Battery can´t be charged at 100%...

.. just 74% which results in four hours if the use is low. The S10e 14 months, the battery is already showing his old age? Furthermore, I use usually the netbook with power supply is connected, he has rarely run on battery power only.

[i]@Markus36... nothing to lose...] Battery remove PSU... Press the button for 30 seconds, plug in the battery until the computer turns off... [/ i] I got the last part; Let the computer run on battery until it stops automatically, but could translate you the rest in German or in simpler English?

Tags: Lenovo Notebooks

Similar Questions

  • When the portable computer connection, battery can not be charged

    I just bought my phone yesterday and when I plugged in... the battery can not be charged

    If you bought it just take it back to the shop or their ring. The law says that if you're selling something, it must be "fit for purpose" that is not obviously corresponds to the end so that it has been designed and they should sort.

    Free support tools

  • Satellite M70 - battery can not be charged more than

    Hello!

    I have a M70, who is 14 months old and I have a problem with it: the battery cannot be charged more! The computer and battery are in good shape, and 2 days ago the battery works great (it's an original 4000 Mah battery and he had a life between 2 and 3 hours). Now, the computer does not start unless it is plugged in and it shows the battery constantly charged 1%. The laptop does not suffer any physical damage.

    What's weird, is that when I plug in the power supply, the battery seems to be load - the load led is on between 5 to 10 seconds, and then it turns off!
    When it is plugged in, the laptop works very well.

    The questions are:

    (1) may be a software problem, or maybe a virus?
    (2) how will I know if the battery is damaged or the problem is with the laptop and it cannot charge batteries more.
    The warranty has expired and the company where I bought it refused to have a peek.

    Thank you
    Eugen

    > can it be a software problem, or maybe a virus?
    No, I Don t think so!

    > How can I tell if the battery is damaged or the problem is with the laptop and it cannot charge batteries more?

    It is not possible for the common user who doesn t have experience and special tools.
    I think you will need to contact the ASP in your country for a control.

    You will pay for it because the warranty has expired and I really put t see other possibilities.

  • My battery is set up charges to 80%. How to change to a 100% load?

    My battery is set up charges to 80%. How to change to a 100% load?

    I have a samsung Q320 laptop

    Thank you!

    Hi MEY85,

    Since you need support for batteries for laptop computers Samsung set up a load of 100%, you may need to get in touch with Samsung to get help.

    You can view the following link to contact Samsung:

    http://www.Samsung.com/us/info/contactus.html#

    Hope this information is useful.

    Jeremy K

    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • BlackBerry Z10 battery not charging to 100%, is stuck at 78%.

    Hello everyone, its my first post so if this is in the wrong section, or this problem has already been resolved, kindly link me to the correct message.

    I have my blackberry z10 not too long, probably 2 months, and as a first step, the battery was not serious. A full charge is 100%. There was 1 opportunity where I used it until the battery was completely hard and off the unit its own.

    He warned me 10% left and stops immediately after that. Now I'll have the problem of it not charging up to 100%. He shows me the icon of "lightning" up to about 75% where it stops and shows me the '=' sign as in fully charged or not charging.

    I tried to restart the device and even turned off while loading see that fixes the problem or not, but nothing helped.

    Someone here has the same experience? Any help or advice would be greatly appreciated

    Hello! I think that's it:

    http://supportforums.BlackBerry.com/T5/BlackBerry-Z10/Z10-battery-life-is-not-accurate/m-p/2447449#M...

  • Equium M50 - 192 battery is not completely charged

    Hello

    I bought a M50-192 yesterday, took home and tried out worked well. After awhile, I turned it off and let it charge up. My roommate looked at the laptop and decided to remove the battery (the laptop is not was plugged at the time) when he handed over the battery and turned on the laptop we learned the drums as in charge of 100% but it is false because the charging light did not have on the battery has been removed.

    Today, I decided to completely discharge the battery and load properly, but after 2 hours, it says its fully charged. In the book it says it should take 4 hours or more.

    Is there something wrong with the battery? If so, is there a way I can fix it?

    Thanks in advance
    Robert

    Hello, Robert

    In my opinion, you are the same user as 98% others. Please read s manuals. It is detailed describes how to charge the battery for the first time.

  • Microsoft Composite battery "trendy but no charging current.

    Original title: Microsoft Composite battery

    I use an Acer Aspire 5732z laptop. My Microsoft Composite battery driver disappeared and my battery is now charging. It says "connected but no charging current. How can I reinstall the driver?

    Thanks in advance :)
    Nominal capacity: 47520
    Full last Charge: 47520
    Thank you.

    Hello

    These figures show that the battery is always 100%.

    If you still see the sector, message on the battery meter does not charge, perform the following steps.

    The situation you describe can usually be fixed by doing a Cycle of power on the laptop.

    Perform the following steps.

    1. shut down the computer.

    2 unplug everything from the computer. This includes the AC adapter / CC, Modems and routers and external devices, such as printers, disks, USB devices, etc. Nothing should be left plugged into the computer.

    3. remove the battery.

    4 wait 30 seconds. Press and hold the power button on the laptop for 15 seconds. This evacuates any excess electric energy out of the laptop.

    5 reconnect everything on the computer, including the power adapter and the battery.

    Start the computer and check the results to see if the problem is resolved.

    Concerning

  • How will I know if my magic keyboard is in charge? And how know when it is done load so I can unplug the charger of lightning?

    How will I know if my magic keyboard is in charge? And how know when it is done load so I can unplug the charger of lightning?

    I remember reading that the charging time is about two hours.   If you have exhausted the battery it may well take longer.    After the period of two hours, he must run for about a month in any case if you could take the charger after 2 hours.    But I remember also as statements using the old MM1 mouse with rechargeable batteries Apple and stand-alone charger.    MIne has quickly reduced by about 14 days and now its down to 7 days.

  • battery plugged in (not charging)

    Problem started when the laptop was about 20 months, then current intermittently for about 3-4 months.  Battery plugged (not load) and while in this State (with connected AC), it runs quite fast.  New battery and battery... same problem.  In addition, during the time (no), if I remove the battery the laptop stops immediately, even if the AC is plugged.  I have read at least 200 questions like this and no one has an answer for that.  I don't think it matters what kind of laptop is much has made and models are experiencing the same thing. I have Toshiba Satellite A135-S4407.  Short grand for 2 years now.  Windows Vista Home Edition. Looking for a real answer.  Toshiba has not one not Microsoft.com. none that I could find.

    darloma,
    Related material means that the problem is not, or cannot, be caused by the software.  Material are the physical components that makeup a computer system - case, motherboard, hard drive, screen, battery, etc., and the software is the operating system and the programs that run ON this hardware.  Sometimes it is difficult to determine if a problem is caused by the lack of equipment to operate according to the manufacturer's specifications or if the software is originally a problem because it creates a situation that makes the defective material.  But in the case of power - and more specifically a battery - it works or not.  If a battery is not that it is either a defective battery or a faulty charger.  There is not any software involved.  Software can cause a computer that is not closed properly, or wake from sleep correctly, but the software cannot do a battery hold a charge or not to hold a charge.  So Anthony said.  This problem cannot be caused by the operating system, so you should contact your hardware manufacturer.

    Thank you

    Gloria
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • See the product can take in charge the alternative LDAP?

    Hi all

    See the product can take in charge the alternative LDAP?

    Thanks for any input.

    Dennis Dai

    Unfortunately no, currently MS Active Directory or Active Directory LDAP compatible 100% is necessary.

    That you want to use instead?

    Best regards

    Linjo

    If you find this information useful, please give points to "correct" or "useful".

  • Got told down load that I have 4 virus on my phpne and damage the battery. can u help please

    EU says down load that I have 4 virus on my phone and said his damaged my battery can u help me please

    lounath10 said

    EU says down load that I have 4 virus on my phone and said his damaged my battery can u help me please

    Hello lounath, sorry for the challenges you encounter.

    What exactly we asked you to download please?

    -Michael

  • Lenovo battery "Plugged in, no charging current"

    Issue of title: original battery

    I plug a laptop lenovo with windows 07 installed two months ago and already I have a problem with the battery. Icon constantly shows the battery is ' plugged not charging. I brought the laptop to the shop and there doesn't seem to be a problem with the battery and charger either. Does anyone know what this may be due?

    This is not necessarily a technical foul.

    Edit - this link seems to resolve the issue http://forums.Lenovo.com/T5/IdeaPad-Y-and-U-series-laptops/Z560-battery-80-available-plugged-in-not-charging-energy/Ta-p/309028

    Check the manual of your PC, the Lenovo support site, Lenovo files in the menu start all programs & BIOS for a battery utility.  Several PCs have utilities with names like "Battery life extension" which will load only the battery when its load is below a threshold such as 80%.

    If you search this forum for is not charging battery, you'll see several examples.  Look at the search results for those on Lenovo PCs to help a solution more quickly.

  • How can I make WMP 12 100% personal and custom?

    Hello world

    Is it possible that I can have my WMP 12 100% custom? As in a way that all the buttons are customized, the search bar and progress, the bottom, the tabs, the Panel colors, fonts, highlight color?

    I'd like to customize my WMP as I'm a fan of digital design of applications, interfaces, icons, fonts and colors.

    Thank you for your help,
    Stephen.

    I don't think that allows this kind of individual changes of Windows by default. But you can use Skins or 3rd Party software can do.

  • Can you please charge my Visa for Bill this month

    Can you please charge my Visa for Bill this month

    If you want to update the card details, please contact customer service

    You can use: http://helpx.adobe.com/x-productkb/global/phone-support-orders.html

  • Every time I make a video, quality shows 50. How can I increase it to 100?

    Every time I make a video, quality shows 50. How can I increase it to 100?

    You can create a "preset export settings. To do this:

    1. Choose an export format (e.g. Quicktime)
    2. Choose a preset (for example HD 1080i 25, H.264, AAC 48 kHz)
    3. Change the settings for video quality at 100
    4. Your preset will change to "Custom". You can give this new export preset to a new name (for example HD 1080i 25, H.264, AAC 48 kHz, 100 Qality)
    5. Next time, when you export a movie choose your new preset in the drop-down list.

Maybe you are looking for