Basic (right uppre area) control block disappeared on screen development

Similar Questions

• Sites on the list are now blocked

  Summary of the issue
  Other issues of Windows Live family safety

  What version of Windows Live Family Safety do you use?
  Version 2011 (15.4.3538.513)
  Choose your operating system version:
  Windows 7

  Additional details
  My son has a filter "allowed list only" on his account, however, sites I have on the list of my son are now blocked and even if I try to reapprove them, they are always blocked.  I tried everything I can think of.  It is obviously not a computer problem because it does the same thing on the computer and the laptop.  Help, please!

  I did the following and it fixed the problem where the authorized sites were blocked:

  1. remove the PC from the parental control Web site (they get automatically added when you go through the following steps)
  2 turn off parental control on the PC under control panel, the Parental control (in the drop-down list, select 'None')
  3 reset (perhaps not required, but I still just to be sure everything is reset)
  4 re - activate parental control on the PC under control panel, the Parental control (in the drop-down list, select "Windows Live Family Safety")
  5. from the Parental control, select the user account that you want to activate for parental control and go through the standard process
  6. connect to the family Web site security and web to DISABLE filtering for the account, click Save.
  7. right click on the parental control in the right lower bar icon and select "open family safety filter.
  8. click on the circular icon blue arrows in the upper right corner of the dialog box to refresh the parental control settings.
  9. open a few websites to ensure that you can access.
  10 sign in to the family safety website again and ENABLE web filtering for the account, click Save.
  11. yet once, click on the circular icon blue arrows in the upper right corner of the dialog box to refresh the parental control settings.
  12 should now work (work sites permit, unauthorized sites do not work)

  I did these steps on each of my children PCs and they work now.

  Rensul

• Volume control icon disappeared

  My office is running vista and a few days ago the icon in the notification area white volume control has disappeared. When I go into the properties of the taskbar to show once again, the volume option is grayed out. Can anyone suggest a way to recover the icon? (I tried to reboot several times)

  Hello

  1 Please reboot nothing so interfere with this process.

  Click with the right button on Taskbar - Properties - tab Notification area - check box Volume - if it is grayed out
  Then, use this link. (Ditto for power, clock and network.)

  How to enable or disable the system tray in Vista icons (there are several methods
  "(et vous devrez peut-être utiliser l'ensemble)."
  http://www.Vistax64.com/tutorials/106787-notification-area-system-icons.html

  If necessary: a Mr Fixit

  System icons do not appear in the notification area in Windows Vista or in Windows 7 until you
  Restart the computer
  http://support.Microsoft.com/default.aspx/KB/945011

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Firefox toolbar upper and lower are suddenly "floating", disappearing and appearing, and it is not convenient for me. What can I do?

  Top Firefox toolbars and below are suddenly "floating", disappearing and appearing, and it is not convenient for me. What can I do? I need them to be there all the time.

  Make sure that you run not Firefox mode full screen (press F11 or Fn + F11 to toggle; Mac: Ctrl + Shift + F).
  
  If you are in full screen view then hover over with the mouse upward to make the bar appear Navigation and tab bar.
  
  You can click the maximize button in the upper right to leave the mode full screen or empty space of a right-click on a toolbar and use "exit full screen" or press F11.

• Want Sleekbook m6: Beats Audio Control Panel disappeared after the update of the 10 anniversary window

  Hello.

  After upgrading my OS Windows Anniersary Update 10 last week, my Beats Audio Control Panel disappeared. The audio is not yet, but the EQ settings I had set by beats do not seem effective. The IDT drivers seem to be installed and updated according to Device Manager.

  Thank you

  @hm8

  Hmm...

  • Create a Restore Point
  • Download the Audio driver from the Support page of the drivers of your computer for Windows 10

  Uninstall the driver from Device Manager > restart (or search the hardware changes) >

  If the driver is available in your file system, it will try to reinstall it at startup / login >

  Check the results

  If no joy:

  If HP drivers are available for Windows 10 for your computer:

  Download and install the Chipset driver > restart and sign

  If the Audio driver is available in the Support page for the drivers for your computer:

  Uninstall the driver from Device Manager AND check the box to delete the driver >

  Restart and log in >

  Install the driver from the driver of your computer support page.

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  Fixed / responded? Click this post accept as Solution to help others find answers.

• I want the programming palette appear everytime that I click right while in the block diagram

  I want the programming palette appear everytime that I click right while in the block diagram.  Right now I have to look at the dialog box Express, down arrow and then click programming.  I want the programming to bring up the first.  This should be very simple, but for some reason, I don't see the solution in help.

  go to tools...options...controls/functions... formatting palette

  Select "Icons only" and "category (standard)".

  Now make a right click and PIN the palette to get the button "Customize". Select 'change visible pallets... '. ' and click 'select all '.

  see if it's better.

• The storage control blocks were destroyed

  Tonight I was check my Microsoft color management system and made a demonstration of calibration results. I run a laptop.

  I do this in preparation to rework some of my photographic images in preparation for printing from a site selling products online of art which I am a member. ICC color profiles and so on was my reading today on the internet - Phew!

  In any case, I made a mistake. I had downloaded a profile soft proofing (zip file, I scanned with my anti-virus and that's okay). However, I had not checked out files.

  While I was still in the color management, I clicked on the Add button to add this profile soft proofing, and when I finally found the file and clicked on it once, I got the message: "the storage control blocks were destroyed." Does OK, no information on what to do.

  Then, I went on the internet and do a Bing search and found that it is supposed to be an indication that there is corrupted system files. And, later, I'm a little lost as to what to do.  I didn't run any programs to solve this problem, even ' tho there is something called RepairImage.exe. I decided to come here instead, go to the source. Any help please? Thank you.

  Have you tried to start the computer in safe mode? If so, what was the result? Was question still persists in safe mode?

  Safe MODE: open and used two programs I normally use, and they recorded the changes that I made for them. In clean boot mode, I could see these changes had "taken."

  I tried to calibrate a screen, but only got the following message:

  Red X: display color calibration

  Display color calibration can not calibrate the selected screen [which is my LAPTOP LCD flat screen] because it cannot determine whether the display is in 'mirror', which means that the office is duplicated and show on different screens. Calibration of the color screen cannot calibrate a screen reflected.

  What has been the result of clean boot?

  Starting in MINIMAL MODE: the system enabled me to follow up to completion with screen calibrate (although I didn't want to load the profile of different color referred to in my original post). There is no messages of any kind.

  Re-started in Normal startup mode.

  What can I say? I tried not to make a screen calibrate mode.

  Re views 'mirrored' - I had recently a problem with my Optus Mobile Broadband, which is connected to my PC via a dongle, and the person that I spoke on the phone asked me, and I said yes, although normally I'm not agree to such a thing, remote connect to my PC while we were both on the phone; in other words, a type of Assistance Remote Desktop connection where he was responsible for what was happening on my PC. I could see what he was doing, of course, but not what was going on behind the black screen in the background.

  The program that was used to do this is called LogMeIn, lmi.exe. I have removed this program once we had finished and made sure my Services have been in the appropriate configuration. However, there are now two other installed programs with respect to the service - hwdservice.exe and ouc.exe. And the Optus program is set to automatic in the Services. Previously, it was manual. This has fixed the problem (intermittent network connectivity).

  I wonder if it could have been the cause of this current calibrate display problem.

  I will presume that rebooting the system Safe Mode and clean boot has authorized, on the matter.

  Thank you, Ramesh. Best regards

• DHCP server does not start - the storage control block address is invalid.

  I use a trial version of the Pro Workstation 12.1.1 on Windows 10. I seem to have a strange problem where the DHCP service does not start.

  I tried to go into the virtual network editor and then restore the default settings, which had no effect.

  The event viewer displays the following text:

  CreateFile Version ioctl(): VMnet8 (327680 393216): the operation completed successfully.

  / The storage control block address is invalid

  Checked the service and it runs under a local, verified system account permissions on the config dhcp / rental file in c:\programdata\vmware\ and both have system configured to full control. I tried to run the vmnetdhcp.exe in a command prompt to we hope to get additional information, but cannot be executed directly. I can't figure out how to get out of documented logging dhcp server in order to track down what could be the culprit.

  I tried to uninstall workstation, restart, reinstall, restart both unsuccessfully. I had version 9 workstation that was installed previously, in which the trial upgrade.

  Any suggestion would be appreciated.

  Figured it out.

  It appears during the workstation installation 9, he placed vmnetdhcp and vmnetnat in c:\windows\syswow64 folder. Pro 12 workstation puts these files in the default directory (C:\Program Files (x 86) \VMware\VMware workstation). The service was always pointing to the old location even SysWow64 after an uninstall and reinstall.

  I replaced the files SysWow64 folder workstation and services started right up.

  Checked the work by selecting NAT and gets an IP address from the host machine.

• After you enter a URL and hitting 'ENTER', nothing happens, except if I click on the arrow at the right end of the block URL.

  In the block of the URL, there is an arrow curved to the right end of the block. When I put the cursor in the block in preparation for the opening of a URL, the changes of curved arrow to a right arrow, pointing to the right. After entering the URL and pressing ENTER, nothing happens. If I click on the right arrow, I am taken to the desired site. It started to happen about 2 weeks ago. How can I solve this problem, so that when I hit the Enter key, I am taken to the desired site?

  This problem may be caused by the AVG Safe Search extension.

  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.org/KB/safe+mode

  You can see on the AVG site if there is an update available.

• Some sites say cookies are blocked and I can't use certain features on these sites. But I check every time, and cookies are not blocked.

  Sites to say I can't set preferences or post on the forums, etc. because cookies are blocked. I know how to create cookies. They are NOT blocked.

  Have you checked the cookie for the current domain permissions in "tools > Page Info > Permissions" once you have opened this page?

  If the setting in Firefox is OK, then check your security software (firewall) to ensure cookies aren't blocked here.

• text messages sent with an email address from a touch ipod duplicated on a second ipod touch using a different email address, but the two ipods are controlled by a parent with the same apple ID and password.

  Text messages sent with an email address from a touch ipod duplicated on a second ipod touch using a different email address, but the two ipods are controlled by a parent with the same apple ID and password.  This has happened recently.  My two girls have used their respective ipods and texting, without their messages of duplication for each of the other ipods for more than a year.  Somehow recently, both addresses seem to be synced with them or something, so that both see each and other messages.  I've recently updated two ipods, iTunes on my computer--not the cloud and added music for two ipods, but has not changed anything by email email settings or message I know.  Help, please!

  Welcome to the Apple community.

  I can't fully follow how you have everything set up, but a glance at the settings > messages > send & receive

• Windows Update cannot currently check the updates, because the updates on this computer are controlled by your system administrator

  Error message appears when I try to change the Windows 7 update to automotive preferences, or try to manually get updates of Windows 7.  Using Win 7 Pro 64 bit on a computer at home.  I am the administrator and I can't find any relevant information in help or in a search of the forum.

  "Windows Update cannot currently check for updates because updates on this computer are controlled by your system administrator.

  That's what I get for taking!

  There is a big difference between be connected - one with administrative privileges (see your first post in this thread) and be logged on as administrator, especially in Vista & Win7. See the section "If you need help to determine if your account has administrative credentials...". "here: http://support.microsoft.com/kb/931712 ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• For your security, some settings are controlled by group policy

  I want to install Security Essentials.
  I am running XP HOME Edition Service Pack 3 on 2 computers on a network at home for almost a year. I have One Care. When I start the computer their direct initialization on the desktop.
  I know that I don't have the Group Editor and there is no way to get installed it on XP HOME.
  For the last 2 weeks, when I click on Windows Firewall in Control Panel, on two computers, the settings window appears but there a warning on top "for your security, some settings are controlled by group policy" and the selections are grayed out, and the firewall is disabled.
  I have no firewall problem turn on or turn it off in One Care on computers. I've deleted and reinstalled One Care, and even when One Care is removed on both computers I get the same results with Windows Firewall.
  I even replaced the firewall router had to this router.
  Nothing not done, I ran Rgeg priest and anti-Malware.
  I got a response saying to run "mmc", but nothing happens.
  I even spent 5 hours on 2 days with a care that told Finally I must contact support XP and I have had no reports of them support.
  I tried http://windowsxp.mvps.org/resetfwpol.htmon both computers, the Windows Firewall Branch returns to regedit after a reboot and Windows Firewall is still gray.
  I would like to delete One Care and install Security Essentials, but I fear that I can find with no firewall.
  Help, please!

  Mike,
  Me again!
  I removed One Care on both computers, rebooted, installed MSE, rebooted, did a quick auto scan, showed no problems. The Windows Firewall still has the statement "For your security, some settings are controlled by group policy", but the good news is the firewall is on and I can't turn it works!

  Now I can run chkdsk on both computers.

  The Linksys router has SPI Firewall. Should I so on only the SPI Firewall Windows Firewall?

  Furthermore, I run RegClean once a week. Do I need to continue to operate that?

  Don

• You can help I was looking for a list of program which are controlled by Microsoft?

  Can help you I was looking for a list of program which are controlled by microsoft that run from the microsoft flag and R keys pressed together key. many of then are 8.8.8.8 Ping-t and another is appwiz.cpl

  Windows key + R generates the Run dialog box that allows Windows to run almost any command you can find, the 'list' would be huge.

  In this box, you can type some commands, web addresses, UNC, paths management console scripts and so on. All programs on the computer may be open in the box run, provided that the full path is included or it is in one of the list of path variables.

• HP OfficeJet Pro 8600 more: right margins are ignored

  HP OfficeJet Pro 8600 more

  Windows 7 Pro 64-bit

  The new installation of Win 7 + SP1 + all available updates (this occurs on both this system and on a network XP system)

  The right margins are ignored on all documents sent to the printer.

  Have reinstalled the printer printer twice, without success.

  Printer paper options are set to 'Custom' quality (whatever that means) and plain paper (letter size).

  It doesn't seem to be an option for shrink-to-fit in Outlook 2010, so I bet the problem is a driver conflict. Try using a different driver for the printer. I'll link the instructions below. Let me know what happens.

  How to assign other drivers to print in different Versions of Windows