at least I know which ones to re - create. The downside is that it's a few thousand files that need to be redone. That will take time, but a lot less time that I would have had to spend to recreate all missing files.

  R Studio also found entries previously deleted files, and I got these, too. However, the recovered files are damaged and unusable. Given that I didn't really need those, it wasn't a problem. I mention this simply as something that R-Studio accomplished (and the other tools do not have).

  The recovery is complete in terms of finding the missing files and restoring their readers to spare.  It took a lot of time, about three days I was doing piecemeal in bursts of 500 GB move the files recovered on spare disks. I'll move the files that I had not lost before out of the disc problem, as well, and then replace it. readers are cheap these days.   :-)

  Thanks for the help! Also, thanks for the recommendation R-Studio; This is a very useful tool and well worth the expense!

  ....k

• Removable storage to access folder is missing from the group policy under Administrative Templates\Systems

  Hello

  I intend to control the reading and writing of removable storage devices using Windows Server 2008 GPO.

  However, after reading the online group policy settings, when I tried to apply the GPO settings, I found that 'Access to removable storage' folder is missing from the group policy under administrative Templates\Systems.

  Please suggest others.

  Thank you

  Amit Jogi

  Hi Amit,

  Thanks for posting your query in Microsoft Community. However, your question is beyond the scope of what is generally answered in this forum of consumer and would be better suited for the IT Pro TechNet public.

  Please post your question in the TechNet Forums.

  Thank you.

• If I have not access to the disk partition hard base would impact on the installation of a complete operating system?

  Original title: TPG Server petition.

  I wanted to know if I di not actually have access to the disk partition hard base would impact on the installation of a complete operating system of Windows 7 Home Premium 64-bit? Instead of having a computer with a complete installation of windows mine came with versions of WinPE OEM, NT and MCE. The GPT partition server that I can see is protected. Partial operating systems seem to be installed on network disk Volumes. I think that what I have to do down the disk hard real all delete and start again but I'm having a problem to see what is all about the drive through programs and remove what I find. He also seems to have a certain type of script hidden BIOS more wrinkles to retail and canceling all decisions on versions of the oem .cfg files. She configures and installs the server instead of windows 7 Home Premium 64 bit server software. The installation gives the highest administrative authority to the network administrators who I don't know and have never met and to manage my personal laptop. It creates a serious problem when I want to use my computer for one purpose and that some people I don't know and have never met want me to use my computer for something else.

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  TechNet Forum
  http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  Hope this information helps.

• For some reason, the tab 'Base' is missing from my file to develop trying to change using LR5... ? Help, please

  For some reason, the tab 'Base' is missing from my file to develop trying to change using LR5... ? Help, please

  Right-click (Cmd-click Mac) on another connector for Panel as "tone curve". Make sure there is a check mark for Basic as all other sections of the Panel you want to display.

• 1 of about 30 directories with JPEGs would not import into LR 5.7.  Operating system is Windows 10.  How can I import the missing directory?  I tried to import more precisely, but I get an error message on the format of the pix.

  I had a directory on 5.7 LR, but she and everyone else on LR 5.7 got accidentally deleted.  I have re - import all but one of the missing directories.  One missing won't matter with DNG, added / COPY.  My OS is Windows 10.  How can I import this a directory.  I checked the properties of the missing directory with those who imported and they are all the same.

  You can combine catalogs by opening the 'master' catalogue (the one that you want to contain ALL your photos) and then using the command file-> import from another catalogue and pointing to the catalog on the other. If there is more than one catalogue of 'other', this action must be repeated as many times as necessary.

• Creating a copy of the base data missing data UNDO files

  I need to create a copy of a database 11G on a windows server (using a script to create controlfile with database set = "database_name") from a cold backup that was taken at the time, but the backup lacks 2 3 of the UNDO tablespace data files.
  
  There is a lot of advice to suggest that setting undo_management = 'MANUAL' a database can be restarted and the missing data files dropped (and recreated)... However, I don't know if it is a solution that works in the context of rename the database by using create controlfile method
  
  does anyone know if the parameter undo_management = 'MANUAL' is all I have to do? or is it more...
  
  any suggestion would be received with gratitude...

  Dear patrichards,

  Your quite welcome. I am pleased that you have solved your problem.

  Kind regards.

  Ogan

• How to install the missing dll files when I try to get latest microsoft updates and get the error msg ox8024D007

  I can also access my control panel, but when I try to add/REMOVE a program it says that is missing a required dll file

  You could try auto fixit or manually install the microsoft update agent.

  http://support.Microsoft.com/kb/949104

  Or refer to the knowledge base article:

  http://support.Microsoft.com/kb/956701

  Agent update for the x 86 system.

  http://download.windowsupdate.com/WindowsUpdate/redist/standalone/7.4.7600.226/WindowsUpdateAgent30-x86.exe

  The updateagent for x 64-based system.

  http://download.windowsupdate.com/WindowsUpdate/redist/standalone/7.4.7600.226/WindowsUpdateAgent30-x64.exe

  I hope this helps.

• Alert entered for the missing data file

  I'm trying a simple payback scenario: remove a data file to a tablespace that is normal when the database is running, and the data file has been saved.
  
  Before, the control point ends normally (I guess that still retains the file inode handle Oracle). When I choose to dba_data_files, the error occurred:
  

  SQL> alter system checkpoint;
  
  System altered.
  
  SQL> select count(*) from dba_data_files;
  select count(*) from dba_data_files
                       *
  ERROR at line 1:
  ORA-01116: error in opening database file 10
  ORA-01110: data file 10: '/u01/oradata/data01.dbf'
  ORA-27041: unable to open file
  Linux Error: 2: No such file or directory
  Additional information: 3

  To my surprise, nothing has been recorded in the alerts log. And no trace of the files not generated in udump. And Oracle has refused to restore the data file when he was running.
  
  The message appeared in the journal of alerts when trying to stop the database. After abort shutdown (Oracle refused to stop immediately) and restart the instance, I was able to restore and recover the data file.
  
  This is the expected behavior? If so, how you would detect files of missing when db is running?
  
  
  Oracle: 9.2.0.6, OS: RHEL3

  1. it has not detected by the control point caused by a switch logfile because the file is not actually missing. Like other - inded you! -have, Unix/Linux, you can remove a file at any time, but if the file is in use, the inodes are allocated and the process using it continues to see it very well because it. Because, at the level of the inode, it IS absolutely still there! Either by the way, it is needless to say to make a logfile switch, because as data files are concerned, which does nothing, that the command of alter system checkpoint that you already tried.

  I used to do demos of how to recover from the complete loss of a controlfile in Oracle University classes: I would like to make a burst of rm *.ctl commands and then significantly question the command checkpoint... and nothing happened. Very demoralizing the first time I did it. Deliver a force of startup, however here the inodes are released at that time, files are actually deleted and start falls in nomount State. Bouncing the instance was the only way I could get the data base to protest against the removal of a data file, too.

  2. No, if a file has disappeared in a way allowing to detect Oracle, it wouldn't matter if the folder was empty because he's worried the presence/absence of the datafile headers. They need to be updated, even if nothing else does.

  3. it would be in the alerts log if SMON has detected the lost file at startup (one of his jobs is, explicitly, to verify the existence of all the files mentioned in the control file). CKPT would not trigger an alert, because concerned, all right. Inodes are still held, after all. Your attempts to create tables and so forth inside the lost file do not generate display errors (I think) at this time, it's your server process that seeks to do things for the file, not CKPT or pre-existing other background process, constantly running.

  4. it's specific to Unix, anyway, that Linux is a Variant.

• Satellite M70-360: CEekey.eke can not run because its the missing dll

  I accidently deleted the ekecioctl.dll and now whenever I start my laptop (Satellite M70-360) I get an error message saying that CEekey.eke can not run because its the missing dll. Anyone know where I can download the dll?

  Thank you

  Hello

  The CEekey.exe seems to be part of the Toshiba E - key utility.
  Therefore, you should try to reinstall this utility to obtain the keys working again.

  Another clue; have you tried to restore the operating system to the early time point?
  XP supports the System Restore tool. You can easily put the BONE at an early stage and the E key should work again I hope ;)

• "The missing config file corrupt" error message appears

  When I start my laptop, I get the "Missing config file corrupt" message and I can't start windows, it falls needs the original installation cd-rom!

  It seems that I do not have this cd? That I should?

  I don't want to just do a restore from the hard drive that I'll lose everything.

  Any ideas?

  Please, I beg you!

  Hello

  Have you tried booting in safe mode?
  If it is possible, then you can try to use the System Restore tool under Programs Accessories System Tools, you should find.

  Try to roll back the OS to the beginning. Well, if this procedure doesn't help then as said jmatthews you save files on the other computer and reinstall the operating system.

• Satellite A30-921 PSA33E - no sound and the missing "speaker" icon

  Some time ago, I lost the sound and also the missing "speaker" icon.
  But the sounds in the control panel and all its grayed out. Restarted the system and everything has been restored.

  Once again lost both and rebooted but is more than this noise of restoration. Icon was back at the helm of the tasks, but when you click on it, all greyed out.

  Uninstalled the audio driver and used the disk utility to try to restore the sound, but does not work: visited the download from Toshiba site and I tried the Realtek driver, no luck. Checked with my Bios Update and I have the latest version.

  What is going on???

  If anyone can help...

  Congratulations to all.

  Hello

  I think that you must first remove the old sound driver.
  Check if there is an entry in Control Panel-> Add & Remove programs.

  In addition, you should go to the Device Manager and should remove the sound card in the list of devices.
  Just mark the sound card and remove it.
  Reboot the laptop.

  After that restart of the operating system (Win XP) should start looking for a new device and should ask the audio driver.
  This is the time to point the driver package, and files that you downloaded from the Toshiba European page.

  Check to see if that would help!

• create a link to the missing project file

  Hello community,

  for reasons beyond my control some PDF files in one of my projects have been moved on the server of the company structure and should stay there.

  Naturally, these files are now marked as missing in my project. I know where they are - I'm looking for a way to tell LabVIEW.

  If I their right click in the Project Explorer and select "Search for the missing items", I get only a seemingly useless window listing all missing PDFs with no apparent way to solve the problem.

  This should be easy to do, Miss me just something, no?

  My Google search suggested that this could be possible with the professional package (not sure), but no help for me.

  LV 2014 SP1, full development on Win7 64 system.

  Any ideas?

  Best regards

  Florian

  Here's what I'd do:

  1) Save my file .lvproj

  Open 2) with a good text editor

  (3) find the old path and replace the entire (or individually... If you have other files that has not moved) with the new path, taking care that the structure/format remains the same (for example the path separators)

  (4) save and reopen in LabVIEW

  Either that or remove the elements missing in the project and then re-add-the manually or fix them individually.