Security wipe program

Similar Questions

• Under Security Essentials program and continues to stop at c:\winndows\system32\codeintegrity\driver.stl

  Original title: c:\winndows\system32\codeintegrity\driver.stl

  I've been running the Security Essentials program and continues to stop after the digitization of 80267 files to c:\winndows\system32\codeintegrity\driver.stl.

  Should I uninstall this driver?  Should I rename in a .dll file?
  Should I continue to allow the Security Essentials continue as is?
    
  I still have an IYogi dock listed on my main drive.  Most of the scanners don't analyze this player.  I have removed/uninstalled most of the IYogi.  They had files in different areas of my computer.
  Should I wipe my hard drive and reinstall all files originating from the Installation disc.  If so, Microsoft Security Essentials will install all security for Vista patches?
  My user accounts been hacked even in Safe Mode, it is erratic.  UAC gives me a variety of messages when I try to change passwords Administater.

  Hello

  It seems that the computer is infected with the virus.

  I suggest you to uninstall the drivers and check if the same problem persists.

  See also: http://windows.microsoft.com/en-US/windows-vista/how-do-I-remove-a-computer-virus

  Note: once a virus is removed, you will need to reinstall some software, or restore lost information.

• BB Dev Alpha - another problem after security wipe

  Initially, the unit has lost ability to connect on the computers (it's not recognized on any computer to which it was connected).

  So I decided to do a security wipe. After the wipe whenever the phone tried to load the operating system, the progress has reached 100% and stopped. I downloaded the autoloader driver DevAlpha A / B 10.1.0.1485 and tried to reinstall the operating system with its help, but he refused to install with error messages "OS is not material", "this file does not match the device. Then, I downloaded an older version of dev alpha drivers (DevAlpha 10.0.10.263 autoloader), but he got the same errors.

  After updating these attempts of the device reached the start progress 100%, then restarts, once and once more. Software link cannot start the firmware recovery process. It is also interesting that the device hardware ID is not listed here.

  I have read a number of topics dealing with similar issues of DevAlpha on the support forums, but some of the solutions are outdated and others do not work for my device. Can someone give advice? Thank you

  P.S. here is the log of 10.1.0.1485 driver:

  C:\Downloads\Programs>Autoload-DevAlphaA_B-10.1.0.1485
  RIM Wireless Device Command-Line Auto-Programmer Version 3.10.0.29 (Win32) [Apr
   1 2013 19:59:10]
  Copyright 2012 Research In Motion Limited
  
  Connecting to Bootrom:
  Resetting Device: Connected
  
  [       Uploading RAM Image 0x80238984 ] [############## 100 ##############]
  
  QCFMv1/v2 Hybrid File
      containing: Radio
  
      Signature Trailer:
         EC521_512 Signer: 0x48584E51 (QNXH-OS-1)
         EC521_256 Signer: 0x4C584E51 (QNXL-OS-1)
  [                  Writing  0x006E0000 ] [############## 100 ##############]
  
  QCFMv1/v2 Hybrid File
      containing: IFS, OS, User File System
  
      IFS/OS Version:        10.1.0.1485 DEV
          Hardware ID:       0x06001A06 RIM BlackBerry Device
          Metrics Version:   3.18
          Build Date:        Apr 13 2013
          Build Time:        10:23:20
          Build User:        ec_agent
          STP Protocol Ver:  0.0.4 (release OS)
  
      Signature Trailer:
         EC521_512 Signer: 0x48584E51 (QNXH-OS-1)
         EC521_256 Signer: 0x4C584E51 (QNXL-OS-1)
  --> OS does not match hardware. (C: 0X06001A06 H: 0X8500240A O: 0X051D0001 )
  
  Error: Failed to load images.
  
  Error: This file does not match this device!
  

  And here is the log from 10.0.10.263:

  C:\Downloads\Programs>Autoload-DevAlpha-10.0.10.263.exe
  RIM Wireless Device Command-Line Auto-Programmer Version 3.10.0.15 (Win32) [Dec
  20 2012 22:31:59]
  Copyright 2012 Research In Motion Limited
  
  Connecting to Bootrom:
  Resetting Device: Connected
  
  [       Uploading RAM Image 0x8022E584 ] [############## 100 ##############]
  
  QCFMv1/v2 Hybrid File
      containing: IFS, OS, User File System
  
      IFS/OS Version:        10.0.10.263 DEV
          Hardware ID:       0x06001A06 RIM BlackBerry Device
          Metrics Version:   3.18
          Build Date:        Jan 27 2013
          Build Time:        11:33:05
          Build User:        ec_agent
          STP Protocol Ver:  0.0.4 (release OS)
  
      Header Version:        2.0
         Num Chunk Headers:  6
         Headers Length:     65120
  
      Chunk Header:
         Type:          0x06
      Chunk Header:
         Type:          0x08
      Chunk Header:
         Type:          0x06
      Chunk Header:
         Type:          0x05
      Chunk Header:
         Type:          0x09
      Chunk Header:
         Type:          0x89
      Signature Trailer:
         EC521_512 Signer: 0x48584E51 (QNXH-OS-1)
         EC521_256 Signer: 0x4C584E51 (QNXL-OS-1)
  --> OS does not match hardware. (C: 0X06001A06 H: 0X8500240A O: 0X051D0001 )
  
  Error: Failed to load images.
  
  Error: This file does not match this device!
  

  This means that you run z10 full os on your alpha dev b. To correctly flash has another version to it, make sure you download Z10 STL100-1 automatic loader, no Dev Alpha B one.

• If I had a non - Genuine Windows XP installed on my PC I would install Windows Security Essentials program?

  I upgraded my ram and since then I have to the notifaction of non-genuine windows and can not use my PC, but a few weeks before this happened, I installed Windows Security Essentials, I read someware that if I had a none genuine product, then I wouldn't be able to uploaded this, is this true? If so, what is my next moves to make my PC work again as I don't have the product key.

  Concerning

  Ken

  * original title - Hello, am I right in saying that if I had a non - Genuine Windows XP installed on my PC I would have not been able or allowed to install Windows Security Essentials program? *

  Hi tozer,.

  As you have installed windows security essentials before upgrading the RAM, you were able to install the same.

  You can check the article: Genuine Windows: frequently asked questions: (Section: if my computer is running non-genuine Windows can he yet to receive critical security updates?): http://windows.microsoft.com/en-US/windows/help/genuine/faq

  Also, follow the steps in the below link which will help you validate your version of Windows: Validation is as easy as 1-2-3! : http://www.microsoft.com/genuine/validate/validatenow.aspx

• BlackBerry Help Z10: Security Wipe - > KB33480-> no factory setting

  Hey everybody,

  I recently changed my Blackberry on the Z10 account, and I proceeded to do a security wipe. After that, the connection to the computer icon was displayed on the phone. So, I looked on the internet for a solution and kept the same finding: KB33480.

  So, I went with the steps, starting with the Blackberry link approach. Having said I reset the phone, he would have check for updates and tell me that:
  "There is no available BlackBerry Device Software updates."

  Here, the light of my phone is green.

  After I closed that, the Green led turns off, the red light quickly, then the unit starts. Logo of blackBerry on the connection to the screen of the computer again.

  I can't get this or workaround to work. I'm missing on the process described in step 6 of the workaround:

  "The smartphone BlackBerry 10 will now be off itself after 120 seconds. Shortly after the 120 seconds, the BlackBerry smartphone LED should turn green. Continue to wait after the LED lights in green, and you will be asked to install BlackBerry Device Software. Follow the prompts to install the BlackBerry software and once the installation is complete the smartphone leader and is now recovered. »

  The update password verification of updates, then goes straight to the no updates found screen instead of installing the software on the phone. Can someone help me please?

  Hey everybody. I got my Z10 work after 11 grueling hours trying to fix it. The key to implementation is to make sure that you have installed INTERNET EXPLORER 9 . Other iterations are not guaranteed, and they never worked for me once. I found a computer in my home that I was able to install IE9 on cleanly, then ran workaround. He worked at the beautfully. I'm now enjoying my Z10 a lot.

  See you soon.

• Z10 stuck blackBerry security wipe

  I just wiped my device security using the BlackBerry link and now my camera is stuck to the next screen

  http://i.imgur.com/KzZcxU0.jpg

  When I go to BB-Link and try to 'Reload', it asks to press the power button until the device is off. The unit get off but it gets activated immediately and get stuck at the top of the screen.

  The BB-link said it is impossible to connect to the device and therefore cannot continue.

  Can anyone help?

  PS:

  This device is provided to me by my company and is not a personal device.

  It is not finished wiping. The security wipe can take a few hours and up to 10-12 hours depending on the CASE, to data encryption enabled and the amount of data you had on the device.

• Z30 blackBerry security wipe icon taped Z30

  I saved my data link BB to reset the factory settings on it. After you click reset link BB asked me to remove the phone from the computer. And wipe security with a blue icon turning light in a black circle stuck between an hour.

  I just want to know if is it normal or not? and how long will it take?

  Thank you

  I did not a security wipe in ages, so I don't know what the icon looks like these days. I would say that a security wipe can take hours to complete if there is much data on your phone.

  You might be best to leave all night to see if he is ready to leave in the morning (unless someone else can confirm that the frozen icon is not a good thing and other measures should be taken).

  I hope that helps you.

• BlackBerry Z30 sim not detected after security wipe

  Hello

  My unlocked Z30 BB does not detect the sim card after security wipe. I did hard and soft reset, but the problem still persists. Today I took it to the service center and the guy told me that the sim connector pin is defective. How could he say that without inspection? To my surprise, he also informed that I need to replace the motherboard. Can someone please give an overview on:

  ++ If these questions have been seen on Z30 (I've seen for Z10) where security wipe cause the SIM to go unnoticed?

  ++ If security wipe and connector are correlated?

  ++ The worst case if the sim card connector is broken, fill out the motherboard needs to be replaced? (I know its 80% of the cost)

  ++ Is there anyway I can defend higher up in the service center

  Troubleshooting:

  > same sim works in any other mobile phone

  > no sim card works in Z30

  > The used micro sim card is the standard sim and not cut manually.

  > Reset multiple hard / soft / volume up and down reset button did the test (equivalent to removing the battery).

  I am based in India, in Bangalore, and the unit is under warranty (only 4 months). Name of the service center is Redington India, Cunningham road, bangalore.

  Any pointer is appreciated. Thanks for your help!

  Kind regards

  Imran

  A wipe destroy a physical component such as a SIM Slot

  It's just a coincedence

  Location SIM can be bought online, but you need to know how to solder.

  I see some listed on ebay for $4 USD

• BlackBerry Q10 security wipe on a Q10 takes a VERY long time

  wipe security took 56 hours. and the status is 99%. How quickly or another way to wipe. I need help * deleted *.

  Edit: Email deleted. At any time if you provide personal information to any other Member of the community. Please see the Community guidelines and terms and Conditions of use. for more information

  Hello

  We seem to be a lot of variation in the duration of a security WIPE will take. But the reasons are not completely clear enough... and so only you can decide when it has been too long.

  Once you decide, that it has been too long, your choice is:

  1. Remove the battery, wait 5 minutes and reinsert the battery
     • In some cases, the unit will simply continue with the WIPE. In other cases, it may do something else. YMMV.
  2. Use and automatic charger to force an OS own reloading on the device (which will include a device WIPE as part of what he does).
     • The autoloader should be able to force his way beyond the WIPE running and allow a reload of the OS to occur.

  Let us know if you need further instructions.

  Good luck!

• BlackBerry Q10 Q10 security wipe 15 + hours

  After downloading the latest OS update two weeks ago (too much air) my phone went to work almost perfectly, to have battery and severe lag problems drain (as in 3 hours that the battery would drain complete with NO use - even though I disabled all the radios and wifi).  The only used/installed apps on the phone are those who came with him - I use the hub for E-mail (gmail), phone calls, visual voicemail, and texts.  I regularly use the device and I use the calculator and the browser from time to time.  I use the Facebook app to check notifications.  95% of the use of my phone is entirely for phone calls, e-mails and texts.  I have a MicroSD card in my photos and videos saved in real memory of my phone and was less than half full.

  In order to alleviate the problems of lag and battery drain, I read about do a security wipe and reinstall the previous operating system directly.  I backed up my phone and started with the wipe of security more than 15 hours and it is always showing the icon (which looks like an SD card or a memory chip icon perhaps?) with a circle of rotation under it to make believe it works.

  I am concerned about how long it takes and how hot my phone feels to the touch (that and the fact that I have a working phone for the last 15 hours with no end in sight.)  With how I used my phone, I'm surprised it took this long.  I read about the risks of doing a wipe of Mid-security battery traction, but this does not seem normal. Pourrait my phone stuck in security due to a glitch erase mode?   Any advice?

  Thank you in advance!

  Try to reload the operating system with an auto-loader.

  http://supportforums.BlackBerry.com/T5/BlackBerry-10-OS-device-software/upgrading-OS10-devices-using...

• Microsoft Security Essentials Program

  Hello...

  I have a question I need help...

  I just downloaded your Microsoft Security Essentials program and got this error code...

  (an error has occurred in the program during the installation...

  If the problem persists, contact your system administrator.

  Error code... 0 x 80040154...)

  Thanks for any help...

  I've used this program before and had to remove it because my computer has been hacked...

  I ended up deleting many other programs with it, to make sure I had no more problems until I installed a new version of your website...

  Once I had my computer cleaned, I downloaded the new MS program on the MS site and can not turn...

  I know there is a version where you can set things like the time and date that the program do daily or weekly checks, but my version said only that it is having a problem... Of course I need help...

  Thank you, Kay person

  Disable you the anti-virus and make sure that the anti virus protection auto is not enabled. Then try again.

• Classic classic security wipe Blackberry blackBerry taking ages to get stuck at 98%

  Hi guys,.

  buy a classic blackberry from a friend and before they turned him over to the wire, they decided to start a security wipe and I had the phone when he was 72% (flashes on the screen when you touch the screen for a few seconds). Anyway, it took forever and I went online to read some forums and there some people waited another 5 to 6 hours. It was at about 15:00 in the afternoon. so I let him do his thing, and from 21:00 he had barely reached 87%. left there from one day to the next, but forgot to plug in for free, so the morning just after it reached 95% battery is dead. When I plugged it in to charge, he did it again, and after about 26 hours he did 98% (goes really fast to 72% and then took forever to get to 98%). got stuck on 98% for 5 hours... I know I porbably should have let it continue and maybe he would have done, but I held the power button , the screen displays 'classic blackberry' and the security wipe started again from scratch! its now been about 2 hours and its 78% (once again - it became very slow when it reached 72%)

  the classic has not the possibility of a battery pull, (since that's what some people have done according to the other forums) - so that s out of the question.

  is there anything else I can do? any help would be appreciated. the battery of my current phone is messed up and just takes 2 or 3 hours. If you really need to start to use the classic...

  Thank you

  If you had not looked http://support.blackberry.com/kb/articleDetail?ArticleNumber=000034045 then do and try again, following the instructions step by step.

  There are people having problems with the link on their systems. The procedure described above should work. If it isn't, then the problem might be with link.

  I saw cases where devices that seem by also Freemasons are recovered with Autoloaders. I'm trusting the words of others. I have no reason to doubt that an autoloader will work for you.

• Z10 blackBerry, I'm on my 3rd day of the security wipe... now what that?

  Hello

  I'm on my 3rd day of my secuirty wipe. The impasse to 98%. I he let it continue? Ive heard even if I restart it ill just wipe all over again. Help, please.

  Thank you

  You can try to remove the battery.

  There is a risk to the interruption of the security wipe. I don't want to imply that nothing bad will happen. Seems the worst is happening is to have to reload the OS, but I don't know if this is really the worst thing that can happen or not.

• BlackBerry Z10 security wipe and downloaded applications

  I know that if I do a security wipe, you erase all downloaded apps, but that those I paid a small fee for (for example, euro 1-2), I have to pay again?

  If you connect (setup) your Z10 using the same BlackBerryID you access again without having to pay for the same applications.

• BlackBerry Z10 z10 usb keeps diconnecting after faulty security wipe

  Hello

  I just tried a security wipe and got the icon "connect the phone to the computer" when starting. In fact, the phone is blocked here. My phone usb cable everything worked fine earlier today, but now it just keeps disconnecting after 1 or 2 seconds. I have already installed the BB link and it does not recognize my phone but I can't reload, because it keeps disconnecting. Any suggestions on what I should do? Will be a great help, thank you.

  Here is the official solution for a deletion of security failed:

  http://www.BlackBerry.com/BTSC/KB33480

  If you do not link to recognize the device then I would try to load the operating system manually:

  Download the correct autoloader for your device from the first post in the thread below. You need to know your complete model number (e.g. STL100-1 (or - 2,-3, - 4) located in settings > on.) Be sure to download your model which contains the radio file.

  10.2.1.1925 OS: http://forums.crackberry.com/bb10-leaked-beta-os-f395/lengend-presents-10-2-1-1925-all-q-z-887047/

  Close the link and leave the connected device.

  You will need to unzip the file downloaded from above before you can run.  If you do not have a decompression application on your computer, you can download 7Zip here: http://www.7-zip.org/download.html

  Double-click the automatic charger that you downloaded.

  The process should take about 5 minutes or more. When it's done, you will need complete the startup process before you can connect to Link, and restore the data.

  When you are finished, you can restore your backup, although I do NOT recommend restore your backup of the settings that it is best to start with this new OS, but it is up to you. You may experience some bugs here and there to restore the passage of the backup settings. Media and Application data seem to be OK to restore.