Battery handling with the HP HDX16t Premium Series notebook PC

Similar Questions

• HP Deskjet 3325 color inkjet printer not to proceed with the installation of premium window 7

  Mr President.

  HP Deskjet 3325 color inkjet printer not to proceed with the installation of premium window 7 installed hp laptop hp pavilion dv4. Please send me the solution to my email address * address email is removed from the privacy *.
  With respect,
  Tonia CENIA

  http://h10025.www1.HP.com/ewfrf/WC/document?docname=c01796821&CC=UK&DLC=en&LC=en&os=4062&Product=82029&sw_lang=

• Re: What battery delivered with the Satellite P300 series

  Does anyone know what battery the P300 comes with standard because it has only a 2.6 hours of battery life?
  The battery provided in the list of accessories is a 9 cells 6000mAH one and I need to know if it's a higher capacity or the same.

  What P300-xxx you have exactly?

  > he's only a 2.6 hours of battery life
  I apologize for this comment, but 2.6hours are in short for you?
  My little u400 runs only 2 hours on battery only using IE just for surfing the internet.

  However, battery working time depends on the use of the laptop.
  You can extend the battery working time decreases the brightness of the display and the deactivation of some other devices such as HARD drive or cooling modules.

  These settings can be made in Vista power settings.
  See this article from Toshiba
  http://APS2.toshiba-tro.de/KB0/HTD84026Q0000R01.htm

  See you soon

• my laptop hp dv5 with windows vista home premium series starts do not

  my laptop hp dv5 series with windows vista home premium not starting not, despite several presses of the power button that only a white screen appeared only to nd 2-3 seconds then the system crashes.all started last night, when the electrical connection cut (no battery attached to the laptop). in the morning when I tried to start it, the led light of the charger pin on the beds for laptop for about 6-7 seconds nd then turns off. When I pressed the power button with the connected charger pin, it does not start, BUT when I joined the battery wid, the light (power) led to turn it on mobile to the top but the led on the pin of the charger turns off after a few seconds. SA is NOT SHOWING anything on the SCREEN EVEN AFTER PRESIN F11 etc please help

  Hello

  Power outages often lead to problems of material with computers / laptops.

  If there's nothing on the start screen (HP Logo, etc.) at startup, you may have a hardware problem.

  If under warranty contact HP.

  If this isn't the case, under services, contact a repair shop, local.

  See you soon.

• Can I pair headset Bluetooth and a chest strap heart rate monitor Bluetooth at the same time with the Apple Watch 2 series

  Does anyone know if you can pair Bluetooth headset at the same time and heart rate monitor strap chest Bluetooth with the Apple Watch series 2? I can't find any info about it online. I hope so, because they have everything works without your phone now since it has GPS. Obviously a chest strap heart rate monitor gives you a more accurate reading. And who is running without music? If they want to really all the new capabilities of fitness improved series 2, that this is a must!

  The original WATCH allows you to do this, so I don't see why the series 2 would not.

• Satellite L300 - problem with the battery and with the FN keys

  Hello

  Please help me with the following 2 problems:

  1. I bought 10 L300, 2009 with Vista, and then I switch to Win7. After that the FN do not work. I can use a couple of access keys, but anyway, they do not appear on top of the scr4een as if it was on Vista. You have the solution to work again?

  2. after the upgrade to Win7, my battery is almost dead. I use 230V taken to work on my laptop. I used my laptop properly and it is really surprised that the battery had a life so short. You have a similar experience or you may have a solution to work again?

  Thanks in advance for your help.

  (1) install VAP (value added package) and Flash memory card Support utility.
  For example, you can find the driver area L500 software.

  (2) you can try to define some battery saving options in the power management Windows 7 in order to reduce the working time of battery.
  I switched to Windows 7 and the battery still works fine.

• Connections Satellite U200-192 Wifi guard fall power battery only with the mode on and off.

  Hi all
  The new satellite works well with internet, etc, when it is connected with the lan cable.
  Wifi mode guard fall on and outside with the linksys DI-614 router + when you work with the battery, but not when it is connected with the power cable!
  Thanks 4 suggestions
  Gilgenuldo

  Post edited by: gilgenuldo

  Hello

  For me it s clear case interruptions of connections WLan because the WLan card is trying to save portable power.
  This is nothing unusual. Of course, you can simply disable this option:
  Go to Device Manager, select the wireless network card and chose properties.
  In the Advanced tab, you should find several settings and disable the power saving option.

  Concerning

• GPS number race Nike Run Club with the Apple Watch 2 series

  I have my Apple Watch 2 configuration with the Nike Run Club app.  Repeatedly, I tried to run without my iPhone (6 current execution 10.0.2) and for some reason that GPS doesn't seem to work. While I open a session is running, pace/time is completely off and it isn't GPS data capture because cards do not appear in the app once I connect and send the run. Also, I assume that the GPS does not work because the pace is so far off the coast. It seems to me that it is logging tracks using the accelerometer, which has not yet been resolved as I want to be able to connect the tracks using GPS.  I need help. Has anyone else had the same help as he attempted to use this app? I bought the watch to replace an old Strip, Nike +, in the hope that I could run without the phone, but it has been an uphill battle implemented.  The Nike Run Club app not yet been updated in order to make full use of GPS data from the Apple Watch?

  Hello

  You may find it useful to consult the support resources of Nike and/or contact Nike for assistance with the help of their application:

  • Contact Nike (support is available by phone and via social media):
    • https://support-en-us.nikeplus.com/app/contact/l/4/t/4462/
  • Nike + running Club to support:
    • http://nikeplus.com/support/

  More information:

  https://iTunes.Apple.com/us/app/Nike+-run-Club/id387771637?Mt=8

• Battery problems with the new Satellite click Mini

  Hi guys,.

  my camera is completely discharged which was quite annoying. So I rebooted the tablet to 100% and the keyboard battery was at the time, reading 100% load. Applied bios update 1.70, after startup, the keyboard battery showing 0%. Now it will not charge, the Tablet is 100% and Windows reports battery 2 loads but it remains at 0%.

  There is a sharp screeching electric from the keyboard dock? Would it be a bad battery? Or is it so deeply discharged it will not charge?

  Thanks in advance

  If the battery is deeply discharged, you must hold the power adapter plugged in for at least 24 hours...

  But the sharp wail of electric from the keyboard docking station seems really strange...
  I can imagine that there is some lose connection or a hardware problem...

  In any case, Tablet must be connected to the power adapter and docked to the docking keyboard while loading... Please also make sure that the Tablet is TURNED off (press and hold the button to turn off the Tablet 10-15 sec)

• Problem with the HP Pavilion e033tx-15 Notebook shutdown/restart/sleep

  I had windows 8 OS 64-bit working fine with my HP Pavilion Notebook 15-e033tx.

  I had problems, so I decided to update my drivers. I already had BIOS VersionF.08 and the hp support page has shown that there is an update of the bios to VersionF.21.

  After updating the bios the problem started when I stop lighting and the laptop into sleep mode kindof. I have to hold the switch down to foce him close. If I restart it, it says "reboot pc", goes blank and then all power off, and it's not stopped.  and if I SLEEP, he's not waking up.

  I rolled back the bios and it fixed the issue.

  Then I freshly installed win pro 8.1, and it has only VersionF.21 of the bios available.  Same problem again.

  HP Support Assistant showed that a new bios update Insyde F.22. But the problem is still there.

  I searched other posts with similar problem and I can't seem to solve this problem. Help, please.

  Henrico Hello and welcome on the HP Forum!

  I understand that you have a problem with the BIOS.  I'll try my best to help you solve this problem. I suggest following the procedure described in this document for the restoration of the BIOS .

  If this does not resolve this problem then restores the version F.08 http://support.hp.com/us-en/document/c02693833 driver it should always work for Windows 8.1.  Here is a document for more information of the device to Windows 8 Manager which explains how to roll back the driver. It will be the same steps for Windows 8.1.

  I suggest Using HP Support Assistant (Windows 8) to change your settings for manual update. This allows you to choose what you want updates.

  I hope that this information help, please let me know how it goes.

  Thank you and have a great day!

• Problem with the Transmission in MCB2300 series (3-20 mistakes every 100 values of transmission)

  Hello

  I try to trasnmit a sawtooth of a MCB2300 by series (UART). Each saw tooth has 100 values and after transmission 3-20 values on the MCB2300 are always wrong.

  I work with 9600 bps, and the sampling rate of the saw tooth is 25 Hz.

  The example attached files are for LabVIEW 8.6

  Bye & thanks

  Amin

  Now, I did a working Version.

  If the problem is resolved.

  Good bye

  Amin

• HP probook 4530 s will not work with the battery installed with the battery installed.

  When the battery is in my hp probook 4530 s he will not come, but when I take the battery from the computer works fine.  I need to know what can cause that I got a hp replacement battery it works for about 30-45 minutes and then it does the same thing again.  Can someone tell me what is happening with my computer is 2 bad batteries or what?

  Hey ctbookkeeping,

  I would say that your laptop is going to need a maintenance. It is a symptom of the failure of the AC/DC converter Board. You can contact technical support at the 800-474-6836. If you do not live in the United States / Canada region please click the link below to get help from your region number.

  http://www.HP.com/cgi-bin/hpsupport/index.pl

  Take care

  Sean

• Do I need an iPhone with the Apple Watch 2 series?

  I'm not interested in getting a series Apple Watch 2 if it requires an iPhone. T it?

  Yes. It requires an iPhone.

• Problem with auto feed mechanism doesn't work only not with the Lexmark X 2500 series Printer running Vista

  In my view, the auto feed mechanism does not work.  No matter how I load the paper it says either it is not loaded correctly (which is) or it is a paper jam (which is not the case).  Recommendations as to what it will take to get my auto paper feed printer so I can print?  She will not even feed myself manually one sheet at a time, not to mention two or more sheets.  Thank you.

  http://support.Lexmark.com/index?page=localeSelect&jumppage=home

  The best thing to do would be to contact Lexmark on the Lexmark Support link above.

  http://support.Microsoft.com/GP/printing_problems

  And also read the above Microsoft information about printer problems.

  See you soon.

  Mick Murphy - Microsoft partner

• Problem with the HP Photosmart Premium (c410a)!

  We just got this new printer for the office that I work in and it installed fine, but when I put a sheet of paper in it for the scanner, usually the "HP Solution Center" appears and I can customize the menu scan... but when I tried scanning something, the Solution Center has come, but it is completely empty. We tried to uninstall and reinstall the software and turning the printer and the computer on and outside, does not. The computer is Windows XP Professional.

  Anyone know of any solution to this problem?

  Thank you in advance,

  Miranda

  Never mind! I ended up installing Adobe Flash Player, and now it works fine!