BB 10 Service integration, sample invocation

Similar Questions

• Stop-VM gives message service integration of stop is not available

  I have a Windows Server 2012 running Hyper-V of the machine. I have several virtual machines running.  I have a powershell script that tries to use stop-vm gracefully shut down the virtual machine and restart it.  I'm doing this to put the machine on our field.

  After that the machine is added to the field, I do the command stop-vm (stop-VM - vm).  It works fine most of the time, but I have a machine, a machine of Windows 8 that is stubborn.  Whenever it says service integration of stop is not available.  I did everything for this virtual machine from Windows 8 I did for others.  I have the value judgment of Hyper-V Service start automatically, so I don't know why it's a failure.

  There is no shortage on other machines at random, and when I say randomly I mean it will fail and I run the script again and it will be fine.  I increased the time between the start of the virtual machine and make the command stop-vm, thinking that the VM had just enough time to start properly, but that did not help in this case.  Because of other things, I do I currently have the firewall completely off on the machine.

  This is the first machine of Windows 8, on that I tried this.  I have Windows 7, Windows Server 2008 and Windows Server 2012 virtual machines working with the same script.

  I can stop the machine and Hyper-V from a PowerShell command prompt, just not when the script runs.  Looks like the script.  I'll have to investigate this aspect.

  Have no clue?

  Scott

  As is usually the case after that I have spend some time to post a message on a forum, I found what was wrong in the end.

  I not enable-psremoting to work properly on the virtual machine. When I ran, I received a message on my network on the stock market, and he could not set things up correctly.

  I found this message on the modification of a network of 8 public private windows machines:

  So it took me a while to find this also, I fixed it by searching for troubleshooting as suggested above. In troubleshooting search box (top right) type homegroup, and then select the resolution of the problems of the residential group, even if you're not using home group, part of the diagnosis allows you to change the type of network from public to private/home, I jumped the diagnostic network also step and allowed me to very easily change the type of network.

  I think that was the final sequence to make everything work:

  While signed in as the local administrator (the machine was not in a field at the moment):

  Set of private network. Reset.

  The enable-psremoting value in being logged on as administrator.

  Reset.

  Stop and snapshot of the virtual machine.

  So when I ran my script, I was able to apply the snapshot appropriate to start the virtual machine, join the domain, and then stop the vm without errors.

  I hope that someone else will help one day.

• CRM OnDemand Web service integration

  Hello

  I'm looking for oracle CRM ondemand Web service integration.

  I have the following queries?

  (1) that they have supported for the REST api?

  (2) is there a documentation for the integration of the api (ondemand version R23)?

  Thank you

  Baskar.S

  From now they support SOAP only.

• do not start the service push sample application

  Hi all, I have downloaded and installed the v1.0.0.5 BlackBerry Push Service SDK and tried to install it based on the Quick Start Guide. The first problem was that I couldn't start the Tomcat. After I double-clicked start.bat, I just a blank command window, open for 1-2 seconds and immediately close. I never had the same problem with another application using Tomcat, and can be resolved by using my own installation of Tomcat program. So I do the same thing, I use my own installation of Tomcat program. After that, I get the Tomcat service, but only service non-secure (http), not its secure (https) service. But I think that is not the problem, as long as I can still access it. Then I deploy the sample application (war file: debug-portal, sample-app and pushsdk) to my Tomcat and try to start it. I've got to start the Debug-Portal and pushsdk only, no-sample application. When I tried to start the sample application, I got this message: FAIL - the context path/sample-app Application could not be started, I searched this forum and have had almost similar problem. But those who wrote the display had the problem that all applications could not be started. And he found that it was caused by application_id. He forgot to put the id of the application during installation. I put my application_id (even if it's just false application id, 123456789012345). Can someone help me? How can I install and run the sample application? Thank for any help. PS. I use Windows Server 2003, Tomcat 6.0.20, Oracle 10 g and there's a Glassfish server on my pc (but it was off when I try this push-service application example). Best regards, Novan Ananda

  Well Yes... I forgot to enter the app_id on sample-app - context.xml. all applications work now.

• Broker volumes App error 1920 service integration installation

  When I try to install the integration broker service installation, I get the error 1920 "volumes app VMware Service broker integration service could start. Make sure you have sufficient privileges to start system services.

  Dotnet framework is installed. Version of Integration Services is 2.5.1.1169

  There is no prerequisites listed in the documentation. Are there other things I'm missing?

  OK, I found it.

  Integration service depends on the service host to Script VMware view Horizon who was disabled.

  Apparently, Setup of service broker does not allow this service and that's why error 1920 was received.

  After you have enabled the host to Script VMware view Horizon service installation of the service broker has been successful

• Flex Data Services integrated into Oracle Web Service Proxy

  I am trying to invoke a service proxy web created with Oracle JDeveloper IDE via Flex Data Services.
  I created an assembler class and defined actionscript objects that are required to serialize web service data and then call the dataservice with the id provided in the datamanagement.config file.
  
  When I try to debug the application, the class of the assembler is not affected, I added a breakpoint in the class, but on beforehand the exception is already thrown.
  
  Appears in the following stackTrace:
  [Flex] Order receipt: TCCommand [Cmd: 0, MethodName: null, TrxID: 3.0]
  [Flex] Has started the transaction using jndi name: java: comp / UserTransaction
  [Flex] Transaction committed
  [Flex] Response of the AMF financial/RTMP serialization
  Version: 3
  (Order method = _error (0) trxId = 3)
  (Print object #0 'flex.messaging.messages.ErrorMessage')
  rootCause = null
  destination = "dossierCreation".
  headers = (1 item)
  correlationId = "823B7A23-8463-0D24-0D39-A7FF8080B3A7."
  faultString = "there is an error unhandled on the server. javax/xml/rpc/ServiceFactory.
  messageId = "DF26CC97-B619-EAB1-191F-3FF02B998D49."
  faultCode = "Server.Processing".
  timeToLive = 0.0
  extendedData = null
  faultDetail = null
  clientId = "DF26CC00-580E-7285-F10F-720471C6BBE5".
  timestamp = 1.192524481046E12
  body = null
  

  I found the problem, I had to configure JOTM in my tomcat server to allow transactions.

• Problem in starting service of integration with the CAD / 11g

  Hi friends,

  IM @ the stage of registration of service integration and the repository in DAC 11 g function. I can start the service of good repository in CAD, but facing the question in the start of integration service with DAC, while trying to test the connection im getting a message like

  Failure connecting to BIA_IS!

  I'm not sure the reason for this problem in the DAC. I have also set the necessary environment variables such as INFA_HOME and INFA_DOMAINS_FILE on the domains.infa as file

  INFA_DOMAINS_FILE = C:\Informatica\9.1.0\domains.infa

  Also checked with the file dac_env which has the content below

  REM -----------------------------------------------------
  REM
  REM OF ENVIRONMENT VARIABLES THAT YOU MAY HAVE SET FOR
  REM INFORMATICA GOOD 8.x or 9.x HANDSHAKE.
  REM
  REM INFORMATICA_SERVER_LOCATION refers to the installation of
  REM Informatica components. Example:
  REM C:\Informatica\PowerCenter9.1
  REM
  AREAS OF rem. INFA_FILE_LOCATION designates the location
  REM (including the name) of the file domains.infa
  REM
  REM please make sure to set the correct values for the variables
  REM mentioned above
  REM
  REM -----------------------------------------------------

  Set INFORMATICA_SERVER_LOCATION="C:\Informatica\9.1.0".
  Set DOMAINS_INFA_FILE_LOCATION=C:\Informatica\9.1.0\domains.infa

  Set INFA_CMD_STYLE = 8
  set PATH=C:\Informatica\9.1.0\server\bin;%PATH%
  Set INFA_DOMAINS_FILE = % DOMAINS_INFA_FILE_LOCATION %

  What could be the problem and where to check with the file journal related to the failure of integration in CAD service.

  Thanks in advance.

  Kind regards

  Saro

  Hi guys,.

  The problem is solved. Here it is two precautions to be taken into account.

  *) Make sure you INFA_HOME/Server/bin is @ the end in the PATH variable.

  *) Of each change in the PATH variable, it is best to restart the services (infa and DAC) here and for the changes to take effect.

  Kind regards

  Saro

• Cannot create integration service

  Hi friends,
  
  Try installing informatica 9.1 with the 7.9.6.4 BIAPPS.
  
  As part of it while trying to create the service integration once after that the repository service has been created, im getting the error while allowing it as below
  

  Could not execute action....
  
  The service Is could not be enabled due to the following error:
  
  SF_34004 - Service initialization failed.

  I'm not sure why I get the above error.
  
  I already have configured informatica 9.1 with BIAPPS 7.9.6.3, but @ that point I have strength find the error in the creation of the service of integration.
  
  Kindly help me with the issue of the above integration service.
  
  Thanks in advance.
  
  Kind regards
  Saro

  Hi Benoit,.

  Thanks for the reply. We changed the mode also exclusive to normal, but so too the strength of the error resolved unless and until what I recorded my repository security services user and he gave the privilege of domain service and repository.

  And now all of a sudden the IS created and activated. I'm not sure the reason behind this Setup with BIAPPS 7.9.6.4

  But while I have configured with BIAPPS 7.9.6.3 I force create any user in the repository under the inorder of security to the favor of integration for Up...

  Still not sure why we need to create the user rep in the security for the EAST to work inorder.

  Now my RS and the IS is in place.

  Kind regards
  Saro

• Cisco first below 3.0 and integration of NAM - 3

  Hello

  I have a problem with the service integration first and NAM-2 module below.

  I added NAM - 3 on the first with HTTP and SNMP, but NAM-3 Protocol does not show as Data Source, I also add first Infra to NAM - 3,.

  Anyone know the cause of this problem?

  Thank you very much

  Hello

  Have you made sure your first server Infrastructure running license type insurance?

  NAM/monitoring NetFlow depend on this course of activation.

  Luis

• View the integration queue data

  Hello
  
  I have implemented a workflow creates an integration event and configured to follow the fields suitable, but I was wondering if it is possible to view the data that are followed by the integration event?
  
  There is a record in "Number of Transactions in the queue" which is just a test, but I don't see how to display it, if anyone could help that would be great!
  
  Thank you

  There is no user interface or an Assistant to see data within the queue, the only option is to query the queue using Web Services integration

  Kind regards
  Deepak: kamal

• Installation integration broker

  Hello
  I'm trying to implement messaging between two systems HRMS 8.9 with the version of the tools for both being 8.48
  
  I have a service operation is trying to generate a message on a fieldchange event. Routing out this service received:
  
  the sender node: PSFT_LOCAL
  Receiver node: TARGETNODE
  
  the connector used for nodes that the above is PSFTTARGET (delivered connector)
  
  On the bridge, when I try to ping the nodes, PSFT_LOCAL ping is successful;
  
  However, by trying to ping TARGETNODE, it gives the following error:
  
  Service integration Broker: Destination node does not match the local node. (158 506) +
  
  This exact error is also received when I try to generate messages through the fieldchange peoplecode as well.
  
  appreciate any input!
  
  Vikas

  It should at least contain your fixed IP address also localhost servername directive.

  Nicolas.

• Questions about integration Event(automatic or half automatic)

  Hi all
  
  "At the level of the process, integration events used in conjunction with the workflow features allow you to automatically trigger cross-application process based on the modification of data in Oracle CRM On Demand."
  
  What is automatically "trigger" mean?
  
  All I know is that when changes (create, update, delete, associate, disassociate) records occurs, the event is stored in a queue. External applications should poll the web services integration event and then do surgery.
  
  So it's half automatic, reaction of external applications to the event of integration is not in real time.
  
  So what is "Integration event?

  My point on the integration event queue method, is that it positions the data necessary for an external event without putting a burden on the system. Thus, your analysis is correct, because she wouldn't be in real time but check the queue of waiting every few minutes or so would have little additional processing and you give 'close' results in real time.

• The OSM Service Studio in eclipse installation - missing files in installpack

  Hello
  
  We are trying to install the necessary updates in eclipse according to the 'Oracle Communications Studio Version 3.0.0' document to run Studio Service OSM.
  
  but the eclipse complaining: "Studio of Service order and management services integration (1.0.0.v200805122103 - b276) requires the plug-in"com.mslv.studio.activation (3.0.0)", or compatible." when we try to install com.mslv.studio.provisioning.integration.feature_1.0.0.v200805122103 - b276.jar to a local installation site.
  
  When I look at I have documentation on page 20 I realize that the following modules are missing from the file downloaded with updates V13266 - 01.zip (provided by edelivery.oracle.com):
  
  (1) studio 3.0.0 Activation Service
  (2) studio SRT 3.0.0 Activation Service
  (3) studio 1.0.1 Inventory Service
  
  Someone else has had this problem and solved?
  
  Jesper

  Hello
  I found this article in the topic 'Where to find Activation and inventory for OSM Service Studio Installation of the Plugins' in My Oracle Support

  Objective:
  Where can I find the files of Service authoring environment (alias Studio of Service) for the Activation and inventory?

  The documentation indicates that these elements are needed:
  (1) studio Activation Service
  (2) studio SRT Activation Service
  (3) studio inventory Service

  Solution:
  Download the "Oracle Communications Service creation environment software and Documentation x.x" package of each Media Pack on eDelivery.Oracle.com:
  (Activation) Oracle Communications ASAP
  (Inventory) Oracle Communications unified inventory management
  (Provisioning) Oracle Communications order and service management

  Search on Oracle Communications products.

  Maybe this will help. However after choosing the product range of the Oracle and the program as Sun Solaris(64-bit) Communications, announced it does not show the above package. Try as well. Let me know if you are able to download the package.

  Thank you

• Firefox is save the passwords, but not their record in my keychain (Mac). Why?

  My web passwords are usually stored in Firefox and the Mac Keychain Manager. Recently, I noticed that there are a many saved passwords in Firefox, but not in the Keyring Manager. Why is this, and the problem is in Firefox or Keyring Manager.

  Try:

  • Keychain Services integration: https://addons.mozilla.org/firefox/addon/keychain-services-integration/

• AT & T Communication Manager

  Hello

  I have a year old T61 without the wireless card built-in. I use access connections.

  I just finished a clean install of Windows XP on it and I want to use my AT & T 3G Broadband card. It seems that the dial-up connections now supports 3G, but I don't know if I still need to install the communications manager. I'm looking on the net but no luck to find an answer. Thank you.

  Best regards Michael G.

  Michael,

  I have a T60p with the card integrated Sierra Wireless.

  I used to use the AT & T Communications Manager to start and stop the service of AT & T Wireless.

  Then, after a session of ThinkVantage System Update, AT & T Communications Manager has stopped working properly. It would do funny things, and it took three or four tries to get finally connected to the cell tower nearby.

  Finally discovered that, after the update of the system, the Lenovo program access connections has figured out that the machine has the map service integrated wireless and interfered with the AT & T Communications Manager.

  So, I stopped using the AT & T Communications Manager and now use logins to start and stop the wireless service. It's the same thing, except that the dial-up Connections applet does not show you the intensity of the signal.

  My experience leads me to think that you don't need AT & T Communications Manager, as long as you can get logins to work.

  Centex