Batch command time-out

Similar Questions

• How to return multiple images using the batch command

  With the help of Fireworks 8.
  
  I have a document with more than 200 executives. In the "Command"-> "Batch commands" menu I have the possibility of rotation and or multiple or individual images blur.
  
  What I would really like to do is to return all 200 images horizontally, but there is no option to do this at the same time.
  
  Or is it?
  
  Tell me that I'm not stuck with the only option of failover each picture individually.
  
  I have knocked down an image and recorded my actions as a command, but this "Flip" command could not be applied to several frames.
  
  Help out me.
  
  Thanx.

  You will need to use the feature to peel the onion of the Panel frames, as
  Alex said.

  Go to the control panel frames. Assign to all managers of onion (the box on the)
  left side of each image - click on the Executive in the area of skin of onion,
  Then click on the lower frame. You will see a line connecting all the
  frames) then click and drag on your entire canvas area to select all
  executives. If you have saved the command, you will find at the bottom of
  the menu of commands.

  This does not work, I just did.

  --
  Jim Babbage-. : Community MX:. &. : Adobe Community Expert:.
  Extend the knowledge, every day
  http://www.communityMX.com/
  CommunityMX - free resources:
  http://www.communitymx.com/free.cfm
  ---
  . : Fireworks adobe community expert:.
  News://forums.Macromedia.com/Macromedia.Fireworks
  News://forums.Macromedia.com/Macromedia.Dreamweaver

  CashComm wrote:
  >

  Quote:
  EDIT > TRANSFORM > FLIP HORIZONTAL. Do it once, then go to history
  > Panel and save a command customized. You have access to the
  > batch operations.
  > However this will affect only the first image of the top layer unless
  > other images or layers are selected manually.
  >

  
  > Thanks for your response Jim. I did everything as you described. I chose fram 1,.
  > so I chose the layer in the fram in the layers panel. I spilled usig
  > CHANGE it, TRANSFORM menu. In the history panel, I saved this command as
  > "FLIP".
  > I have selected 2-10 images, hold down the SHIFT key. Then I went to the
  > Menu command and selected my "FLIP" command and received an error message telling me "
  > that it could not apply.
  > I tried to find out where my Flip order is registered thinking that I'm going in
  > Explorer and drag it to the folder of command Batch that I could use it. But I have
  > could not find my FLIP order, even if it works perfectly if I'm changing
  > fram one at a time and only then if I select the layer in this context first.
  >
  > Apparently recorded commands do not work on several images.
  >
  > So I'm in a situation where I have to use the flip command or CHANGE-->
  > TRANSFORM caraa command on each fram individually.
  >
  > It's frustrating.
  >
  

• Stor.E ALU 2s no time-out

  Hello
  I have several Toshiba USB hard drives, that I use as storage media with a cable TV box.
  Type DTP110 turns off after a few minutes if you do not use.
  Type Stor.E ALU 2s continues to operate. There is no point when not in use.
  Desturbing more however is the squeaking noise when the box is turned off, which cuts the power of the forced HD.
  I sent a request for Toshiba if there is a tool to set the time-out, no response.
  Anyone know a solution?

  See you soon,.
  kyriako.

  Hello

  I don't have a solution for you, but I may be able to enlighten us.
  It is likely that the hard drive does not meet the host power management controls.
  I don't think it's possible to solve by any other piece of software, unless it's an update of the firmware.
  If you want you can chech in running a modern Linux host and attaching this player.
  Run the drives under Gnome application and try to read the SMART attributes and / or request a counters.

  The results it will show the way.
  Success at the point of Linux to a kind of incompatibility between the HARD drive and your device.
  Same result in Linux shows that the HARD drive does not respond to these common commands and there is not much to do about it.

  Tom br

  Post edited by: MannerhagenVPO

• Windows Server 2012 R2 Request Time Out

  I installed Oracle Linux 7 use of Hyper-V on Windows Server 2012 R2. When I connect the Oracle Linux for internet (parameters--> network--> then set the device to run the internet), Oracle Linux takes the entire internet server and also indicates "Request Time Out" while that ping using command line on Windows server.

  Is it possible that I can fix this or can anyone help me solve this problem? Very Important and Urgent. Please help me.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• unlimited time-out, but the idle time-out is 30 minutes per session

  Hi all

  I connect with client Anyconnect for an ASA5510 (8.2.1 (11))

  In group policy, I idle timeout = unlimited, but if I control the session in asdm and the command line

  I find idle timeout = 30 minutes.

  If I insert idle timeout = 60 in politics, in the session I see Idle timeout = 60 min.

  Is only a problem in the visualization of the session?

  Defining the 'vpn-idle-timeout none' group strategy is a misunderstood command. When it is set in group policy, it does not neutralize the idle-timeout. In the past, I filed a bug in order to clarify what this setting (see CSCsm15079) to clarify the misunderstanding. In more recent versions of the code with bug fix, context-sensitive help for command now correctly explained:

  ASA(config-Group-Policy) # vpn - idle - timeout?

  orders/options mode group policy:

  <1-35791394>Number of minutes

  No IPsec VPN: disable the time-out and allow indefinite idling;

  VPN SSL: Use the value by defect-idle-timeout

  When set to none, and you are using SSL VPN, this means that he will inherit the default-timeout defined under the Webvpn config. The default value for this command is 30 minutes, so that's probably why ASDM displays 30 minutes. If you want to adjust this value, it can be changed with:

  conf t

  WebVPN

  by default-idle-timeout

  If you want an 'unlimited' idle time, must be defined the vpn-idle-timeout in group policy for a specific number instead of "none" - the maximum that you can set to the vpn-idle-timeout command is 35791394 minutes (something like ~ 24000 days or essentially unlimited).

  Please note this post and mark it as resolved if he addressed the issue.

• VSA and VSADs not mounted Manager time-out

  I have some problem in my VSA environment. The first problem is that I can't access the Manager of VSA vSphere client. When I click on the tab is present me with a message "loading" red the a 'loading takes longer than expected, if the cluster is on a network reconfiguration mode disconnect and reconnect' and then eventually times out saying "the VSA Cluster is unavailable connection timed out: connect.

  This brings me to my second question, which is the VSADs (two-node cluster) upward as inactive (not mounted) in vCenter. I can't ping the IP mount. However, I can ping the vCenter and two VSA management IP, as well as the IP Address of cluster service. However the management of the cluster (172.16.32.20) and NFS IP are not available.

  I lost power to my lab and things have not stopped correctly. Since I put under tension, it was unavailable. I've included the VSA Manager log.

  It seems to me the IP SAS is not. However, I do not know why?

  Any ideas would be great there are machines that I really want to revisit those NFS mounts.

  Hi Owen,.

  From the description you posted, it seems that either your cluster in maintenance mode or that there is something wrong with the backend network prevents the adjoining VSA VMs between them.

  You can check if the VSA VMS are in maintenance mode by using WSCli and getSvaServerInfo running. To do:

  Open a console session (command prompt) on the server where the VSA Manager is installed.

  Navigate to the directory that contains the file WSCLI.jar (C:\Program Files\VMware\Infrastructure\VSA Manager\tools\).

  Run: java-jar WSCLI.jar getSvaServerInfo

  Check the two VMS VSA. If they are both in maintenance mode, you can get them to come out of maintenance mode by running:

  java-jar WSCLI.jar exitMaintenanceMode

  Check the VMs got out of maintenance mode by running getSvaServerInfo again. With the two VM VSA out of maintenance mode, the address IP of Cluster should appear. Check if the cluster itself is in maintenance mode by running:

  java-jar WSCLI.jar getStorageCluster

  If the cluster is in maintenance mode, you can either take the cluster out of maintenance mode by running:

  java-jar WSCLI.jar exitStorageClusterMaintenanceMode

  Or, at this point, the VSA Manager must be able to connect to the Cluster and you can take the cluster out of maintenance via the user interface mode. Once this is done, your NFS shares must be online.

  In case the system VMs VSA are not in maintenance mode, there is probably a problem preventing the VSA VMs to communicate. Indeed, even if the VSA VMS are in maintenance mode, if there is a network problem, you won't be able to remove them from the maintenance mode. So, if the steps above fail, first step should probably be to check networking (necessity of VMs to communicate on networks of front and background).

• How to adjust the time-out setting?

  I'm in a certain OBIEE in Firefox which, by nature, do not take a long time to run. One of my local Technical Support people suggested increase Firefox's timeout setting (he showed me how to do this once, but I didn't write it). Can you provide instructions written (or annotated images of the screen), please?

  Alright. There are two ways to do this. You can extend your timeout, or you can completely disable timeout. Depending on how you are using firefox, can be useful. If you want to extend your time-out, type about: config in your search bar on the top. From there, need you a list of preferences. There is a search bar. Type "Timeout" in there. The top two are disable the time-out and the 'County timeout'. If you want to disable the timeout, simply double-click the "enabletimeout" on the top. This will change the false value. If you want to change the value of how long it takes to timeout, double-click on the "CountTimeout" and type in your new value. If this is not sensible, see screenshots.

  Have a great day!

  -Jon

• Please can someone help me for a long time out of the payment itun

  Please can someone help me for a long time out of the payment of itun, I lost my phone.

  This is my information

  ****

  ****

  Thank you

  < personal information under the direction of the host >

  OK so tell me first your reason! It of your personal account, why do you give?

• Apple pay will not be set up on my new 6 iPhone.  When I touch the icon 'Add card' the ball turns just until the screen times out.

  Apple pay will not be set up on my new 6 iPhone.  When I touch the icon 'Add card' the ball turns just until the screen times out.

  Hello...

  Force restart your iPhone > press on and hold the Home and Sleep/Wake buttons for at least ten seconds, until you see the Apple logo.

  Then try to add a card again > define and use the Apple pay on your iPhone

  And make sure your bank / card is accepted for use with pay Apple > Apple pay participating banks and store card

• error message "kauth resolver external time out."

  Hello

  Pay my iMac (21.5 inch, end of 2013, 2.7 GHz Intel Core i5 processor) bought with Maverick, I went successively to Yosemite and then to El captain. And since then, I have a problem starting not to power: the progress bar stuck at 60%. Start-up in Verbose mode, I get the message "kauth resolver external time out."

  The only solution is to "turn off, is dry, and tension to under 30." This second time under tension, the mac restarts. A solution that is not terrible.

  I used OnyX, but no verification has failed to solve the problem, everything looks ok.
  Who has a solution pour troubleshoot this problem?

  Thank you for your help.

  I too have this problem sporadically with some of our iMacs us upgrades 10.11.3 (from 10.10).  By chance are your iMacs have records of merger?

• I have an iPod hooked up to a Pioneer AVH-X4700BS 160, and nine times out of ten the iPod reads OK TO DISCONNECT.

  I have an iPod hooked up to a Pioneer AVH-X4700BS 160, and nine times out of ten the iPod reads OK TO DISCONNECT.

  It seems normal. What happen?

• A time-out of the finite queue of wiring allows parallelism?

  I have several loops (11) all running in parallel, set up with a producer--> several consumer-> multiple consumer architecture.

  In each of the loops of consumer, I wired the values of time-out on the order of 1 second each of the vi "remove item" which feed on each loop. However, the overall performance of all vi is very slugish.  I have no expectation s vi in the loops of consumer, I guess the time queue supports this feature and allows labview to work its magic of parallelism. This hypothesis is correct?

  For what it's worth, the loop of the producer bed synchronously large shared memory double paintings representing the acquired data and post processed in RT through virtualization (hypervisor). The loop of producer implements an element of expectation. This loop of producer distributes the data to the various queues, depending on the data type meta code embedded in the data of recevied. Then, first consumer level loops review data, update some PLC tags accordingly (via the datasocket connection) and, under certain conditions, send signals well formatted the next level consumer loops that manages storage PDM.

  Each consumer has a dedicated queue and each of them are powered by several producers to the top of the pipe. I put vi waiting in each loop of consumer with a value of about half of the time waiting for data to arrive, and it did not help at all. However, the problem has been resolved by configuring the properties of execution of almost all under vi as priority of subroutine, returning with dedicated allocation of memory. I know it's basic stuff that I should have checked before hand, but everything works fine now.

  Thanks for the help anyway!

• Time-out in the structure of the event

  Hello

  I try to configure the time-out period in the structure of the 5s event using the loop, as shown in the picture as an attachment. The problem is that this time-out event occurred only when I code debugging and does not happen when I run the same without debugging. Any suggestions on this?

  Thank you!

  OK, just use VISA Read to read the first three octets.  Then do another set VISA Read the number of bytes defined in dlen.  If the data does not, then you will get a VISA expiration time.

  

• smart camera of the trigger of the time-out value of the error - VBAI 3.6

  Hello that tal?, el tema are that I have a problem with the Smart camera're tengo una fotocelula conectada has the patilla of trigger and (2), el u Trigger-(12) masa in las patillas del conector DB15 of the smart camera para as cuando PASE una pieza realice the fotografia. The cuestion are el solo time-out error me already poner 60000 ms, y for example, so una pieza soon en pasar 60000 ms en el paso of the closing of imagen mas me pone time-out error, y sigue por el diagrama of blocking como if would Fall the imagen. In principio imported me that salga el time-out error, pero me gustaria that esperase has the following pieza sin avanzar por el diagrama of blocking, not so to me explico very well.

  If alguien tiene alguna idea como el problama delivery could be lo agradeceria mucho.

  Cordially, is muchas gracias of photos. David.

  Hey David,

  entonces Perfecto. If the respond you vale marcala como tal in el foro o con UN kudo en knew defecto para as other users themselves can the answer is beneficiar.

  Duro con ello!

  Jesus.

• VISA Read.vi time-out

  Hello

  Recently I happened to use Labview drivers of NewPort (ESP301) and Lakeshore (Lsci218) and I encountered the same problem of "time out" every time that a Subvi driver called VISA Read.vi for serial communication.

  I first thought has problems with driver Labview provided by the manufacturers, but after trying the pilot different LV from different companies, I started to think that the problem might be the Read.vi VISA itself.

  I use LV2010-spring, also tested with LV2011SP1. Both give the same timeout problem.

  I asked businesses about the problem, they have not found answers, nor they have LV2010 or LV2011.

  Someone had the same problem?

  Screw joint are FYI for what I tested.

  'test initialize.vi 218' is 218 Lakeshore pilot, with a change of the addition of "\r\n" in the "* IDN? the Subvi called VISA Read.vi. and a timeout error.

  "test initialize 218 - md2.vi ' has the same function, but call VISAWriteRead.vi instead of VISA Read.vi. and works OK.

  How can I know that the VISA Read.vi in LV2010 or LV2011 works correctly? or can I replace the VISA Read.vi with LV8.6 one?

  It seems to me that Newport and pilot LV lakeshore have been developed under version LV does not exceed 8.6. and I think that they tried their driver before release or I hope.

  any suggestion is appreciated.

  Xiaofeng

  The version of LabVIEW is not relevant.

  In the read/write, you add the LF/CR. In the other, you add CR/LF.

  Avoid platform dependent end consistent line in the communication of the instrument.