Batch processing issues

Similar Questions

• Out of sync a station with the model of batch process?

  Hello

  My project has 5 test stations are run in parallel. I decide to use the batch process model because I want that they start and stop together. Next to startup and shutdown, I have some part in the need for synchronization of the entire test sequence. But in 5 stations, I want a workstation without flash sync to these steps. I tried to use the commands synchronize with the precondition, but it looks like that other stations are waiting for that one I jump the sync. My other option uses rendervous with number of parallel thread total is - 1. I test it and it works. But I still want to know if I can use batch synchronize step or not because it offers synchronization of start and exit synchronization.

  Thank you!

  NTT says:

  Doug,

  Thanks for your reply.

  I want to have something happening parallel with other threads, but without effect by steps of synchronization batch. I have several workstations parallel to the Assembly line. They are sync due to the pick and place. But I want to have a process is functioning as the station manager who keep track of USE between the train station and other site conditions such as pressure, temperature.

  Thang

  As a general rule, the intent of the TestSockets in the process templates is that they will have a 1 to 1 with DUT match, taking your 5th corresponds to an object to measure? In other y 5 DUT tested at the same time? DUT often need things like logging database or report generation. Your 5th decision-making requires the generation of reports? If not maybe this 5th Jack is really more than one thread of utility and creating a new thread or performance during execution makes sense for her. If your 5th instead making it really fits under test DUT in parallel enitrely separately from others the DUT then maybe you should start up a new run for the socket using the sequential model and just run as your other shots are running with the model of batch processing.

  So, it really depends on what you use this 5th station/thread to find out which method would probably work better.

  Hope this helps,

  -Doug

• News station using the batch process model

  Hello

  I have a test sequence using a model of sequential processes and station information by using the following, I.

  RunState.Root.Locals.StationInfo.StationID

  RunState.Root.Locals.StationInfo.LoginName

  I create a new test sequence that uses the model of batch process - when I try to enter the information Station data using the syntax above I get the following error

  Name of variable or unknown property 'RunState.Root.Locals.StationInfo '.

  Can some advice please if I go to the wrong place when using a model of batch process?

  Thank you best regards &,.

  Shane.

  Batch and parallel models you can access this information using:

  RunState.Root.Parameters.ModelData.StationInfo

  -Doug

• Variable overall station by the object to be measured using a model of batch process

  Hello

  I have 4 DUT which is tested by using individual ports of com I use global variables Station 4 to store 4 Com ports - COM port assignments are in no particular order and vary depending on the test PC station.

  Example:

  S1 = Com12

  S2 = Com14

  S3 = Com10

  S4 = Com9

  Using a model of batch process I want to test DUT all at the same time: I'm trying to understand what is the best/better way to S1 to S2 for UUT2, UUT1 and so on!

  Any help appreciated.

  Thank you best regards &,.

  Shane.

  The easiest way is to use the property Runstate.TestSockets.MyIndex to index a table.  Each socket of the batch will get an index (from 0 to n - 1, where n is the number of sockets) when it is created.  You can create an array (of strings? I can't tell if you just have channels or need a container) and use the property for the index in the array.

• Model of batch processing is suspended when Windows is locked

  I'm running the model of batch processing with 5 Sockets.  When the Windows form is locked, the grip of the model after all the test sockets have finished the model batch step titled 'Sync with controller - AfterPostUUT. '.  This call is part of the ManagedModelSupport.dll.  I have TestStand 2012 SP1 running on Windows Server 2008 R2 SP1.

  I have attached a few screenshots.

  
  

• Batch processing dialog box USE information

  I need to customize the model of batch processing with CVI. Need to add 2 for example several channels of serial number of the batch on top, remove the status message, bottom of socket - don't show the Seraglio etc number box. It looks like the files that I need to change are batchuutdlg.c and modelpanels.uir.

  Found that the source code is under "Instruments\TestStand National 4.1\Components\Models\TestStandModels." What are the best practices to make the change to the regulations provided the code? Also what files will be needed, if all the updated code will be then be in the same directory?

  Please notify.

  It depends on what version of TestStand you have.  Back in the day (I think that pre 4.0) there to be users and the folder OR in each of the folders TestStand. You had to copy into the users folder and make changes there.

  Nowadays (certainly with 4.5, but not sure about 4.1 knowledge is true for 4.1.1), you would put any change to the public folder.  If you go to: C:\Program NIUninstaller Instruments\ you will see a link to something called the TestStand Public folder.  This file should be structured like the file.  The same and all directories.  When you change the native code copy you on public directories and this way you always have native original code if you need to go back.  In addition, it handles situations where you might not be an administrator on a computer - you cannot edit files in Program Files.

  If you look in the search directories in TestStand, you will see that it refers to the Public folder first, then the Aboriginal file.  In this way that it captures your code always updated first.  So if you were to spend the SequentialModel.seq in the public folder your way would look like this: C:\Documents and Settings\All Users\Documents\National Instruments\\Components\Models\TestStandModels\SequentialModel.seq (for XP).  But you would still have the (unchanged) SequentialModel.seq on in the Aboriginal file.  When a sequence file loads and will enter the process model, he looks first in the public record and captured this process template.

  In your case, it would be one of the files you mentioned.  Well I think that you would like to move all of the CVI code above, so it can stay with the prj.

  When you go to deploy on the first tab, there's a checkbox called: deploy files to the directory Public TestStand.  If all of your customizations will now be included in the deployment.  It will put their new in the public folder on the deployment computer and the search directories should be similar, so you would be good to go.

  Hope this helps,

• Access to information USE testsocket in the model of batch processing

  Hello

  I have a custom reminder pre-batch TS 4.0, which fills in the serial numbers, part numbers, etc for the DUT being tested (using a model of batch processing). These variables are found in the pre-batch settings. However, I can't understand how to access these values further reminders (SequenceFilePostStepFailure, for example).

  In the pre-batch sequence, I can access the serial number for UUT4 using Parameters.ModelData.TestSockets [4]. USE. Serial number. But I can't find the object of ModelData when you don't the pre-batch and tried to look in the root, runstate, hand, sequence, etc., without a bit of luck.

  Any thoughts?

  Thank you

  Chris

  You can find it at:

  RunState.Root.Parameters.ModelData

  There will be only at runtime, and only when you actually run using the model of batch processing.

  Hope this helps,

  -Doug

• Is FDMEE runing through the user interface or batch process?

  In an event of jython script, how can I determine if the FDMEE process is run through the user interface or as part of a batch?

  Use the method getBatchJobDetails (BigDecimal pLoadId) API, if it returns a result set, then there a batch process, if it is not it is not.

• Remix as a batch process

  Hello!

  Is this to my colleagues here present or developers know how to use the remix as a batch process feature. I need to shorten over 100 songs. I wanted to do this at the same time. Any advice?

  I don't think you can use Remix in a batch process, since it applies only to the Clips in the multitrack. It is non-destructive and can be undone and redone. No real audio files are saved until you doing a mix or export from multitrack view...

• Batch processing and learning actions?

  Hello world

  Some of you may know me from the Dreamweaver forum, where I am the unfortunate creator of this discussion.

  https://forums.Adobe.com/thread/2153994

  I'm virtually useful a newbie to Photoshop, as I the have not used since version 5, (i.e. 5 CS5 not) I use it since version 2 and I'm sorry to do this, I moved to Fireworks, and while I don't know how to use Fireworks batch processing, I have no idea how to achieve what I want to do in Photoshop.

  Nancy O, suggested I use Photoshops 'action' to achieve my goal, so to that end, I was wondering if anyone could suggest for me the quickest and easiest for 'Up to speed' with the use of batch Photoshops / action.

  All suggestions, be it video or written would be appreciated.

  Thanks for your time

  PZ

  The plugin Image Processor Pro script is more powerful.  It may even be in steps of actions. The setting that you use in the dialog box save the scripts > PLC > Image Processor pro... step will be recorded in the action by the plugin script step.  When you play the Image Processor Pro script action will work around poster its dialog box and use the setting saved in step, unless you put on the dialog box in the action stage.  I have a single action has a length of Image Processor Pro.  This same test of the Image Processor Pro script save 9 jpeg files for each file processed image ration cropped and sized for the different aspects and dimensions of the screen I.

  

• Convert Multiple TIFF files to PDF in Adobe Acrobat 9 Pro with batch processing

  Hello. I use Adobe Acrobat 9 Pro and I am trying to convert approximately 3000 TIFF files into PDF files. Is there a way to batch process all the files at once so that it can be done quickly?

  Hi Alisha Garrett,

  Please see the thread with a similar question:

  • Batch convert TIFF to PDF
  • TIFF files secret batch in batch combined in one PDF
  • TIFF files secret batch in batch combined in one PDF

  Check if that helps.

  Would also like to inform you that Adobe Acrobat 9 is an old version and does not support end of support | Reader 9 and Acrobat 9 (and previous versions)

  Kind regards

  Meenakshi

• Best app for the batch processing of photos for the web?

  I would like to know what is the best application for batch processing photos for the web quickly and easily. I'm a web editor and often need to resize, compress, or crop several photos and would like a quick way to configure the basic parameters and processes for example 20 pictures at once. Basically, I'm looking for something with the ability to FastStone Photo Resizer (I'm on a Mac and cannot use FastStone). I remember an once suggested graphic designer LightRoom - would that be a good idea or Adobe has something else? Or maybe not Adobe at all?

  PhotoShop seems heavy for this purpose: it is ideal to make the photo woth that much at the time, but less large to do less with many pictures at once. I know that I can implement some sort of macro-thingie, but I would like to be able to quickly change settings such as the percentage of compression or the width in pixels.

  I don't need a lot of editing tools, mostly just work in pixels, resizing, compression or cropping and save for the web in .jpg and .png - and Mac.

  I hope someone here can guide me in the right direction.

  Hi eval

  I think the best thing for you is Adobe photoshop elements, cover in simple not expensive and all what you want

  Photo Editor software & tools | Adobe Photoshop Elements 14

  concerning

• PS CS4 - how to perform batch processing which includes 'save' step and saves all the layers in PSD?

  I created an Action in PS CS4 to apply NIK Color Efex Pro4 to a JPG image, adjust the opacity of the layer CEP4 to 50% and then file > save as to a file in PSD format in order to keep the CEP4 and background layers in PSD format.  It worked well with the image that I was working in the creation of the Action - reopening of the PSD file, it showed the two layers as I wanted.

  But when I opened then four other JPG images, went to file > automate > Batch and applied this new Action to all open files, recording in the same folder as the original image, when I created the Action, all the PSD files created by the process of batch contain only one layer (Layer 0).  How can I me Batch process and always the CEP4 and the background of the layers in the PSD file?

  I swear it worked in the past, but I must be missing something.

  Thanks in advance for any help offered.

  See if implementing during a stage of duplicate layer in the dispute before the color efex pro stage of the work.

• Batch processing disabled the client Workbench 11.1.2.3

  Hi all

  I log in FDM customer Workbenck as an admin user and I don't get to test my batch process given that the option of batch processing to the tool-> batch processing is disabled.

  Anyone know what's missing?

  Thanks in advance

  Indeed,.

  I found what was missing. I had to go in Tools--> Application settings and batch Loader menu item is unchecked.

  Thanks for your help.

  Concerning

• Can I use Organizer to change the size of .jpg of all photos in a folder in a batch process?

  We use wa-a-ay too much disk space for a growing collection of photography.   My daughter is a monster of a camera with four children - have to - I say more?

  
  

  In my current test file, the size of the original photos range from 2.3 MB to 4.2 MB.  I took a picture at random and printed original and then three more, saved by PSE9 as .jpg files with quality average, maximum and minimum settings on regular letter-size paper and still on paper photo 4 x 6.  It takes a magnifying glass and a kneecap calibrated to detect a difference on paper, and it is even more difficult on photo paper.  I think that I should take the pressure off the hard drive capacity of all reduce to a more reasonable size; After all, minimum quality printing takes less than 1% of the space like the print quality.

  
  

  I have the feeling that I can accomplish this in a batch process with the Organizer, but that's all I've got is the intuition - not the know-how.   I would like someone to make me scroll through the process.

  
  

  Also, I expect a lecture on why I shouldn't do this.  Go ahead; I will listen.

  
  

  Thanks, Bud
  

  
  

  Bud,

  BudV wrote:

  Also, I expect a lecture on why I shouldn't do this.  Go ahead; I will listen.

  You are the only one to judge... You won't regret it if you want to use photos with the size and the original resolution at a later date?

  Yes, you can use the organizer or the command 'treat multiple files' Editor. But first, you should think about two questions:

  -Are you ready to save full resolution and size files before the "shrinkage"? External USB drives with large capacities are available and affordable.

  -What you say, the optimum size would be for files resized to size 4 "x 6" at 300 DPI in 8 to 10 jpeg quality.

  Resizing the Editor: use the command 'treat multiple files' and click on the button "Same as source". I do it without a backup of first sound... This can be done per-folder.

  Resizing of the Organizer: use the 'Export' command This command leaves the original and puts the files in a new folder. The resulting files are NOT included in the catalogue. This means that the maintenance of your organization (albums, categories, tags,...) will be difficult. even if you use a file management system.

  Another solution with third party software such as Faststone photo resizer:

  -Absolutely do a full backup before

  -Run the resizing of the external software options so that files are resized without being moved. Replacing the originals.

  -If you use the Organizer, your organization will be preserved, but the size of the files in the catalog databases and the thumbnail will be wrong. You can recreate the thumbnail cache by deleting the thumbs.5.cache file in your catalog folder. It will be rebuilt automatically.

  That worked for me in the past... no warranty for you!