Series Tecra S2 and RS232 in MS/DOS

Similar Questions

• Tecra 9100 and compatibility with 32-bit/3, 3V PC Cards (PCMCIA)?

  I would like to increase the power of my WIFI.

  The internal card supports 802.11 a standard only.

  The Tecra 9100 Series is compatible with 32-bit/3, 3V-PCMCIA cards?

  Hello

  According to the specifications of the computer laptop Tecra 9100 is ready WLAN and can be upgraded with standard Wi - Fi 802. 11B. I have the same WLAN card on my Tecra M1 and I'm really happy. You can buy the Wireless (PA3189U-1MPC) recommended LAN card and like to be mobile. The transfer of data is OK and you don't need a better card for this good old classic.

  It is an old map and it won't be cheap. Check it out.

• Tecra A4 and Win7 - problems with PCMCIA card driver

  I've recently updated my old laptop Tecra A4 - PTA42E - (in great condition however) for Windows 7 and it is now in the best shape ever except for the PCMCIA card. In fact, to have Windows 7 installed I had to rename the pcmcia.sys and pcmcia.inf files during the installation (to .old or .bak) otherwise the new operating system would not start. The same problem has been experienced by many other users Tecra A4 and the solution is available in a number of forums.

  Although I use no more than the PCMCIA card slot, I want to fix this for a reason: If, in the future, I need to re - install Windows 7 for some reason any on this laptop, I have to repeat the same process - rename the pcmcia.sys and pcmcia.inf during installation, in addition, the new operating system does not start.

  I do not understand that the original drivers from the card slot (Texas Instruments PCI-xx21/xx11 CardBus Controller with UltraMedia) are not compatible with Windows 7, but it is there any updated driver that works for windows 7? And if there's a how can I replace the old drivers in my system so that in the event of re - install Windows 7 I will not have to go through the same process? TI site is no help, and Toshiba does not all drivers to download.

  Last but not least, if there is a driver available, I used the card slot for 2 ports USB 2 or 3 additional which are really necessary.

  Thanks to the forum, in advance

  Hello

  The pcmcia.sys and pcmcia.inf files are part of the Windows System.
  This driver isn't provided by laptop manufacturer, but it is a Microsoft internal driver.

  You mentioned that the pilots of the original card slot Texas Instruments PCI-xx21/xx11 CardBus Controller with UltraMedia) are not compatible with Windows 7.

  To my knowledge, this driver does control not the PCMCIA location but this driver controls the card reader that supports the MMC card, SD card, card xd picture card, SM card, Memory Stick and Memory Stick Pro.

  However, the Tecra A4 is very old model of laptop. The driver will not be updated for this camera and it looks like Windows 7 drivers never had to be released the driver Toshiba UE

• Tecra M9 and compitable motherboards

  Good day to all
  My Toshiba laptop Tecra M9 PTM91E - 12R features of a faulty video card.
  I replaced this card many times, but it's always get bad after a while.
  My repair shop of my recommended to replace its motherboard in order to get a solution permanent.

  I'm not sure if I am looking for motherboards Compitable with my product

  Can someone tell me please with PART NUMBERS of SPECIFICATIONS AND motherboards that I can buy?

  Thanks in advance for your support

  > Any can advise me please with PART NUMBERS, specifications AND motherboards that I can buy?
  Hmmmm... It is not as easy as you think. Defective parts will be exchanged on mobile units with only identical hardware components. It's a completely different situation than on desktop systems.

  You can visit the nearest Toshiba service provider and ask for help, but you will see that they will not be able to help you.
  Fact is that Tecra M9 was offered with two hardware platforms. PTM90E and your PTM91E.

  In the end, I must say it's really strange that you have an ongoing problem with GPU defective. When everything is changed on professional way and you take care of the machine and don't forget laptop is cooled properly I don t see the reason why it should be defective over and over again.

  For 3 years I have Tecra A11 and use almost every day for my small business and there is no problem at all. OK I use for typical every day activities such as web or MS Office and not for games or other graphics intensive applications.

  Try to contact Toshiba service provider in your country and ask for advice. They should have access to the material database of Toshiba and maybe they have good advice for you.

  If possible, send feedback.

• Difference between Tecra M10 and Tecra A10

  Dear forum
  The above says everything really.

  I see the two look identical, but one is smaller. These two models are different in other ways please.
  Ian

  Of course, the two laptops are different.
  There are different models Tecra A10 and there are different units Tecra M10.

  For example:
  Tecra * A10-13 b * supports Intel GM45 chipset and an Intel Core 2 Duo P8400 2.26 GHz CPU.

  Tecra * A10 - 1 2 * supports an Intel Core 2 Duo T9600 2.80 Ghz CPU Intel GM45 chipset

  You can find details of different laptop models left here:
  http://www.Toshiba.EU/discontinued-products/
  Then, you can compare all the pieces of hardware.

• No sound with Tecra A9 and Windows 7

  Hello

  I just installed Windows 7 on my Tecra A9 and now: no sound. I ' v installed all the latest drivers but nothing to do: no sound.
  Does anyone have the same problem? And especially have solved?

  Thanks for your help.

  PS: The mute off the coast of the working tools doesn't work with Tecra A9 (is there an update?)

  Hello

  > I've tried the mute off tool, but it is not compatible with Tecra A9
  You need to install the VAP (Toshiba Value Package utility added) before using this tool!

  Check again!

• Tecra M9 and M10 wheel Volume does not not under Vista

  Hello

  I hope that someone can help me, I'm Vista using Microsoft Deployment Workbench deployment for Tecra M9 and M10 material and the volume knob will not work. I added the drivers of Toshiba in Deployment Workbench, while they are presented the machines via Plug n Play, volume button do not work. I also deleted the drivers of Deployment Workbench and installed the drivers manually on the machines, this installs fine, but volume knob will not work. I have two development servers, Win Server 2003 and Win Server 2008, the two do not run successfully the pilot slots.

  If I deploy a standard Win Vista Enterrprise 32 bit OS of DVD hardware, with any driver when it is installed, the volume wheel works. I can then manually install the audio driver and the volume button still works. But if I deploy the same exact DVD based OS of Deployment Workbench, the volume knob does not work?

  Any help would be greatly appreciated, as this is doing my head and holding up the deployment of the new image.

  Thank you
  Paul

  Maybe you are trying to install the driver Audio of M9 M10 or vice versa?

  You install the driver Chipset Intel and value-added package first? (this is important)

• Re: Tecra S10 and S11 freeze randomly

  We have several Tecra S10 and S11. Freezing randomly during the day. Some even twice within half an hour, others spread it throughout the day.

  The Tecra is all Windows 7. Some have 64 bit, others a 32-bit installation. After installation of Windows 7, we have removed additional software we don't need, like McAfee, Toshiba goodies (Assist, Tempro, etc.), Ebay, etc. After that we activatie Office 2007 and Microsoft put updated laptops. So far so good.

  However, after a week or two just work in Word causes the Tecra to freeze. Same ctrl + alt + delete does not work. The Tecra should be forced to turn off the power, press and hold the power button.

  Everyone recognizes these "frozen moments". It's very annoying.

  It is not easy to say why this is happening.
  Always it is that Office is preinstalled on almost all laptops Toshiba so I did not thing your laptops can be somewhat different.

  Maybe something else responsible for this?
  Maybe are all connected to your business LAN and there is a problem.
  Are connected external devices which can be responsible for this?
  Maybe some internal software of the company is blocking something.

  It is not easy to say what he can be.

  Have you done tests in the past to see what can be the problem?

• Daily series VS Performance and entertainment?

  HP has desktop computers in the "Everyday Computing" and "Performance and Enterment" series.

  I adapted a desktop computer in both series.  For the series of performance and Entertainment Office, you get more choice of components.

  However, the components that I need are available for both series.

  In addition, desktop computers has the same motherboard.

  If desktop computers have been adapted with the same components, wouldn't they have the same performance?

  I understand what you ask because I did the same thing and had the same questions.  The answer is Yes.

  But there are other differences between the two lines, in addition to the customizable options of cpu, ram, disk hard size and chip/card graphic.  Click the tab of the sheet and you'll see different chassis sizes, sizes of power, a different number of slots, etc.

  The series 'Performance and play' has a more robust architecture and is easier to add updates in the future, as the media platforms continue to evolve.  Also gives you a little more space inside to work with.

  I hope this helps.

• Problem starting with the Tecra A8 and A9 models

  We have about 20 or more, A8 and A9 Tecra notebooks and each has shown signs of the same problem again. If rebotting and netwrok cable is attached, so they will not start. Remove the cable and it is a normal startup.
  The A8 has a motherboard replacement (problem existed before the replacement) and is still there now after the replacement. The MB is replaced mainly because the sound card was dead. All machines are running XP Pro OS. The A9 is a novelty. Would be - this driver issue or - this one of my favorite - an update from MS that has caused problems.

  > If reboot and the cable network is connected, then they will not start. Remove the cable and it is a normal startup.

  Hmm that's strange.
  However, I recommend that you check the BIOS settings, please ensure that LAN is not set as first boot device.
  Also check if the BIOS has been updated to the State

  Sorry, but this is really rare and you should try universal workaround solutions that could help resolve this problem.

• TECRA S3 and OS support

  Welcome!

  I would like to share with you how not flexible is Toshiba Tecra S3. My problems:
  1. very low compatibility of utilities Toshiba for Windows 2003 - now don't save uilities which cannot install on Windows 2003 mobile extensions no brightness toshiba functions available.
  2. no software disk for Windows 2000 HARD shock protection.
  3. no software support email contact I can't write any complaints about drivers - only service supported hardware
  4.I supposed to serve this "business machine" portable machine in developing countries - but there is a pilot very low support for other platforms Windows than Windows XP. Laptops are not only office or media players text editors, but has power of desktop PC so please improve OS support in drivers Toshiba.
  5. manufacturers like Marvel or Intel support their chipsets for Windows 2003 with no problems.

  Hello

  Well, one of my friends has a Tecra S3 and he is very satisfied with this unit.
  As far as I know, this device was shipped with Windows XP and all the drivers are available for this device. Drivers Toshiba designed for common OS as W2k, XP.
  If you want to use specific tools and utilities, so you have to use this OS. It of a just done. Mobile computer technology is very different and delicate as a desktop PC. Of course, you can use another OS, but if you can't wait to use special tools.

  For example: mobile video graphics technology is not the same! It of very difficult to get the best graphics performance without high temperatures and overheating problems. In this case the graphics driver Toshiba has an overheating protection. NVIDIA or another s manufacturer drivers doesn t have that option because they designed the drivers for desktop PC not for laptops.

  Toshiba sells many different laptops with different hardware compatibility models. So if you are not able to find the drivers for this laptop, then you should try check the drivers for the other phones with the same hardware devices.

  PS: About Toshiba contact:
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=00000000a2

  Concerning

• Tecra a5 and beeps...

  Hello

  I have several Tecra A5 and one of them started to beep when turned on. It emits 3 beeps, and then a break, then 4 times, then pause and finally another 3 times. I know these mean something, but have sought a solution and high and low.
  Any help would be appreciated.

  See you soon

  Hello

  I'm curious to know how the machine works, so that in this case and thereafter? Normal?
  Normally, this would indicate a serious problem with the hardware and also stop the machine to work at all.

  Check that you have installed RAM additional - If Yes, please remove it and reuse the machne.
  In the end, you might have to get in touch with an ASP.

  BR

  Tom

• Tecra 8200 and Win Xp

  Hello

  I just installed WinXp on my Tecra, because I was not able to use an external USB HARD drive. So far so good
  but now, I have some problems with my wireless card und the notebokk tells me every time you start, I need "Toshiba common Module" for my select bay.
  Someone at - he of the experience with a Tecra 8220 and WinXP.
  Thanks for your help.

  Blunma

  Sorry for my writing is not very well English, my normally preferred language is German. So long.

  Some information more than my Tecra 8200:
  -PIII 850
  -384 MB of Ram
  -Windows XP SP1 (I don't have confidence in SP2 so far.)
  -Installation of WinXP was an update on Windows 2000 SP4

  Hi Mario

  I guess you need the common Modules. It is a special Toshiba driver you have to install first.
  This driver, you can find on the delivered tools & utility CD or on the official website of Toshiba. Note: There are different drivers for Xp or Win2000.

  Good bye

• I got Pro 8.0 on an old computer.  tried to install pto 8.1 using only series. as old and it did not work.  where can I find pro 8.0 or where can I find the correct SN?

  I got Pro 8.0 on an old computer.  tried to install pto 8.1 using only series. as old and it did not work.  where can I find pro 8.0 or where can I find the correct SN?

  If you do not need acrobat 8 pro or something another link below, you will need to explain.
  

  
  

  Available downloadable Setup files:

  • Suites and programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: DC | XI, X | 9,8 | 9 standard
  • First Elements: 13 | 12 | 11, 10 | 9, 8, 7
  • Photoshop Elements: 10, 11, 12, 13. 9,8,7
  • Lightroom: 6| 5.7.1| 5 | 4 | 3 | 2.7 (win),2.7 (mac)
  • Captivate: 8 | 7 | 6 | 5
  • Contribute: CS5 | CS4, CS3

  Download and installation help links Adobe

  Download and installation to Prodesigntools help links are located on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions". window using the Lightroom 3 link to see these "important Instructions".

• Tecra S1 and drive external hard usb 2.0 are supported in the BACK

  I use Norton Ghost 2003 and Maxtor 200 GB USB 2.0 external drive to store my image.

  I need boot BACK to start from floppy or cd and recognize my external drive before restoring my image with ghost.

  My Tecra S1 use bios 2.40 and my external drive is not recognized under dos.

  Other mobile third-party, everything works fine.

  In this forum, someone else has the same problem.

  Anyone can help us?

  Thanks in advance

  Gaetan

  Hello

  Maybe this helps you, the Tecra S1 has an Intel 855 PM chipset.

  If you google around you can find a BACK based USB driver and storage of mass for your chipset.

  Bye Bob