How to adjust the time-out setting?

Similar Questions

• How to change the time-out setting

  Hi all
  
  IM new to oracle10g. We use Server 10g 2 version. We have a report that runs for more than 5 minutes. After 5 minutes, the time-out error message is displayed. How to avoid this problem. I gave the value of forms_timeout 1400 in default.env. Even after that, im getting the same message. Is there something else to do to avoid this error in time-out?
  
  Below the message after 5 minutes.
  
  Explanation: the request expired before the page could be found. *
  
  
  Try this:*.
  
  Refresh page: search for the page again by clicking the Refresh button. This may have been a mistake for a moment. *
  
  If you are still not able to view the requested page, try contacting your administrator or your Helpdesk. *
  
  
  
  
  Technical (for support staff) information*.
  
  Error code 1460: Timeout*.
  
  Background: the gateway could not receive a timely response on the site you are trying to access, a DNS server, or another gateway server. This might indicate that the network is congested, or that the site is experiencing technical difficulties. *
  
  
  Thanks in advance
  Robet

  I don't think that this forms_timeout applies here, as it should be an HTTP request and forms_timeout has nothing to do with it.
  Check the file httpd.conf of your apache located in $ORACLE_HOME/apache/apache/conf for the TimeOut directive. The default value is 300 seconds which would be your 5 minutes, then perhaps assigning a higher value should do the job.

  But a report that lasts more than 5 minutes? Isn't it a little longer? If I was a user who runs this report would probably cancel the execution, as if I have to wait longer than 5 minutes for my desired output I'm sure I want to cancel it, as I suspect that it is more. I am looking for the cause of this; Maybe you have a plan of bad execution of your report, or maybe you need to redraw your sql to run faster...

  concerning

• How to change the time-out settings in Analytic Provider Services...

  ... or how disable automatic lack of coincidence between APS and essbase Server (using XMLA interface).
  
  First a brief summary:
  
  We use a third-party product to analyze data (from Bissantz DeltaMaster). This product uses the XMLA interface provided by Analytic Provider Services. Especially the work of connection, I can choose one of our cubes, sometimes a zoom is possible, but sometimes the following error occurs:
  
  "Microsoft.AnalysisServices.AdomdClient.AdomdErrorResponseException: (1042006): error network [10061] unable to connect to [entwgdw.hres.de:33769]." The customer has timed out waiting to connect to the Agent of Essbase using the TCP/IP protocol. Check the youer network connections. Please also make sure that the values of server and Port are correct [...] »
  
  I already spoke with the support of Bissantz regarding this issue and the recommended increase me APS time-out settings or disable automatic lack of coincidence between APS and essbase server after each query.
  
  The question is: is it possible and if yes: how and where can I change these settings?
  
  Kind regards
  André

  user10660408 wrote:
  All in your above response olap.* parameters are already defined in the file essbase.properties - which doesn't seem to be the problem.

  Yes, they are already set by default, but you can increase them if you wish.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Why my pc tells me network timeout errors occurred during the download of update itunes? How to change the time-out settings?

  I can download but when it comes to treatment of file I have error 3259. network time out

  Read article from Apple about the error 3259
  iTunes Store report error - 3259

  http://support.Apple.com/kb/TS2799

  Thank you

• How to add the time-out explicit?

  In my load test script, I want to add an explicit delay between 2 markets. For example, the script should always take a break of 60 seconds between step 1 and step 2. This time-out period is different from the user think that the time and must be unchanged, so I can't use think(). There is another function that is paused the script for a pre-defined period?

  Hi MingyuCheung,

  Please try to use delay().

  Kind regards
  Anand

• How to increase the time-out value for more than 15 seconds?

  Find a web page expires at 15 seconds. I want to set the timeout for a longer period of time. I don't find a place to do this in the Options. When I go to full pages, I want to continue to try more rather than keep hitting the Try Again button.

  The parameter for which is not in Firefox, it must be changed in Windows.

  http://drewthaler.blogspot.com/2005/09/changing-DNS-query-timeout-in-Windows.html

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\DNSQueryTimeouts
  Multiple string: '0 1 2 2 4 8'-> "4 8 8 16 32 0".

• How to reset the time in the lower right corner, so it remains set automatically

  original title: Windows Internet Explorer 8 - time

  How to reset the time in the lower right corner, so it is set automatically.

  ccrow

  The time is not defined in Internet Explorer. The time is a function of the o/s. right click on the time and see what happens.

• The operation of e/s specified on Device\Harddisk2\DR4 was not completed before the expiry of the time-out period

  The operation of e/s specified on Device\Harddisk2\DR4 was not completed before the expiry of the time-out period

  I did no changes on my computer for functionality, commissioning due to above mentioned problem goes & long

  Hi KarlMaskery,

  1. When you receive the error message?

  2. you have any external hard drive connected to the computer?

  3. do you have security software installed on the computer?

  4 when was the last time it was working fine?

  It is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you put the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

• Reset the time-out without clicks or the keyboard input

  Hey all,.
  SO, I have a RFID reader that triggers events in a film's Director. My timeout is set to 2 minutes, but it is possible for the user to never touch the keyboard or touch screen and always in interaction with the program through the RFID interface. How can I reset the timer of the time-out for the program don't timeout in the middle of the activity of the user. I can't find anything in the documentation that says, although it seems that there should be a property that I could put everything back to 0. Like countDownTime or something like that. Any ideas?
  
  -Bruce

  > it seems there should be some
  > property that I could just reset to 0.

  If you use the ' timeout' Manager (and setting of the)
  timeoutLength), try to reset 'timeoutLapsed' to zero when you need to.

• How to adjust the number of rings on 6s before answering iPhone begins

  How to adjust the number of rings on iPhone 6s before the beginning of voicemail?

  Contact your operator. That is controlled by them. It is not based on the number of rings, it is based on time.

• How to make the button to set the properties of auto-scale one of the Axes on the graphical indicator so I can turn on or off when I press on it. In the Labview web UI designer

  How to make the button to set the properties of auto-scale one of the Axes on the graphical indicator so I can turn on or off when I press on it.

  I need to change the adjustment vaguely Autoscale property for my graphic indicator. Can someone help me please.

  Thank you!

  Hello

  I have confirmed that there is currently no way programmatically enable/disable autoscaling for axes on the LabVIEW graphical indicator generator of the user Web interface. We noted this to possibly be implemented in the future; Sorry for the inconvenience.

• How to view the "timer" current user time

  Hello

  How to display the "timer" right now?

  Currently I have in my program using timer, how to display the current time left on the timer to warn the user the time left on the timer?

  The number of timer upward or the countdown?

  using TimerCB

  a Council does

  Thank you

  Ben

  I'm not aware of the possibility of obtaining the hour up to what a timer callback will be called, then I would say a different approach:

  If, say, you want some action to happen every 10 minutes, but I would like to update the user interface of every second indicating the remaining time I would set the timer to 1 s interval. In the reminder of the timer, I would use a setting that is incremented each time the callback is called; If this value reaches 60 x 10 I reset the parameter and call the function to get the job done. In all other cases, you can simply view 600 - setting (in seconds) than the rest of the time.

  An alternative may be to use two counters, one for the action, called every 10 minutes, and one for the update of the UI, called say every second...

• How to adjust the brightness of the screen

  original title: brihtness XP

  How to adjust the brighteness on my monitor of the monitior does not work, I tried display, setting there is nothing to Brightness.Thanks

  Daisy

  Wednesday, May 23, 2012 11:40:30 + 0000, daisy.s wrote:

  How to adjust the brighteness on my monitor of the monitior does not work, I tried display, setting there is nothing to Brightness.Thanks

  The brightness of the screen is normally something on your
  Monitor itself, not Windows. See the documentation of your
  instructor about how to proceed.

  Ken Blake, Microsoft MVP

• How to change the time before my computer goes to sleep when I type?

  Help

  Hello

  See the guide below on setting the time "Sleep".

  http://thecustomizewindows.com/2011/01/change-the-time-before-your-PC-goes-to-standby-in-Windows-7/

  You may also need to adjust the time before the screen saver of the cuts - if you do, see the following topics.

  Open windows control panel, open personalization, click on the link of the screensaver on the bottom right and in the next window, adjust the time of "Wait" to a more acceptable figure – also, if you don't want to log-in after the screensaver, Remove the tick from the box "in»the logon screen curriculum vitae  Click on apply, then Ok to save the settings.

  Kind regards

  DP - K

• My Windows Photo Gallery has incorrect time for good that my computer is correct. I know how to change the time, but wanted the exact time is displayed automatically when you scan photos etc as before.

  Time is incorrect in Windows Photo Gallery and I would like to do this automatically scanned early for photos instead of my change time.

  Hi Sardai,

  Unfortunately, this information is not always accurate. If you took some of your pictures in a different time zone, for example, the time recorded for these pictures could be incorrect by several hours. The camera can also be set to the wrong date and time. Or, if you're scanning photos, ta date will reflect the date that they have been digitized, not the date on which they were taken. All these anomalies can be adjusted manually.

  To change the date or time

  1. open Windows Photo Gallery by clicking on the Start button, all programs, and then clicking Windows Photo Gallery.

  2. If you do not see the details on the side of the window pane, click information on the toolbar to display it.

  3. click on the image you want to change.

  1. to select more than one picture, hold down the CTRL and click each picture you want to change.

  4. click on the date at the top of the details pane.

  5. click on the arrow next to the date and then click the correct date on the calendar.

  6. click on the time at the top of the details pane.

  7. Select the correct time.

   

  To adjust the time for pictures taken in a different time zone

  1. open Windows Photo Gallery by clicking on the Start button, all programs, and then clicking Windows Photo Gallery.

  2. right click on the image you want to change and then click on change time taken.

  To select more than one picture, hold down the CTRL and click each picture you want to change, and then click a picture when you are done.

  3. in the change to box, type the number of hours to change, or click the up or down arrow to select the number of hours. To make the new start time, type a minus sign (-) before the number.

  For more information, see the link below:

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-the-date-and-time-a-picture-was-taken

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.