Battery care

Similar Questions

• NB200-10Z - battery care

  I recently bought a netbook NB200-10Z. I'm not really sure the battery care.

  Should I keep the battery charge all the time, when I do not use the machine or only to connect the battery to the hand when it is unloaded.
  In short how I look after my battery to maximize its life expectancy.

  Hello
  I have three golden rule for my battery...
  -For the first and the second time, you should drain at all then a charge to full capacity.
  -L' another time, remember to recharge the battery when reach about 30%.
  -Remove the battery when the Netbook has been plugged for more the 8 h.

  Also try to download this tool http://www.batteryinfo.de.vu/

  It gives the level of your battery and other useful info.

• battery + car charger

  Does anyone know where to get battery back atrix (not the droid x batteries) what car charger (not to mention that the car dock) is also compatible for use with the atrix

  

• HP Pavilion Sleekbook 14 battery care tips-

  Hello

  Only now, it occurs to me that I need to be very careful on

  keep the battery of my HP Pavilion Sleekbook 14 in good condition in the long run.

  Exactly how should I take care of my Pavilion 14 battery?

  I use it mostly at home, I need to detach the battery altogether?

  What if I leave the power load at all times?

  Advice and assistance is greatly appreciated!   ^ ^

  Thank you...

  Hello:

  This document should be of assistance to you...

  http://support.HP.com/us-en/document/c01297640

• Battery care, pls help me clarify :)

  I just this rMBP 2015 and the first time mac user.

  In regards with the maintenance of the battery, I've been looking for clarification on the ff since my mbp, most of the time stay at home now.

  I read most of the people leave mbp plugged when at home to minimize the number of cycle and have it use about 50% at least once or twice a month.

  1.) my battery is at 100% so load now it works on power adapter right and theres no risk of overcharging of the bat?

  After using my mac or before you go to bed, I mostly read it is not much of a difference in stopping or doing it either "standby mode". But since it will remain unused for long hours, I'd rather stop.

  2.) after closure should I unplugged and just plug in again before you turn it on?

  I also read that MacBook do not charge from full load up to what he dove percentage as about 95% of batteries? Return to question No. 2, if I disconnect the device after stopping allowing him is charged at 100%. With this logic when I plug it again before using it will run directly on the right power adapter?

  3.) it would be better if I stop > disconnect > plug > turn on? and just it run on battery until 50% once every two weeks?

  1. the OSX controls the battery charge.  There is no risk of overcharging.

  2. it makes no difference.  I leave it plugged only because it's one less thing to do.

  3. when a MBP was fully charged (100%), the charger will stop charging the battery but provide power to operate the MBP.  At this point the battery behaves as if it is stored on a shelf and be discharged very slowly.  When less than 95% charge level, then the battery will start recharging as well as the power to run the MBP.

  Two rules:

  If you run the MBP with the charger connected all the time, at least once a month during the MBP with the battery about the 40% level before plugging it back.  Lithium-ion batteries need exercise for long life.

  Never completely drain the battery.  That will shorten the battery life.

  Ciao.

• Charging the battery at 80% battery care options

  I remember there used to be a system for windows XP and Vista wehre you could charge your battery at a certain percentage so you could extend the life of it. Apparently load to 100%, decreases the life. There was an option of 50% and 80% option to choose.

  Hello

  Check with support from the manufacturer of their books online and the drivers and their forums system
  (as applicable) for known issues. Some manufacturer issued BIOS and other updates to help the battery
  problems.

  Control Panel control - plan change Options - power plans - power - advanced settings
  Parameters for the drainage and the use of parameters (this is how much to use and not how much or how)
  long to load).

  In fact, what causes a lot of wear on a battery empties it too low on several occasions. With today
  systems overload are not a problem.

  Here are some tips to help and troubleshoot battery issues.

  Old battery? Unplug the power to the computer - remove the battery and clean the contacts with a pencil
  eraser (do not use this, if your battery is fine slots - just clean up the edges of the knife which fit in)
  them and be careful). Batteries are old, or it could be a problem with the computer.
  Check with the support of the machine system, and many of them have on line forums.

  New Lithium-Ion type battery usually last longer if you do not unload then less than 30%
  However on a laptop that not extend their life a lot. Best is to use the a/c adapter
  When this is possible.

  I use the free version of BatteryBar to monitor my battery. Click on the green button on the
  Yellow box on the right side of the page to download the latest stable version.

  BatteryBar - free version available
  http://osirisdevelopment.com/BatteryBar/index.html

  Another good program

  Vista battery saver - free
  http://www.codeplex.com/vistabattery

  Problems with the lives of its use and the battery of power - Mr Fixit
  http://support.Microsoft.com/GP/windows_battery_power_settings

  You can also check with the manufacturer of system and forums that many use their own
  proprietary software to monitor the battery and they could be known problems with your battery.

  ============================================================

  Try this - to make a Restore Point

  How to create a Vista System Restore Point
  http://www.Vistax64.com/tutorials/76332-system-restore-point-create.html

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  Then Control Panel - Manager of devices - Batteries - Double click on each item - drivers - tab
  Update the drivers (which can do nothing) - then do a right click and UNINSTALL each.
  RESTART which will update the driver stacks.

  Problems with the lives of its use and the battery of power - Mr Fixit
  http://support.Microsoft.com/GP/windows_battery_power_settings

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Error Microsoft Visual C++ Runtime Library after that the laptop closed due to battery care

  Original title: Windows 7

  Dear Sir.

  I'm using windows 7, I was working with internet using airtel dongle, because of the discharge of the battery, the laptop shutdown.

  After I try to start the airtel connection but it shows "Microsoft Visual C++ Runtime Library.

  I uninstalled the program and re installed but encountered same error.

  I use airtel dongle on the other system, on this dongle is good work.

  All professionals have a request to say the solution.

  chk if visual C++ is installed on the computer, if not install it and check.

  Later supported Visual C++ downloads

  http://support.Microsoft.com/kb/2019667/en-us

• T61p Power Manager - battery care

  Hello

  I configured that should start if the load is less than 20% and stop 100% of battery charge.

  It seems to me that this configuration makes no sense, my battery is always charged to 100%.

  Any help is appreciated, if more information is needed, I can post, no problem.

  T61p, Win XP Prof SP3, 90W, BIOS battery: 7LETB2WW (2.12), 20.02.2008.

  Thank you very much.

  NR

  It's actually the functioning of the laptop and power eating works very well. Whenever your computer is connected to the adapter, it will always be pulling power so your battery can never fulfill. At least not to my knowledge. These threshold are not constantly reload and discharge you the battery but to protect your battery of unnecessary charge cycles. Someone correct me if I'm wrong.

  I do not understand what are you trying to achieve this way - your electricity bill would not go down by doing this, the work performance would decrease because offers autonomy low power/voltage (one of those anyway), your battery should fade faster. The only point I see is to test the battery life expectancy.

• Impossible to find battery car or photoshop on the tools.

  Hello

  I have CS5 Production Premium, and while in Bridge, I try to call the auto battery function to group the RAW photos I took for merging HDR in PS. problem is, there is no auto battery service avialable, and there is no option under Tools photoshop avialbale. I checked that the automatic collection startup script is enabled in the preferences, but this makes no difference.

  What I missed, or what should I do to enable these functions to appear?

  Thank you

  Geoff

  I don't think photoshop under Tools option and no automatic stacking under battery options are related.

  Because it's pretty weird I would reset the Bridge preferences.  Close the bridge and then hold down the Ctrl Key and launch Bridge.  You should get a window to reset with 3 options.

• Care function battery in HP?

  Hello

  I run my HP g002ax for several intensive tasks of performance on AC. Are there any other sw HP with the likes of battery care offered by Sony vaio function?

  I don't want the battery 100% charged and still connected to the source as is afftect the battery life.

  It is a silent since the Sony support site if you are not aware of what battery maintenance fn of sony's.

  http://eSupport.Sony.com/Tutorial/572/BR/en/

  I the fact manually by going to devc mgr/batteries/second option () / disable. But I find a lil odd and assume that it does not work either. Please help me in this regard.

  Thank you.

  I just HP AC power control utility. It was already there in the computer. Although he doesn't have the ability to set the threshold, and has limited control options, it does the job for the moment.

  Thanks HP! Hope that the sw improves to include other features like adjustable threshold manually at a given time

  ;-)

• Function 'Care' battery for VAIO SVS131190X in Windows 8

  I want to upgrade to Windows 8 for my SONY SVS131190X

  Does anyone know that it can use the Battery Care function again?

  If impossible, Sony gona go out with this function?

  Thank you

  
  

• HP ENVY notebook - 15 t-q400 CT: fully charged battery must be disconnected or not?

  Hello

  I have a battery of reagarding question. I want to know when my complete device charged then its load stopped? and his converts to the direct power? or again, it loads is not good for my battery?

  What should I do when my HP Evny fully charged device? Should I do it unplugged or not?

  Thank you.

  Hello:

  Here is a link to the HP battery care Guide... It will give you advice on how to get the life the most out of your laptop battery.

  http://support.HP.com/us-en/document/c00596784

• Smart battery from Apple case

  Hello to the community.

  I recently bought an original case of smart battery and I'm confused about the operation.

  It seems first using the case and when it is empty it begins to use the Iphone's battery.

  It is the feature as it was designed. But it would not damage the battery business over time because it remains for 2-3 days at 0%?

  All the Iphone battery care tips say to not let a battery the lithium discharged for a long time.

  So in mode I can survive with the phone battery only 3 days. Meanwhile, if I reload, the matter remains completely empty.

  He shorten the live time of the smart battery case?

  I want more discharge mode where the two batteries used simultaneously or at least the option to choose between modes

  Most all the external battery packs have electronics that stop her before she reaches completely from scratch. I don't worry about this.

• Want X 360 m6: battery low life - is it OK to keep laptop plugged in

  I recently bought an Envy X 360 laptop and the battery life is not great. I used recommended batteries, saving settings! My question is this: is bad to keep my laptop plugged in for most of the time (where the House)?

  The reason why I ask this question is that an old laptop and my overheated from the power supply and motherboard were a single unit, the computer crashed and burned!

  Thank you

  WildFan

  Hello:

  Laptops today have smart cards and smart batteries which means that the adapter is supposed to stop charging the battery when the battery is fully charged.

  You can keep the charger connected to the laptop, most of the time, but I suggest that you unplug the charger from the battery twice a month and run the laptop battery until you get the notification to connect to an external power source.

  Here are some useful battery care tips...

  http://h20564.www2.HP.com/hpsc/doc/public/display?docid=c00596784

• HP Pavilion Notebook - 15-ab15: is - it bad for the battery to always have the charger plugged?

  Sorry if 'hardware and upgrade' are bad advice for this question but I've not found a better...

  Is it bad for the battery to always have the charger plugged? 99% of the time that I have the laptop on a table and it's easier for me to leave the charger connected, instead of worrying about the battery percentage all the time.

  Hello:

  Yes.

  Please read this guide from HP battery care practices to obtain the maximum efficiency of the battery of your laptop.

  http://support.HP.com/us-en/document/c00596784