Batch file to start and stop

Similar Questions

• Long start and stop times, offline files

  Systems Windows Vista, Windows 8 server, roaming profiles, Outlook using POP3 Microsoft DPM.  local copies of offline files are set to encrypt.

  Because of past problems with several revisions of files group policy is set to synchronize the start and stop.
  Users are complaining of delays and slow performance during periods of start-up and shutdown.  I suspect that this is because of the synchronization.
  What is available to speed up the synchronization process or to monitor the total size and the speed of the process?

  Server gurus hang out in Windows Server support forums, better to ask this kind of question it:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• How to create services start and stop the script of automation for different servers

  Hi all
  
  I want to create a file bat for automation object, start and stop services
  I have some services in 1 server and a server in 2nd and some servers in 3rd.
  has you all know that I have to follow the sequence to start and stop services can all help me in creating .bat combining 3 servers fo start and collapses of the services.
  
  Thanks in advance
  
  Concerning
  SM

  the location of your batch file should not matter

• Complete noob - would like to measure the voltage to manual start and stop

  Hello

  As the topic says I'm a complete noob when it comes to programming OR.

  I'm looking for someone to point me in the right direction

  Installation program:

  Windows8 office

  Visual Studio 2013

  NI 6255 PCI data acquisition card

  Block connection OR SCB-68

  What I want to do:

  I want to write a console application to measure the voltage on the signal ai16

  -I want to be able to start and stop the application manually

  -I want to be able to pressure measured in a CSV output.

  Where I am:

  I compiled and ran the example "NOR-DAQ\Examples\DAQmx ANSI C\Analog In\Measure voltage.

  It is said that I have "collected" samples but I don't know what that means, as I do not see an output file...

  What I don't understand:

  Samples - I do not understand cela or know even where to start

  How can output file - I get the file to save the collected data.

  Thanks in advance

  Chad

  Hi Arron

  Thanks for the link, unfortunately, it has not helped because the instructions were for Visual Basic and C++ not. It was my fault for not putting the language of prog that I need help in my original post.

  However, I started to find help on this link: http://www.ni.com/tutorial/5409/en/

  -With the help of NOR-DAQmx in text based programming environments

• Start and stop a loop automatically subtracted at each iteration

  Hello

  I know that there are some topics about this, but I couldn't find any solution, especially because I'm using version 7.1 and cannot open files from new version.

  My problem is the following:

  I need to load a tank of 6 to 10 in the morning, every day for 3 days. The process should start and stop automatically, which means, no funds to start or stop. Start and stop conditions come from time.

  I start with a big loop of 72 iterations, which is 72 hours.

  The tank must start at level 6, whenever he starts.

  After the departure, 1 unit must be subtracted to each iteration. That means, that the tank is level 10, at 06:00 07:00 level 9 and so on. At the end of the day, at 10:00 the fill level is equal to 2.

  The next day, the process must start again and the tank must start at level 6.

  Any suggestions? Thanks in advance.

  Hi Florian.

  Thank you for your message. That solved this problem, but in fact my VI did not work as I wanted.

  I created a new one, with and an external file from 1 to 24, repeat 3 times. Now I got it. Maybe there is a better way to do it, but it works now. Thanks for all the help. I appreciate a lot.

• Start and stop problems under Vista

  My PC has started taking much time to stop and start.  I didn't install something again and stopped all my programs auto starting but always start and stop takes forever. Can help in any...

  Hello

  Make sure you have the services Superfetch and ReadyBoost are running and then try to speed up the boot with the help of my guide [1]. This causes the prefetcher in Windows Vista. This increase startup performance a lot. All other tweaking tools are useless. Use this method only with the Microsoft Toolkit.

  If it is not to speed up the startup process, follow my guide [2] to start track and to compress theboot_BASE + CSWITCH + DRIVERS + POWER_1.etl as RAR or 7z, also make a trace of the judgment and compress theshutdown_BASE + CSWITCH + DRIVERS + POWER_1.etl too and download the 2 files zip on your Skydrive [3] and post the link here.

  I take a look at the trace, maybe I see what's wrong with your Windows.

  André

  [1] http://www.msfn.org/board/index.php?showtopic=140262
  [2] http://www.msfn.org/board/index.php?showtopic=140247
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02db-4665-993a-08d865088d65 [3] "a programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• Any script to start and stop essbase on Unix?

  I am trying to automate the starting and stop all services in a batch scripts. but my essbase is UNIX. I don't have much exp on Unix. can someone help me please to who?

  If you are closing services, you can use maxl like I said of the windows machine.

  To call a script at startup of windows, then you will need to study a little more maybe cygwin openssh, Rexec, telnet... Google is your friend.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• iOS 10 times to start and stop the music messed up

  I'm running a SE 64 GB iPhone with iOS 10. Many songs from my iTunes library has some moments of power, but after update, they are all mixed. Songs don't start or stop when they're supposed to, or they're going to start and stop at a random time, which is annoying. The same problem was in the beta, causing me to backup on iOS 9. I assumed that this bug would be fixed in the final version. All the solutions in addition to remove and re - download my library?

  Hello Carnage1215,

  Thank you for reaching out to the Community Support from Apple. I understand your music has had some problems and I want to help him. By the sounds of things that your songs start may be delayed or in the middle of the piece, is that correct?

  Before you make too much trouble shooting, it's a good idea to make a backup of your iPhone If you don't have it already. If you do not know how to save your phone from this article will guide you in the process: the backup of your iPhone, iPad and iPod touch

  Once you have made a backup, I would recommend to reset all the settings on your iPhone. This will ensure that all old data of a version of iOS parameter are removed and reset default. This removes all data and applications, photos or contacts, but it removes all of your preferences for the Wi - Fi, Bluetooth, do not disturb, Notifications, general, sounds, contact ID, brightness & paper painted and privacy, then you may need to define these things upwards after this reset.

  Do this please go to settings > general > reset > reset all settings.

  If you always use the same behavior after you restart your phone, please inform the community. We are all here to help.
  Best regards.

• My Mac Mini is extremely slow and any video will start but soon stops and intermittently starts and stop immediately. What is the reason?

  My Mac Mini (end 2012) 2.5 ghz memory 8 GB Yosemite 10.10.5 is extremely slow. I read a few articles on communities, but unable to solve the problem. I plan to upgrade memory soon. In addition, a video game doesn't quite work. It starts and stops in 5 seconds and restarts it for a few seconds and stops completely. An advisor to fix the problem will be appreciated.

  When you see a beachball cursor or the slowness is particularly bad, note the exact time: hour, minute, second.

  These must be run as administrator. If you have only one user account, you are the administrator.

  Run the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  The title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  Each message in the journal begins with the date and time when it was entered. Highlight date back to the time you noted above.

  Select the messages entered since then until the end of the episode, or until they begin to repeat, whichever comes first.

  Copy messages to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost all this is useless to solve any particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name, may appear in the log. Anonymize before posting.

  When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• My navigation bar has been accidentally closed (file, tools, refresh, and stop buttons, address bar, etc.) and now I can't get it back. I tried pressing F11 as someone suggested, but nothing happened. Please notify.

  My navigation bar has been accidentally closed (file, tools, refresh, and stop buttons, address bar, etc.) and now I can't get it back. I tried pressing F11 as someone suggested, but nothing happened. Please notify.

  Use the ALT key on the keyboard if you can't see the menu bar, then

  • View-> toolbars-> and select'Navigation bar tools "(and the Bar Menu)
  • See the Navigation buttons such as back, home, bookmarks and recharge are missing

• Satellite A200-1FL: cooler starts and stops every minute only with battery

  Hello.

  I just bought an A200-1FL and I test these days. I noticed that the cooler starts and stops every minute about when I use it only with the battery.

  Disconnected from the power, even if I do not have too much, just browse the Internet. Is this normal?

  If I work with trendy food, the cooler makes no noise.

  Thank you.

  David

  Hello David

  Do you also have it tested with different profiles in power options (balanced, power saver, high performance)?

• I want cRIO to start and stop the acquisition by push physical button on the cRIO, is this possible?

  When you use my cRIO 9024 on the ground, I prefer to be able to start and stop the acquisition with pressing a physical button on cRIO.

  I want to say I don't want it to be "as a start-up," I don't want cRIO to start the acquisition as soon as the power supply is ensured.

  Is this possible?

  Hi Cashany,

  you will surely find this switch status. But there are easier ways (but more expensive) for a button. Fiddling with a pen or a small screwdriver to switch USER1 is not what I call "user friendly"...

  -You have at least 2 voltage inputs on your module available. Use a switch voltage on the power inputs. Use a 'real' button!

  -You have an available serial port. You can set some pins on GND or voltage and check their status inside the cRIO/RT target...

• use of an input signal to start and stop screws

  IO have a Vi that must be started and stopped by a signal from a sensor on an automated production line. the problem is that the Vi I created to capture and compare images from a webcam placed on a robotic arm that is used to fasten the screw in part needs to be started and stopped a man using the screw that is "run" buttons located at the top left of the façade of the screws. How can I use an input of probe signal (+ 5 V for 10 ms) to statrt and stop the Vi? The Vi cannot be allowed to run when there is no room for the robotic arm work, it would consume electricity that costs money.

  No program in any language can be started by an external signal.  Some software must be running in order to detect the signal.  If this software is an integrated program running on a microcontroller or a multiprocessor supercomputer it still works the same way.  The power required by the computer is probably low compared to the power consumed by robots and other manufacturing processes.

  As you have described your system, you will need a computer that runs all the time while waiting for something to happen on the Web site, which indicates that a paypal transaction has occurred.  What is different from having a computer running LV with a VI in an idle state?

  If your process needs to be thrifty, you expect better have enough orders that you turn the whole sytem market very often.  The cost of automation of all would be excluded by the income of sproradic.

  It is certainly feasible to have a master computer that controls the power of certain parts of the system that are not needed at all times.  PLCs are used to control the State strong relays or contactors put different subsystems.  Make sure that time is allowed for systems comes on and initialization before you begin production.

  I would focus first on getting the automation of a condition but inactive of working before trying to go to the complete power down and control.  I think you will find that the power process will require sitting in a State of inactivity for some parts of the system while the other parts are being initialized, you will need to do in a State of rest.

  Lynn

• Why my computer does not delay when I try to watch the video again? It's a constant start and stop and buffering?

  I get a lot of golf maaterials and lesson over the internet.  It became a real pain and a problem for me to keep up with instructions.  When I received instruction to internet and start to play the video it winds and winds and play them for a few seconds then start and stop throughout the presentation.  What can I do to fix this problem?

  If several computers are using the internet at the same time, it might slow down the video stream on a computer (laptop or desktop).

  Or your internet connection is simply not enough fast to stream the videos you want to watch. There are several different speeds for DSL, so the speed increase may help.

• How to start and stop a task with c#?

  Guys,

  I need a help. I'm trying to reproduce a task created using Meansument & Automation Explorer. The task is very simple create a channel of digital output and send the values 0 or 1 to enable and disable a relay in my board DAQmx.

  Kind regards

  Alexander has.

  I found the solution, add a new item in solution using Add new item choose component or and together the configurations such as a task type that you need. The issue will create a class for your task, this class has all the events to start and stop a task, and you can add your new methods if necessary.

  Thank you all.

  Alexandre Albuquerque