Battery of load/don't dump on Compaq CQ60

Similar Questions

• Event 45, volmgr. Windows 7 x 64 SP1. "The system could not sucessfully load the crash dump driver."

  The crash dump driver fails to load at startup.  When the system crash it does not blue screen and reboots the system.  I want to get it going so I can read the crashdump...

  There is a fix out there for pre Windows Vista SP1 that appears very relavent but will not be installed (by his design of the correction).

  Details below...

  Log name: System
  Source: volmgr
  Date: 18/05/2011 08:54:37
  Event ID: 45
  Task category: no
  Level: error
  Keywords: Classic
  User: n/a
  Computer: Cryogen
  Description:
  The system could not sucessfully load the crash dump driver.
  The event XML:
  http://schemas.Microsoft.com/win/2004/08/events/event">
   
     
      45
      2
      0
      0 x 80000000000000
     
      39071
      System
      Cryogen
     
   
   
      \Device\HarddiskVolume3
      0000000001000000000000002D0004C003200000BB0000C000000000000000000000000000000000
   
  

  Name of the operating system Microsoft Windows 7 Ultimate
  Version 6.1.7601 Service Pack 1 Build 7601
  Another Description of the OS is not available
  Manufacturer of operating system Microsoft Corporation
  Name of the CRYOGEN system
  System manufacturer system manufacturer
  System product name model system
  System Type x 64-based PC
  Processor Intel (r) Core i7 970 at 3.20 GHz, 3201 Mhz, 6 Lossnay, 12 or logical processors
  BIOS Version/Date American Megatrends Inc. 1301, 16/11/2010
  SMBIOS 2.5 version
  Windows directory C:\Windows
  System directory C:\Windows\system32
  Boot Device \Device\HarddiskVolume2
  The local United States
  Hardware Abstraction Layer Version = "6.1.7601.17514".
  Cryogen\Charles user name
  Eastern Daylight Time zone
  Physical memory (RAM) installed 24.0 GB
  24.0 GB total physical memory
  18.1 GB available physical memory
  48.0 GB total virtual memory
  41.8 GB available virtual memory
  Page file space 24.0 GB
  File E:\pagefile.sys

  Drop the question above actually lead to what may be a solution... The fix for Windows Vista pre SP1 fixes an issue with the (cloned) dynamic disks used to store the paging file.  I have two drives on the clone (E:\) which the system information noticed the location of the swap file.  I put the pagefile drive to C:\ in the event where it was the same problem, such as reported in the hotfix, but it has not fixed the problem...  So I assumed that this fix has been exceeded and a coincidence. But the information system showed the swapfile E:\, my dynamic disks...

  What has removed the error is "double adjustment" the return to C:\ drive.  Apparently once is not enough.  I put the pagefile on C:\ managed and rebooted system.  Then I noticed the mistake of volmgr came from miroir3 (second player in E:\) still info system showed the swapfile on C:\.   Weird indeed.  I went and be given the C:\ drive as the system swap drive to managed by activation/deactivation/Executive every car out of the current value, and then back to the desired direction.  After having done that and restart once more the error no longer appears in the event viewer at startup.

  The only thing worse than a BSOD, no BSOD.

• Im trying to stall the game counter strike1.6 and the Don t of steam I have load Don t know why and on my friends PC it works only on my dosen´t can you help me guys

  Im trying to stall the game counter strike1.6 and the Don t of steam I have load Don t know why and on my friends PC it works only on my dosen´t can you help me guys

  Hi rogerusa,

  1. you are running Windows 7 on the computer?

  The description of your problem, we understand that you try to install the game and it does not load.

  Check if you can install the game in clean boot or by turning off all non-Microsoft programs. To do this, follow these steps.
  a. open the article: http://support.microsoft.com/kb/929135
  b. Article, follow "step 1: perform a clean boot" the implementation of these measures will disable all programs not Microsoft currently running on the computer.
  c. right-click on the file to install game and click Run as administrator. Install the game and check the result.
  d. Article, follow "step 7: reset the computer to start as usual.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Vista won't go dormant and error related volmgr (could not load the crash dump driver)

  Hi all

  
  

  I've been using Vista for a couple of years and for some reason any yesterday he began to refuse to go to sleep.  I did not any changes to the system or ran updates until this happened (I'm not on Sp2, just under the security updates every now and then).  I checked the Device Manager to see if the network card has been to reactivate, but this was not the case; I also disabled the mouse of this awakening, and that did not help either.  I told him to go to sleep, and he wakes just in 1 to 5 seconds.  I checked event viewer and noticed that whenever I put him to sleep, I get volmgr error: "the system could not sucessfully load the crash dump driver.  Going back through the events, this error has not appeared before, so I guess that it is connected to the computer doesn't go to sleep.  Any help would be appreciated, thanks!

  Here are the details of the error:

  
  

  -

  -

   

    45

    2

    0

    0 x 80000000000000

   

    152547

    System

    Sebastian-PC

   

   

  -

    \Device\HarddiskVolume3

    0000000001000000000000002D0004C004200000430000C000000000000000000000000000000000

   

   

  Hi Sebas-82,

  I suggest that you update the driver for graphics card on the computer and check if it works.

  How to upgrade the graphics card on the machine driver
  
  1. click on Start, click Control Panel, and then double-click System.
  2. click the tab hardware , and then click Device Manager.
  NOTE: If you are prompted for an administrator password or for confirmation, type the password, or click continue.
  3. click on the graphics cards to develop.
  4. under display adapters, double-click the entry for your graphics cards, and then click the driver tab.
  5. click on Update driver software.
  6. follow the Wizard update driver to update the driver graphics cards.

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  If updating the driver fails, then uninstall and reinstall the latest driver for the video card by downloading from the website of the manufacturer of the system.

  Also see the Microsoft kb article below.
  Windows Server 2008 or Windows Vista Service Pack 1 - systems do not generate a dump file if the system partition is a mirrored volume
  http://support.Microsoft.com/kb/958933

  If the previous step fails, then you need to update the motherboard chipset drivers by contacting the manufacturer of the computer.

  I hope this helps!

  Halima S - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Compaq CQ60 tired?

  Hi all, I have a compaq CQ60 who starts, the fan turns on, the power light Trackpad light and turns on a wi - fi connection and all, nothing on the screen and no the all HARD disk activity.

  I tried the usual, hard reset, without HARD drive, No Ram, CDR and still nothing

  I tried the Ram and the HARD drive in my other PC, and both work well

  Tried the Ram and the HARD of PC drive and others in the CQ60 and still the same, nothing on the screen and no disc HARD activity or flashing caps lock Num or Num Lock lights

  I'm almost 100% sure that it is the motherboard? Is that what look like a fair assessment

  Thanks for any advice on this matter, regards. Mark

  Hi, Mark:

  It may be worth it if you don't mind tearing up this whole thing.

  Here is the Service Manual:

  http://h10032.www1.HP.com/CTG/manual/c02985882.PDF

  I don't know how many used one costs. Check the good ol' ' eBay, I guess.

  Kind regards

  Paul

• I want to download recovery cd windows Vista for Compaq CQ60-110EE

  I want to download recovery cd windows Vista for Compaq CQ60-110EE

  and I want to upgrade processor but idon't know this laptop supports processor? /

  [Personal information]

  Downloads are not available, recovery discs need to be ordered at HP, then they post them to you.

  Thanks for posting your complete product number, and I'll see which processors are supported on this model.

  http://h10025.www1.HP.com/ewfrf/wc/findModel?cc=us&DLC=en&LC=en

  #2

  Please do not post your s/n

  

• Compaq CQ60 311 - paved touch double click randomly

  You just bought Compaq CQ60.

  When the pounter of the mouse is positioned on tabs etc., sometimes it will act as if I double-clicked with my touch pad and go to another page / file etc...

  All solutions?

  Worked a treat - thanks for your help!

• No sound no issue on 64 bit versions of Windows 8 - Compaq CQ60 - 140EV

  Hello guys!

  I have the following problem after installation of 64-bit Windows 8:

  Independent of the version - home page, pro or business, on my Compaq CQ60 - 140EV speakers produce no sound, not even on the external speaker no sound. In Device Manager, everything seems to be ok. With all versions 32 bit Windows-8 or with previews of 64-bit version of W8-developer preview, overview of consumer sound etc work correctly. But with any details of Windows 8: home, pro or business there is no noise.

  I tried the following:

  Reinstall windows via USB, DVD - same issue, the installation drive in mode-same WIN7 compatibility question, installation driver followed problem update-even Microsoft, installation driver on the system to dual-boot (WIN8 and WIN7) - the computer find drive WIN7 and installed, but once again no sound. All other functions work fine except the sound. And the odd point is that the sound does not work only on the 64-bit version and only in the final version.

  Can you help me please to solve this problem?

  Thank you very much!

  Hello Toma,.

  I suggest you contact HP and get the latest drivers for chipset, as well as updates on the motherboard. You can also make sure to get the necessary drivers updated. You can check the link to contact:

  http://h10025.www1.HP.com/ewfrf/wc/contacthp?cc=us&DLC=en&LC=en&product=3836067

  Let us know if you have more questions about Windows.

• is the AC adapter for example 463958-001 for compaq cq60 equipped with an output connector dual voltage?

  is the AC adapter for example 463958-001 for compaq cq60 equipped with an output connector dual voltage? So I can't use the universal ac connectors?

  Your laptop will accept universal power adaptors, you just want just to make sure it's a 65-W AC adapter.

  The specifications of your laptop can be found here: http://goo.gl/b0r0r

• Laptop HP ST09 long duration of life: battery secondary load problem

  I recently bought a HP laptop computer ST09 long battery life, but it does not load how as I expect and cause me pain.   My computer is a Zbook of 15.

  Both batteries are detected by my Windows 7 number of functioning, however when an AC adapter is connected only the original battery charges.  This way in order to charge the secondary battery, I need to physically disconnect the original battery and have only the ST09 in.

  It is a very annoying procedure have to do whenever the secondary battery is discharged.  Is anyway at the same time load at the same time or just charge the secondary battery when the two are connected?

  OK done something that essentially solved the problem. There is a 'Quick Battery Charge' feature that can be enabled in the BIOS which stop the primary battery to 90% charge and launched a secondary battery loading to optimize the charge cycle.

  Neat

• Bulk loading cached using dumps

  Hello
  I can load the values from table in my application at startup using dumps adapter. do we not have any method in the cache
  store.
  
  Thank you
  -Trapani

  Hi thiru,.

  If you know all the keys of the table must be loaded into the cache, then you simply issue a cache.getAll () keys into manageable pieces.

  If you do not know the key, then you will need to write an application of custom loader which acts as a cache client and updates the data in the cache.

  You must also notify the cache store in advance that it is a preload, there is NO need to rewrite the data in the DB. This can be done either by an attribute that is designated for this indicator in the value of the cache itself, or the cache store cannot read a specific key replicated a cache to see if the phase preload is ongoing or not.

  Also, please see the following page:

  http://wiki.tangosol.com/display/COH34UG/pre-loading+the+cache

  Best regards

  Robert

• Portege M900: Battery and load problems

  I hope someone here could have helped me out in my problem. I bought my last Toshiba Portege M900 2010. I always want to plugin the charger my laptop when I am at work.

  It presents a time that when I turned on my laptop, the battery was about to be empty as the remaining 7%. I took my charger and plugged. After 5 seconds it turns off without any warning or so.

  I checked the lights in the laptop, the "light of load" is not on although charger is plugged into the outlet. I tried to use my Toshiba Satellite laptop charger and it worked.

  I tried to disconnect the battery from the laptop Toshiba Portege M900 its place and plug the charger again but there still does not turn on.

  So I took my Toshiba Portege M900 to nearest service center. But surprise when I arrived and on the problem of the technician, the laptop turned on after it was plugged. The technician said, he saw no problem because the laptop was in charge and it works right.

  But when I took it home, whenever I have remove the magazine from the taking of the laptop, it turns off immediately without any warning eventhough that battery is charged to 100%.

  And there were times, even if I remove the battery from the laptop but always plug the charger... the laptop will always be NOT PUT on.

  I tried to check the Toshiba PC Health Monitor, but it seemed that the battery works well. What do you think seems to be the problem? Is it the charger, the battery, or the power supply or the motherboard?

  > Is the charger, the battery, or the power supply or the motherboard

  I put t think its battery problem.
  Why? Because the laptop does not power upward even if the battery is removed but connected to the power adapter.

  Jack _Power? _
  Perhaps. It might be possible to equip jack or connection between the power supply and the card mother isn t ok.

  _Motherboard? _
  It could be a problem with electronic control gear that is part of the motherboard but once more; It's just an idea

  _Charger/AC adapter? _
  Hmm, you said that the adapter has been tested with another laptop and it worked. So maybe it s question no AC adapter.
  But are you sure that other phones have not run to the battery power?
  The adapter has been tested correctly? It is an open question.

  Another idea:
  What version of BIOS you have installed the M900?
  Find an update of the BIOS for the M900 protégé
  + Updated BIOS version 2.40 for Portege M900 and Satellite Pro U500 (for PSU56 *, PSU5C *, PSU5J *, PSU5Q *, PSU86 *, PSU8G * and PSU53 * ONLY) +.
  http://PC.Toshiba-Asia.com/support/drivers/details/30516

  You will find a detail on the correction of a problem:
  + System can not turn on without using the AC adapter / CC after the battery has been detached and attached again. This problem has been fixed. +

  Please check if your Portege M900 is one of the mentioned models and check if a BIOS update is available for your device.

• BATTERY ADAPTER LOAD DO NOT, ALL OF A SUDDEN

  MY BATTERY ADAPTER DON'T SE CHARGING NOT JUST ALL of a SUDDEN, HE STOPPED AND I HAVE NO BATTERY at ALL, LIFE I READ that a NEW AC ADAPTER will NOT FIX THIS, WHAT will BE?

  Thank you.

  It may be a problem with the power supply, the internal connections between the charger and the battery, or the battery itself.  I'd put my money on the battery is bad, if the system is with the AC adapter - but there is no real way to tell other than to have the system serviced by a reputable computer repair shop or the manufacturer.  First I remove battery and replace to make sure that the connection is not the problem.  You could just try to replace the battery and see if that solves the problem - make sure you get the CORRECT one for your brand and model of computer or it may not only not work, but could also cause more damage that may already exist (otherwise, be sure before you buy it you can return it for a full refund).  The decision is yours.  This certainly isn't a software problem and it isn't a hardware problem, that we are able to diagnose remotely without the right tools and replace parts to see where the error is located.

  Here is an article on hardware problems troublesshooting tht can help, but I don't think it will be in this case because you do not have access to parts and equipment for a good test: http://elephantboycomputers.com/page2.html#Hardware_Tshoot.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• 12 cell Battery (pluged, load) but not charging

  I bought a new battery 12 cells, I have a hp pavilion dv6 1211ax ;

  the problem is that after I unload completely the battery does not charge after that.

  I managed to load the battery afer the critical battery warning (no questions). * battery health is also good

  its my second battery, I was replaced, but the same thing happened to it. In hp help and support under trobleshoot I checked the status of the battery is showing the battery status is not good need to replace the battery. It may be under your warranty period.

  Please help me...

  Try this, can help.

  battery and power cord 1 / removal

  2 - Press the power button for 30 seconds

  3 reinstall only the power cord for the first start. In Device Manager, expand the entry for the Batteries, do a right-click on the compatible Microsoft ACPI control method battery and select Uninstall .

  4. when the uninstall is complete, shut down the laptop, unplug the AC adapter, reinsert the battery, plug the AC adapter and turn on the laptop. Windows will automatically reinstall the driver

  You have the latest version of the BIOS update your Support/Drivers page?

• All of a sudden does not load. don't have reinstall clean. in the process, not present in applications.

  tried in safe mode. deleted in safe mode. reinstalled. even deleted the folder under the name of proposed assistance. It still seems to load, but nothing comes. I can find it in the process, but it never shows in applications. has failed during a restoration and a saw, then a note "xpcom. Not understand. no update or changes in the config. just stopped working.

  Do a clean reinstall and delete the program folder before Firefox to (re) install a new copy of the current version of Firefox.

  Download a new copy of Firefox and save the file to the desktop.

  • Firefox 26: http://www.mozilla.org/en-US/firefox/all.html

  If possible to uninstall your current version of Firefox to clean the Windows registry and settings in the security software.

  • Do NOT remove the data personal when you uninstall your current version of Firefox, because all profile files will be deleted and you lose personal data such as bookmarks and passwords from other versions of Firefox profiles.

  Delete the program folder Firefox before installing newly downloaded copy of the Firefox installer.

  • (32-bit Windows) "C:\Program Files\Mozilla Firefox\"
  • (Windows 64 bit) "C:\Program Files (x 86) \Mozilla.
  • It is important to remove the Firefox program folder to delete all the files and make sure that there is no problem with the files that were the remains after uninstallation.
  • http://KB.mozillazine.org/Uninstalling_Firefox

  Your bookmarks and other personal data are stored in the Firefox profile folder and will not be affected by a uninstall and (re) install, but make sure that 'delete personal data' is NOT selected when you uninstall Firefox.

  If you keep problems also create a new profile.

  • http://KB.mozillazine.org/Profile_folder_-_Firefox
  • http://KB.mozillazine.org/Profile_backup
  • http://KB.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall