do not start the service push sample application

Similar Questions

• Receive automatic updates for Windows XP "error 127: the specified procedure could not be found." Also "error 0 x 80240036: could not start the service automatic updates on local computer»

  Update CPU which proved later to be bad.  Replaced by original CPU.  Re-installed Windows XP Home using a slipstreamed CD that I burned the original non - OEM drive that has Service Pack 2.  Integrated Service Pack 3 which I got from the MS. site  Everything works well except for Windows Update.  The setting seem to be correct in Administrative Tools/Services.  The status of the Service is "stopped".  When I try to start the automatic updates from Administrative Tools/Services I receive "error 127: the specified procedure could not be found."  Also "error 0 x 80240036: could not start the service automatic updates on local computer»  Used the range of anti-virus and malware and found nothing.  Currently using Avast 7.0.1426.  I also used various tools of Fix - It MS nothing helps.  Any help would be greatly appreciated.  Thank you.

  Hello

  1. what application or antivirus security suite is installed and your current subscription?

  2 Norton (another) or a McAfee application ever installed on this machine?

  3. What are the fix applications that you used so far to try to fix this problem?

  Try the next method and check if that helps you with the question of the 127 error you receive.

  Method 1: Rdding the DLL file by doing the following:

  1. Click Start and click Run, in the search box type CMD and press to enter.
  2. right click on CMD in the list and click "Run as Administrator".
  3. type the following command and press ENTER. Regsvr32 msvcp71.dll
  4. close the command prompt window.

  Method 2: run the file system (CFS) Checker:

  (Note: you need an XP installation disk to start the System File Checker search.)

  The SFC command is used to detect and resolve problems with the files on Windows XP and Windows Vista computers. This command allows you to launch the Windows File Protection Service and allows you to analyze all integrity-protected Windows files and replace all problematic files identified.

  1. click on start, and in the box to start, search type CMD
  2. right click on CMD in the list and click "Run as Administrator"
  3. type the following command and press ENTER. Sfc/scannow
  4. close the command prompt window.

  For more information on scan SFC (System File Checker), please look in the link mentioned below.

  http://support.Microsoft.com/kb/310747

  I hope this helps.

• Windows could not start the service audio windows on the local computer. Error 1067: The process is completed in an unexpected way!

  Please help me! ....
  Audio service does not
  I tried Services.msc and tried starting windows Audio...
  The following error has come!
  Windows could not start the service audio windows on the local computer. Error 1067: The process is completed in an unexpected way!
  There is a sign of X in the audio icon...
  and when I click on this audio icon... TROUBLESHOOTER OPENS...
  all this happened all of a sudden!
  Please help me!
  Thank you.
  Nischal Sp

  Please provide the error screenshot more better assitance. Also, try this:

  Try to copy and merge the audio from another Windows 8 or better service.

  You can do this by going to the Registry Editor (make sure that the other computer is also a 32-bit system)

  Go to HKLM/system/current control set/services/audiosrv click audiosrv and then on the file menu, select export and save the file to a USB key or drive.

  While copy on your machine and merge. Then restart your system.

  Otherwise reset Windows 8:

  http://www.kapilarya.com/how-to-reset-Windows-8

  Good luck once again :)

• When the Active Server is shut down normally, the passive server does not start the service

  Hi friends,

  I have a question for the vCenter heartbeat,

  When the Active Server is shut down normally, the passive server does not start the service.

  Is this normal?

  Thank you.

  He starts the services on the passive server because the correct judgment still leaves the server active as being the "main".

  Stop all services of it properly. And after it comes back online replication starts as before, so that no service must be started on both servers. (in this case that you will have questions)

  Please note that on a server computer, you have 2 possibilities to "stopping down": the BONE and the option of status and control of the server Vcenter Heartbeat

  See you soon!

• Windows could not start the service on the Local Computer Security Center. Error 1068: The dependency service or group could not start

  I use Windows 7 Home Premium

  My windows Security Center cannot be started. I spent to the Microsoft Management Console and tried to launch security through Services Center, but when I do I get the following message is displayed:

  "Windows failed to start the service on the Local Computer Security Center.

  "Error 1068: the dependency service or group could not start"
  Help, please.
  Thank you.

  Hi Rohit Chettri ,

  (I am not good in English)

  I am trying no operation troubleshooting you mentioned. I have it set for myself.

  I clicked on something related to the denfence in the heart of the action and when I restarted my computer is off almost all services. I couldn't even connect to the internet

  I went to the Configuration System (msconfig)-> services-> active tab all services and restart. After that my computer works normally.

  In any case thanks a lot Rohit Chettri.

• Disk Defragmenter could not start the service task scheduler is not running. Start the Task Scheduler service, and then try again.

  im getting this message if I want to run Disk Defragmenter... "Disk Defragmenter cannot start the Task Scheduler service is not running. Start the Task Scheduler service and try again. "tried to start the Task Scheduler on services.msc, but it gives me the message" windows could not start the Task Scheduler on the computer local error 2: the system cannot find the file specified. '. »

  Hello

  See if run the checker (SFC.exe) system files using the parameter/scannow help.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7:
  http://support.Microsoft.com/default.aspx/KB/929833
  Ramesh Srinivasan, Microsoft MVP [Windows Desktop Experience]

• Windows could not start the service Windows search on the computer Local (Error 1053)

  Windows Search does not work on the start menu, nor IE8 remembers the URL history more.

  I tried the procedure described in this post (does not work): http://social.answers.microsoft.com/Forums/en-US/w7files/thread/8d68d244-afca-4006-a6eb-57d4dd9d58df

  I ran a scan sfc, who has not returned this any integrity issues have been detected.  I also tried to disable the Windows search feature to "Turn Windows features on or off", rebooted and tried reactivation, without success.

  I tried to create a new profile, but the same problem occurred.  I discovered that WSearch service does not work.  When I try to enable it, I get the following error:

  ---------------------------
  Services
  ---------------------------
  Windows could not start the Windows Search service on Local computer.

  Error 1053: The service did not demand launch or control in a timely

  I did some searching on the forum, but I was unable to find a solution to this problem.  Any help would be greatly appreciated.

  Yep, http://www41.zippyshare.com/v/30503880/file.html

  Unzip it, and then apply this Difficulty REG. Ramesh Srinivasan, Microsoft MVP [Windows Desktop Experience]

• computer will not start the service, access denied

  I installed this windows service: http://code.msdn.microsoft.com/windowsdesktop/CppWindowsService-cacf4948

  and when I try to start the service in the GCS I get the error 5 error message: access denied
  my account is set to admin and I even tried to use the default admin user, but still it will not work

  Hello

  From the description above, you get the error code 5 access denied cannot start the service.

  Method 1: I suggest you perform the clean boot and check if the problem persists.

  How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8
  http://support.Microsoft.com/kb/929135

  Note: Follow How to reset the computer to start as usual after a clean boot troubleshooting article KB929135 to reset the computer in normal mode.

  Method 2: I suggest you to scan SFC. Scan SFC will be scans all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  Post us the results once you try the steps above.

• Could not start the service windows in Windows 7 firewall

  I can't start my windows firewall service. The following error appears while you try to start the service.

  "Windows didn't start the Windows Firewall on the Local computer." For more information, see the system event log. If it is a non-Microsoft service, contact the service vendor and refer to service particular 5 error code. »

  My system has a virus in the morning and removed the virus now, but i can't seem to start the firewall.

  I use MCAFee antivirus software.

  Please help me solve this problem.

  Hello

  Thank you for keeping us posted.

  I would suggest trying the following steps and check:

  Method 1:

  Run a virus scanner and check:

  Virus is known to cause these problems. Scan your computer for the Microsoft Security Scanner, which allows to get rid of viruses, spyware and software malware.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner expire after 10 days from the date of installation.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Method 2:

  Note: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  Save the registry - http://windows.microsoft.com/en-US/windows7/Back-up-the-registry

  I suggest you try the steps of Nirmal S from this link and check:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/i-get-an-error-code-0x6d9-when-i-turn-on-the/3f7f6e10-10c9-44C9-9EF7-9a041d5aa705?msgId=57b364f2-1521-4CB4-9835-219fa6530f60

  Hope this information helps. Answer us queries windows and we will be happy to help.

• Could not start the Services "Apple Moble device" in windows (Window 7) from my laptop

  I am unable to start the Services of "Apple Moble device" in windows (using windows 7) to my laptop in order to use iTunes software to work with my iPad.

  Every time when I tried to work with my iPad with the installed iTunes, which prompted because of the Services 'Apple Moble Device"not started, so cannot use the iPad with iTunes. I tried several times to launch the "device Moble Apple' Services manually in the Control Panel, but everytimefailed.

  No matter, I reboot the machine, or remove the iTune and installed it again, it has always failed.

  However, my iPad works fine with other computers, so it should not be the problem of the iPad. What will be the problem with my Windows 7 on my desktop? Will there be other software or services in my laptop had to start or stop me from starting Services "Apple Mobile Device"?

  Hello

  Method 1:  Check that the Apple Mobile Device Service is installed and works using the software component Services MMC snap-in of components:

  (a) on the start menu, click search.

  (b) type services.msc, and then click OK. You will see a list of services.

  (c) view the list alphabetically and make sure "Apple Mobile Device Service" status is "started".

  (d) if the State does not indicate that the service is started, right-click Apple Mobile Device Service and choose Start from the context menu.

  (e) if the service is installed and started, right-click the service and select Restart from the context menu.

  Method 2: If the steps above did not help follow the steps described in the following link and check if that helps.

  http://support.Apple.com/kb/TS1538

  http://support.Apple.com/kb/TS1567

• Windows could not start the service on the Local computer Windows event log. Windows 2008 R2 server

  When I try to start the event log service can I have on my server (Windows 2008 R2), I get the following error:

  "Windows didn't start the service on the Local computer Windows event log."

  Error 2: the system cannot find the specified file. »

  Hello

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the public on the TechNet site. Please post your question in the below link: http://social.technet.microsoft.com/Forums/en/category/windowsserver/

• Could not start the service on the Local media player network sharing computer.

  Error 3: could not find the path specified th.

  Hello

  · Do you remember all the recent changes on the computer before the show?

  · What is the service pack installed?

  Run the checker system files on the computer. Link, we can see: Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe): http://support.microsoft.com/kb/310747

  Note that: if he asks you the service pack CD, follow these steps from the link: you are prompted to insert a Windows XP SP2 CD when you try to run the tool on a Windows XP SP2 computer system File Checker: http://support.microsoft.com/kb/900910 (valid for Service pack 3)

  How to troubleshoot possible causes of Internet connection problems in Windows XP: http://support.microsoft.com/kb/314095

• Windows could not start the service on Local computer print spooler. Error 1053: The service did not demand launch or timely control.

  My printer was working fine and then today I received this message. Tried to strat as the spooler services but is unresponsive to start and I can stop him either. Heeeelp.

  Hi Slobodan,

  Thank you for posting.

  1 is connected to the domain of the computer?

  Please see the link.

  FIX: You receive an "error 1053: the service has failed to demand launch or control in a timely" error message when you stop or pause a managed Windows service

  http://support.Microsoft.com/kb/839174

• Could not start the print of Win 7 64 bit spooler

  Hello world. Earlier, I installed Windows 7 updates (I can't remember the exact date) and when I tried a few days then to print something, I could not and my printer had the yellow flag of problem in the control panel. It seems that there is a problem loading the print spooler after trying to start it, I get the following error message.

  Windows could not start the service on local computer print spooler. Error 1053: the service did not demand launch or control in a timely.

  The printer has been tested on different computers and a laptop and works very well. After some research, I found many messages on the same problem as others have some and tried all of the solutions posted here, but nothing seems to work. All the drivers are up to date, all dependencies of print spooler are running, I even uninstalled Adobe reader and I use a different now. The printer is now just an expensive paperweight. Any help would be appreciated. Thank you.

  IEBHO.dll seems to cause problems with some applications.

  It cannot be linked to questions of print spooler.

  However, I suggest trying to remove the IEBHO.dll which seems to be one part of iMesh MediaBar.

  You can uninstall iMesh MediaBar using "uninstall a program"?

  I also run a scan with the two following applications just to see if they do anything:

  TDSSKiller:

  http://support.Kaspersky.com/FAQ/?QID=208283363

  Malwarebytes anti-malware (free version - decline the invitation to install the full version of trial) - do a "Quick Scan":

  http://www.Malwarebytes.org/products/malwarebytes_free

• Could not start the Windows Vista firewall

  Hi all

  I can't start the Windows Firewall service in anyway.
  I can't open it via Control Panel, as it is said simply: "the Windows Firewall settings cannot poster because the asscioated service is not running. You want to start the Windows Firewall service? »
  I click "Yes", then he said: 'Windows cannot start the Windows Firewall service. There is no error code indicated.
  I tried running "wf.msc" using the Microsoft Management Console. When this window appears, he says: "there was an error opening the Windows Firewall with advanced snap-in security.; The Windows Firewall with Advanced Security snap could not load. Restart the Windows Firewall service on the computer that you are managing. "Error code: 0x6D9.
  As it seems, I can not start it this way or the other.
  I pressed Ctrl + Alt + Delete and click on the Services tab, then click services on the bottom, and this opens the Services window.
  In the new Services window, I try to start the service "Windows Firewall". I get a message saying: "Windows could not start the Windows Firewall service on the Local computer.; Error 1068: the dependency service or group could start. »
  Therefore, it does not. The service is set to automatic.
  I found another process called 'Base filtering engine', which I discovered is related to the use of the Windows Firewall service. Then, that I try to start this service, and he said: "Windows has no start the engine service of filtering based on Local computer." Error 0 x 80320009: an object with this GUID or LUID already exists. »
  Still, I can't find a way to fix the problem. In addition, the service is set to automatic.
  So if someone could help me, give me ideas or tell me how to solve the problem, it would be greatly appreciated. Thanks in advance.
  P. S. sometimes, when I type things in the command prompt, I get a message saying that "the requested operation requires a rise." What it means
  ?
  EDIT:
  The base filtering engine
  IKE and AuthIPsec Keying Modules

  Internet Connection Sharing (ICS)

  IPsec policy agent

  Routing and remote access

  Windows event collector

  Windows Firewall

  All of these services don't work, with each saying "Windows did not start the * service * service on Local computer.; Error 1068: The dependency service or group could start. ", with the exception of the Base Filtering Engine service.

  EDIT:

  I believe that the motor of filter of Bae is the root cause of the problem, because when I try to start it, it says "Windows cannot start the engine service of filtering based on Local computer. Error 0 x 80320009: an object with this GUID or LUID already exists. ", so that all the other programs on this service, said depedent" Windows did not start the * service * service on Local computer. " ; Error 1068: The dependency service or group could start. ».

  EDIT:

  Hello everyone, I solved the problem. The problem is a corrupted, file called "secdrv.sys. To resolve this problem, I had to first download the file "secdrv.sys' out of my operating system CD. To do this, you must create a partition and "mount" a file on CD, on the newly created partition. The file you have to climb is and is called: "*: \sources\install.wim. Extending .wim means a "file system Windows Image" and to see what files it contains, you will need to download what we call the "Windows Automated Installation Kit". Explicit instructions on the installation procedure and where to get this program, is here: "http://www.vistax64.com/tutorials/86959-access-vista-install-dvd-files.html". Once you have the file mounted, just search the area mounted for "secdrv.sys", then copy and paste it in "C:\Windows\System32\drivers" or that where the drivers from your system. After that, restart and the BFE service and all of its dependencies should work properly. Thanks for the good help like SpiritX.

  Hello everyone, I solved the problem. The problem is a corrupted, file called "secdrv.sys. To resolve this problem, I had to first download the file "secdrv.sys' out of my operating system CD. To do this, you must create a partition and "mount" a file on CD, on the newly created partition. The file you have to climb is and is called: "*: \sources\install.wim. Extending .wim means a "file system Windows Image" and to see what files it contains, you will need to download what we call the "Windows Automated Installation Kit". Explicit instructions on the installation procedure and where to get this program, is here: "http://www.vistax64.com/tutorials/86959-access-vista-install-dvd-files.html". Once you have the file mounted, just search the area mounted for "secdrv.sys", then copy and paste it in "C:\Windows\System32\drivers" or that where the drivers from your system. After that, restart and the BFE service and all of its dependencies should work properly. Thanks for the good help like SpiritX.