DHCP server does not start - the storage control block address is invalid.

Similar Questions

• When the Active Server is shut down normally, the passive server does not start the service

  Hi friends,

  I have a question for the vCenter heartbeat,

  When the Active Server is shut down normally, the passive server does not start the service.

  Is this normal?

  Thank you.

  He starts the services on the passive server because the correct judgment still leaves the server active as being the "main".

  Stop all services of it properly. And after it comes back online replication starts as before, so that no service must be started on both servers. (in this case that you will have questions)

  Please note that on a server computer, you have 2 possibilities to "stopping down": the BONE and the option of status and control of the server Vcenter Heartbeat

  See you soon!

• Dell Openmanage 7.4 64-bit on Poweredge 6850 with 2012 Windows Datacenter Server does not recognize the storage controllers

  Hi, masters!

  I installed the package Dell OMSA 7.4 (OM-SrvAdmin-Dell-Web-WINX64-7.4.0-866_A00) on my Poweredge 6850 with Windows Server 2012 - Datacenter. Everything works fine, except for the storage controller. The OMSA displays the message: no storage controller found. Can you help me?
  Thank you

  Diramos

  Hello Diramos,

  That is a difficult question because OMSA stopped supporting older systems of the gen 8 back to 6.x what OMSA 6.5 works with 8 Gen but most customers will find the more stable 5.5 with 8 gen systems.  Now, the other problem is that Sever 2012 is not listed as an operating system supported for Dell 8th gen systems either.  Obviously, it works, since you have it installed, but you may encounter compatibility problems.  Particularly like this this is not a systems management configuration that will work well.

  Windows 2008 R2 work OMSA 6.5.

  Let us know if you have any other questions.

• Wireless Pan DHCP Server will not start... Error: Static Interfaces/Listening Ports not available

  I had trouble not getting no connection with WiFi, after weeks of allsorts following advice on forums etc, I found that the Wireless Pan DHCP Server does not start with error: Static Interfaces/Listening Ports is not available. my understanding is that the ports UDP 67/68, but when I run a Netstat I don't see them in the list. I checked windows firewall and they seem to be set to DHCP.

  Any ideas would be useful.

  Win 7 Home Premium 64 - Bit SP1

  Please post your request here:

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

• Server does not start - works on vista

  My server does not start correctly. It crashed when you perform an automatic update of itunes / real player. When the insafe mode I try to remove the apple programs I get this message: «the instsaller could not access the service windows.» This can happen if the widows Installer is not installed properly.

  Hi John,.

  Since your question involves the use of the server please join the TechNet community for assistance. They specialize in THIS type of environment Pro and will be better suited to help you.

   

  TechNet Forum
  http://social.technet.Microsoft.com/forums/en/w7itprogeneral/threads

• DHCP service does not start after change of vmnetdhcp.conf

  Hello

  My installation includes a host running windows 8.1 pro and guest is an Oracle Linux 6.5 with NAT. As I searched for a static IP address for the comments I went ahead and added the following to the end of vmnetdhcp.conf

  host computer2 {}

  Hardware ethernet 00: 0C: 28:D9:D5:95

  fixed address - 192.168.37.3

  }

  As soon as I try to restart the dhcp service falls down. Even if I just restart machine job changes, the DHCP service does not start. When I do a reset of the network through the network Publisher configuration and simply accept a dynamic allocation of IP address to things normal race comments. The same configuration works fine on Windows 7 Pro host. Any help would be appreciated.

  Hello

  Thank you for using our product.

  I tried the same set upward on Win7 and Win8.1 host, both of them work well.

  So I guess that there is a syntax error when setting up vmnetdhcp.conf.

  Maybe missing ';' at the end of each line?

  An example would be like this:

  host computer2 {}

  Hardware ethernet 00: 0C: 28:D9:D5:95;

  fixed-address 192.168.37.3;

  }

  Please check and try again with kindness.

  Thank you!

• Essbase server does not start

  I 9.3.1 installed essbase version. There was a sudden unknown physical closing down of the computer on which essbase. After that the essbase server does not start. Also I am not able to uninstall essbase. Even when I reinstall the problem remains still.

  So the answer I gave was correct?

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Equium A100-338 does not start the OS Vista - update Bios?

  Hi guys,.

  My laptop (a few months) decided to die and was told by tech support that it might be because of the BIOS. The problem is that the computer does not start the operating system (Vista) and the update of the BIOS available only is the version of windows. Are there any other mirror to get the traditional update or even a way to convert a the update the BIOS from Windows startup disk?

  Thank you

  Hello

  If you can see that one version of BIOS on Toshiba page then only one version exists and is available!

  > The problem is that the computer does not start the Vista operating system
  I don t think that BIOS could be responsible for this problem.

  You must first provide more info on this problem!
  The laptop goes to home Toshiba screen? Have you tried to recover the laptop with the Toshiba Recovery CD?

  Please provide details!

• My acer aspire one does not start. the scrolling windows screen, then screen turns off. logon appears and resets, sys

  My acer aspire one does not start. the scrolling windows screen, then screen turns off. but after a long time (45mins) the login screen appears and d sysytem restarts. I have a multi boot with 2 installations of xp, and this happens with both bones. not able to access my sys to bak - up also. all f8 options were considered, but no use.

  I have some bad sectors on d: (have total 3 drive partitions c:, d:, e: with xp on c: and e :))
  the sys wud show a blue screen and reboot when certain file wud b accessible on d:... now the sys cannot start all... pls help...

  Hi Srimotu,

  ·         You get an error message or an error code?

  ·         Have you made changes on the computer before this problem?

  Follow these methods.

  Method 1: Try starting it in last known good configuration.

  http://support.Microsoft.com/kb/307852

  Method 2: Try to start in safe mode.

  http://support.Microsoft.com/kb/315222

  If you are able to boot into safe mode, try a clean boot.

  http://support.Microsoft.com/kb/310353

  Note: After the clean boot for troubleshooting, return the computer to a Normal startupmode.

  Method 3: Disconnect external devices such as printer, scanner, etc. and try to start.

  Also disable automatic restart in the event of system failure

  http://support.Microsoft.com/kb/307973

• I updated windows 10-level, he wiped my photoshop. downloaded 11 elements, it does not start the installation

  Hello

  I need help! I use photoshop a lot. I started at level 10 windows and it wiped my photoshop. I downloaded again, it does not start the installation. I tried redownloadeding and it says it can not extract it because all the parts aren't there. Would love to be happy again with photoshop.

  Hi Mark,

  You can download Photoshop elements by using the following link: Download Photoshop Elements | 14, 13, 12, 11, 10

  Be sure to download the two files available for download.

  Kind regards
  Rahul

• I installed the new version of LIghtroom (2015) compared to the creative clouds.  Creative cloud said that I installed the new version.  However, the shortcut icon that has been installed does not start the new version.  Also, I went to the link propertie

  I installed the new version of LIghtroom (2015) compared to the creative clouds.  Creative cloud said that I installed the new version.  However, the shortcut icon that has been installed does not start the new version.  I also went on the link properties itself, but without success in starting.  How to launch the new version?

  Thank you, toinimj59.  I did this part and the installation is complete (there is apparently not earlier--included an acceptance of the general terms and conditions...)

  Solution 1: Disconnect from the desktop creative cloud app and reconnect

  1. Disconnect from and to, the app Office creative Cloud click here for instructions to return in
  2. Launch of Lightroom.

• Mail server does not accept the Mails of Log (misuse of SMTP command pipelining)

  Hello

  my mail server does not accept the ghettoVCB Logmails.

  The receiving mail server tells me after:

  503 5.5.0 < DATA >: data command rejected: improper use of the command pipelining SMTP;

  I thought it was related to the "of:" and "to:" after the DATA command, but this comment with a # did not help.

  It will not work unless I call the last restriction of this param...

  smtpd_data_restrictions = reject_multi_recipient_bounce,

  reject_unauth_pipelining

  Is this something that can be fixed in the ghettoVCB script or what I need to with this life?

  So long

  Presssack

  EDIT: My guess is that the script just throws the whole mail on the mail server and do not wait it gets permission to send data part... rude boy!

  Watch the "Email Backup log (LOAD EXPERIMENTAL grip)" part on the project page. Send you a mail server must support SMTP pipelining.

• CS6 does not start, the trial version will open instead of the real version

  After reinstalling my system of time machine cs6 does not start, the trial opens instead. Serial number is not accepted. What should do?

  Hi MFGTG,

  I checked the serial number and found that there is a problem with the serial number.

  I advise you to please call our 800-443-8158 support or start the conversation by clicking the below link

  http://helpx.Adobe.com/contact.html

  Thank you

  Kapil

• Firefox Pei does not start the Profile Manager. Firefox version: 50.0

  Firefox Pei does not start the Profile Manager. Firefox version: 50.0

  Have you tried; Type of topic: profiles in the address bar.

• DataGrid: can I recover the data, BUT it does not show the datagrid control

  Hello

  Hi - I've traced data through php mysql in actionscript but it does not show the datagrid control. Here is my code.

  Import fl.controls.DataGrid;

  Import fl.controls.dataGridClasses.DataGridColumn;

  Import fl.data.DataProvider;

  Import fl.controls.ScrollPolicy;

  Import fl.managers.StyleManager; necessary to format the text in cells

  import flash.display.MovieClip;

  import flash.net.URLRequest;

  import flash.events.Event;

  import flash.events.MouseEvent;

  import flash.net.URLLoader;

  to import flash.net.URLVariables;

  import flash.net.URLRequestMethod;

  import flash.net.URLLoaderDataFormat;

  Create a new instance of the DataGrid component.

  var aDg:DataGrid = new DataGrid();

  var myDp:Array = new Array();

  var myData:URLRequest = new URLRequest ("http://www.cambridgekids.es/kglad/php/getUsers.php");

  myData.method = URLRequestMethod.POST;

  var loader: URLLoader = new URLLoader();

  loader.dataFormat = pouvez;

  loader.addEventListener (Event.COMPLETE, dataOnLoad);

  Loader.Load (mydata);

  function dataOnLoad(evt:Event) {}

  for (var i: uint = 0; i < evt.target.data.cant; i ++) {}

  myDp.push ({number: evt.target.data ["firstname" + i], Apellido:evt.target.data["lastname"+i]});})

  / / trace (evt.target.data ["firstname" + i]);

  }

  myDp.dataProvider = new DataProvider (myDp);

  }

  aDg.dataProvider = new DataProvider (myDp);

  aDg.columns = ['number', 'Apellido'];

  aDg.setSize (800,300);

  aDg.move (150,200);

  aDg.rowHeight = 40; / / allows 2 lines of text in the default text size.

  aDg.columns [0] .width = 80;

  aDg.columns [1] .width = 30;

  aDg.resizableColumns = true;

  aDg.verticalScrollPolicy = ScrollPolicy.AUTO;

  addChild (aDg);

  DOH! I thought I was in the flex forum so ignore my previous answer.

  You must set the dataProvider on the dg after completing the dataprovider with data so spend aDg.dataProvider = new DataProvider (myDp); at the end of the dataOnLoad method